2-Amino-4-aryl-1-arylideneaminoimidazoles and Acylation Products: A Multinuclear ( 1H, 13C, 15N) NMR Study

The structure of 2-amino-4-aryl-1-arylideneaminoimidazoles in DMSO-d₆ solution was investigated by means of NMR spectroscopic methods (¹H, ¹³C, ¹⁵N). From these data the (E)-configuration at the excocyclic C=N bond and a strong preference for the conformer with the imidazole H-5 and the N=CH proton being spatially close (s-trans regarding the N–N bond) can be concluded. Reaction of the title compounds with acetic anhydride leads to mono and diacylation at the 2-amino group, whereas treatment with pivalic anhydride exclusively affords the corresponding monoacyl product. The mono- and diacylation products exhibit similar configurational and conformational properties as the parent compounds.     

Through space spin-spin coupling <Superscript>19</Superscript>F-<Superscript>1</Superscript>H as the base for comparative analysis of conformational equilibrium in fluorine-substituted aryl vinyl selenides and sulfides

The analysis of long-range spin-spin coupling ¹⁹F-¹H and the other conformation-dependent parameters of ¹H NMR spectra shows that aryl vinyl selenides like aryl vinyl sulfides exist as mixtures of s-cis and s-trans rotational isomers. The combined data of ¹H and ¹³C NMR spectra reveal the increase in the torsional angle ϑ at the bond X-CH=CH₂ (X = S, Se) in selenides compared to sulfides due to diminished interaction energy of the unshared electron pairs of selenium with the π*-orbitals of the double bond as compared to analogous interaction in sulfides.     

DFT calculations of <Superscript>14</Superscript>N, <Superscript>17</Superscript>O,and <Superscript>2</Superscript>H NQR parameters: Investigation of hydrogen bond interactions in sulfapyridine crystalline structure

DFT calculations of electric field gradient (EFG) tensors at the sites of ¹⁴N, ¹⁷O, and ²H nuclei are carried out to characterize the hydrogen bond (HB) interactions in the sulfapyridine crystal structure. One-molecule (monomer) and hydrogen-bonded hexameric cluster models of sulfapyridine are constructed according to available X-ray coordinates where the proton positions are optimized. Then, EFG tensors are calculated for both monomer and target molecule in the hexameric cluster of sulfapyridine to show the effect of HB interactions on the tensors. The calculated EFG tensors are converted to the experimentally measurable nuclear quadrupole resonance (NQR) parameters: quadrupole coupling constant (C _Q ) and asymmetry parameter (η _Q ). The results reveal different contribution of various nuclei to N-H⋯N and N-H⋯O HB interactions in the cluster where the N2 and O1 have major contributions. The computations are performed with B3LYP and B3PW91 functionals DFT method and 6-311+G* and 6-311++G** standard basis sets using the Gaussian 98 package.     

<Superscript>1</Superscript>H and <Superscript>31</Superscript>P nuclear spin-lattice relaxation in C-phosphorylated oximes

The ¹H spin-lattice relaxation times of the proton-bearing groups and the ³¹P spin-lattice relaxation times in C-phosphorylated oximes R¹C(=NOH)P(=O)R²R³ (R¹ = Ph, R² = R³ = OMe; R¹ = Ph, R² = OMe, R³ = OCH²CH²Br; R¹ = PhCH², R² = R³ = OCHMe²) and dioxime R²P(=O)C(=NOH)(CH₂)₄C(=NOH)P(=O)R² (R = OMe) in DMSO-d₆ were measured. The characteristic reorientation times of the whole molecules were estimated using the measured values of the ¹H relaxation times and the results of semiempirical PM3 quantum chemical calculations of the molecular geometries. The reorientation times were used to identify the contributions of different relaxation mechanisms to the rate of ³¹P spin-lattice relaxation. The anisotropy of the chemical shielding of ³¹P nuclei was evaluated from the difference between the ³¹P relaxation rates measured at 101.27 and 161.92 MHz.     

Extraction of metal ions (Fe<Superscript>3+</Superscript>, Co<Superscript>2+</Superscript>, Ni<Superscript>2+</Superscript>, Cu<Superscript>2+</Superscript> and Zn<Superscript>2+</Superscript>) using immobilized-polysiloxane iminobis(n-2-aminophenylacetamide) ligand system

A new insoluble solid functionalized ligand system bearing chelating ligand group of the general formula P-(CH₂)₃-N[CH₂CONH(C₆H₄)NH₂]₂, where P represents [Si–O] _n polysiloxane network, was prepared by the reaction of the immobilized diethyliminodiacetate polysiloxane ligand system, P-(CH₂)₃N(CH₂CO₂Et)₂ with 1,2-diaminobenzene in toluene. ¹³C CP-MAS NMR, XPS and FTIR results showed that most ethylacetate groups (–COOEt) were converted into the amide groups (–N–C=O). The new functionalized ligand system exhibits high capacity for extraction and removal of the metal ions (Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺ and Zn²⁺) with efficiency of 95–97% after recovery from its primary metal complexes. This functionalized ligand system formed 1:1 metal to ligand complexes.     

Complex amidoboranes M<Superscript>2</Superscript>[M<Superscript>1</Superscript>(NH<Subscript>2</Subscript>BH<Subscript>3</Subscript>)<Subscript>4</Subscript>] (M<Superscript>1</Superscript> = Al,Ga; M<Superscript>2</Superscript> = Li,Na, K,Rb, Cs)

Structural, spectral, and thermodynamic characteristics of complex amidoboranes M²[M¹(NH₂BH₃)₄] (M¹ = Al, Ga; M² = Li, Na, K, Rb, Cs) were calculated by the B3LYP/def2-SVPD quantum-chemical method. The procedure for the synthesis of these compounds by reactions of alkali metal amidoboranes with aluminum and gallium chlorides was suggested and experimentally tested. Reaction products were characterized by the NMR and IR spectroscopy and X-ray phase analysis.     

Solvothermal Syntheses,Crystal Structures,and Properties of New [Mn(<Emphasis Type="BoldItalic">dien</Emphasis>)<Subscript>2</Subscript>]<Superscript>2+</Superscript> Complexes

Summary.  The two new compounds Mn(dien)₂[MoS₄] (1) and Mn(dien)₂[Mo₂O₂S₆] (2) (dien = diethylenetriamine) were prepared under solvothermal conditions. Both compounds were obtained as phase-pure products. The structures consist of new [Mn(dien)₂]²⁺ cations and isolated tetrahedral [MoS₄]²⁻ (1) or [Mo₂O₂S₆]²⁻ (2) anions. Between the anions and the cations, hydrogen bonding is observed. Compound 1 crystallizes in the tetragonal space group I (a = 10.219(2), c = 9.259(2) ?, Z = 2), whereas 2 crystallizes in the monoclinic space group P2₁/c (a = 8.703(2), b = 18.390(4), c = 14.603(3) ?, β = 103.18(3)°, Z = 4). The thermal behaviour of the thiomolybdates was investigated using difference thermoanalysis (DTA) and thermogravimetry (TG). Both compounds decompose under argon with a single endothermic signal in the DTA curve (peak maximum: 252 (1) and 242°C (2)). Received November 5, 2001. Accepted December 27, 2001     

Hydrolysis of isobutylaluminum aryloxides studied by <Superscript>1</Superscript>H NMR and quantum chemical methods

The results of ¹H NMR and quantum chemical studies of hydrolysis of isobutylaluminum aryloxides are presented. According to the data of ¹H NMR spectroscopy, the hydrolysis of monomeric diisobutylaluminum aryloxides (2,6-Bu₂ ^t—C₆H₃O)AlBu₂ ⁱ and (2,6-Bu₂ ^t,4-Me—C₆H₂O)AlBu₂ ⁱ occurs selectively at the Al—OAr bond to form the corresponding sterically bulky phenol and polyisobutylaluminoxane. At the molar ratios Al: H₂O = 2, the formed sterically bulky phenol reacts slowly with diisobutylaluminum monoaryloxide to form isobutylaluminum diaryloxide. Dimeric aryloxide [(2-Bu^t—C₆H₄O)AlBu₂ ⁱ]₂ is not hydrolyzed under similar conditions. The quantum chemical calculations confirmed the experimental results: the hydrolysis at the Al—OAr bond has a lower energy barrier than that at the Al—C bond because of the formation of \({H_{{H_2}O}} \ldots {O_{O - Ar}}\) hydrogen bonds.     

Regio- and stereoselective addition of methane- and bromomethanesulfonyl bromides to 1-phenylthiotricyclo[4.1.0.0<Superscript>2,7</Superscript>]heptane

1-Phenylthiotricyclo[4.1.0.0^2,7]heptane reacted with MeSO₂Br and BrCH₂SO₂Br directly at mixing at 20°C in CH₂Cl₂ along a ionic (electrophilic with respect to bromine) mechanism affording a product of an antistereoselective addition to the central bicyclobutane C¹–C⁷ bond of the norpinane structure. The reaction product contains the exo-oriented sulfonyl group in the geminal position to the SPh substituent. The structure of the adduct with MeSO₂Br in a single crystal was determined by XRD analysis.     

Heat capacity and magnetic phase transition of two-dimensional metal-assembled complex (NEt<Subscript>4</Subscript>)[{Mn<Superscript>III</Superscript>(salen)}<Subscript>2</Subscript>Fe<Superscript>III</Superscript>(CN)<Subscript>6</Subscript>]

Summary Heat capacity measurements of the two-dimensional metal-assembled complex, (NEt₄)[{Mn^III(salen)}₂Fe^III(CN)₆] [Et=ethyl, salen= N,N’-ethylenebis(salicylideneaminato) dianion], were performed in the temperature range between 0.2 and 300 K by adiabatic calorimetry. A ferrimagnetic phase transition was observed at T_c1=7.51 K. Furthermore, another small magnetic phase transition appeared at T_c2=0.78 K. Above T_c1, a heat capacity tail arising from the short-range ordering of the spins characteristic of two-dimensional magnets was found. The magnetic enthalpy and entropy were evaluated to be ΔH=291 J mol^-1 and ΔS=27.4 J K^-1 mol^-1, respectively. The experimental magnetic entropy agrees roughly with ΔS=Rln(5·5·2) (=32.5 J K^-1 mol^-1; R being the gas constant), which is expected for the metal complex with two Mn(III) ions in high-spin state (spin quantum number S=2) and one Fe(III) ion in low-spin state (S=1/2). The heat capacity tail above T_c1 became small by grinding and pressing the crystal. This mechanochemical effect would be attributed to the increase of lattice defects and imperfections in the crystal lattice, leading not only to formation of the crystal with a different magnetic phase transition temperature but also to decrease of the magnetic heat capacity and thus the magnetic enthalpy and entropy.     

Silicate complexation of NpO<Subscript>2</Subscript><Superscript>+</Superscript> ion in perchlorate media

Complexation behavior of NpO₂ ⁺ with ortho-silicic acid (o-SA) has been studied using solvent extraction at ionic strengths varying from 0.10 to 1.00M (NaClO₄) at pcH 3.68±0.08 and 25 °C with bis-(2-ethylhexyl) phosphoric acid (HDEHP) as the extractant. The stability constant value (log β₁) for the 1:1 complex, NpO₂(OSi(OH)₃), was found to decrease with increase in ionic strength of the aqueous phase [6.83±0.01 at I=0.10M to 6.51±0.02 at I = 1.00M]. These values have been fitted in the SIT model expression and compared with similar values of complexation of the metal ions Am³⁺, Eu³⁺, UO₂ ²⁺, PuO₂ ²⁺, Np⁴⁺, Ni²⁺ and Co²⁺. The speciation of NpO₂ ⁺-o-silicate/carbonate system has been calculated as a function of pcH under ground water conditions. On leave from Radiochemistry Division, Bhabha Atomic Research Centre, Trombay, Mumbai-400 085, India.     

<Superscript>1</Superscript>H and <Superscript>13</Superscript>C NMR Study of Bifurcated Intramolecular Hydrogen Bonds in 2,6-Bis(2-pyrrolyl)pyridine and 2,6-Bis(1-vinyl-2-pyrrolyl)pyridine

According to the ¹H and ¹³C NMR data, bifurcated intramolecular hydrogen bond NH?N?HN in 2,6-bis(2-pyrrolyl)pyridine fixes its molecule in a conformation with syn orientation of the pyrrole rings. An analogous bifurcated hydrogen bond CH?N?HC is formed in 2,6-bis(1-vinyl-2-pyrrolyl)pyridine. 2-(1-Vinyl-2-pyrrolyl)-6-(2-pyrrolyl)pyridine is characterized by unsymmetrical bifurcated hydrogen bond NH? N?HC.     

Adducts of zinc and copper(II) dialkyldithiocarbamate complexes with dialkylamines: Synthesis,EPR, and <Superscript>13</Superscript>C and <Superscript>15</Superscript>N CP/MAS NMR

Crystalline adducts of zinc and copper(II) dithiocarbamate (Dtc) complexes with dialkylamines [M(NHR′₂)(S₂CNR₂)₂] (M = Zn, ⁶³Cu, ⁶⁵Cu; R = CH₃, C₂H₅, or R₂ = (CH₂)₄O; R′ = C₂H₅, C₃H₇) have been preparatively isolated. The structures and spectral properties of the adducts have been studied by EPR and ¹³C and ¹⁵N MAS NMR. Chemisorption of bases on powders of dinuclear dithiocarbamates leads to their dissociation into monomeric adducts. Computer simulation demonstrates that the experimental EPR spectra of isotope-substituted copper(II) adducts have an individual character. The geometry of the copper polyhedra is intermediate between a trigonal bipyramid (TBP) and a tetragonal pyramid (TP). The TBP and TP contributions have been quantified based on EPR data. ¹³C and ¹⁵N MAS NMR data show that the Dtc ligands incorporated into the zinc adduct molecule are structurally nonequivalent. The dependence of the isotropic ¹⁵N chemical shifts of the Dtc groups on the alkyl substituents at the nitrogen atom is interpreted based on the concept of joint manifestation of the (+)inductive effect of the alkyl substituents and the mesomeric effect of the Dtc groups.     

Crystal structure of M<Superscript>I</Superscript>VWO<Subscript>6</Subscript> (M = Li,Na) compounds

Compounds of the composition M^IVWO₆ (M = Li, Na) were prepared by solid-phase synthesis at 600°C. The compounds crystallize in the mineral brannerite structure type. The sodium derivative was prepared and identified for the first time. The crystal structures of the compounds were refined by the Rietveld method (space group C2/m).     

Chemo-, regio-, and stereoselectivity in acid-catalyzed hydromethoxylation of tricyclo[4.1.0.0<Superscript>2,7</Superscript>]hept-1-yl and 7-methyltricyclo[4.1.0.0<Superscript>2,7</Superscript>]hept-1-yl phenyl sulfones

Hydromethoxylation of tricyclo[4.1.0.0^2,7]hept-1-yl and 7-methyltricyclo[4.1.0.0^2,7]hept-1-yl phenyl sulfones with methanol at 20°C in the presence of a catalytic amount of perchloric acid is initiated by the endo attack of proton at the C¹ atom, and the subsequent cleavage of the side C¹–C² bond leads to formation of mixtures of diastereoisomeric exo-7-phenylsulfonyl-2-methoxybicyclo[4.1.0]heptanes, the endo-2 isomer prevailing. Probable factors responsible for the observed chemo-, regio-, and stereoselectivity of the addition are discussed.     

Synthesis,characterization and thermal stability of complex <Emphasis Type="Italic">cis</Emphasis>-[Co(bipy)<Subscript>2</Subscript>(CN)<Subscript>2</Subscript>] and its interaction with NO<Subscript>2</Subscript> gas

cis-[Co(bipy)₂(CN)₂] complex was successfully prepared from the reaction of [Co(CN)₂] with 2,2′-bipyridine in ethanol 96%. The product of complex synthesized was light brown crystal with percent yield of 75.86%. The IR spectrum of this complex showed strong characteristics vibration band at 1471.9 and 1442.75 cm⁻¹ for C=N stretching, 1664.57 cm⁻¹ for C=C aromatic, 1600.9 cm⁻¹ 1 for HC=CH aromatic, 653.87 cm⁻¹ for pyridine ring on 2,2′-bipyridine ligand, 3109.25 and 3080.32 cm⁻¹ for C-H of aromatic ring. The thermogram of DTA-TG analysis showed 4 endothermic peaks at temperature of 53.4, 323.2, 444.2, and 526.4°C, where the bond breaking of the complex occurred at different temperatures. The result of moment magnet measurement of the complex showed that it was a high spin complex with moment magnet value of 3.68 BM, so it is a paramagnetic complex.     

Co<Superscript>II</Superscript> and Rh<Superscript>I</Superscript> complexes with <Emphasis Type="Italic">C</Emphasis><Subscript>2</Subscript>-symmetric chiral diamines of the dioxolane series

The reaction of di-μ-chlorobis(1,5-cyclooctadiene)dirhodium with (4S, 5S)-2,2-dimethyl-4,5-bis(methylaminomethyl)-1,3-dioxolane (1) gave the complex [Rh(cod)(1)]Cl (cod is 1,5-cyclooctadiene). The composition of the complexes CoCl₂ · L₂ and [Rh(cod)(L₂)]X (L₂ = 1, (4S,5S)-2,2-dimethyl-4,5-bis(aminomethyl)-1,3-dioxolane, and (4S, 5S)-2,2-dimethyl-4,5-bis(dimethylaminomethyl)-1,3-dioxolane; X = Cl, TfO) was studied using IR and ¹H NMR spectroscopy. In the Rh^I cyclooctadienediamine complexes, the diene molecule forms a stronger bond with the metal atom than that in the cyclooctadienediphosphine analogs. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2270–2274, October, 2005.     

Gas phase structure of micro-hydrated [Mn(ClO<Subscript>4</Subscript>)]<Superscript>+</Superscript> and [Mn<Subscript>2</Subscript>(ClO<Subscript>4</Subscript>)<Subscript>3</Subscript>]<Superscript>+</Superscript> ions probed by infrared spectroscopy

Gas-phase infrared photodissociation spectroscopy is reported for the microsolvated [Mn(ClO₄)(H₂O) _n ]⁺ and [Mn₂(ClO₄)₃(H₂O) _n ]⁺ complexes from n = 2 to 5. Electrosprayed ions are isolated in an ion-trap where they are photodissociated. The 2600–3800 cm⁻¹ spectral region associated with the OH stretching mode is scanned with a relatively low-power infrared table-top laser, which is used in combination with a CO₂ laser to enhance the photofragmentation yield of these strongly bound ions. Hydrogen bonding is evidenced by a relatively broad band red-shifted from the free OH region. Band assignment based on quantum chemical calculations suggest that there is formation of water—perchlorate hydrogen bond within the first coordination shell of high-spin Mn(II). Although the observed spectral features are also compatible with the formation of structures with double-acceptor water in the second shell, these structures are found relatively high in energy compared with structures with all water directly bound to manganese. Using the highly intense IR beam of the free electron laser CLIO in the 800–1700 cm⁻¹, we were also able to characterize the coordination mode (η²) of perchlorate for two clusters. The comparison of experimental and calculated spectra suggests that the perchlorate Cl—O stretches are unexpectedly underestimated at the B3LYP level, while they are correctly described at the MP2 level allowing for spectral assignment.     

Investigation into the formation of heteronuclear clusters of formula [{Ru<Subscript>6</Subscript>C(CO)<Subscript>16</Subscript>Ag<Subscript>2</Subscript>X}<Subscript>2</Subscript>]<Superscript>2−</Superscript> (X = Cl,Br or I)

Reaction of [Ru₆C(CO)₁₆]²⁻ with an excess of AgX (X = Cl, Br or I) affords heteronuclear clusters of formula [{Ru₆C(CO)₁₆Ag₂X}₂]²⁻ in 80% yield, which for X = I and X = Br/Cl were crystallographically characterised. The formation of the cluster was followed in solution using electrospray ionisation mass spectrometry (ESI-MS), which revealed the presence of a wide range of clusters with the general formula [{Ru₆C(CO)₁₆} _x Ag _y X _z ]^{(2x−y+z)−} where x = 1 or 2, y = 1, 2, 3 or 4 and z = 0, 1 or 2. The high yield of the product despite the evident complicated solution speciation is attributed to selective crystallisation of the observed compound driving the equilibrium toward this product.