纳米金/双氢氧化物膜修饰电极制备及对肾上腺素的测定

研究了纳米金/双氢氧化物膜修饰玻碳电极(AuNPs/LDHs/GCE)的制备,通过循环伏安法、扫描电镜和电化学阻抗对修饰电极进行了表征;详细讨论了电极的性能,找出了制备该修饰电极的实验条件,并将此电极用于生物体系中肾上腺素(Adrenaline,AD)的电化学测定.在选定的实验条件下,修饰电极在磷酸盐缓冲溶液(pH=7.0)中进行循环伏安扫描时,氧化峰电流和肾上腺素浓度在9.0×10-8～1.0×10-4mol/L范围内呈良好的线性关系,相关系数为0.9982,其检出限(S/N=3)可达3.1×10-8 mol/L.据此建立了一种新的测定肾上腺素的分析方法,可用于实际样品的检测.     

Preparation and characterization of Ni(II)/polyacrylonitrile and carbon nanotube composite modified electrode and application for carbohydrates electrocatalytic oxidation

A nickel(II) into porous polyacrylonitrile–carbon nanotubes composite modified glassy carbon electrode (Ni/PAN-CNT/GCE) was fabricated by simple drop-casting and immersing technique. The unique electrochemical activity of Ni/PAN-CNT composite modified glassy carbon electrode was illustrated in 0.10?M NaOH using cyclic voltammetry. The Ni/PAN-CNT/GCE exhibits the characteristic of improved reversibility and enhanced current responses of the Ni(III)/Ni(II) couple compared with Ni/PAN/GCE and Ni/CNT/GCE. The results of electrochemical impedance spectroscopy and scanning electron microscopy indicated the successful immobilization for PAN-CNT composite film. Kinetic parameters such as the electron transfer coefficient, α, and rate constant, k _s, of the electrode reaction were determined. Ni/PAN-CNT/GCE also shows good electrocatalytic activity toward the oxidation of carbohydrates (glucose, sucrose, fructose, and sorbitol). The electrocatalytic response showed a wide linear range (10–1,500, 12–3,200, 7–3,500, and 16–4,200?μM for glucose, sucrose, fructose, and sorbitol, respectively) as well as its experimental limit of detection can be achieved 6, 7, 5, and 11?μM for glucose, sucrose, fructose, and sorbitol, respectively. The modified electrode for carbohydrates determination is of the property of simple preparation, good stability, and high sensitivity.     

Synthesis of 5-[(2-hydroxynaphthalen-1-yl)diazenyl]isophthalic acid and its application to electrocatalytic oxidation and determination of adrenaline,paracetamol, and tryptophan

In this study,Au nanoparticles/poly 5-[(2-hydroxynaphthalen-l-yl)diazenyl]isophthalic acid film modified glassy carbon electrode(AuNPs/poly(NDI)/GCE) has shown excellent electrocatalytic activity toward the oxidation of adrenaline(ADR),paracetamol(PAC),and tryptophan(Trp).The bare glassy carbon electrode(GCE) fails to separate the oxidation peak potentials of these molecules,while the poly(NDI) film modified electrode can resolve them.Electrochemical impedance spectroscopy(EIS)indicates that the charge transfer resistance of the bare electrode decreases as 5-[(2-hydroxynaphthalen-l-yl)diazenyl]isophthalic acid is electropolymerized on the bare electrode.Furthermore,EIS exhibits enhancement of electron transfer kinetics between analytes and the electrode after electrodeposition of Au nanoparticles.Differential pulse voltammetry results show that the electrocatalytic current increases linearly in the ranges of 0.01-680.0 μmol L~1 for ADR,0.05-498.0 μmol L~1 for PAC,and 3.0-632.0 μmol L~1 for Trp;with detection limits(S/N = 3) of 0.009 μmol L~1,0.005 μmol L~1,and 0.09 μmol L~1 for ADR,PAC,and Trp,respectively.The proposed method has been successfully applied for simultaneous determination of ADR,PAC,and Trp in biological samples.     

氧化锌纳米簇-金纳米颗粒-壳聚糖复合膜修饰电极用于示差脉冲伏安法测定吗啡

将制备的氧化锌纳米簇和金纳米颗粒分散在壳聚糖中并滴涂在玻碳电极表面,制备了氧化锌纳米簇-金纳米颗粒-壳聚糖复合膜修饰电极(Au-ZnO-CHIT/GCE)。采用循环伏安法研究了吗啡在修饰电极上的电化学行为。结果表明:吗啡在该修饰电极上出现了一个氧化峰,提出了用示差脉冲伏安法测定吗啡的方法。吗啡浓度在5.3×10-6~6.5×10-4mol.L-1范围内与氧化峰电流呈线性关系,检出限(3S/N)为1.8×10-6mol.L-1。修饰电极用于尿液中吗啡的测定,回收率在80.0%~99.6%之间。     

新型乙基溴硫磷印迹膜/纳米金化学修饰电极的研制及应用

以恒电位将金纳米粒子(AuNP)沉积于玻碳电极表面,在模板分子乙基溴硫磷存在下通过循环伏安法将L-半胱氨酸组装到金纳米粒子修饰的玻碳电极上,制备了可选择性识别乙基溴硫磷的L-Cys/ AuNP/ GCE印迹膜电极.结果表明,该电极具有良好的稳定性和重现性,对乙基溴硫磷的线性响应范围为2.5 ～17.5μmol/L,检出...     

A Highly Sensitive Electrochemical Impedance Spectroscopy Immunosensor for Determination of 1‐Pyrenebutyric Acid Based on the Bifunctionality of Nafion/Gold Nanoparticles Composite Electrode

A simple, highly sensitive and label‐free electrochemical impedance spectroscopy (EIS) immunosensor was developed using Nafion and gold nanoparticles (nano‐Au/Nafion) composites for the determination of 1‐pyrenebutyric acid (PBA). Under the optimal conditions, the amount of immobilized antibody was significantly improved on the nano‐Au/Nafion electrode due to the synergistic effect and biocompatibility of Nafion film and gold nanoparticles composites. The results showed that the sensitivity and stability of nano‐Au/Nafion composite electrode for PBA detection were much better than those of nano‐Au modified glassy carbon electrode (nano‐Au/GCE). The plot of increased electron transfer resistances (R_ets) against the logarithm of PBA concentration is linear over the range from 0.1 to 150 ng·mL^?1 with the detection limit of 0.03 ng·mL^?1. The selectivity and accuracy of the proposed EIS immunosensor were evaluated with satisfactory results.     

Micropatterning of biomolecules on a glass substrate in fused silica microchannels by using photolabile linker-based surface activation

Platinum nanoparticles were electrodeposited onto a film of dihexadecyl hydrogen phosphate deposited on a glassy carbon electrode (GCE) and modified with dispersed acetylene black. Scanning electron microscopy and electrochemical impedance spectroscopy revealed that this nanocomposite has a uniform nanostructure and a large surface area that enables fast electron-transfer kinetics. The modified GCE showed high electrocatalytic activity for the oxidation of nitric oxide (NO). Under optimal conditions, the oxidation peak current of nitric oxide is linearly related to the concentration of NO in the concentration range between 0.18 and 120?μM, and the detection limit is as low as 50?nM (at an S/N of 3). The modified electrode was successfully applied to sensing of NO as released from rat liver.

Fabrication of Trimetallic Pt−Pd−Co Porous Nanostructures on Reduced Graphene Oxide by Galvanic Replacement: Application to Electrocatalytic Oxidation of Ethylene Glycol

In present work, reduced graphene oxide nanosheets (rGO) decorated with trimetallic three‐dimensional (3D) Pt−Pd−Co porous nanostructures was fabricated on glassy carbon electrode (Pt−Pd−Co/rGO/GCE). First, GO suspension was drop‐casted on the electrode surface, then GO film reduction was carried out by cycling the potential in negative direction to form the rGO film modified GCE (rGO/GCE). Then, electrodeposition of the cobalt nanoparticles (CoNPs) as sacrificial seeds was performed onto the rGO/GCE by using cyclic voltammetry. Afterward, Pt−Pd−Co 3D porous nanostructures fabrication occurs through galvanic replacement (GR) method based on a spontaneous redox process between PtCl₂, PdCl_2, and CoNPs. The morphology and structure of the Pt−Pd−Co/rGO porous nanostructure film was characterized by scanning electron microscopy, energy dispersive spectroscopy and X‐ray diffraction method. The performance of the prepared electrode was investigated by various electrochemical methods including, cyclic voltammetry and electrochemical impedance spectroscopy. The electrocatalytic activity of the as‐prepared modified electrode with high surface areas was evaluated in anodic oxidation of ethylene glycol. The study on electrocatalytic performances revealed that, in comparison to various metal combinations in modified electrodes, trimetallic Pt−Pd−Co/rGO/GCE exhibit a lower onset potential, significantly higher peak current density, high durability and stability for the anodic oxidation of ethylene glycol. The excellent performances are attributed to the rGO as catalysts support and resulting synergistic effects of the trimetallic and appropriate characteristics of the resulted 3D porous nanostructures. Moreover, the influence of various concentrations of ethylene glycol, the potential scan rate and switching potential on the electrode reaction, in addition, long‐term stability have been studied by chronoamperometric and cyclic voltammetric methods.     

GCE/DNA/PFS/RTIL/HRP修饰电极的制备及其电催化行为

将辣根过氧化物酶（HRP）固定在室温离子液体（RTIL）/聚二茂铁硅烷（PFS）/DNA复合材料修饰的玻碳电极（GCE）表面,构建了GCE/DNA/PFS/RTIL/HRP修饰电极,详细地研究了该修饰电极的电催化行为,优化了电解质溶液的pH值和RTIL的体积对催化过氧化氢（H2O2）的影响。 电化学实验结果表明,DNA、PFS和RTIL复合膜既为HRP提供了一个生物兼容的微环境;又有效地促进了电子在HRP和电极表面之间的传递。 在最优实验条件下,该修饰电极对H2O2具有快速的催化响应,在2 s内即可达到稳态电流的95%,其响应在3.25 μmol/L~1.47 mmol/L（r=0.999,n=10）和1.86~5.35 mmol/L（r=0.996,n=12）范围内呈良好的线性关系,检出限为0.86 μmol/L。 该传感器灵敏度高、重现性和稳定性好。 此外,该修饰电极还能催化O2还原。     

铁氰化铈薄膜固载血红蛋白修饰的过氧化氢生物传感器的制备及性能

采用电化学沉积法将铁氰化铈(CeHCF)薄膜修饰于玻碳电极(GCE)表面,得到铁氰化铈薄膜修饰玻碳电极;将血红蛋白(Hb)固载于该修饰电极表面,成功制得了Hb/CeHCF/GCE过氧化氢生物传感器.考察了铁氰化铈薄膜修饰玻碳电极的氧化还原机理和制备条件,并对血红蛋白在电极上的电子传递过程进行了较为深入的研究.结果表明,铁氰化铈薄膜为血红蛋白提供了温和的固载环境,可实现血红蛋白与电极表面的直接电子转移,提高了血红蛋白的电化学活性;所制得的传感器对过氧化氢具有较高的催化响应和较强的稳定性.相关研究结果在生物医学和临床医学领域具有一定的借鉴意义.     

Amperometric sensor for nitrite using a glassy carbon electrode modified with thionine functionalized MWCNTs/Au nanorods/SDS nanohybrids

A sensitive nitrite (NO₂^‐) biosensor was fabricated by using sodium dodecyl sulfate (SDS), Au nanorods, and thionine functionalized MWCNTs (TH‐f‐MWCNTs) nanohybrids modified glassy carbon electrode. TH was covalently immobilized on the MWCNTs via a carbodiimide reaction. Comparing with MWCNTs/GCE, TH‐f‐MWCNTs/GCE displays higher catalytic activity toward the oxidation of NO₂^‐, since TH not only promoted the electronic transmission but also could improve the concentration of NO₂^‐ at the surface of the modified electrode in acidic solutions. The Au nanorods (AuNRs) were prepared through a simple wet chemical method and were characterized by TEM. The extremely high surface‐to‐volume ratios associated with one dimension nanostructures make their electrical properties extremely sensitive to species adsorbed on surfaces and result in excellent sensitivity and selectivity. SDS displays excellent film forming ability, which made the electrode stable. Under optimal conditions, the linear range for the detection of nitrite was 0.26 to 51 μM, and the low detection limit was 20 nM. In addition, the modified electrode was successfully applied to determine nitrite in real water samples. Copyright © 2012 John Wiley & Sons, Ltd.     

Au Nanowires-MWCNTs修饰电极对葡萄糖的催化氧化

通过油胺(Oleylamine)还原法制备了金纳米线(Au nanowires),将其与酸化处理的多壁碳纳米管(MWCNTs)通过层层组装制备了Au nanowires-MWCNTs复合结构修饰的玻碳电极(Au nanowires-MWCNTs/GCE).电化学研究结果表明,与单纯Au nanowires或MWCNTs修饰电极相比,Au nanowires-MWCNTs/GCE对葡萄糖表现出更优良的电催化性能.以Au nanowires-MWCNTs/GCE为阳极,电沉积Pt膜电极(Pt/GCE)为阴极,构建了葡萄糖/O2燃料电池.测试结果表明,构建的燃料电池的开路电位(OCP)为0.57 V,在0.44 V下最大功率密度(Pmax)为0.28 m W/cm2.     

A Novel Electrochemical Method for the Analysis of Hydrogen Peroxide with the Use of a Glassy Carbon Electrode Modified by a Prussian Blue/Copper‐Gold Bimetallic Nanoparticles Hybrid Film

A novel Prussian blue/copper‐gold bimetallic nanoparticles hybrid film modified electrode was prepared by electrochemical deposition on a glassy carbon electrode (PB/Cu‐AuNPs/GCE). Morphology and electrochemistry of this electrode were studied by UV‐vis spectroscopy, scanning electron microscopy, X‐ray diffraction, cyclic voltammetry and electrochemical impedance spectroscopy. The sensor showed significantly better electrocatalytic activity for the reduction of hydrogen peroxide in comparison with the single PB/GCE and PB/AuNPs/GCE. This was attributed to the synergistic effect of PB and Cu‐Au bimetallic nanoparticles. Also, the sensor demonstrated an overall high level of performance for the analysis of H₂O₂ in the concentration range from 0.002 to 0.84 mM.     

Nanocellulose/Carbon Nanoparticles Nanocomposite Film Modified Electrode for Durable and Sensitive Electrochemical Determination of Metoclopramide

A novel electrochemical sensor based on nanocellulose‐carbon nanoparticles (NC‐CNPs) nanocomposite film modified glassy carbon electrode (GCE) is developed for the analysis of metoclopramide (MCP). Atomic force microscopy, scanning electron microscopy and electrochemical impedance spectroscopy were used to characterize the roughness, surface morphology and performance of the deposited modifier film on GCE. SEM image demonstrated that modifier nanoparticles are uniformly deposited on GCE, with an average size of less than 50 nm. The electrochemical behavior of MCP and its oxidation product is studied using linear sweep and cyclic voltammetry over a wide pH range on NC‐CNPs modified glassy carbon electrode. The results revealed that the oxidation of MCP is an irreversible and pH‐dependent process that proceeds in an adsorption‐controlled mechanism and results in the formation of a main oxidation product, which adsorbs on the surface of NC‐CNPs/ GCE. The modified electrode showed a distinctive anodic response towards MCP with a considerable enhancement (49 fold) compared to the bare GCE. Under the optimized conditions, the modified electrode exhibited a wide linear dynamic range of 0.06–2.00 µM with a detection limit of 6 nM for the voltammetric determination of MCP. The prepared modified electrode showed several advantages such as simple preparation method, high stability, reproducibility, and repetitive usability. The modified electrode is successfully applied for the accurate determination of trace amounts of MCP in pharmaceutical and clinical preparations.     

氯霉素在过氧化聚多巴胺修饰电极上的电化学行为及测定

利用多巴胺(DA)的自聚反应在玻碳电极(GCE)表面形成聚多巴胺(PDA)膜,将聚多巴胺修饰电极浸入碱溶液中进行电化学处理,制得过氧化聚多巴胺修饰电极(OPDA/GCE)。通过方波伏安法直接测定氯霉素在OPDA/GCE上的电化学响应信号,得到待测溶液中氯霉素的浓度。对多巴胺的自聚时间、氯霉素在修饰电极上的电化学性质、测试条件、溶解氧的影响及去除方法等进行考察。结果表明,氯霉素在OPDA/GCE上的还原峰电流与其浓度在3.0×10-6~1.1×10-3mol/L范围内呈良好的线性关系,检出限(S/N=3)为7.8×10-7mol/L,牛奶和蜂蜜样品的加标回收率分别为83.4%~94.1%和91.5%~108.6%。该修饰电极制备方法简便易行、成本低、便于批量制备,用其检测氯霉素操作简单、选择性好。     

Au/GCE电极对水中15种苯酚衍生物的测定

研究了15种不同取代基苯酚衍生物在纳米金/玻碳 (Au/GCE) 电极上的电化学响应. 测试表明：该电极对15种苯酚衍生物的电化学反应各呈现出不同程度的电催化作用;与GCE和平面金电极相比,苯酚衍生物的氧化峰电流均有所增加,氧化电位受待测物反应活性影响较大;水杨酸在Au/GCE电极上响应迅速,电流灵敏度是GCE电极的1.8倍;该电极可用于多种苯酚衍生物的痕量测定.     

胆碱与谷氨酸共价单层混合修饰玻碳电极的制作与表征及其测定亚硝酸根的分析应用

A choline and L-glutamic acid mixed monolayer covalently modified glassy carbon electrode (Ch-Glu/GCE) was fabricated and characterized by X-ray photoelectron spectroscopy (XPS), electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). It provided an excellent example of mixed covalent monolayer modification of carbon electrodes with alkanol and amino acid, and also a facile means for altering the interfacial architecture. The Ch-Glu/GCE displayed good catalytic activity toward the oxidation of nitrite anions. Differential pulse voltammetry was used for determination of nitrite at the Ch-Glu/GCE. The Ch-Glu/GCE showed higher capability for restraint of pollutions than a simple Ch modified electrode or a simple Glu modified electrode.     

壳聚糖-纳米金-葡萄糖氧化酶生物传感器的制备及其应用于葡萄糖的测定

采用了一种简便快捷的电沉积方法制备了壳聚糖-纳米金复合膜并应用于葡萄糖生物传感器的构建.氯金酸和壳聚糖的混合液在玻碳电极表面电化学还原为金纳米粒子,再将葡萄糖氧化酶通过戊二醛交联的方式固定在纳米金复合膜修饰的玻碳电极表面,制成一种新型的葡萄糖氧化酶生物传感器.该传感器对葡萄糖的响应十分快速,在5 S内即达到平衡.测定葡萄糖的线性范围为20μmol·L-1～5 mmol·L-1,检出限(3S/N)为12μmol·L-1.     

Electroreduction of dioxygen on Aunano-DNA film electrode in acidic electrolyte

The colloidal Au nanoparticles-deoxyribonucleic acid (Au(nano)-DNA) film modified glassy carbon electrode (GCE) has been fabricated and the electrochemical reduction of dioxygen (O(2)) at this modified GCE has been studied in 0.2 mol/L air-saturated acetate buffer (pH=5.2) using cyclic voltammetry (CV), chronocoulometry (CC), linear scan voltammetry (LSV) and rotating disk electrode (RDE) as diagnostic techniques. The modified electrode shows excellent enhancement effect towards the reduction of dioxygen to hydrogen peroxide (H(2)O(2)), and the overpotential is lower than that at bare GCE. A well-defined dioxygen reduction peak appeared at about -0.24 V. Based on experimental results, a reaction mechanism is proposed and discussed.     

Electrocatalytic Activity of Immobilized Co(II) on Porous Graphene Aerogels

The highly‐porous graphene aerogel (GA) with BET surface area of 810 m² g^?1 and three‐dimensional structure has been successfully fabricated using the hydrothermal technique. The modified glassy carbon electrode was then prepared by casting the graphene aerogel solution followed by immersing the GA/GCE in Co⁺² solution. The results showed that graphene aerogels improved the adsorption ability of the Co (II) ions. The electrocatalysis of oxygen evolution reaction (OER) at the Co‐GA modified glassy carbon elec‐ trode (Co‐GA/GCE) has been investigated using linear sweep voltammetry (LSV) in alkaline solution. The OER was noticeably enhanced at Co‐GA/GCE, representing a negative shift in the LSV curve at the Co‐GA/GCE compared to that obtained at the bare GCE. The high electrocatalytic activity, good reproducibility and low cost of proposed electrode provides desired characteristics of a potential candi‐ date in the industrial water electrolysis process.