Synthesis of poly(2,5-dimethylphenylene sulfide) through oxidative polymerization of sulfur chloride with p-xylene

Poly(2,5-dimethylphenylene sulfide) was prepared by oxidative polymerization of sulfur chloride with p-xylene using 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ) as an oxidizing agent. The reaction proceeded efficiently under atmospheric pressure and at room temperature. The polymer formed had a high melting temperature and linear structure which was confirmed by spectroscopies. The effects of reaction time, solvent, temperature and oxidizing agent on polymerization are also discussed.     

Synthesis and electrical conductivity of poly(arylene vinylene). I. Poly(2,5-dimethoxyphenylene vinylene) and poly(2,5-dimethylphenylene vinylene)

The highly conjugated aromatic polymers, poly(2,5-dimethoxyphenylene vinylene) and poly(2,5-dimethylphenylene vinylene), were obtained from their water soluble, sulfonium salt precursor polymers. Films of these polymers were reacted with either AsF₅ or I₂ vapor. Poly(2,5-dimethoxyphenylene vinylene) showed increases in electrical conductivity of up to 14 to 15 orders of magnitude for these two dopants, while an 8 to 9 order of magnitude increase was observed for poly(2,5-dimethylphenylene vinylene) with the same dopants. The synthesis of the precursor polymers, the properties and elimination reactions of films of the precursors, the doping reactions, and the conductivities of the resulting phenylene vinylene films are discussed.     

Synthesis of regiocontrolled poly(4,6-di-n-butoxy-1,3-phenylene) by oxidative coupling polymerization

Poly(4,6-di-n-butoxy-1,3-phenylene) ( 6 ) was prepared by oxidative coupling polymerization of 1,3-di-n-butoxybenzene ( 1 ) or 2,2′,4,4′-tetra-n-butoxy biphenyl (3). Polymerizations were conducted in nitrobenzene in the presence of FeCl₃ at room temperature and produced polymers with number-average molecular weights up to 42,000. The effects of various factors, such as amount of FeCl₃ and reaction temperature and time were studied. The structure of polymer 6 was characterized by 270 MHz ¹H- and 68.5 MHz ¹³C-NMR spectroscopies and was estimated to consist of almost completely 1,3-linkage. The regiocontrolled polymer was readily soluble in common organic solvents. Thermogravimetric analysis of polymer 6 showed 10% weight loss at 390°C in nitrogen. © 1997 John Wiley & Sons, Inc. J Polym Chem 35 : 2259–2266, 1997     

Electron-transfer polymers. XXX. Preparation of poly(1-vinyl-3,4,6-trimethyl-2,5-benzoquinone)

1-Vinyl-3,4,6-trimethyl-2-methoxy-5-hydroxy-benzene (I) was prepared in good yield by the Wittig reaction from the corresponding chloromethyl compound. It could be polymerized cationically to low molecular weight material. The polymer could be oxidized to poly(1-vinyl-3,4,6-trimethyl-2,5-benzoquinone) (III) and could be reduced to the corresponding hydroquinone. Compound (I) was acetylated at the phenolic hydroxyl group and polymerized. The acetyl group was quantitatively reduced with lithium aluminum hydride, and the resulting polymer could be oxidized quantitatively to (III). Its molecular weight was a little higher than that prepared directly from (I).     

Synthesis of poly(10-undecene-1-ol) by metallocene-catalyzed polymerization

Poly(10-undecene-1-ol)s as precursors for potential polar macromonomers were synthesized by metallocene-catalyzed polymerization. For the use as macromonomers, polymerizable terminal double bonds are an important requirement and thus, the investigation of the end groups in the polymers was the main focus of this study. The influence of the catalyst and polymerization conditions on the chain length of the polymer backbone, the monomer conversion as well as the end group characteristics were analyzed. It was possible to find conditions for preparing poly(10-undecene-1-ol)s with terminal double bonds using the catalyst system Cp₂ZrCl₂/MAO. Two other chosen catalysts produced mainly internal double bonds. The poly(10-undecene-1-ol)s could be prepared as atactic or isotactic-rich materials depending on the catalyst used.     

Synthesis of graft polymers with poly(isoprene) as main chain by living anionic polymerization mechanism

The graft polymers [poly(isoprene)‐graft‐poly(styrene)] (PI‐g‐PS), [poly(isoprene)‐graft‐poly(isoprene)] (PI‐g‐PI), [poly(isoprene)‐graft‐(poly(isoprene)‐block‐poly(styrene))] PI‐g‐(PI‐b‐PS), and [poly(isoprene)‐graft‐(poly(styrene)‐block‐poly(isoprene))] PI‐g‐(PS‐b‐PI) with PI as main chain were synthesized through living anionic polymerization (LAP) mechanism and the efficient coupling reaction. First, the PI was synthesized by LAP mechanism and epoxidized in H₂O₂/HCOOH system for epoxidized PI (EPI). Then, the graft polymers with controlled molecular weight of main chain and side chains, and grafting ratios were obtained by coupling reaction between PI^?Li⁺, PS^?Li⁺, PS‐b‐PI^?Li⁺, or PI‐b‐PS^?Li⁺ macroanions and the epoxide on EPI. The target polymers and all intermediates were well characterized by SEC,¹H NMR, as well as their thermal properties were also evaluated by DSC. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of poly dithioesters and cyclization to 1, 3-dithiolium (dithiafulvenium) salts

Piperidinium dithiobenzoate and piperidinium tetrathioterephthalate react with α-halo carbonyl compounds to give small molecules and polymers which, upon dehydrative cyclization with H₂SO₄, yield materials containing the 1,3-dithiolium ring. Maximum yields are obtained by use of phase-transfer techniques and the solvent system H₂O/CH₂Cl₂. The cyclized polymers are soluble in sulfuric acid, and films can be made from (CF₃)₂ CHOH solutions.     

Dielectric relaxations and electrical conductivities of poly(alkyl methacrylates) under high pressure

Dielectric properties of four methacrylate polymers (methyl, ethyl, n-butyl and n-octyl) were studied in the frequency range 0.0001 cps–300 kcps at temperatures above and below the glass transition temperature and at various pressures up to 2500 atm. At temperatures well above T_g a single relaxation peak (α′ peak) was observed in the case of the higher n-alkyl methacrylates. However, this peak was split into two peaks, α and β, with decrease in temperature or increase in pressure. The molecular motions corresponding to the α and the β relaxation processes are the micro-Brownian motions of amorphous main chains and of flexible side chains, respectively. From the temperature and the pressure dependence of the average dielectric relaxation time of these polymers the single relaxation process (the α′ process) was attributed to the micro-Brownian motion of the main chain coupled with that of the side chain. The effects of temperature and pressure on the d.c. conductivity of these polymers were also studied.     

Synthesis and properties of poly(2,5-ethylene benzimidazole)

Methyl β-(3,4-diaminophenyl)propionate, its hydrochloride, and β-(3,4-diaminophenyl)propionic acid were prepared and their structures were established. The effect of temperature, time, and pressure on the polymerization of these compounds and the molecular weight and structure of the resulting polymers were examined. Thin films of different polymer samples were prepared by compression molding, and their infrared spectra were used to study their structures. Samples of poly(2,5-ethylene benzimidazole) formed under typical polymerization conditions were shown by differential scanning calorimetry and x-ray techniques to be amorphous, and the glass transition temperature ranged between 201 and 240°C. The polymers were shown by thermogravimetric analysis to have good thermal stability, and 29–34% of the original weights remained after heating to 1000°C in nitrogen.     

Synthesis of heteroarm star polymers comprising poly(4-methylphenyl vinyl sulfoxide) segment by living anionic polymerization

<正>A series of 3-arm ABC and AA'B and 4-arm ABCD,AA'BC and AA′A″B heteroarm star polymers comprising one poly(4-methylphenyl vinyl sulfoxide) segment and other segments such as polystyrene,poly(α-methylstyrene), poly(4-methoxystyrene) and poly(4-trimethylsilylstyrene) were synthesized by living anionic polymerization based on diphenylethylene(DPE) chemistry.The DPE-functionalized polymers were synthesized by iterative methodology,and the objective star polymers were prepared by two distinct methodologies based on anionic polymerization using DPE-functionalized polymers.The first methodology involves an addition reaction of living anionic polymer with excess DPE-functionalized polymer and a subsequent living anionic polymerization of 4-methylphenyl vinyl sulfoxide(MePVSO) initiated from the in situ formed polymer anion with two or three polymer segments.The second methodology comprises an addition reaction of DPE-functionalized polymer with excess sec-BuLi and a following anionic polymerization of MePVSO initiated from the in situ formed polymer anion and 3-methyl-1,1-diphenylpentyl anion as well.Both approaches could afford the target heteroarm star polymers with predetermined molecular weight,narrow molecular weight distribution (M_w/M_n1.03) and desired composition,evidenced by SEC,~1H-NMR and SLS analyses.These polymers can be used as model polymers to investigate structure-property relationships in heteroarm star polymers.     

Synthesis, properties, and redox behavior of di(1-azulenyl)(2- and 3-thienyl)methyl cations and dications composed of two di(1-azulenyl)methylium units connected with 2,5-thiophenediyl and 2,5-thienothiophenediyl spacers

The titled stable monocations, di(1-azulenyl)(2- and 3-thienyl)methyl cations 7a,b and 8a,b and dications composed of two di(1-azulenyl)methylium units connected with 2,5-thiophenediyl and 2,5-thieno[3,2-b]thiophenediyl spacers 9a,b and 10a,b were prepared by hydride abstraction of the corresponding methane derivatives. These mono- and dications 7a,b, 8a,b, 9a,b, and 10a,b showed high stability with large pK(R)+ values. The values of monocations 7a,b and 8a,b were 11.2-11.8 +/- 0.1 and 11.4-12.4 +/- 0.1, respectively. Two cation units in dications 9a,b and 10a,b were neutralized via one step at the pH of 11.1-11.7 +/- 0.1, which corresponds to the average of the pK(R)+ values of the dications and half-neutralized monocations. Electrochemical behavior of 7a,b, 8a,b, 9a,b, and 10a,b was examined by cyclic voltammetry (CV). Formation of the thienoquinoid products 18a,b and 19a,b from 9a,b and 10a,b was characterized by UV-vis spectroscopy under electrochemical reduction conditions. Chemical reduction of 9a,b and 10a,b with Zn powder in acetonitrile afforded 18a,b and 19a,b as deep-colored crystals, which exhibited rather high electron-donating ability.     

Synthesis of poly(o‐cresol) by oxidative coupling polymerization of o‐cresol

The oxidative coupling polymerization of o‐cresol was investigated using various 2‐substituted pyridine/CuCl catalysts under an oxygen atmosphere, in which 2‐phenylpyridine/CuCl and 2‐(p‐tolyl)pyridine/CuCl catalysts yielded poly(o‐cresol)s with higher regioselectivity for 1,4‐coupling. These polymerizations produced branched and crosslinked polymers in the later stages of polymerization. These polymers showed good thermal properties, such as 5% weight loss temperatures of up to 406 °C and glass transition temperatures of up to 151 °C. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 878–884     

Cationic polymerization with boron halides. V. Synthesis of poly(isobutylene-b-styrene) and poly(styrene-b-isobutylene)

Block copolymers of isobutylene and styrene, PIB-b-PSt and PSt-b-PIB, have been prepared by a two-step synthesis involving (1) preparation of terminally chlorinated (telechelic) polyisobutylene or polystyrene “prepolymers” by using the H₂O/BCl₃ initiator system and (2) blocking from these telechelic prepolymers a second polymer segment by using an alkyaluminum, e.g., Et₂AlCl coinitiator. The telechelic polyisobutylene and polystyrene contain tertiary and benzylic chlorine termini, respectively. Block copolymer characterization included detailed selective solvent extraction procedures, coupled with GPC determinations, PMR, solubility, and intrinsic viscosity studies. The synthesis of PIB-b-PSt and PSt-b-PIB provides direct chemical evidence for the presence and position of active chlorine termini in BCl₃-coinitiated olefin polymerizations.