The thermal decomposition of aqueous manganese (II) nitrate solution

The thermal decomposition of commercially available aqueous solutions of manganese(II) nitrate was investigated using the conventional thermal analytical techniques of thermogravimetry (TG), differential thermal analysis (DTA), and evolved gas analysis (EGA). Infrared spectra and X-ray diffraction patterns were used to help characterize intermediate species.     

Thermochemistry of coal oxidation

Five types of Polish bituminous coal of different grades were analysed using, simultaneously, thermogravimetric analysis (TGA), differential thermogravimetry (DTG), differential thermal analysis (DTA) and evolving gas analysis (EGA) to investigate the non-isothermal coal oxidation. The TGA, DTG and DTA curves, together with EGA, provided parameters which characterize the tendency of a given coal towards oxidation. The TGA and EGA parameters can also be used to approximate the specific active surface area of coal in reaction with oxygen. Due to the negative effects of coal oxidation, such as self-oxidation, an inhibitor was proposed and tested by analysis of the above specified thermoanalytical curves and EGA.     

Microwave Thermal Analysis - A New Approach to the Study of the Thermal and Dielectric Properties of Materials

This paper describes a new instrument for performing thermal analysis using microwaves both as a form of heating and as a novel means of detecting thermally induced transformations in materials. Results are presented for a selection of processes including decompositions, dehydrations and phase changes. The capability of the instrument to be coupled with ancillary techniques such as EGA is also demonstrated. This revised version was published online in August 2006 with corrections to the Cover Date.     

Selected thermoanalytical methods and their applications from medicine to construction

There are many thermoanalytical techniques but only several of them such as thermogravimetric analysis (TG), high resolution thermogravimetric analysis (Hi-Res™ TG), derivative thermogravimetry (DTG), differential thermal analysis (DTA), calorimetry, differential scanning calorimetry (DSC), modulated differential scanning calorimetry (MDSC), evolved gas analysis (EGA), transient thermal analysis (TTA) and thermal conductivity (k) have selected to be discussed in this paper. Simultaneous thermal analysis (STA) is ideal for investigating issues such as the glass transition of modified glasses, binder burnout, dehydration of ceramic materials or decomposition behaviour of inorganic building materials, also with gas analysis. Selected applications of various thermoanalytical techniques from medicine to construction have also been discussed in this paper.     

Kinetic analysis of complex decomposition reactions using evolved gas analysis

For complex decomposition reactions, traditional methods, such as TG and DSC cannot fully resolve all of the steps in the reaction. Evolved gas analysis (EGA) offers another tool to provide more information about the decomposition mechanism. The decomposition of sodium bicarbonate was studied by TG, DSC and EGA using a simultaneous thermal analysis unit coupled to a FTIR. The decomposition of sodium bicarbonate involves two reaction products H₂O and CO₂, which are not evident from either TG or DSC measurements alone. A comparison of the reaction kinetics from TG, DTG and EGA data were compared.     

The Derivatograph-PC a new type of personal computer-controlled derivatograph

The Derivatograph-PC is an instrument for simultaneous TG, DTG, DTA, TD and EGA investigations, using non-isothermal, isothermal and quasi-isothermal heating techniques. This is the latest type in the series of derivatographs. It is operated by means of an IBM-compatible personal computer.     

From Precursors to Thin Films - Thermoanalytical Techniques in the Thin Film Technology

Processing thin films for advanced applications, for instance in electronics and optoelectronics, involves several steps starting from precursor synthesis and ending up with the devices. Especially when optimizing the first steps of this chain of processes, thermoanalytical techniques play an important role. The review will focus on the main chemical deposition methods (CVD, ALE, spray pyrolysis, sol-gel) giving selected examples of problem-solving by thermal analysis. The techniques discussed are TG, DTA/DSC, EGA and their combinations. High-temperature X-ray diffraction (HTXRD) is also a powerful tool for in situ studies of thin films. The examples are taken from solar cell, superconductor and flat panel electroluminescent display technologies. This revised version was published online in July 2006 with corrections to the Cover Date.     

Design and performance of an evolved gas analysis ion attachment mass spectrometer

We designed a simple evolved gas analysis (EGA) system to act as a sampler between solid samples at atmospheric pressure and the high vacuum inside a mass spectrometer. The newly designed stainless steel system is simple, small and rugged and fulfills all the basic requirements for EGA. The temperature is programmable with 60°C/min as the maximum heating rate and the temperature range is up to 600°C. With this system coupled with lithium ion attachment mass spectrometry (IAMS), it is possible to study the temperature‐programmed decomposition of a number of solid materials by detecting any chemical species on a real‐time basis. For illustrative purposes, EGA‐IAMS experiments of polyethylene polymers have been conducted. Copyright © 2010 John Wiley & Sons, Ltd.     

热裂解气相色谱质谱法分析聚合物中红磷

采用单击热裂解(PY)模式和逸出气体分析(EGA)程序升温两种热裂解模式对红磷样品进行定性分析,利用气相色谱分离技术对红磷进行分离,根据红磷的特征质谱31,62,93,124及特征丰度比,质谱法分析不同材料中的红磷含量。单击热裂解模式下,材质和添加剂有可能对红磷造成干扰,改进后的EGA热裂解模式能排除红磷检测中材质和添加剂的干扰,并采用改进后的EGA裂解程序测定自制阳性样品中红磷的含量。结果表明:通过优化裂解温度和气相色谱条件可以有效改善红磷的分析结果,红磷质量浓度在100~500 mg/kg范围内具有良好线性,加标回收率在90.7%~97.7%,相对标准偏差(RSD)为1.6%~2.3%,定量限为81.27 mg/kg。     

Evolved gas analysis (EGA) of brick clays

Using a system based on non-dispersive infrared (NDIR) detectors, evolved gas analysis (EGA) was able to identify and quantify the principal volatiles produced by heating powdered samples of UK brick clays. From these results, atmospheric emissions likely to result from brick production can be predicted. In addition, EGA results for extruded brick clay test pieces are significantly different from those of powdered samples. Within an extruded brick clay body, evolved gases are contained within a pore system and evolved gas-solid phase reactions also occur. This EGA study provides further evidence on the nature of firing reactions within brick clay bodies. The qualitative and quantitative influence of heating rate — a key process condition in brick manufacture — on gas release is also outlined.Dedicated to Dr. Robert Mackenzie on the occasion of his 75th birthday     

Study on thermal decomposition of polymers by evolved gas analysis using photoionization mass spectrometry (EGA-PIMS)

Photoionization mass spectrometry (PIMS) with vacuum ultraviolet (VUV) light source provides an efficient and fragmentation-free method for the soft ionization of gaseous compounds, in order to facilitate an understanding of thermal decomposition behavior and chemical composition of polymeric materials. The PIMS was applied to the evolved gas analysis (EGA) system equipped with a skimmer interface which is constituted based upon a jet separator principle between a vacuum MS chamber and an atmospheric sample chamber in a furnace. A photoionization source with a deuterium (D₂) lamp was closely installed to the vacuum ionization chamber of a mass spectrometer to improve the ionization efficiency. The thermal decomposition of typical polymers in inert gas atmosphere was investigated by the EGA-PIMS and the resulting PI mass spectrum was characterized satisfactorily by only the parent ions with no contribution as a result of fragmentation during the ionization. The results suggested that the EGA-PIMS was an especially powerful and desirable in situ thermal analysis method for polymeric materials which evolve organic gases simultaneously and concurrently. The combination of EGA equipped with skimmer interface with no change of evolved gaseous species and PIMS with fragmentation-free during the ionization is described briefly, and the effective results are presented by comparing with EGA using conventional electron impact ionization mass spectrometry.     

Thermal Characterization of Materials Using Evolved Gas Analysis

Thermal analysis combined with evolved gas analysis has been used for some time. Thermogravimetry (TG) coupled with Fourier transform infrared (FTIR) spectroscopy(TG/FTIR), Thermogravimetry (TG) coupled with mass spectrometry (TG/MS), and Thermogravimetry (TG) coupled with GC/MS offers structural identification of compounds evolving during thermal processes. These evolved gas analysis (EGA) techniques allow to evaluate the chemical pathway of the degradation reaction by determining the decomposition products. In this paper the TG/FTIR, TG/MS, and Pyrolysis/GC-MS systems will be described and their applications in the study of several materials will be discussed, including the analysis of the degradation mechanisms of organically modified clays, polymers, and coal blends. This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermal decomposition mechanism of synthesized copper octoate

Present study describes the synthesis and characterization of copper octoate. Attenuated total reflectance–Fourier transformation infra red (ATR–FTIR) and energy dispersive X-ray (EDX) spectrometric techniques have been used for the characterization of the synthesized compound. The surface morphology of the compound has been studied using scanning electron microscopy (SEM). Thermal behavior and decomposition mechanism of copper octoate has been explained on the basis of simultaneous thermo-gravimetry–differential thermal analysis–evolved gas analysis (TG–DTA–EGA) and high temperature X-ray diffraction (HTXRD) measurements. Copper octoate is stable up to 250 °C. The decomposition process consists of two overlapping steps. A plausible decomposition mechanism is proposed and details of the studies carried out are being discussed here.     

Optimization of firing parameters for ceramic wares by thermal analysis

Aesthetic and utilitarian properties of traditional ceramic wares as well as engineering properties of modern advanced ceramics are attained by maintaining an optimum temperature-time-atmosphere relationship, called firing schedule, in the kiln. The contribution of modern thermal analysis (TA) techniques such as TG/DTG, TG/EGA, TG/MS, DTA, DSC, TDA, etc. in 1) optimizing production steps by raw material quality control, by studying binder burn out, product densification, 2) in simulating appropriate preheating, firing and cooling schedules as well as 3) in developing shorter firing cycles has been extensively reported in recent literature. The paper will first discuss theoretical curves and energy required for ceramic firing and present from the literature selected examples of applications of thermal analysis in ceramic technology.     

Analysis of waterborne paints by gas chromatography-mass spectrometry with a temperature-programmable pyrolyzer

Gas chromatography-mass spectrometry (GC-MS) with a temperature-programmable pyrolyzer was used for the analysis of waterborne paints. Evolved gas analysis (EGA) profiles of the waterborne paints were obtained by this temperature-programmed pyrolysis directly coupled with MS via a deactivated metal capillary tube. The EGA profile suggested the optimal thermal desorption conditions for solvents and additives and the subsequent optimal pyrolysis temperature for the remaining polymeric material. Polymers were identified from pyrograms with the assistance of a new polymer library. The solvents were identified from the electron ionization mass spectra with the corresponding chemical ionization mass spectra. The additive was identified as zinc pyrithione by comparison with authentic standard. Zinc pyrithione cannot be analyzed by GC-MS as it is. However, the thermal decomposition products of zinc pyrithione could be detected. The information on the decomposition temperature and products was useful for the identification of the original compound.     

Thermal and kinetic study of dehydration and decomposition processes for copper intercalated γ-zirconium and γ-titanium phosphates

Thermal dehydration and decomposition processes of some intercalation compounds were studied by simultaneous TG/DSC and evolved gas analysis (EGA). γ-Zirconium and γ-titanium phosphates were intercalated with 1,10-phenanthroline and subsequently reacted with copper ions to form the complex in situ. Reaction mechanisms for thermal decomposition of all the materials were investigated and proposed according to the mass losses recorded by TG and confirmed by EGA (TG-FTIR). The Ozawa-Flynn-Wall isoconversional method provided dependencies of activation energy on the degree of conversion. A “single point” model-free method was also applied using Kissinger equation and the derived results were compared to those of the former method.     

Hartree-Fock与密度泛函混合处理中的电子自相关和自旋平行相关问题

电子气近似中的电子相关能与量子化学中的Hartree-Fock相关能在定义上不相互等同。作者从假想的、含N个电子的"有限电子气"出发, 通过比较这类体系与无限电子气在物理模型上的差异, 合理地把电子气相关能定量地分解为单电子自相关、电子自旋平行相关以及Hartree-Fock相关三个部分。并阐明了各组分的构成随N的变化规律。在此基础上建立的Hartree-Fock与密函混合处理方案, 无须借助任何经验参数, 仅通过简捷的计算即可实现原子和分子的相关能校正。平均误差为4.2%, 优于CI-SD和MP4等Hartree-Fock处理的结果。     

Mechanism of Thermal Decomposition of d-metals Nitrates Hydrates

A series of six nitrates(V) hydrates of 4d-metals as well as mercury and cadmium thermal decomposition was examined by DTA, TG and EGA techniques. It was found that thermal decomposition of d-metals nitrate(V) hydrates proceeds in three stages: partial dehydration, oxo-nitrates and hydroxide nitrates formation and metal oxides formation. General chemical equations for all decomposition stages were proposed. It was found that dehydration of hydrated salts is accompanied by partial decomposition of nitrate(V) groups. This revised version was published online in August 2006 with corrections to the Cover Date.