SnS2/graphene nanocomposite: A high rate anode material for lithium ion battery

In this work,via a facile solvothermal route,we synthesized an anode material for lithium ion batteries(LIBs)—SnS_2 nanoparticle/graphene(SnS_2 NP/GNs) nanocomposite.The nanocomposite consists of SnS_2nanoparticles with an average diameter of 4 nm and graphene nanosheets without restacking.The SnS_2 nanoparticles are firmly anchored on the graphene nanosheets.As an anode material for LIBs,the nanocomposite exhibits good Li storage performance especially high rate performance.At the high current rate of 5,10,and 20 A/g,the nanocomposite delivered high capacities of 525,443,and 378 mAh/g,respectively.The good conductivity of the graphene nanosheets and the small particle size of SnS_2contribute to the electrochemical performance of SnS_2 NP/GNs.     

二氧化铈-铈掺杂锰氧化物纳米复合物高效紫外-可见-红外光热催化净化乙酸乙酯

乙酸乙酯是一种重要的有机溶剂,广泛应用于涂料、粘合剂和塑料及石化等工业生产,但作为一种主要的挥发性有机污染物(VOCs),其对大气环境造成严重污染.目前工业上主要采用负载型贵金属催化剂催化燃烧的方法进行净化处理,但该方法存在催化剂价格昂贵和能耗高的问题,迫切需要开发活性高、稳定性好、成本低及能耗小的催化新方法和新材料....     

Fast and facile fabrication of a graphene oxide/titania nanocomposite and its electro-responsive characteristics

A graphene oxide/titania (GO/TiO(2)) nanocomposite was fabricated by a facile electrostatic attraction method. With high polarization of GO particles and a relatively high dielectric constant of TiO(2) nanoparticles, the GO/TiO(2) nanocomposite is observed to be a potential electro-responsive electrorheological material under an applied electric field.     

Nanostructured oxide-based powders: investigation of the growth mode of the CeO2 clusters on the YSZ surface

CeO(2)/YSZ nanocomposite powders, characterized by increasing Ce/Zr atomic ratio, were obtained by depositing, by wet impregnation, different amounts of CeO(2) on the yttria-stabilized zirconia (YSZ) surface. These powders were characterized by means of X-ray photoelectron spectroscopy, transmission electron microscopy, energy dispersive spectroscopy, and X-ray diffraction. Experimental results allow us to obtain interesting information concerning the growth mode, the morphology, and the dimensions of the CeO(2) clusters on the YSZ supporting surface. A 3-D growing mechanism was observed for the CeO(2) nanoparticles. With increasing Ce/Zr atomic ratio the CeO(2) clusters become more and more spherical. Moreover, XPS data also show the presence of Ce(III) and Ce(IV) ions at the interface supported/supporting oxides.     

Overview of Polyvinyl Alcohol Nanocomposite Hydrogels for Electro‐Skin,Actuator, Supercapacitor and Fuel Cell

The properties of polyvinyl alcohol (PVA) nanocomposite hydrogels influenced by nanoparticles are reviewed. Various kinds of nanoparticles with excellent mechanical and electrical properties have been introduced into PVA hydrogel to produce stretchable and conductive PVA nanocomposite hydrogel. Understanding the mechanism between the matrix of PVA hydrogel and nanoparticles is therefore critical for the development of PVA nanocomposite hydrogels. This review focuses on the nanoparticles include carbon nanotubes, graphene oxide and metal nanoparticles, and describes the effects of nanoparticles on the mechanical and conductive properties of PVA nanocomposite hydrogels. A new promising area of soft stretchable PVA nanocomposite hydrogel is highlighted for possible applications. Finally, a brief outlook for future research is presented.     

Green synthesis of Pt/CeO2/graphene hybrid nanomaterials with remarkably enhanced electrocatalytic properties

We developed a facile strategy for clean synthesis of Pt/CeO(2)/graphene nanomaterials with remarkably enhanced catalytic properties. The graphene oxide (GO) could be used as an oxidant to oxidize Ce(3+) into CeO(2) NPs, and l-lysine was used as a linker to realize the in situ growth of Pt NPs around CeO(2) NPs dispersed on graphene.     

Polyacrylamide/reduced graphene oxide-Ag nanocomposite as highly efficient antibacterial transparent film

In this study, preparation and characterization of polyacrylamide/reduced graphene oxide-Ag (PAM/rGO-Ag) nanocomposites as a new nanocomposite film were investigated. First, PAM/GO nanocomposite was synthesized by in situ polymerization strategy. Afterward, highly stable and uniformly distributed silver nanoparticles (Ag NPs) have been obtained with PAM/GO nanocomposite as nanoreactors via in situ reduction of silver nitrate (AgNO₃) using sodium borohydride (NaBH₄) as reducing agent. In addition, the prepared PAM/rGO-Ag nanocomposite was thermally annealed in order to achieve high-performance nanocomposite film with antimicrobial activities. The prepared nanocomposite was characterized by XRD, FT-IR, SEM, TEM and TGA. The obtained results demonstrate that the silver nanoparticles were well decorated and dispersed on the graphene oxide nanosheets. In fact, the GO nanosheets and polyacrylamide chains act as a support and stabilize the Ag nanoparticles. Moreover, antimicrobial activities of the films were also examined, and the films containing well-dispersed and stabilized Ag nanoparticles showed outstanding antibacterial activity.     

In situ chemical synthesis of SnO2–graphene nanocomposite as anode materials for lithium-ion batteries

An in situ chemical synthesis approach has been developed to prepare SnO₂–graphene nanocomposite. Field emission scanning electron microscopy and transmission electron microscopy observation revealed the homogeneous distribution of SnO₂ nanoparticles (4–6 nm in size) on graphene matrix. The electrochemical reactivities of the SnO₂–graphene nanocomposite as anode material were measured by cyclic voltammetry and galvanostatic charge/discharge cycling. The as-synthesized SnO₂–graphene nanocomposite exhibited a reversible lithium storage capacity of 765 mAh/g in the first cycle and an enhanced cyclability, which can be ascribed to 3D architecture of the SnO₂–graphene nanocomposite.     

Electrochemical and theoretical study of novel functional porous graphene aerogel-supported Sm2O3 nanoparticles for supercapacitor applications

Journal of Solid State Electrochemistry - A graphene aerogel cross-linked by p-phenylenediamine (PPDA) composite with Sm2O3 nanoparticles (AP.Sm) was synthesized as a novel nanocomposite via a...     

Fabrication of magnetically separable palladium–graphene nanocomposite with unique catalytic property of hydrogenation

One step solvothermal route has been developed to prepare a well dispersed magnetically separable palladium–graphene nanocomposite, which can act as a unique catalyst against hydrogenation due to the uniform decoration of palladium nanoparticles throughout the surface of the magnetite–graphene nanocomposite and hence can be reused for several times. In addition to catalytic activity, palladium nanoparticles also facilitate the formation and homogeneous distribution of magnetite (Fe₃O₄) nanoparticles onto the graphene surfaces or else an agglomerated product has been obtained after the solvothermal reduction of graphene oxide in presence of Fe³⁺ alone.     

Immobilization of In2O3 nanoparticles on the surface of reduced graphene oxide

This communication describes a new method for immobilizing indium oxide nanoparticles (∼20 nm) on the surface of reduced graphene oxide. Dispersion of graphene oxide with added In₂O₃ nanoparticles was treated in supercritical isopropanol, both a reducing agent of graphene oxide and a reaction medium. The resulting nanocomposite was characterized by different methods of physical and chemical analysis.     

Graphene Nanosheets Decorated with Copper Oxide Nanoparticles for the Photodegradation of Methylene Blue

Textile industries extensively use colorants, such as methylene blue, and if disposed off untreated, they contaminate the effluent streams, causing a severe impact on the environment and aquatic life. Photocatalytic degradation has been found as an inevitable approach to treat them. Herein, we decorated the copper oxide nanoparticles on graphene nanosheets during the reflux process. The resultant copper oxide/graphene nanocomposites were analyzed for structural and functional attributes. It was observed that on increasing the copper oxide contents, the z-average size of the resultant nanocomposites decreased. The X-ray diffraction analysis demonstrated the crystalline nature of the nanocomposite. The surface morphology of the copper oxide nanoparticles appeared to be spherical and that of the copper oxide/graphene composite somehow wrinkled. The infrared analysis indicated successful intercalation of precursors in the nanocomposite. The bandgap of copper oxide/graphene nanocomposites varied in the range of 1.03-1.30 eV, which indicated their effective photocatalytic activity. The results demonstrated that after 120 min of exposure, the methylene blue removal efficiency reached 94.0%, 92.2%, and 89.4%(mass fraction) on the copper oxide/graphene nanocomposite at copper oxide nanoparticles to graphene nanosheets ratios of 1:1, 1.5:1, and 2:1 (mass ratio), respectively. The photodegradation performance of the prepared nano-catalyst was found satisfactory even after five cycles.     

A General Strategy Towards Encapsulation of Nanoparticles in Sandwiched Graphene Sheets and the Synergic Effect on Energy Storage

A novel and universal approach towards the unique encapsulation of nanoparticles in the sandwiched graphene sheets is presented here. In the method, a low‐cost, sustainable and environmentally friendly carbon source, glucose, is firstly applied to yield the high‐quality, uniform and coupled graphene sheets in a large scale, and the pre‐fabricated hydrated nanosheets act as the sacrificial templates to generate the enveloped metallic nanoparticles. After controllable oxidation or removal of the encapsulated nanoparticles, sandwiched nanocomposite with oxidizes nanoparticles encapsulated in graphene sheets or pure phase of sandwich‐like and coupled graphene sheets would be achieved. Moreover, the synergic effect on energy storage via Li‐ion batteries is solidly verified in the Co₃O₄@graphene nanocomposite. More importantly, the unique structure of the nanoparticles‐encapsulated sandwiched graphene sheets will definitely result in additional applications, such as biosensors, supercapacitors and specific catalyses. These results have enriched the family of graphene‐based materials and recognized some new graphene derivatives, which will be considerably meaningful in chemistry and materials sciences.     

The Vital Role of Buffer Anions in the Antioxidant Activity of CeO(2) Nanoparticles

Cerium oxide (CeO(2) ) nanoparticles display excellent antioxidant properties by scavenging free radicals. However, some studies have indicated that they can cause an adverse response by generating reactive oxygen species (ROS). Hence, it is important to clarify the factors that affect the oxidant/antioxidant activities of CeO(2) nanoparticles. In this work, we report the effects of different buffer anions on the antioxidant activity of CeO(2) nanoparticles. Considering the main anions present in the body, Tris-HCl, sulfate, and phosphate buffer solutions have been used to evaluate the antioxidant activity of CeO(2) nanoparticles by studying their DNA protective effect. The results show that CeO(2) nanoparticles can protect DNA from damage in Tris-HCl and sulfate systems, but not in phosphate buffer solution (PBS) systems. The mechanism of action has been explored: cerium phosphate is formed on the surface of the nanoparticles, which interferes with the redox cycling between Ce(3+) and Ce(4+) . As a result, the antioxidant activity of CeO(2) nanoparticles is greatly affected by the external environment, especially the anions. These results may provide guidance for the further practical application of CeO(2) nanoparticles.     

Design and Preparation of Graphene/Fe2O3 Nanocomposite as Negative Material for Supercapacitor

The development of high specific capacitance electrode materials with high efficiency, scalability and economic feasibility is significant for the application of supercapacitors, however, the synthesis of electrode material still faces huge challenges. Herein, graphene(G)/Fe₂O₃ nanocomposite was prepared via a simple hydrothermal method connected with subsequent thermal reduction process. Scanning electron microscopy(SEM) and transmission electron microscopy(TEM) results showed rod-like Fe₂O₃ nanoparticles were prepared and well-dispersed on graphene layers, providing a rich active site and effectively buffering the aggregation of Fe₂O₃ nanoparticles in the process of electrochemical reaction. The specific capacitance of the obtained G/Fe₂O₃ nanocomposite as negative electrode for supercapacitor was 378.7 F/g at the current density of 1.5 A/g, and the specific capacitance retention was 88.76% after 3000 cycles. Furthermore, the asymmetric supercapacitor(ASC) was fabricated with G/Fe₂O₃ nanocomposite as negative electrode, graphene as positive electrode, which achieved a high energy density of 64.09 W∙h/kg at a power density of 800.01 W/kg, maintained 30.07 W∙h/kg at a power density of 8004.89 W/kg, and retained its initial capacitance by 78.04% after 3000 cycles. The excellent result offered a promising way for the G/Fe₂O₃ nanocomposite to be applied in high energy density storage systems.     

Synthesis of a hierarchical three-component nanocomposite structure system with enhanced electrocatalytic and photoelectrical properties

Effective control over the morphology and size of Pd/Pt nanoparticles is currently of immense interest because their electronic, optical, and catalytic properties are superior to pure platinum nanoparticles. However, control over the nanoparticle shape is still challenging. Therefore, a novel design and synthetic route needs to be developed to obtain a high-performance catalyst. Herein, a hierarchical three-component nanocomposite structure system (HTNSS) composed of graphene, TiO(2), and Pd@Pt core-shell nanoparticles was designed and synthesized by a sequential strategy that focuses on constructing the monolithic structure rather than limited single-component counterparts. The resulting composites were characterized by various techniques, which showed that the Pd@Pt core-shell nanoparticles were preferentially deposited on the peripheral interface of the graphene and TiO(2) nanoparticles. The photoelectrical and catalytic performances were obviously improved relative to the commercially available E-TEK Pt/C owing to their synergistic effect.     

还原氧化石墨烯-硒化银纳米复合材料的水热合成与表征及其活性氧物种产生(英文)

A visible-light photocatalyst containing Ag2Se and reduced graphene oxide(RGO) was synthesized by a facile sonochemical-assisted hydrothermal method. X-ray diffraction, scanning electron mi-croscopy with energy-dispersive X-ray analysis, and ultraviolet-visible diffuse reflectance spectros-copy results indicated that the RGO-Ag2Se nanocomposite contained small crystalline Ag2Se nano-particles dispersed over graphene nanosheets and absorbed visible light. The high crystallinity of the nanoparticles increased photocatalytic activity by facilitating charge transport. N2 adsorp-tion-desorption measurements revealed that the RGO-Ag2Se nanocomposite contained numerous pores with an average diameter of 9 nm, which should allow reactant molecules to readily access the Ag2Se nanoparticles. The RGO-Ag2Se nanocomposite exhibited higher photocatalytic activity than bulk Ag2Se nanoparticles to degrade organic pollutant rhodamine B and industrial dye Texbrite BA-L under visible-light irradiation(λ 420 nm). The generation of reactive oxygen spe-cies in RGO-Ag2Se was evaluated through its ability to oxidize 1,5-diphenylcarbazide to 1,5-diphenylcarbazone. The small size of the Ag2Se nanoparticles in RGO-Ag2Se was related to the use of ultrasonication during their formation, revealing that this approach is attractive to form po-rous RGO-Ag2Se materials with high photocatalytic activity under visible light.     

Reduced graphene oxide-immobilized iron nanoparticles Fe(0)@rGO as heterogeneous catalyst for one-pot synthesis of series of propargylamines

Research on Chemical Intermediates - Iron nanoparticles immobilized on reduced graphene oxide (rGO), nanocomposite Fe(0)@rGO 1, were prepared in situ by reduction of GO and FeCl3·6H2O using...     

Facile synthesis of silicon nanoparticles inserted into graphene sheets as improved anode materials for lithium-ion batteries

Silicon nanoparticles have been successfully inserted into graphene sheets via a novel method combining freeze-drying and thermal reduction. The as-obtained Si/graphene nanocomposite exhibits remarkably enhanced cycling performance and rate performance compared with bare Si nanoparticles for lithium-ion batteries.     

High reversible capacity and rate capability of ZnCo2O4/graphene nanocomposite anode for high performance lithium ion batteries

A facile and straightforward method was adopted to synthesize ZnCo₂O₄/graphene nanocomposite anode. In the first step, pure ZnCo₂O₄ nanoparticles were synthesized using urea-assisted auto-combustion synthesis followed by annealing at a low temperature of 400 °C. In the second step, in order to synthesize ZnCo₂O₄/graphene nanocomposite, the obtained pure ZnCo₂O₄ nanoparticles were milled with 10 wt% reduced graphene nanosheets using high energy spex mill for 30 s. The ZnCo₂O₄ nanoparticles, with particle sizes of 25–50 nm, were uniformly dispersed and anchored on the reduced graphene nanosheets. Compared with pure ZnCo₂O₄ nanoparticles anode, significant improvements in the electrochemical performance of the nanocomposite anode were obtained. The resulting nanocomposite delivered a reversible capacity of 1124.8 mAh g⁻¹ at 0.1 C after 90 cycles with 98% Coulombic efficiency and high rate capability of 515.9 mAh g⁻¹ at 4.5 C, thus exhibiting one of the best lithium storage properties among the reported ZnCo₂O₄ anodes. The significant enhancement of the electrochemical performance of the nanocomposite anode could be credited to the strong synergy between ZnCo₂O₄ and graphene nanosheets, which maintain excellent electronic contact and accommodate the large volume changes during the lithiation/delithiation process.