便携式激光诱导击穿光谱仪测定土壤中重金属

土壤重金属污染对农作物生长和人体健康都有严重危害,现场快速检测对土壤重金属污染调查、应急监测具有重要意义。采用自主研发的土壤重金属激光诱导击穿光谱现场快速检测仪对矿区周边土壤进行现场检测分析,以835个不同基质土壤的光谱数据建立定标数据库,通过支持向量机建立回归模型对土壤重金属元素含量进行定量反演。现场检测获取的全波段光谱波动在15%以内,Cd、Cr、Cu、Ni、Pb和Zn等6种元素光谱强度相对标准偏差平均值为6.31%。将检测结果与实验室电感耦合等离子体质谱法分析对比,6种元素的皮尔逊相关系数r在0.850 1～0.982 9,检测结果80%以上处于±30%相对误差区间分布。对比结果表明自主研发的土壤重金属激光诱导击穿光谱现场检测仪可以满足现场快速检测需求。     

激光诱导击穿光谱在煤质检测中的应用现状

我国当前主要能源仍是煤炭资源,煤质快速检测有利于其清洁高效利用。激光诱导击穿光谱（Laser-Induced Breakdown Spectroscopy,LIBS）作为一种快速光谱检测技术,具有样品需求量小、制样简便、可多元素同时测量等优点,其在煤质快速检测中的应用潜力已得到广泛认可。本文从激光诱导击穿光谱仪器（实验室台式、在线式和便携式）的研发现状、激光诱导击穿光谱对煤质（金属元素、非金属元素和工业指标）的检测现状、煤质分析性能提升方法,以及激光诱导击穿光谱定量分析模型研究等方面介绍了近几年来LIBS技术在煤质检测中的应用现状及未来展望。     

饲料中重金属检测技术的研究进展

综述了饲料中重金属的检测方法如光谱分析法(包括原子吸收光谱法、原子荧光光谱法、电感耦合等离子体发射光谱法、X-射线荧光光谱法和激光诱导击穿光谱法)、电感耦合等离子体质谱法、电化学分析法和分光光度法的研究进展,对各类检测方法的优缺点进行了对比与分析,并在此基础上对饲料中重金属检测技术的发展趋势进行了展望。     

LIBS技术在土壤重金属污染快速测量中的应用

激光诱导击穿光谱(laser-induced breakdown spectroscopy,LIBS)作为一种很有前景的分析和测量技术在过去的10多年中已经显现出来.本文介绍了激光诱导击穿光谱的工作原理和定量定性分析的理论基础,综述了LIBS技术在土壤重金属As、Cd、Cr、Hg、Pb 和Zn等污染快速测量中的应用和仪器研究进展,分析了LIBS应用在该领域中存在的主要问题,对未来基于LIBS快速检测土壤重金属污染需要解决的定量测量和检测限等关键问题进行了探讨.     

激光诱导击穿光谱技术/多元二次非线性回归分析土壤中的铬元素

利用激光诱导击穿光谱(LIBS)技术对土壤中铬元素的含量进行了定量分析研究.由于土壤成分复杂,光谱谱线存在较严重的重叠干扰,若采用一元回归方法分析常得不到理想结果.为了更充分有效地利用光谱中信息,以土壤中Cr Ⅰ 425.43 nm和Fe Ⅰ 425.07 nm谱线的积分强度为自变量,Cr元素浓度为因变量,建立交叉降维近似多元非线性回归、多元二次非线性回归和平方降维近似多元非线性回归模型.对比分析表明,当添加Cr和Fe元素特征谱线强度交叉项影响时,所建立的多元二次非线性回归模型效果最佳,预测浓度与实际参考浓度之间线性关系达到0.9943,预测4个验证样品的相对误差分别为3.57％,0.76％,7.66％和2.24％.     

激光诱导击穿光谱法对钢中夹杂物类型的表征

激光诱导击穿光谱( LIBS)不仅可以对材料整体成分进行分析,还可进行微区及成分分布分析。本实验采用激光诱导击穿光谱对两牌号钢铁样品进行扫描分析,尝试对34CrNiMo6钢中的MnS夹杂物和重轨钢中的Si-Al-Ca-Mg复合夹杂物进行表征。结果表明,34CrNiMo6钢中元素信号的二维强度分布及元素通道合成后,个别位置Mn及S两元素的信号强度同时异常高,可确定试样中存在较多MnS夹杂物;重轨钢中元素的二维强度分布及元素通道合成后,个别位置Si、Ca、Mg及Al元素的信号同时异常高,可确定试样中存在Si-Al-Ca-Mg复合夹杂物。采用扫描电子显微镜/能谱法( SEM/EDS)对上述样品中夹杂物的对比分析结果表明,两种方法对夹杂物类型的判定结果一致。     

飞秒-纳秒双脉冲激光诱导击穿光谱(LIBS)技术对合金的定量分析

激光诱导击穿光谱(Laser-induced breakdown spectroscopy, LIBS)技术几乎不受聚变环境中的强磁场影响,是一种最有希望实现托卡马克装置中面向等离子体材料(Plasma facing materials, PFMs)原位在线诊断的技术,已被用于多个托卡马克PFMs壁诊断。然而,LIBS技术对PFMs表面元素的探测限、定量分析以及PFMs的服役状态判定依旧面临很大挑战。采用同轴飞秒-纳秒激光协同技术,建立了飞秒-纳秒双脉冲激光诱导击穿光谱(fs-ns-DP-LIBS)技术,通过高峰值功率、低激光能量的飞秒激光诱导等离子体,再用纳秒激光增强常规单脉冲LIBS技术信号发射强度,进而提升常规单脉冲LIBS的探测灵敏度,同时结合6种合金标准样品,采用fs-ns-DP-LIBS技术对样品中的主要元素进行了定量分析,并进一步结合机器学习方法对6种合金进行种类判别。结果显示：在纳秒单脉冲和飞秒单脉冲LIBS检测中,Ni、Fe和Mo在400～800 nm波段没有观察到明显特征峰,仅观察到Cr的特征峰;在飞秒-纳秒脉冲间2μs延时,NiⅠ498.02 nm、FeⅠ517....     

大气压辉光放电结合圆柱约束增强激光诱导击穿光谱应用于土壤中稀土元素的检测

土壤中的稀土污染会影响植物生长并通过食物链在动物和人类体内富集,引发环境问题,危害人类健康,因此有必要对土壤中稀土元素的含量进行检测。激光诱导击穿光谱(Laser-induced breakdown spectroscopy, LIBS)在土壤等固体样品分析方面具有原位、无损、实时及多元素同步分析等优势,但该技术的检测灵敏度无法满足痕量元素定量分析的要求。本研究采用大气压辉光放电(Atmospheric pressure glow discharge, APGD)和圆柱约束(Cylindrical confinement, CC)相结合的方法,提高LIBS的检测灵敏度,并将其应用于土壤中稀土元素(Y、 La、 Eu、 Yb和Lu)的检测。结果表明,APGD和CC将LIBS对Y、 La、 Eu、 Yb和Lu元素的检测灵敏度分别提升了11.6、 9.3、 7.9、 8.2和7.6倍。将所构建系统应用于土壤标准物质和未知土壤样品的分析,测得标准样品及未知土壤样品中Y、 La、 Eu、 Yb和Lu元素的含量与ICP-OES测量值的相对误差分别为1.5%～8.6%和1.8%～7.0%,表明所构建...     

激光诱导荧光辅助激光诱导击穿光谱检测有源发光玻璃中的微量元素

在有源发光玻璃的制备过程中,通常需要掺杂微量元素,用于改善玻璃的发光性能,因此在生产过程中进行快速检测非常重要.本实验针对激光诱导击穿光谱技术(LIBS)分析玻璃中微量元素灵敏度不足的问题,利用激光诱导荧光辅助激光诱导击穿光谱技术(LIBS-LIF)检测了玻璃中3种微量元素Yb,Al和P.使用波长可调谐激光激发等离子体中的Yb+离子、Al原子和P原子,并对这3种粒子在激光诱导荧光中的跃迁过程进行了分析.结果表明,通过激光诱导荧光辅助激光诱导击穿光谱技术,Yb+离子、Al原子和P原子的光谱强度分别增强了23,50和8倍,大幅度提高了LIBS分析的灵敏度.     

激光诱导击穿光谱(LIBS)法微损快速检测党参中Pb

中药材重金属元素快速检测对污染监控及人们健康具有重要意义。激光诱导击穿光谱技术(Laser Induced Breakdown Spectroscopy, LIBS)属于一种快速检测方法,研磨压片等预处理方法相对样品消解已有所简化,但破坏了样品的物理性质,且不能满足中药材大宗品种、大批量检测需求。若进一步简化样品预处理,将更加凸显LIBS快速检测的优势。本文建立了激光诱导击穿光谱技术(LIBS)快速微损检测中药材样品重金属元素定标方法。线性相关系数R2为0.7764,建立的微损定标曲线线性可用于切片党参LIBS快速检测,对待测党参切片样品检测平均相对误差为3.74%,与电感耦合等离子体质谱法(ICP-MS)对比,相关系数R2为0.7957,验证了LIBS技术微损检测的可行性。制备的党参参考定标样品可多次重复用于待测样定标和仪器标定等。实验对待测党参样品仅进行切片处理,避免了研磨、压片等预处理,更加充分地体现LIBS快速检测的优势,为LIBS技术应用于中药材重金属元素快检等领域提供了一种新方法。     

Emissionsspektrographische bestimmung von Stickstoffspuren über die Cyanbandenemission in AIIIBV-Halbleitern

Traces of nitrogen in GaP and GaAs are determined by an emission spectrographic method. The nitrogen, which is bound in the powder samples as nitride, reacts with the carbon of the powder mixture at the temperatures of the a.c. arc to form the CN-radical. The CN-band at 388.4 nm (head of the band) and the Sc I atomic line at 390.7 nm (standard) are used for the analysis. The detection limit (3s-criterion) is 100 ppm nitrogen (500 ng) in 5 mg of A^IIIB^V-semiconductor sample.     

Direct optical emission spectroscopy of liquid analytes using an electrolyte as a cathode discharge source (ELCAD) integrated on a micro-fluidic chip

Atomic emission detection of metallic species in aqueous solutions has been performed using a miniaturised plasma created within a planar, glass micro-fluidic chip. Detection was achieved using an Electrolyte as a Cathode Discharge source (ELCAD) in which the sample solution itself is used as the cathode for the discharge. To realise the ELCAD technique within a micro-fluidic device, a parallel liquid-gas flow was set up in a micro-channel and a glow discharge ignited between the flowing liquid sample surface and a metal wire anode. The detection of copper and sodium was achieved, using atmospheric pressure air as a carrier gas, by observation of atomic emission lines of copper at 324 nm, 327 nm, 511 nm, 515 nm and 522 nm and an atomic emission line of sodium at 589 nm using a commercially available miniaturised spectrometer. A total electrical power of less than 70 mW was required to sustain the discharge. A semi-quantitative, absolute detection limit of 17 nmol s(-1) was obtained for sodium with a sample flow rate of 100 microL min(-1) and an integration time of 100 ms in air at atmospheric pressure. The volume required for such detection is approximately 170 nL. Further analysis was performed with an Echelle spectrometer using both argon and air as a carrier gas. The geometry and flow rates used demonstrate the feasibility of integrating such micro-plasmas into other micro-fluidic devices, such as miniaturised CE devices, as a method of detection. The potential for using such micro-plasmas within highly portable miniaturised systems and mu-TAS devices is presented and discussed.     

离子选择电极阵列土壤中硝态氮测定

土壤硝态氮反映土壤短期氮素供应水平,实时了解土壤硝态氮的含量为精准农业和农业面源污染防控提供支撑,因此,在线实时检测土壤硝态氮方法突破就显得十分迫切。土壤硝态氮中的硝酸根离子在土壤中的高水溶性和流动性为全固态硝酸根离子选择电极高敏感检测土壤中硝态氮提供了条件,固态硝态氮离子选择电极的离子选择膜反应硝酸根离子在被测溶液中的浓度。采用全固态硝酸根离子选择电极,且与温度电极和pH电极融合组成电极阵列对土壤饱和溶液中的硝态根离子进行检测。设计了高输入阻抗运算放大电路对电极信号进行采集,并通过微处理控制蠕动泵完成土壤硝态氮待测溶液连续流动测量及实时传输结果。实验结果表明,电极响应时间≤15 s,斜率-51.63 mV/decade,线性范围10-5-10-2.2 mol/L,最低检测限10-5.23 mol/L。相对标准差在0.78%-4.47%范围内,加标回收率均在90%-110%以内。与国家标准紫外可见分光光度法测试结果相比,相关系数（R2）为0.9952,为土壤硝态氮在现场检测奠定技术基础。     

Optimization and evaluation of atomic emission gas chromatographic detection for nitrogen using the 388 nm molecular emission spectral band

Nitrogen determination by gas chromatography with atomic emission (microwave-induced plasma) detection (GC-AED) has been accomplished using the 174 nm atomic emission line, but with very limited selectivity and sensitivity. Nitrogen can also be detected using the cyanogen (CN) molecular band at 388 nm. A commercial GC-AED system was modified to allow the use of the 388 nm line for nitrogen detection, giving an improvement of 100-fold in sensitivity and selectivity, when compared with the 174 nm mode. Limits of detection of 10 pg/s were common, representing a 10-fold improvement. Compound-independent behavior was found for the system, working with optimum operating conditions, while instrumental problems were clearly reflected by a drastic compound dependent behavior. Response factors showed an important dependency upon the concentration of the element present. This dependency affected the accuracy of the determination of empirical formulae using GC-AED.     

Aminophenyl Benzimidazole as a New Reagent for the Estimation of NO2/Nitrite/Nitrate at Trace Level: Application to Environmental Samples

Abstract

A simple and sensitive spectrophotometric method for the determination of nitrogen dioxide in ambient air and nitrite/nitrate in water and soil samples has been developed. Nitrogen dioxide in air has been fixed as nitrite ion using alkaline sodium arsenite as absorbing medium. The method is based on the reaction of nitrite with aminophenyl benzimidazole in acid medium to form diazonium ion, which is coupled with N‐(1‐naphthyl)ethylenediamine dihydrochloride to form an azo dye with an absorption maximum at 555 nm in aqueous phase. The method obeys Beer's law in the concentration range 0–10 µg of nitrite in 25 ml solution. The molar absorptivity has been found to be 6.3×10⁴ l mol^?1 cm^?1. The dye can be extracted quantitatively into isoamyl alcohol under alkaline condition and the addition of methanolic hydrochloric acid restores the original dye colour. Beer's law is obeyed in the concentration range 0–2 µg of nitrite with a detection limit of 0.009 µg. The effect of interfering species has been studied and the developed method has been applied to determine trace levels of nitrogen dioxide in ambient air and the results have been compared with the standard method. It is also applied to measure the nitrite/nitrate levels of surface and ground water samples collected from lakes, tube wells as well as soil samples.     

离子选择电极阵列测定土壤中硝态氮

土壤硝态氮反映土壤短期氮素供应水平,实时了解土壤硝态氮的含量为精准农业和农业面源污染防控提供支撑,因此,在线实时检测土壤硝态氮方法突破就显得十分迫切。土壤硝态氮中的硝酸根离子在土壤中的高水溶性和流动性为全固态硝酸根离子选择电极高敏感检测土壤中硝态氮提供了条件,固态硝态氮离子选择电极的离子选择膜反应硝酸根离子在被测溶液中的浓度。采用全固态硝酸根离子选择电极ELIT NO₃^-,且与温度电极和pH电极融合组成电极阵列对土壤饱和溶液中的硝酸根离子进行检测。设计了高输入阻抗运算放大电路对电极信号进行采集,并通过微处理控制蠕动泵完成土壤硝态氮待测溶液连续流动测定及实时传输结果。实验结果表明,电极响应时间≤15 s,斜率-51.63 mV/decade,线性范围10^-5~10^-2.2 mol/L,最低检测限10^-5.23 mol/L。相对标准差在0.78%~4.5%,加标回收率均在90.0%~110%。与紫外可见分光光度法测试结果相比,相关系数(R²)为0.9952,为土壤硝态氮在现场检测奠定技术基础。     

Baseline correction method for second-harmonic detection with tunable diode lasers

To measure small absorbances in tunable diode laser infrared spectrometry, second-harmonic detection is often used. The spectrum obtained is often used. The spectrum obtained is the sum of the desired molecular line profile, a contribution of the laser emission profile and various types of noise. It is shown that the undesired contributions can be reduced significantly by subtracting a least-squares fitted low-degree polynomial from the spectrum, followed by applying a digital low-pass filter to the remainder. A theory is developed for estimating the systematic error introduced by this procedure. The method is applied in a calibration experiment for nitrogen dioxide in air at low part-per-billion by volume levels.     

亚稳态能量转移发射光谱法测定痕量铅的研究

本文提出了一种测定痕量铅的亚稳态能量转移发射光谱法。利用Surfatron表面波激发获得活化氮。采用电热蒸发微量进样装置进样,考察了各实验参数对测定铅的影响。在波长283.3nm处,铅的检出限可达0.12ng,实际样品分析结果令人满意。对Surfatron表面波激发-活化氮诱导亚稳态能量转移的机理进行了初步探讨。     

Determination of ultratrace nitrogen in pure argon gas by dielectric barrier discharge-molecular emission spectrometry

A dielectric barrier discharge (DBD) was used as a new atmospheric optical emission detector for the determination of trace nitrogen in pure argon gas in this work. The whole system was composed of an ac ozone generation device for power supply, a six-way valve, a laboratory-built DBD device and a USB2000 charge coupled device (CCD). Trace nitrogen in argon was detected at nitrogen molecular emission line of 337 nm. This method features with several advantages: atmospheric working condition, low power consumption (≤ 12 W), simple and cheap instrumentation, fast response and high sensitivity and accuracy. Under the optimized conditions, the limits of detection can be down to 34 ppb.