Extraction of metal ions using chemically modified silica gel: a PIXE analysis

Organic ligand with carboxyhydrazide functional group was immobilised on the surface of silica gel and the metal binding capacity of the ligand-embedded silica was investigated. The functional group was covalently bonded to the silica matrix through a spacer of methylene groups by sequential reactions of silica gel with dibromobutane, malonic ester and hydrazine in different media. Surface area value of the modified silica was determined. The changes in surface area were correlated with the structural change of the silica surface due to chemical modifications. A mixture solution of metal ions [K(I),Cr(III),Co(II),Ni(II),Cu(II),Zn(II),Hg(II) and U(VI)] was treated with the ligand-embedded silica in 10(-3) M aqueous solution. The measurement of metal extraction capacity of the silica based ligand was done by multielemental analysis of the metal complexes thus formed by using Proton Induced X-ray Emission (PIXE) technique.     

Complexing properties of polyhexamethyleneguanidine chemically grafted to a silica surface

Covalent bonding of polyhexamethyleneguanidine amides of maleic and o-phthalic acids to the aminated silica surface was performed. The complexing properties of the obtained composite adsorbents with respect to Zn(II), Cu(II), Fe(III), Co(II), Pb(II), Ni(II), Mn(II), Mo(VI), and Cr(VI) ions were studied. The Mo(VI) and Cr(VI) reduction was detected on the modified silica surface bearing polyhexamethyleneguanidine amide with o-phthalic acid. The formation of different-ligand complexes with transition metal cations adsorbed on the synthesized composite surface was studied.     

X-Ray fluorescence determination of trace toxic metals with extraction and preconcentration on silica gel chemically modified with mercapto groups

The sorption properties of silica gel with γ-mercaptopropyl groups chemically immobilized on its surface toward Pb(II), Cd(II), and Zn(II) at MPC levels in natural water in Ukraine were studied. The mutual effect of Pb(II), Cd(II), and Zn(II) in the sorption-X-ray fluorescence determination of their trace amounts with preextraction on silica gel with γ-mercaptopropyl groups was examined     

Preparation and properties of silica gel with immobilized formazan group

A new sorption material, silica gel with covalently immobilized formazan group, was suggested and characterized. The material was prepared by coupling the immobilized aryldiazonium salt with benzaldehyde phenylhydrazone. The equilibrium and kinetic characteristics of the sorption of Cu(II), Co(II), Ni(II), and Cd(II) from solutions onto the modified silica gel were determined. The material proved to efficiently concentrate Cu(II) from multicomponent solutions. The coordination surrounding of Cu(II) in the complex on the sorbent surface was determined by ESR.     

聚乙二醇、聚丙二醇和环氧乙烷-环氧丙烷嵌段共聚物在固-液界面上的吸附 III:硅烷化活性炭/水和甲基化硅胶/水界面

测定了25℃时硅烷化不同时间(1至30天)的活性炭及甲基化硅胶自水溶液中吸附四种聚乙二醇(PEG)、三种聚丙二醇(PPG)和环氧乙烷(EO)-环氧丙烷(PO)嵌段共聚物pluronic-L64的等温线。结果表明, 在各活性炭样品上的等温线均为Langmuir型的; 同一炭样对不同PEG的极限吸附量(g·g^-^1)与分子量无关; 极限吸附时每个PEG分子所占面积(A)与分子中所含EO数(nEO)间有直线关系, 直线的斜率与硅烷化时间有关, 这一结果可用硅烷化时间延长时吸附分子的EO基可能以其氧原子向水, 碳氢链节靠近固体表面取向的模型解释。根据PPG的极限吸附量与分子量有关和极限吸附时的分子面积推断PPG分子不是以平躺方式吸附。甲基化硅胶对PEG的吸附量极小, 对PPG的吸附量随分子量减小急剧降低, 而对L64的吸附量明显大于在亲水硅胶上的。文中对所得结果给出了初步的解释。     

Synthesis, characterization, and sorption properties of silica gel-immobilized Schiff base derivative

Silica gel was derivatized with benzophenone 4-aminobenzoylhydrazone (BAH), a Schiff base derivative, after silanization of silica by 3-chloropropyltrimethoxysilane (CPTS) by using a reported method. Characterization of the surface modification was confirmed through infrared spectroscopy, thermogravimetry, and elemental analysis. The immobilized surface was used for Cu(II), Ni(II), Zn(II), and Co(II) sorption from aqueous solutions. The influence of the amount of sorbent, ion concentration, pH, and temperature was investigated. The sorption data followed Langmuir, Freundlich, and Dubinin-Radushkevich (D-R) isotherms. The mean sorption energy (E) of benzophenone 4-aminobenzoylhydrazone (BAH) immobilization onto silica gel was calculated from D-R isotherms, indicating a chemical sorption mode for four cations. Thermodynamic parameters, i.e., DeltaG, DeltaS, and DeltaH, were also calculated for the system. From these parameters, DeltaH values were found to be endothermic: 27.0, 22.7, 32.6, and 34.6 kJ mol(-1) for Cu(II), Ni(II), Co(II), and Zn(II) metal ions, respectively. DeltaS values were calculated to be positive for the sorption of the same sequence of divalent cations onto sorbent. Negative DeltaG values indicated that the sorption process for these three metal ions onto immobilized silica gel is spontaneous.     

Application of structural analogs of dimercaptosuccinic acid-functionalized silica nanoparticles (DMSA-[silica]) to adsorption of mercury, cadmium, and lead

In order to gain additional insight into mercury selectivity with nano-sized DMSA-[silica], we investigated a series of ligands related to DMSA, these are: monomercaptosuccinic acid; MMSA, 2-mercapto-4-methyl-5-thiazoleacetic acid; MCT, ortho-thiosalicylic acid; o-TSA and para-thiosalicylic acid; p-TSA. The MMSA chelate is structurally similar to DMSA except that it has only one thiol group. The chelates o-TSA and p-TSA each have one thiol and one carboxylic acid group. MCT includes neutral S and N atoms in close proximity to the thiolate binding site. MCT, o-TSA and p-TSA resemble each other in having equal numbers of carboxylic acid and thiol groups and formation of amide bonds with the linker on silica is expected to eliminate the carboxylate binding sites, making thiolates the only binding sites for Hg(II), Cd(II), and Pb(II) metals ions in the nano-sized; MMSA-[silica], MCT-[silica], o-TSA-[silica], and p-TSA-[silica]. Each of the nano-sized MMSA-[silica], MCT-[silica], o-TSA-[silica], and p-TSA-[silica], show a higher preference for Hg(II) over Cd(II) and Pb(II) compared to the same free chelates in solution, respectively. In addition, there are differences in the level of metal ion chelation for each functionalized silica nanoparticle. These differences in the degree of metal chelation for each functionalized silica nanoparticles surface are explained by the difference in thiolate/carboxylate ratio upon attachment to the surface and on steric reasons based on the orientation of the thiol groups on the surface. When attached via amide bond formation, the thiolate site in o-TSA-[silica] will face towards the silica surface, while for p-TSA-[silica], the thiolate site is expected to be pointed outwards and away from the silica surface. In comparing MMSA-[silica] to DMSA-[silica], the thiolate/carboxylate ratio decreases from 2/1 in DMSA-[silica] to 1/1 in MMSA-[silica] (assuming attachment via one amide bond in each case). This effect of increasing the ratio of thiolate to carboxylate upon attachment to the surface is believed to play a role in the selectivity enhancement towards Hg(II) over Cd(II) and Pb(II).     

Silica gel-immobilized-dithioacetal derivatives as potential solid phase extractors for mercury(II)

Dithioacetal derivatives with different para-substituents, XH, CH(3), OCH(3), Cl and NO(2) were synthesized and chemically immobilized on the surface of silica gel for the formation of five newly synthesized silica gel phases (I-V). Characterization of the silica gel surface modification by the organic compounds was accomplished by both the surface coverage determination as well as the infrared spectroscopic analysis. The metal sorption properties of the silica gel phases were studied to evaluate their performance toward metal-uptake, extraction and selective extraction processes of different metal ions from aqueous solutions based on examination of the various controlling factors. The studied and evaluated factors are the pH effect of metal ion solution on the metal capacity values (mmol g(-1)), equilibration shaking time on the percent extraction as well as the structure and substituent (X) effects on the determined mmol g(-1) values. The results of these studies revealed a general rule of excellent affinity of these silica gel phases-immobilized-dithioacetal derivatives for selective extraction of mercury(II) in presence of other interfering metal ions giving rise to a range of 94-100% extraction of the spiked mercury(II) in the metal ions mixture. The potential application of the newly synthesized silica gel phases (I-V) for selective extraction of mercury(II) from two different natural water samples, namely sea and drinking tap water, spiked with 1.0 and 10.0 ng ml(-1) mercury(II) were also studied by column technique followed by cold vapour atomic absorption analysis of the unretained mercury(II). The results indicated a good percent extraction and removal (90-100+/-3%) of the spiked mercury(II) by all the five silica gel phases. In addition, insignificant contribution by the matrix effect on the processes of selective solid phase extraction of mercury(II) from natural water samples was also evident.     

Reactivity of Thioglycolic Acid Physically and Chemically Bound to Silica Gel as New Selective Solid Phase Extractors for Removal of Heavy Metal Ions From Natural Water Samples

A method is presented for the immobilization of thioglycolic acid moiety on the surface of active silica gel via a simple and direct synthetic route and based on one step reaction procedure. Two-product solid phase extractors were successfully synthesized according to physical adsorption and chemical immobilization binding techniques, phases (I) and (II), respectively. The mode of interaction between the silanol group and the thioglycolic moiety was also discussed for both phases based on the infrared analysis studies. The thermal stability properties as well as the effect of buffer solutions on the percentage hydrolysis of the two silica gel phases were examined and revealed the high stability and superiority of silica phase (II) in these respects. The evaluation of the selectivity and metal uptake properties incorporated in these two silica gel phases were also studied and discussed for a series of divalent heavy metal ions under different controlling factors. The mmol/g values were found to be higher in case of phase (I). The selective removal and extraction of some heavy metal ions, viz . Cu(II), Zn(II), and Hg(II) from natural seawater samples was successfully accomplished with the percentage recovery values for the three tested metal ions in the range of 96.5-98.4 - 0.2-0.6%. The presence of higher concentrations of Na(I), K(I), Mg(II) and Ca(II) showed insignificant role or no matrix effect on such selective extraction process due to their 0% values of removal by these silica gel phases (I) and (II).     

Determination of Metal Ions in Natural Waters by Flame-AAS after Preconcentration on a 5-Amino-1,3,4-Thiadiazole-2-Thiol Modified Silica Gel.

ABSTRACT

5-amino-1,3,4-thiadiazole-2-thiol groups attached on a silica gel surface have been used for adsorption of Cd(II), Co(II), Cu(II), Fe(III), Ni(II), Pb(II) and Zn(II) from aqueous solutions. The adsorption capacities for each metal ion were (in mmol.g^?1): Cd(II)= 0.35, Co(II)= 0.10, Cu(II)= 0.15, Fe(III)= 0.20, Hg(II)= 0.46, Ni(II)= 0.16, Pb(II)= 0.13 and Zn(II)= 0.15. The modified silica gel was applied in the preconcentration and quantification of trace level metal ions present in water samples (river, and bog water).     

Modification of silica nanoparticles with 1-hydroxy-2-acetonaphthone as a novel composite for the efficient removal of Ni(II), Cu(II), Zn(II), and Hg(II) ions from aqueous media

In this paper, a novel composite based on the formation of Schiff base on silica nanoparticles was facilely synthesized. Firstly, silica nanoparticles, which contain silanol groups (Si-OH), were modified with (3-aminopropyl)trimethoxysilane. Then, the modified silica reacted with 1-hydroxy-2-acetonaphthone to form a novel Schiff base/silica composite. The synthesized composite was characterized using several tools such as XRD, FT-IR, FE-SEM, N₂ adsorption/desorption analyzer, and CHN analyzer. The considerable reduction at 2θ = 21.9° in the intensity of the XRD peak of the composite is owing to the formation of the Schiff base. Also, the observed FT-IR bands in the composite at 3440 and 1604 cm^?1 are owing to the stretching and bending vibrations of OH and/or CN, respectively. The FE-SEM images confirmed that the silica includes irregular shapes whereas the composite possesses a flaky surface owing to the formation of the Schiff base. Elemental analysis of the composite demonstrated that the % C, % H, and % N are 15.26, 3.24, and 1.65 %, respectively. The BET surface area and total pore volume of the composite were reduced because the formed Schiff base blocks the pores of silica. The synthesized composite was employed for the efficient removal of Ni(II), Cu(II), Zn(II), and Hg(II) ions from aqueous media. The maximum uptake capacity of the composite toward Cu(II), Hg(II), Zn(II), and Ni(II) ions is 68.630, 50.942, 45.126, and 40.420 mg/g, respectively. The adsorption processes of the studied metal ions were spontaneous, chemical, and well described using the pseudo-second-order kinetic model and Langmuir equilibrium isotherm. The synthesized composite can be successfully regenerated and utilized various times in the removal of studied metal ions from aqueous media.     

Synthesis, characterization, and sorption properties of silica gel-immobilized pyrimidine derivative

5-Benzylidene-2-thiobarbituric acid (BzTBA), a pyrimidine derivative, was used to modify the surface of silica gel-chloropropyltrimethoxysilane (Si-Cl) via chemical immobilization to produce a new pyrimidine silica phase (Si-BzTBA). Identification of the surface modification was characterized and performed on the basis of infrared as well as elemental analysis. Thermal desorption method was found to give 0.129-0.143 mmol g(-1) as surface coverage values. Metal sorption properties of Si-BzTBA were also studied and the evaluated results refer to the high metal sorption of Si-BzTBA for copper(II), mercury(II), cadmium(II), and lead(II) with the same order. These four Si-BzTBA-metal complexes were also synthesized and the stoichiometric ratios were identified as 1:1 except lead complex was found to give a 1:2 ratio. Electron impact-mass spectrometric analysis (EI-MS) with 70 eV ionization energy was used as a potential thermal method for the confirmation of surface modification of Si-BzTBA and its metal complexes based on fragmentation elucidation of thermally desorbed ion peaks. The EI-MS of Si-BzTBA was found to show several characteristic fragment ion peaks that are directly related to the chemical binding of BzTBA to SiCl phase. Differential scanning calorimetry study (DSC) was also performed to evaluate the various kinetic and thermodynamic parameters of thermal degradation processes and have been enumerated. The results of EI-MS and DSC are very similar in many respects.     

Silica gel ethyleneimine and its adsorption capacity for divalent Pb, Cd, and Hg

Activated silica gel was directly modified with a cyclic molecule, ethyleneimine, yielding a surface with various nitrogen basic centers, ≡Sil–O(CH₂CH₂NH)_nCH₂CH₂NH₂. Infrared spectroscopy, ¹³C NMR, thermal, and elemental analyses confirmed the covalent attachment of the organic species onto the silica matrix. The purpose of this paper is to describe the interaction involving the grafted species on silica surface with the divalent heavy cations, Pb(II), Cd(II), and Hg(II), from aqueous solutions at room temperature. The process of metal extraction was followed by the batch method and the order of the maximum extraction capacities found was: 1.27 ± 0.04, 1.02 ± 0.02, and 0.98 ± 0.01 mmol g⁻¹ for Pb(II), Cd(II), and Hg(II) chlorides, respectively. These interactions were followed by calorimetric titration. The enthalpies of these processes are: −3.05 ± 0.02, −1.09 ± 0.01, and −9.88 ± 0.03 kJ mol⁻¹ for Pb(II), Cd(II), and Hg(II), respectively. The standard molar Gibbs free energies are in agreement with the spontaneity of the proposed reactions between cation and basic center.     

Determination of Ag(I), Hg(II) and Pb(II) by using silica gel loaded with dithizone and zinc dithizonate

The modified sorbents with dithizone and zinc dithizonate adsorbed on the silica surface were obtained. The adsorption of heavy metal ions from aqueous solutions onto loaded silicas was studied. Color scales for Ag(I), Hg(II) and Pb(II) visual test detection were worked out. The modified silica gels were established to be applicable to semi-quantitative determination of these metal ions in buttermilk, natural, mineral and waste water.     

Nanoporous functional organosilicas for sorption of toxic ions

The chemical immobilization of β-cyclodextrin and its bromoacetyl and thiosemicarbazidoacetyl functional derivatives on the surface of highly disperse amorphous nanoporous silica was performed. β-Cyclodextrin-containing silicas were found to have high affinity to mercury(II), cadmium(II), and zinc(II) cations. Supramolecular surface structures formed whose chemical composition depends on the nature of the sorbed cations and the functional substituents in the attached β-cyclodextrin molecules.     

Formation of Copper(I) mixed-ligand complexes with mercaptopropyl or dipropyl disulfide groups covalently bonded to the silica surface and Michler’s thioketone

Silica chemically modified with mercaptopropyl groups (MPS) is usable in copper(II) recovery from chloride and nitrate solutions, affording a recovery factor of 99%. With silica modified with dipropyl disulfide groups (DPDSS), the largest copper(II) recovery factor is 50% and is attained at pH 6–7. Copper in its mercaptopropyl and dipropyl disulfide complexes on the silica surface is in the oxidation states +1 and +2, respectively. Coordinatively unsaturated copper(I) complexes form on the MPS surface, and their amount depends on the quantity of functional groups grafted to the silica surface. These surface complexes of copper(I) can coordinate with Michler’s thioketone molecules from aqueous ethanol to yield intensely red mixed-ligand copper(I) complexes on the MPS or DPDSS surface (in the latter case, after copper(II) reduction to copper(I) with ascorbic acid). The diffuse reflectance spectrum of the mixed-ligand complexes shows a band at 520 nm.     

An infrared study of adsorbed metal ions on modified silica: Comparative chelation between mercury, cadmium, and lead divalent ions to silica functionalized with ortho- and para-aminothiophenoles

Chelating selectivity and capacity of silica functionalized 2- and 4-aminothiophenoles (2-ASP-[silica] and 4-ASP-[silica]) toward mercury, lead, and cadmium ions in aqueous medium are studied. In this comparative study, the three metal ions were allowed to interact individually and simultaneously with two aminothiophenol (ASP) derivatives namely, 2- and 4-ASP once as free chelates in solution and secondly as immobilized chelates on silica. Upon individually or simultaneously interacting the three metal ions with 4-ASP-[silica], Hg(II) ions are preferentially adsorbed where 100% of Hg(II) is removed compared to 83.0% of Pb(II) and 76% of Cd(II) ions. In solution, Hg(II) ions are found to be preferentially adsorbed by 2-ASP when compared to 4-ASP. Whereas, anchoring 4-ASP to a silica surface via amide linkage provides a significant enhancement in selectivity and extent of chelation toward Hg(II) over Cd(II) and Pb(II) ions. In the case of 4-ASP-[silica], the existence of a free SH group allows an easy-accessible and strain-free binding site for the incoming Hg(II) ions. Whereas, in 2-ASP-[silica], the SH group is sterically hindered due to proximity to the point of attachment with the surface. As a result, 2-ASP-[silica] showed less potential for Hg(II) binding compared to the modified analogue, 4-ASP-[silica] with less chelation extent observed in solution compared to that observed at the surface.     

Sorption–Spectrophotometric and Test Determination of Zinc(II) as the Mixed-Ligand Complex of 1,10-Phenanthroline and Bromophenol Blue

The interaction of Zn(II), Cd(II), and Pb(II) with 1,10-phenanthroline noncovalently immobilized on silica in the presence of Bromophenol Blue was studied. The optimum conditions of the reaction and the composition of mixed-ligand complexes that are formed at the surface were found, and a scheme was proposed for the interaction at the interface. A sorption–spectrophotometric procedure and a test scale were developed for the determination of zinc with detection limits of 0.011 and 0.018 mg/L, respectively. The procedure was used for the determination of labile zinc species in soil.     

Physicochemical and Sorption Properties of Silica Gel with Immobilized Xylenol Orange Surface Groups

Organomineral sorbents were prepared by sorption immobilization of Xylenol Orange on the surface of two different samples of silica gel from aqueous solutions with pH 1.68 under static conditions. The diffusion coefficients of Xylenol Organe in the near-surface layer of silica gel and the equilibrium sorption constants were determined. Wash-out of the dye from the sorbent was studied. Sorption of Cu(II), Zn(II), and Pb(II) on the sorbents from aqueous solutions with pH 5.8 was studied.__________Translated from Zhurnal Prikladnoi Khimii, Vol. 78, No. 1, 2005, pp. 73–78.Original Russian Text Copyright © 2005 by Korneev, Kholin.     

Some aspects of estimation of extraction selectivity under the conditions of competitive sorption on modified silica gels

Systematic studies of silica gels with covalently immobilized thiosemicarbazide and formazan groups under the conditions of competitive sorption from multicomponent systems were conducted. A methodological approach to determine the selectivity of the modified sorption material with regard to Cu(II), Ni(II), Co(II), Cd(II), and Zn(II) was proposed. Solid-phase extraction in equilibrium conditions of Cu(II), Zn(II), Co(II), Cd(II), and Ni(II) on a silica gel with covalently immobilized thiosemicarbazide and formazan groups in the conditions of competitive sorption was studied. The possibility to use the pseudo-second-order kinetic equation for assessment of mutual influence at competitive sorption has been shown. We found that sorption from multicomponent solutions proceeds as a non-additive process under the conditions of an excess of functional groups.

Open image in new window