Development and validation of an RP-HPLC method for quantitative determination of vanillin and related phenolic compounds in Vanilla planifolia

A simple and fast method was developed using RP-HPLC for separation and quantitative determination of vanillin and related phenolic compounds in ethanolic extract of pods of Vanilla planifolia. Ten phenolic compounds, namely 4-hydroxybenzyl alcohol, vanillyl alcohol, 3,4-dihydroxybenzaldehyde, 4-hydroxybenzoic acid, vanillic acid, 4-hydroxybenzaldehyde, vanillin, p-coumaric acid, ferulic acid, and piperonal were quantitatively determined using ACN, methanol, and 0.2% acetic acid in water as a mobile phase with a gradient elution mode. The method showed good linearity, high precision, and good recovery of compounds of interest. The present method would be useful for analytical research and for routine analysis of vanilla extracts for their quality control.     

Comparison of extraction techniques and modeling of accelerated solvent extraction for the authentication of natural vanilla flavors

Accelerated solvent extraction (ASE) of vanilla beans has been optimized using ethanol as a solvent. A theoretical model is proposed to account for this multistep extraction. This allows the determination, for the first time, of the total amount of analytes initially present in the beans and thus the calculation of recoveries using ASE or any other extraction technique. As a result, ASE and Soxhlet extractions have been determined to be efficient methods, whereas recoveries are modest for maceration techniques and depend on the solvent used. Because industrial extracts are obtained by many different procedures, including maceration in various solvents, authenticating vanilla extracts using quantitative ratios between the amounts of vanilla flavor constituents appears to be unreliable. When authentication techniques based on isotopic ratios are used, ASE is a valid sample preparation technique because it does not induce isotopic fractionation.     

Rapid Sample Screening Method for Authenticity Controlling of Vanilla Flavours Using Liquid Chromatography with Electrochemical Detection Using Aluminium-Doped Zirconia Nanoparticles-Modified Electrode

A rapid and sensitive technique for frauds determination in vanilla flavors was developed. The method comprises separation by liquid chromatography followed by an electrochemical detection using a homemade screen-printed carbon electrode modified with aluminium-doped zirconia nanoparticles (Al-ZrO₂-NPs/SPCE). The prepared nanomaterials (Al-ZrO₂-NPs) were characterized by using X-ray diffraction (XRD), transmission electron microscopy (TEM) and energy dispersive X-ray (EDX). This method allows for the determination of six phenolic compounds of vanilla flavors, namely, vanillin, p-hydroxybenzoic acid, p-hydroxybenzaldehyde, vanillyl alcohol, vanillic acid and ethyl vanillin in a linear range between 0.5 and 25 µg g⁻¹, with relative standard deviation values from 2.89 to 4.76%. Meanwhile, the limits of detection and quantification were in the range of 0.10 to 0.14 µg g⁻¹ and 0.33 to 0.48 µg g⁻¹, respectively. In addition, the Al-ZrO₂-NPs/SPCE method displayed a good reproducibility, high sensitivity, and good selectivity towards the determination of the vanilla phenolic compounds, making it suitable for the determination of vanilla phenolic compounds in vanilla real extracts products.     

Effects of Different Extraction Methods on Vanilla Aroma

To establish the analytic conditions for examining the aroma quality of vanilla pods, we compared different extraction methods and identified a suitable option. We utilized headspace solid-phase microextraction (HS-SPME), steam distillation (SD), simultaneous steam distillation (SDE) and alcoholic extraction combined with gas chromatography (GC) and gas chromatography–mass spectrometry (GC-MS) to identify volatile components of vanilla pods. A total of 84 volatile compounds were identified in this experiment, of which SDE could identify the most volatile compounds, with a total of 51 species, followed by HS-SPME, with a total of 28 species. Ten volatile compounds were identified by extraction with a minimum of 35% alcohol. HS-SPME extraction provided the highest total aroma peak areas, and the peak areas of aldehydes, furans, alcohols, monoterpenes and phenols compounds were several times higher than those of the other extraction methods. The results showed that the two technologies, SDE and HS-SPME, could be used together to facilitate analysis of vanilla pod aroma.     

Extraction of Phenolic Compounds from Fresh Apple Pomace by Different Non-Conventional Techniques

Red Delicious apple pomace was produced at laboratory scale with a domestic blender and different non-conventional extraction techniques were performed to isolate phenolic compounds, such as ultrasound-assisted extraction (UAE), ultraturrax extraction (UTE), accelerated solvent extraction (ASE) and pulsed electric field (PEF) extraction pre-treatment. Total phenolic content (TPC) was determined by Folin–Ciocalteu assay. Phloridzin, the main phenolic compound in apples, was determined by chromatographic analysis Q-TOF-LC/MS. The results obtained with these techniques were compared in order to identify the most efficient method to recover polyphenols. The highest value of TPC (1062.92 ± 59.80 µg GAE/g fresh apple pomace) was obtained when UAE was performed with EtOH:H₂O (50:50, v/v), while ASE with EtOH:H₂O (30:70, v/v) at 40 °C and 50% of flush was the most efficient technique in the recovery of phloridzin. The concentration of the main phenolic compounds ranged from 385.84 to 650.56 µg/g fresh apple pomace. The obtained results confirm that apple pomace represents an interesti-ng by-product, due to the presence of phenolic compounds. In particular, phloridzin could be considered a biomarker to determine the quality of numerous apple products. Therefore, this research could be a good starting point to develop a value-added product such as a functional food or nutraceutical.     

LC-ESI-MS/MS Polyphenolic Profile and In Vitro Study of Cosmetic Potential of Aerva lanata (L.) Juss. Herb Extracts

The aim of the present study was to investigate the phenolic composition and the biological properties of different Aerva lanata (L). Juss. herb extracts obtained with the use of accelerated solvent extraction (ASE), i.e., a green, ecological method, for cosmetic purposes. All samples exhibited high DPPH^• (9.17–119.85 mg TE/g) and ABTS^•+ (9.90–107.58 mg TE/g) scavenging activity. The extracts exhibited considerable anti-lipoxygenase (EC₅₀ between 1.14 mg/mL and 3.73 mg/mL) and anti-xanthine oxidase (EC₅₀ between 1.28 mg/mL and 3.72 mg/mL) activities, moderate chelating activity (EC₅₀ between 1.58 mg/mL and 5.30 mg/mL), and high antioxidant potential in the ORAC assay (0.36–3.84 mM TE/g). Changes in the polyphenol profile of the analysed samples depending on the solvent and temperature used for the extraction were determined with the liquid chromatography/electrospray mass spectrometry (LC-ESI-MS/MS) method. Twenty-one phenolic compounds, including flavonoids and phenolic acids, were detected and quantified. It was shown that tiliroside was one of the main phenolic metabolites in the A. lanata (L.) Juss. herb., which may suggest that this compound may be largely responsible for the observed anti-inflammatory activity of the extracts. In addition, the studied extracts exhibited promising skin-related (anti-tyrosinase, anti-elastase, anti-collagenase, and anti-hyaluronidase) activity. This study showed that Aerva lanata (L.) Juss. contains high amounts of phenolic compounds, including tiliroside, and has good skin-related activities. Therefore, the plant may be interesting as a novel source of bioactive agents for cosmetic industries.     

New possibilities for the valorization of olive oil by-products

In this contribution, the capabilities of pressurized liquid extraction (PLE) using food-grade solvents, such as water and ethanol, to obtain antioxidant extracts rich on polyphenolic compounds from olive leaves are studied. Different extraction conditions were tested, and the PLE obtained extracts were characterized in vitro according to their antioxidant capacity (using the DPPH radical scavenging and the TEAC assays) and total phenols amounts. The most active extracts were obtained with hot pressurized water at 200 °C (EC(50) 18.6 μg/mL) and liquid ethanol at 150 °C (EC(50) 27.4 μg/mL), attaining at these conditions high extraction yields, around 40 and 30%, respectively. The particular phenolic composition of the obtained extracts was characterized by LC-ESI-MS. Using this method, 25 different phenolic compounds could be tentatively identified, including phenolic acids, secoiridoids, hydroxycinnamic acid derivatives, flavonols and flavones. Among them, hydroxytyrosol, oleuropein and luteolin-glucoside were the main phenolic antioxidants and were quantified on the extracts together with other minor constituents, by means of a UPLC-MS/MS method. Results showed that using water as extracting agent, the amount of phenolic compounds increased with the extraction temperature, being hydroxytyrosol the main phenolic component on the water PLE olive leaves extracts, reaching up to 8.542 mg/g dried extract. On the other hand, oleuropein was the main component on the extracts obtained with ethanol (6.156-2.819 mg/g extract). Results described in this work demonstrate the good possibilities of using PLE as a useful technique for the valorization of by-products from the olive oil industry, such as olive leaves.     

A consecutive preparation method based upon accelerated solvent extraction and high‐speed counter‐current chromatography for isolation of aesculin from Cortex fraxinus

A consecutive preparation method based upon accelerated solvent extraction (ASE) coupled with high‐speed counter‐current chromatography (HSCCC) was presented and aesculin was obtained from Cortex fraxinus. The extraction condition of ASE was optimized with response surface methodology; some significant parameters such as the solvent system and its stability, the amount of loading sample in HSCCC were also investigated. The original sample was first extracted with methanol at 105°C and 104 bar for 7 min using ASE, then the extracts were consecutively introduced into the HSCCC system and separated and purified with the same ethyl acetate/n‐butanol/water (7:3:10, v/v/v) solvent system for five times without further exchange and equilibrium. About 3.1 ± 0.2 mg/g in each time and total of 15.4 mg/g aesculin with purity over 95% was isolated from Cortex fraxinus. The results demonstrated that the consecutive preparation method was time and solvent saving and high throughput, it was suitable for isolation of aesculin from Cortex fraxinus, and also has good potential on the separation and purification of effective compounds from natural product.     

Bioactive Properties of Extracts from Plectranthus barbatus (Coleus forskohlii) Roots Received Using Various Extraction Methods

The aim of this study was to verify various extraction methods: shaking water bath extraction (SWA), ultrasound-assisted extraction (UAE) and microwave assisted extraction (MAE), and their parameters to optimize the extraction yield as well as maximize the concentration of polyphenols in Plectranthus barbatus extracts. Extracts were obtained from dried roots of P. barbatus in various degrees of fragmentation and analyzed for content of polyphenols, antioxidant capacity and flavonoids. Additionally, phenolic compounds in extracts were analyzed using the UHPLC–DAD–ESI–MS/MS method. The conducted research showed that roots of P. barbatus are rich in polyphenolic compounds. A total of 15 phenolic compounds, belonging to the group of phenolic acids and their derivatives, were identified. The extraction yield was similar for all extraction methods and averaged 31%. Irrespective of the extraction method, the yield was the lowest in the case of using 80% ethanol as the solvent. The extracts obtained from the finer fraction were characterized by a higher antioxidant capacity as well as a higher concentration of polyphenolic compounds including flavonoids. UAE seems to be the most effective method for extraction of polyphenols from P. barbatus roots. Regardless of the extraction method, ethanol was a better extractant than distilled water. All ethanolic extracts were characterized by a high antioxidant capacity. The 80% ethanol solution was considered the best solvent for the extraction of flavonoids, while the 40% and 60% ethanol solutions were sufficient for the effective extraction of polyphenolic compounds in general.     

Focused microwaves-assisted extraction and simultaneous spectrophotometric determination of vanillin and p-hydroxybenzaldehyde from vanilla fragans

A new method to quick extraction of vanillin and p-hydroxybenzaldheyde (PHB) of vanilla beans from vanilla fragans is proposed. Samples were irradiated with microwaves energy to accelerate the extraction process and photometric monitoring was performed at 348 and 329 nm (vanillin and PHB, respectively). The simultaneous determination of vanillin and PHB from extracts was performed using the Vierordt's method, which showed a precision, expressed as relative standard deviation, smaller 2.5% for both analytes. Conditions such as microwaves irradiation power, number of irradiation and non-irradiation cycles, irradiation time and ethanol concentration were optimized by means of multivariate screening that showed that irradiation power and number of irradiation cycles are the most significant condition in the vanilla extraction process. The focused microwave-assisted extraction (FMAE) was applied to commercial (dried vanilla beans from fresh green vanilla beans), lyophilised and dried (commercial vanilla dried at 135 °C in oven) vanilla beans samples. The results showed that the extraction of vanillin and PHB in the commercial vanilla samples were higher than in dried and lyophilised samples. With the proposed FMAE a decrease in the extraction time of 62 times and an increase in the vanillin and PHB concentrations between 40 and 50% with respect to the official Mexican extraction method, were obtained.     

长江沿岸某化工园区土壤、底泥中酚类化合物的污染现状

建立了同时测定土壤（底泥）样品中12种酚类化合物的检测方法。采用加速溶剂萃取（ASE）与凝胶渗透色谱（GPC）协同净化进行前处理,气相色谱和质谱联用技术（GC-MS）进行定性定量分析。方法检出限为0.410~13.1 μg/kg（干重）,回收率在70.7%~122%之间,相对标准偏差（RSD）为1.2%~16%。基于上述分析方法研究了长江沿岸某化工园区土壤及长江底泥中12种酚类化合物的污染水平。17个土壤样品和7个底泥样品中除对苯二酚外的11种酚类化合物均有检出。土壤和底泥中酚类污染物总含量范围分别为10.16~30.66 mg/kg和18.00~29.83 mg/kg,平均含量分别为18.26 mg/kg和22.51 mg/kg。土壤和底泥中最主要的酚类污染物为4-硝基苯酚和4-氯-3-甲酚,其次为邻氯对苯二酚、4,6-二硝基邻甲基苯酚和2,4,6-三氯酚。该化工园区周边土壤及长江底泥中12种酚类污染物污染水平较低、环境风险较小。     

Exploring the Extraction Methods of Phenolic Compounds in Daylily (Hemerocallis citrina Baroni) and Its Antioxidant Activity

Daylily is a valuable plant resource with various health benefits. Its main bioactive components are phenolic compounds. In this work, four extraction methods, ultrasonic-assisted water extraction (UW), ultrasonic-assisted ethanol extraction (UE), enzymatic-assisted water extraction (EW), and enzymatic-assisted ethanol extraction (EE), were applied to extract phenolic compounds from daylily. Among the four extracts, the UE extract exhibited the highest total phenolic content (130.05 mg/100 g DW) and the best antioxidant activity. For the UE extract, the DPPH value was 7.75 mg Trolox/g DW, the FRAP value was 14.54 mg Trolox/g DW, and the ABTS value was 15.37 mg Trolox/g DW. A total of 26 phenolic compounds were identified from the four extracts, and the UE extract exhibited a higher abundance range of phenolic compounds than the other three extracts. After multivariate statistical analysis, six differential compounds were selected and quantified, and the UE extract exhibited the highest contents of all six differential compounds. The results provided theoretical support for the extraction of phenolic compounds from daylily and the application of daylily as a functional food.     

Obtaining Bioactive Compounds from the Coffee Husk (Coffea arabica L.) Using Different Extraction Methods

Coffee husks (Coffea arabica L.) are characterized by exhibiting secondary metabolites such as phenolic compounds, which can be used as raw material for obtaining bioactive compounds of interest in food. The objective of this study is to evaluate different methods for obtaining the raw material and extracting solutions of bioactive compounds from coffee husks. Water bath and ultrasound-assisted extraction methods were used, using water (100%) or ethanol (100%) or a mixture of both (1:1) as extracting solutions and the form of the raw material was in natura and dehydrated. The extracts were evaluated by their antioxidant potential using DPPH radicals, ABTS, and iron reduction (ferric reducing antioxidant power (FRAP)), and later total phenolic compounds, total flavonoids, and condensed tannins were quantified the phenolic majority compounds were identified. It was verified that the mixture of water and ethanol (1:1) showed better extraction capacity of the compounds with antioxidant activity and that both conventional (water bath) or unconventional (ultrasound) methods showed satisfactory results. Finally, a satisfactory amount of bioactive compounds was observed in evaluating the chemical composition (total phenolic compounds, total flavonoids, condensed tannins, as well as the analysis of the phenolic profile) of these extracts. Corroborating with the results of the antioxidant activities, the best extracting solution was generally the water and ethanol mixture (1:1) using a dehydrated husk and water bath as the best method, presenting higher levels of the bioactive compounds in question, with an emphasis on chlorogenic acid. Thus, it can be concluded that the use of coffee husk as raw material to obtain extracts of bioactive compounds is promising. Last, the conventional method (water bath) and the water and ethanol mixture (1:1) stood out among the methods and extracting solutions used for the dehydrated coffee husk.     

Simultaneous extraction and analysis by high performance liquid chromatography coupled to diode array and mass spectrometric detectors of bixin and phenolic compounds from annatto seeds

This study was designed to identify and quantify the carotenoids and phenolic compounds from annatto seeds using high performance liquid chromatography coupled to diode array and mass spectrometer detectors (HPLC-DAD-MS/MS). Furthermore, using response surface methodology, an optimized procedure for simultaneous extraction of these compounds was established. In addition to bixin, known to be the main carotenoid in annatto seeds, hypolaetin and a caffeoyl acid derivative were identified as the main phenolic compounds. The optimized procedure involved 15 extractions using acetone:methanol:water (50:40:10, v/v/v) as solvent, a solid-liquid ratio of 1:9 (m/v) and an extraction time of 5 min. Validation data indicated that the HPLC method proposed provided good linearity, sensitivity, procedure accuracy, system precision and suggested its suitability for the simultaneous analysis of phenolic compounds and carotenoids in annatto seeds.     

Fast separation and determination of carnosic acid and rosmarinic acid in different rosemary (Rosmarinus officinalis) extracts by capillary zone electrophoresis with ultra violet-diode array detection

Summary Carnosol, carnosic acid, rosmarinic acid and other not identified phenolic compounds were separated by capillary zone electrophoresis (CZE) using a 40-cm long capillary and a 20 mM tetraborate buffer (pH 9.0), within 3 min. A UV-diode array detector was employed to collect spectra of phenolic compounds. The effect of some separation parameters on peak resolution and migration time of phenolic species present in a refined rosemary extract was studied. The repeatability of the method was also investigated: the intraday relative standard deviation on total peak area was less than 4%, while the intraday relative standard deviation on migration time was less than 0.6%. Moreover the CZE method showed good sensitivity (0.0007 μg mL¹ for carnosic acid and rosmarinic acid). Carnosic acid and rosmarinic acid have been quantified in different commercial extracts of rosemary. Finally, the optimized method was also applied to evaluate the recovery of these two compounds when different organic solvents were employed during the extraction procedure.     

Pressurized liquid extraction of lipids for the determination of oxysterols in egg-containing food

Pressurized liquid extraction (PLE, ASE) was compared with the Folch procedure (a solid-liquid extraction with chloroform/methanol 2:1, v/v) for the lipid extraction of egg-containing food; the accuracy of PLE for the quantitative determination of oxysterols in whole egg powder was evaluated. Samples of spray-dried whole egg, an Italian vanilla cake (Pandoro) and egg noodles were used. Two different extraction solvents (chloroform/methanol 2:1, v/v, and hexane/isopropanol 3:2, v/v) were tested at different extraction temperatures and pressures (60 degrees C at 15 MPa, 100 degrees C at 15 MPa, 120 degrees C at 20 MPa). No significant differences in the lipid recovery of the egg powder sample using PLE were found. However, PLE of the vanilla cake and egg noodles with the chloroform/methanol mixture was not selective enough and led to the extraction of a non-lipid fraction, including nitrogen-containing compounds. In the same samples, the pressurized hexane/isopropanol mixture gave a better recovery result, comparable to that obtained using the Folch method. Cholesterol oxidation products of the Folch extract and the pressurized liquid extract of spray dried egg powder (obtained with hexane/isopropanol 3:2, v/v, at 60 degrees C and 15 MPa) were determined by gas chromatography. PLE performed under these conditions is suitable to replace the Folch extraction, because the differences between the two methods tested were not statistically significant. Moreover, PLE shows important advantages, since the analysis time was shortened by a factor of 10, the solvent costs were reduced by 80% and the use of chlorinated solvents was avoided.     

Valorization of Phenolic and Carotenoid Compounds of Sechium edule (Jacq. Swartz) Leaves: Comparison between Conventional,Ultrasound- and Microwave-Assisted Extraction Approaches

Chayote leaves are known for culinary and traditional medicine applications. This work intended to recover carotenoids and phenolic compounds from chayote leaves using the ultrasound-assisted extraction (UAE). A Box–Behnken design was employed to investigate the impact of extraction time, temperature, and ultrasonic power on the recovery of total carotenoids, total phenolic compounds, and antioxidant activities. For comparative purposes, chayote leaf extracts were prepared by maceration (ME) and microwave-assisted extraction (MAE), using the same time and temperature conditions optimized by UAE. Extraction at 50 °C and 170 Watts for 30 min provided the optimal UAE conditions. UAE showed better extraction efficacy than ME and MAE. The HPLC analysis of the extracts showed that the xanthophyll class was the main class of carotenoids, which constituted 42–85% of the total carotenoid content, followed by β-carotene and tocopherol. Moreover, 26 compounds, classified as phenolic acids, flavonols, flavonoids and other polar compounds, were identified in the chayote leaf extracts. Flavonols accounted for 55% of the total compounds quantified (the major compound was myricetin) and phenolic acids represented around 35%, mostly represented by ferulic acid, chlorogenic acid and (+)-catechin. This study revealed the potential of UAE as an effective green extraction technique to recover bioactive compounds from chayote leaves, for food, and for pharmaceutical and cosmetic applications.     

Effects of different extraction methods and conditions on the phenolic composition of mate tea extracts

A simple and rapid HPLC method for determination of chlorogenic acid (5-O-caffeoylquinic acid) in mate tea extracts was developed and validated. The chromatography used isocratic elution with a mobile phase of aqueous 1.5% acetic acid-methanol (85:15, v/v). The flow rate was 0.8 mL/min and detection by UV at 325 nm. The method showed good selectivity, accuracy, repeatability and robustness, with detection limit of 0.26 mg/L and recovery of 97.76%. The developed method was applied for the determination of chlorogenic acid in mate tea extracts obtained by ethanol extraction and liquid carbon dioxide extraction with ethanol as co-solvent. Different ethanol concentrations were used (40, 50 and 60%, v/v) and liquid CO? extraction was performed at different pressures (50 and 100 bar) and constant temperature (27 ± 1 °C). Significant influence of extraction methods, conditions and solvent polarity on chlorogenic acid content, antioxidant activity and total phenolic and flavonoid content of mate tea extracts was established. The most efficient extraction solvent was liquid CO? with aqueous ethanol (40%) as co-solvent using an extraction pressure of 100 bar.     

Optimization of extraction and quantification technique for phenolics content of garlic (Allium sativum): An application for comparative phytochemical evaluation based on cultivar origin

A range of conventional, i.e. maceration, percolation, ultrasonic assisted, Soxhlet and Soxtec extraction (STE), to advanced extraction techniques of accelerated solvent extraction (ASE) was utilized for the first time in order to optimize the extract yield and recovery of phenolics—gallic acid (GA), rutin (RT) and quercetin (QT)—quantified via ultra-high performance liquid chromatography with diode array detector (UHPLC–DAD). The effect of solvents (n-hexane, dichloromethane and methanol) and temperature (60, 80 and 100°C) upon extraction yield, phenolic content and antioxidant activity (DPPH, ABTS and DPPH) was studied, and the method was validated in commercial food samples from Saudi Arabia, China and India. A high extract yield with percentage recovery was observed for STE (1221.10 mg/5 g; 24.42%) and ASE techniques (91.50 mg/1 g; 9.15%) in methanol at 100°C. UHPLC–DAD showed retention times (min) of 0.67, 1.93 and 1.90 for GA, RT and QT, respectively in the shortest runtime of 3 min. The yield for phenolics was higher for STE/ASE (ppm): 15.27/15.29 (GA), 85.24/37.56 (RT) and 52.20/33.40 (QT), respectively. In terms of antioxidant activities, low IC₅₀ values (μg/ml) of 1.09/1.18 (DPPH), 2.11/5.32 (ABTS) and 4.35/7.88 (phenazine methosulfate–nicotinamide adenine dinucleotide) were observed for STE and ASE, respectively. Multivariate analysis for STE showed a significant (P = 0.000) correlation for extraction type vs. extract yield and phenolics content; however, there was no significance for antioxidant activities vs. extraction type. ASE showed a positive correlation for solvent vs. extraction yield, phenolics and antioxidant activity; however, there was no correlation for extraction yield and DPPH activity. Principal component analysis for STE showed a major variability (52.02%) for extraction yield and phenolics in PC1 followed by PC2 (38.30%) for antioxidant activities. For ASE, PC1 (48.68%) showed a positive correlation for solvent vs. extraction yield and phenolics while PC2 (33.12%) showed a positive correlation for temperature and antioxidant activities. STE and ASE were the optimized extraction techniques for the garlic food sample while a significant effect of solvent and temperature was observed upon extraction yield, phenolics and antioxidant activity.     

Determination of 43 polycyclic aromatic hydrocarbons in air particulate matter by use of direct elution and isotope dilution gas chromatography/mass spectrometry

We are reporting a method for measuring 43 polycyclic aromatic hydrocarbons (PAH) and their methylated derivatives (Me-PAHs) in air particulate matter (PM) samples using isotope dilution gas chromatography/high-resolution mass spectrometry (GC/HRMS). In this method, PM samples were spiked with internal standards, loaded into solid phase extraction cartridges, and eluted by dichloromethane. The extracts were concentrated, spiked with a recovery standard, and analyzed by GC/HRMS at 10,000 resolution. Sixteen ¹³C-labeled PAHs and two deuterated Me-PAHs were used as internal standards to account for instrument variability and losses during sample preparation. Recovery of labeled internal standards was in the range of 86–115%. The proposed method is less time-consuming than commonly used extraction methods, such as sonication and accelerated solvent extraction (ASE), and it eliminates the need for a filtration step required after the sonication extraction method. Limits of detection ranged from 41 to 332 pg/sample for the 43 analytes. This method was used to analyze reference materials from the National Institute of Standards and Technology. The results were consistent with those from ASE and sonication extraction, and these results were also in good agreement with the certified or reference concentrations. The proposed method was then used to measure PAHs on PM_2.5 samples collected at three sites (urban, suburban, and rural) in Atlanta, GA. The results showed distinct seasonal and spatial variation and were consistent with an earlier study measuring PM_2.5 samples using an ASE method, further demonstrating the compatibility of this method and the commonly used ASE method.