Pt-Al/MCM-41催化剂的制备及催化合成有机硅增效剂

以介孔硅MCM-41为载体,AlCl₃为促进剂,制备了负载型Pt-Al/MCM-41催化剂。利用傅里叶红外光谱（FTIR）、N₂吸附-脱附、X射线衍射（XRD）、透射电子显微镜（TEM）、X射线光电子能谱（XPS）、电感耦合等离子体发射光谱（ICP）对催化剂的结构、形貌以及金属间作用力进行了表征,着重探讨了不同Al加入量对催化剂结构和金属间作用力的影响,系统考察了Pt-Al/MCM-41用于催化聚乙二醇烯丙基醚和七甲基三硅氧烷合成有机硅增效剂。结果表明,Al的加入量对催化剂的结构和有序度有一定的影响,其比表面积、孔容和有序度随着Al用量的增加而逐步降低。此外,加入一定量的Al有利于提高Pt晶粒的分散度,减小其粒径。Pt₁Al₂/MCM-41催化剂具有良好的重复使用性,使用6次无明显失活,其转化率仍大于90%。合成有机硅增效剂的最佳工艺为：n_PGAE/n_MD^HM=1.1,反应时间为4 h,反应温度为100℃,催化剂用量为0.5%,其转化率达94.1%。     

PtSn/Al2O3/MCM-41催化剂的丙烷脱氢催化性能

用微型催化反应装置评价, 并结合X射线粉末衍射(XRD)、表面积和孔结构测试、程序升温还原(TPR)、氢化学吸附和热重分析等方法研究了负载型PtSn/γ-Al2O3, PtSn/MCM-41和PtSn/Al2O3/MCM-41催化剂的丙烷脱氢反应催化性能. 发现PtSn/Al2O3/MCM-41催化剂具有较PtSn/MCM-41催化剂高的丙烷脱氢反应活性和较PtSn/γ-Al2O3催化剂高的反应稳定性. 实验结果表明, 纯硅MCM-41载体表面的锡物种因与载体相互作用较弱故易被还原, 导致铂金属分散度和催化剂的丙烷脱氢活性较低. 用Al2O3修饰MCM-41可以增强Sn物种与Al2O3/MCM-41载体之间的相互作用, 提高PtSn/Al2O3/MCM-41催化剂铂金属分散度和丙烷脱氢催化活性. 并且, 积炭后的PtSn/Al2O3/MCM-41催化剂具有较高的铂金属表面裸露度, 故具有较高的丙烷脱氢反应稳定性. PtSn/Al2O3/MCM-41催化剂优良的丙烷脱氢催化性能可能不仅与Sn-载体Al2O3/MCM-41较强的相互作用有关, 而且与Al2O3/MCM-41载体的介孔结构有关.     

Pd/NH2C3H6-MCM-41催化水介质中的碘苯Ullmann反应

 采用室温共缩聚法合成了胺基改性MCM-41杂化材料(NH2C3H6-MCM-41), 并以此材料为载体制备了负载型Pd催化剂 (Pd/NH2C3H6-MCM-41). 采用X射线衍射、核磁共振、红外光谱、透射电镜、X射线光电子能谱和N2吸附等方法对催化剂进行了表征. 结果表明,催化剂仍保持有MCM-41的孔结构,但其有序度随着 NH2C3H6-基团和Pd含量的增加而降低. 催化剂在以水为溶剂的碘苯偶联反应(Ullmann反应)中显示出优良的催化性能,联苯收率可达63%, 有望为清洁有机合成提供高效非均相催化剂. 胺基修饰的促进作用可归因于催化剂Pd分散度的提高和表面化学性质的改变.     

PtSn/Al2O3/MCM-41催化剂的丙烷脱氢催化性能

用微型催化反应装置评价,并结合X射线粉末衍射(XRD)、表面积和孔结构测试、程序升温还原(TPR)、氢化学吸附和热重分析等方法研究了负载型PtSn/γ-Al2O3,PtSn/MCM-41和PtSn/Al2O3/MCM-41催化剂的丙烷脱氢反应催化性能.发现PtSn/Al2O3/MCM-41催化剂具有较PtSn/MCM-41催化剂高的丙烷脱氢反应活性和较PtSn/γ-Al2O3催化剂高的反应稳定性.实验结果表明,纯硅MCM-41载体表面的锡物种因与载体相互作用较弱故易被还原,导致铂金属分散度和催化剂的丙烷脱氢活性较低.用Al2O3修饰MCM-41可以增强Sn物种与Al2O3/MCM-41载体之间的相互作用,提高PtSn/Al2O3/MCM-41催化剂铂金属分散度和丙烷脱氢催化活性.并且,积炭后的PtSn/Al2O3/MCM-41催化剂具有较高的铂金属表面裸露度,故具有较高的丙烷脱氢反应稳定性.PtSn/Al2O3/MCM-41催化剂优良的丙烷脱氢催化性能町能不仅与Sn-载体Al2O3/MCM-41较强的相互作用有关,而且与Al2O3/MCM-41载体的介孔结构有关.     

以CTMABr和CTMAOH为共模板剂合成MCM-41

采用共模板剂水热合成了MCM-41.分别用X射线粉末衍射(XRD)、固体核磁共振(²⁷AlMASNMR)和N₂吸附等温线技术考察了用该方法和传统方法所制备的Si-MCM-41和Al-MCM-41样品的晶相结构、孔结构以及Al在分子筛中的化学环境.结果表明,用共模板剂方法合成的MCM-41样品,其纯度和孔径均一性显著提高,特别是当样品中Al含量较高时,仍可保证Al原子以四配位结合在MCM-41的硅骨架上.还就采用共模板剂的理论依据进行了讨论.     

Co掺杂ZnO/MCM-41分子筛的制备及对异戊醇的催化氧化性能

以Co掺杂的介孔分子筛MCM-41为载体, 采用等体积浸渍法制备了系列5%ZnO/xCo-MCM-41催化剂, 并用于催化分子氧氧化异戊醇合成异戊醛的反应. 通过X射线衍射(XRD), 傅里叶变换红外光谱(FTIR), 紫外-可见漫反射光谱(UV-Vis DRS), 扫描电子显微镜(SEM), 氨气程序升温脱附(NH₃-TPD), 氢气程序升温还原(H₂-TPR)和氮气吸附-脱附等手段对样品进行表征, 并考察了Co掺杂量对分子筛结构和催化性能的影响. 结果表明, 随着Co掺杂量的增大, 样品的比表面积和孔体积均减小, 而其平均孔径呈先增大后减小的趋势. 当Co掺杂量为0.05时, 5%ZnO/0.05Co-MCM-41仍保持了MCM-41高度有序的六方介孔结构, 具有高比表面积(989 m²/g)、较大孔径(2.88 nm)和孔体积(0.88 cm³/g), 引入的Co主要以孤立态钴离子[Single-site Co(Ⅱ)]形式存在于MCM-41骨架, MCM-41骨架中的Co可以有效提高ZnO微粒的分散度, 适度降低5%ZnO/MCM-41的表面酸性, 并大幅度提高5%ZnO/MCM-41的氧化还原性. 与5%ZnO/MCM-41相比, 5%ZnO/0.05Co-MCM-41可使异戊醛的选择性提高28.3%.     

钕对苯直接氧化制苯酚催化反应的促进作用

采用溶胶凝胶法制备Cr/Al2O3,Nd-Cr/Al2O3催化剂,通过X射线衍射(XRD)、N2吸附脱附和透射电子显微镜(TEM)对催化剂进行表征,结果表明稀土的加入增加了负载过渡金属的氧化铝的比表面积,使孔道结构更加规则有序。程序升温脱附(TPD)、程序升温还原(TPR)、X射线光电子能谱(XPS)和27Al固体核磁共振(27Al MAS NMR)的表征进一步说明稀土金属和过渡金属对载体表面性质和Al配位的影响,在催化反应中铬是主催化剂,钕是助催化剂。将催化剂用于苯一步氧化制备苯酚的反应中,反应结果表明所得催化剂均具有较高活性,并且Nd-Cr/Al2O3的催化活性高于Cr/Al2O3。     

MCM-41分子筛的表面修饰及其催化合成乙酸异戊酯

通过后合成处理将苄基、三甲基硅烷基和磺酸基接枝到MCM-41分子筛上,制备了一种新型的有机-无机杂化S-B-MCM-41催化剂.采用X射线衍射、低温N2吸附-脱附和酸碱滴定对样品的结构和质子酸量进行了表征和测定.结果表明,S-B-MCM-41催化剂较好地保持了MCM-41分子筛的介孔结构,BET比表面积高达798m2/g,质子酸量为4.0mmol/g.将S-B-MCM-41催化剂用于乙酸与异戊醇合成乙酸异戊酯的反应,考察了各种反应条件对酯化率的影响.在乙酸用量为0.1mol,异戊醇用量为0.15mol,催化剂用量为0.2g,带水剂甲苯为15ml,反应温度为110～125℃,反应时间为2h的优化条件下S-B-MCM-41上的酯化率可达99%以上;而MCM-41分子筛上的酯化率仅为54%.经3次重复使用后,S-B-MCM-41催化剂上的酯化率依然保持在90%以上.初步探讨了S-B-MCM-41催化剂催化合成乙酸异戊酯的反应机理.     

Pt对Ni2P/MCM-41催化剂加氢脱硫性能的影响

以MCM-41为载体, 采用程序升温还原法制备了含有少量Pt的Ni-P/MCM-41催化剂, 并用氢气程序升温还原(H₂-TPR)、 X射线衍射(XRD)、 N₂吸附比表面积、 X射线光电子能谱(XPS)和透射电子显微镜(TEM)对催化剂的结构和性能进行了表征. 考察了P/Ni摩尔比及Pt含量对Ni-P/MCM-41催化剂催化二苯并噻吩(DBT)加氢脱硫(HDS)性能的影响. 结果表明, Pt能降低Ni₂P催化剂的还原温度, 并有助于Ni₂P相的生成, 抑制团聚现象, 提高催化剂的HDS活性. 当Pt的质量分数为0.6%, P/Ni摩尔比为2时, 催化剂具有最佳加氢脱硫活性, 在340 ℃, 3.0 MPa, 氢油体积比为500, 质量空速(WHSV)为2.0 h^-1的条件下, 二苯并噻吩转化率为100%, 且催化剂加氢脱硫活性在120 h内基本保持稳定.     

功能化MCM-41负载双齿氮钯催化剂的制备及其在Suzuki偶联中的应用

首先胺功能化修饰介孔材料MCM-41,再与二-(吡啶-2-基-)甲酮缩合成席夫碱,最后通过Pd(OAc)2配位制备了MCM-41负载双齿氮钯配合物,采用X射线衍射(XRD)以及X射线光电子能谱(XPS)对其结构表征.该负载催化剂在以二甲苯为溶剂,K2CO3为碱以及n-Bu4NF用作添加剂的Suzuki偶联中表现出优越的催化性能.     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

Summary of development of the theory of stability of colloids and thin films

In this review, the research of the author in the field of colloidal systems is summarized. The factors influencing colloidal stability are systematized and analyzed. Examples are presented to illustrate the practical utilization of the theory of stability of colloids and thin films.This review was prepared on the basis of the works of the author, which were awarded the State Premium for 1991 in the field of science and technology, chemistry section.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1708–1717, August, 1992.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Thermodynamics of the formation of oxosulfides of rare-earth elements

The enthalpies of solution of several oxosulfides of rare-earth elements and the high-temperature enthalpies of oxosulfides and oxosulfates of lanthanum and yttrium were measured using solution calorimetry and high-temperature microcalorimetry techniques. Standard enthalpies of formation and some thermodynamic properties of oxosulfides and oxosulfates were calculated. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2 pp. 294–297, February, 1997.     

探究“铁的锈蚀条件”实验创新设计

设计了铁的锈蚀实验,说明了铁钉的处理方法,增加了温度、酸、碱的影响条件,实现了铁跟蒸馏水及空气中氧气快速反应而生锈,使实验在5 min左右就能够得到准确的结果。