Thermal stability and crystallization kinetics of Pb and Bi borate-based glasses

Glasses with compositions 60B₂O₃–40PbO, 60B₂O₃–40Bi₂O₃, and 60B₂O₃–30Bi₂O₃–10PbO have been prepared and studied by differential thermal analysis. The crystallization kinetics of the glasses was investigated under non-isothermal conditions. From dependence of the glass transition temperature (T _g) on the heating rate, the activation energy for the glass transition was derived. Similarly the activation energy of the crystallization process was determined. Thermal stability of these glasses were achieved in terms of the characteristic temperatures, such as the glass transition temperature, T _g, the onset temperature of crystallization, T _in , the temperature corresponding to the maximum crystallization rate, T _p, beside the kinetic parameters, K(T _g) and K(T _p). The results revealed that the 60B₂O₃–40PbO is more stable than the others. The crystallization mechanism is characterized for glasses. The phases at which the glass crystallizes after the thermal process have been identified by X-ray diffraction.     

Thermal stability and crystallization kinetics in superionic glasses using electrical conductivity–temperature cycles

The present work demonstrates application of electrical conductivity (σ)–temperature (T) cycles to investigate thermal properties viz., crystallization and glass transition kinetics in AgI–Ag₂O–V₂O₅–MoO₃ superionic glasses. The σ–T cycles are carefully performed at various heating rates, viz., 0.5, 1, 3, 5, and 7 K/min. The conductivity in Ag⁺ ion conducting glasses exhibit anomalous deviation from Arrhenius behavior near glass transition temperature (T _g) followed by a drastic fall at crystallization (T _c). The temperature corresponding to maximum rate of crystallization (T _p) is obtained from the derivative of σ–1/T plots. With increasing heating rates, the characteristic temperatures (T _g, T _p) are found to be shifting monotonically toward higher temperatures. Thus, activation energy of structural relaxation E _s, crystallization E _c and other thermal stability parameters have been obtained from σ–T cycles using Kissinger equation and Moynihan formulation. For a comparative study, these kinetics parameters have also been calculated from differential scanning calorimetry plots. The parameters obtained from both the methods are found to be comparable within experimental error.     

Sodium and silver phosphate glasses doped with chlorides of Fe,Mn and Zn

A number of samples of sodium and silver phosphate glasses doped with various compositions of some transition metals viz. iron, manganese and zinc chlorides alongwith undoped samples of sodium and silver phosphate glasses were synthesized and characterized by X-ray diffraction, IR spectral, electrical conductivity and differential scanning calorimetry (DSC). The glass transition temperature (T _g) and crystallization temperature (T _c) values obtained from DSC curves were found to increase with increasing concentration of the dopant Fe/Mn/Zn chlorides in both sodium and silver phosphate glasses and the following sequence is observed: T _g(–FeCl₃)>T _g(–MnCl₂)>T _g(–ZnCl₂) T _c(–FeCl₃)>T _c(–MnCl₂)>T _c(–ZnCl₂) The increase in T _g and T _c values indicate enhanced chemical durability of the doped glasses. The electrical conductivity values and the results of FTIR spectral studies have been correlated with the structural changes in the glass matrix by the addition of different transition metal cations as dopants.     

Kinetics of crystallization of Zr52Cu18Ni14Al10Ti6 metallic glass

Metallic glasses have received considerable attention in comparison to normal metallic materials due to their superior physical and mechanical properties. These systems possess large under cooled region, ∆T (∆T = T _x − T _g where, T _x is crystallization temperature and T _g is glass transition temperature) and hence increased thermal stability against crystallization. Due to this, the study of their crystallization kinetics is important and interesting. It is interesting because of the fact that, crystallization becomes multi-step process due to several components present in these systems. In this paper, we report the experimental investigations of crystallization of Zr₅₂Cu₁₈Ni₁₄Al₁₀Ti₆ glassy alloy system, which is among the best non-beryllium containing glasses, using differential scanning calorimetry (DSC). The crystallization, as expected, consists of multiple steps. Interestingly, the peak heights of these steps vary with heating rate. At lower heating rates, first peak is most prominent and subsequently diminishes with increase in heating rate with last peak prominence visible at highest heating rate. Both, iso-kinetic and iso-conversional methods of analysis of kinetics of crystallization have been used to evaluate the activation energy and Avrami exponents and consistent results are obtained.     

Thermal analysis and thermochemistry of vitreous into crystalline state transition

Thermochemistry and structural mechanism of crystallization of MgO-Al₂O₃-SiO₂ glasses with TiO₂ as crystallization activator were studied. Thermal and HREM investigation proved that near the T _g temperature crystallization is going by rearrangement of glass structure elements and part of its components redistribution like at disorder — order phase transition in solid bodies. Nanocrystals of Mg-titanate and high quartz structure solid solution are formed then. Next enstatite and cordierite are crystallizing. Thermochemical and chemical bonds strength analysis indicate that during multistage crystallization of glasses, kind and order of crystal phase formation, is determined by the glass structure decomposition progress and its particular components release accompanying increase of temperature. It has been proved that molar heat capacity change (ΔC _p) accompanying the glass transition is the significant measure of degree of changes in the structure of glass preceding crystallization. This revised version was published online in July 2006 with corrections to the Cover Date.     

Effect of MoO<Subscript>3</Subscript> additions on the thermal stability and crystallization kinetics of PbO–Sb<Subscript>2</Subscript>O<Subscript>3</Subscript>–As<Subscript>2</Subscript>O<Subscript>3</Subscript> glasses

The present paper reports on the effect of MoO₃ on the glass transition, thermal stability and crystallization kinetics for (40PbO–20Sb₂O₃–40As₂O₃)_100−x –(MoO₃) _x (x = 0, 0.25, 0.5, 0.75 and 1 mol%) glasses. Differential scanning calorimetry (DSC) results under non-isothermal conditions for the studied glasses were reported and discussed. The values of the glass transition temperature (T _g) and the peak temperature of crystallization (T _p) are found to be dependent on heating rate and MoO₃ content. From the compositional dependence and the heating rate dependence of T _g and T _p, the values of the activation energy for glass transition (E _g) and the activation energy for crystallization (E _c) were evaluated and discussed. Thermal stability for (40PbO–20Sb₂O₃–40As₂O₃)_100−x –(MoO₃) _x glasses has been evaluated using various thermal stability criteria such as ΔT, H _r , H _g and S. Moreover, in the present work, the K _r(T) criterion has been considered for the evaluation of glass stability from DSC data. The stability criteria increases with increasing MoO₃ content up to x = 0.5 mol%, and decreases beyond this limit.     

Thermal study of Mn-containing silicate–phosphate glasses

Silicate-phosphate glasses of SiO₂–P₂O₅–K₂O–MgO–CaO system containing manganese cations were investigated to obtain information about the influence of manganese ions on the thermal behavior of such glasses. Amorphous state of glasses and the course of phase transformation and crystallization taking place during their heating were investigated by DSC, XRD, and FTIR methods. It was shown that an increasing content of manganese replacing calcium and magnesium in the structure of analyzed glasses causes decrease of glass transition temperature (T _g) and heat capacity change (Δc _p) accompanying the glass transformation. Simultaneously, thermal stability of the glasses increased. Products of multistage crystallization of glasses containing up to 8 mol% of MnO₂ were: marokite (CaMn₂O₄), phosphate of Ca₉MgK(PO₄)₇ type, and diopside (CaMgSi₂O₆). Product of crystallization of glasses containing higher amount of manganese was braunite (Mn₇O₈SiO₄). This was accompanied by change of structure of magnesium calcium silicates from diopside-type structure to akermanite-type silicates (Ca₂MgSi₂O₇). The data interpretation was based on bonds and chemical interactions of the individual components forming the glass structure.     

Influence of MgO (CaO) on the structure of silicate-phosphate glasses

Thermal and structural properties of model silicate-phosphate glasses containing the different amounts of the glass network modifiers, i.e. Mg²⁺ and Ca²⁺ were studied. To explain the changes of the parameters characterizing the glass transition effect (T_g, Δc_p) and the crystallization process (T_c, ΔH) depending on the cations modifiers additions, analysis of the bonds and chemical interactions of atoms in the structure of glasses was used. ³¹P MAS-NMR spectra of SiO₂–P₂O₅–MgO(CaO)–K₂O glasses show that the phosphate complexes are mono- and diphosphate. It has been found that increasing amounts of Mg²⁺ or Ca²⁺ cations in the structure of glasses causes the reduction of the degree of polymerization of the phosphate framework (Q¹→Q⁰). The influence of increasing of modifiers in the structure of silicate- phosphate glasses on the number of non-bridging oxygens per SiO₄ tetrahedron and density of glasses was presented.     

Non-isothermal crystallization kinetics of V2O5-MoO3-Bi2O3 glasses

Characteristic temperatures, such as T _g (glass transition), T _x (crystallization temperature) and T _l (liquidus temperature) of glasses from the V₂O₅-MoO₃-Bi₂O₃ system were determined by means of differential thermal analysis (DTA). The higher content of MoO₃ improved the thermal stability of the glasses as well as the glass forming ability. The non-isothermal crystallization was investigated and following energies of the crystal growth were obtained: glass #1 (80V₂O₅·20Bi₂O₃) E _G=280 kJ mol^-1, glass #2 (40V₂O₅·30MoO₃·30Bi₂O₃) E _G=422 kJ mol^-1 and glass #3 (80MoO₃·10V₂O₅·10Bi₂O₃) E _G=305 kJ mol^-1. The crystallization mechanism of glass #1 (n=3) is bulk, of glass #3 (n=1) is surface. Bulk and surface crystallization was supposed in glass #2. The presence of high content of a vanadium oxide acts as a nucleation agent and facilitates bulk crystallization. This revised version was published online in August 2006 with corrections to the Cover Date.     

Thermal coefficient of linear expansion of non-crystalline chalcogenides in the As-S-Se-Te-I system

The object of the paper is an investigation of the glasses of the (As₂S₃)_x(AsSe_0.5Te_0.5I)_100-x. type for 65≤;x≤;95, using methods of thermomechanical analysis. Values of the thermal coefficients of linear expansion in solid and visco-plastic phase were determined. it was shown that introducing arsenic-sulfide in glass-matrix AsChI, i.e. (AsSe_0.5Te_0.5I), leads to an increasing stability of these glasses. The characteristic temperatures of softening Tg and the temperature of the beginning of deformation t_w increase by increasing content of As₂S₃. The analytical forms of dependence of four significant physical values α_g, α_l, Tg, Tw, as a function of As₂S₃ content in the structure of glasses were fitted. This revised version was published online in July 2006 with corrections to the Cover Date.     

Determination of thermal parameters of glasses from the system Bix(As2S3)100?x based on DSC curves

Thermal properties of glasses from the system Bi _x (As₂S₃)_100−x were studied by differential scanning calorimetry of a representative series of samples with x = 0.5, 2, 4, 6, 8, and 10 at.% Bi by determining the characteristic temperatures (T _g, T _onset, T _c, T _m) and enthalpies (H _c, H _m) of the processes taking place in the samples during their thermal treatment. Analysis of DSC recordings for the samples at the same heating rate allowed characterization of the phase transition temperature T _g as a function of the content of doping atoms in accordance with the criteria of chemical bonds formation in amorphous materials. Samples with 4 and 6 at.% Bi were thermally treated at different heating rates with the aim of determining, among the others, the parameters of their thermal stability. The assessment was done based on three different criteria. A higher tendency toward crystallization was observed with the glasses having a higher Bi content. Also, a trend of T _g shifting toward higher values, observed with increase in the heating rate, is in concordance with the Lasocka equation.     

Effect of a porous medium on the phase transitions and mobility of cyclohexane molecules

The effect of a porous medium on the phase transitions and molecular mobility of cyclohexane at a liquid content corresponding to a monolayer is studied by pulsed NMR. The times of longitudinal T ₁ and transverse T ₂ magnetic relaxation of protons of cyclohexane introduced into granulated porous glasses of the Vycor type with average pore diameters of 4, 11, and 32 nm are measured in the temperature range of 128–293 K. In spite of a relatively low liquid content, two phase transitions are observed for all porous glass samples at temperatures lower than those inherent in pure cyclohexane. At low temperatures, nonfreezing cyclohexane volumes with characteristic times of T ₂ ～ 100–200 μs and relative populations of 5–10% remain preserved due to the presence of a small number of micropores commensurable with molecular sizes. The appearance of an additional component with T ₂ ～ 200 μs upon temperature elevation to 148 K attests to thawing out of some cyclohexane volumes, which begins long before the crystal-plastic crystal phase transition. The nonexponential character of the transverse magnetization decay of cyclohexane above the temperature of the plastic crystal-liquid phase transition in the porous glass with a pore diameter of 4 nm suggests the existence of barriers for rapid molecular exchange. The obtained experimental results are indicative of the cluster mechanism of cyclohexane adsorption in the studied porous glasses.     

Thermal and structural studies of nanocrystallization of oxyfluoride glasses

The influence of fluorine content on the structure and crystallization of oxyfluoride glasses from the Na₂O–Al₂O₃–SiO₂–LaF₃ system was studied by DTA/DSC, XRD, FTIR and SEM methods. It has been found that the increase in the fluorine content in the structure of oxyfluoride glasses causes the increase of the flexibility of their structure, which inhibits the process of crystallization of the silicate- aluminium matrix. Simultaneously the ability of the glass for LaF₃ crystallization, which shows a multistage character, is increasing. Analysis of the local atomic interactions in the structure of glasses has been used to explain the course of the crystallization.     

The Effect of Thermal Treatment on the Structural and Electrokinetic Properties of Porous Glass Membranes

The properties of porous glass membranes prepared by acid leaching of sodium borosilicate glasses 8B and 8V and also 8B glass containing small amounts of fluorine and phosphorus (SFP) are comprehensively studied. The effect of the composition and conditions of thermal treatment of the original and porous glasses on their structural (specific surface area, structure resistance coefficient, average pore radius, volume porosity, and filtration factor) and electrokinetic characteristics (conductivity, counterion transport numbers, and electrokinetic potential) in KCl solutions at neutral pH values is studied. It is shown that an increase in thermal treatment temperature T _TT of the porous glasses from 120 to 750°C leads to a decrease in structure resistance coefficient β of 8B membranes. For membranes prepared from SFP glass, β values, efficiency coefficients, and counterion transport numbers are virtually independent of T _TT at 120–600°C and increase at T _TT = 750°C. Specific surface area and volume porosity decrease with a rise in T _TT for all studied membranes. The observed regularities of variations in the membrane characteristics are explained by the increasing fraction of large pores because of sintering of small pores with an increase in T _TT and by the different amounts of secondary silica in the pore space of porous glasses.__________Translated from Kolloidnyi Zhurnal, Vol. 67, No. 3, 2005, pp. 299–307.Original Russian Text Copyright © 2005 by Volkova, Ermakova, Sidorova, Antropova, Drozdova.     

Kinetic Studies of Bulk Ge22Se78−xBix (x=0, 4 and 8) Semiconducting Glasses

Results of phase transformations, enthalpy released and specific heat of Ge₂₂Se_78–xBi_x(x=0, 4 and 8) chalcogenide glasses, using differential scanning calorimetry (DSC), under non-isothermal condition have been reported and discussed. The glass transition temperature, T _g, is found to increase with an average coordination number and heating rates. Following Gibbs—Dimarzio equation, the calculated values of T _g (i.e. 462.7, 469.7 and 484.4 K) and the experimental values (i.e. 463.1, 467.3 and 484.5 K) increase with Bi concentration. Both values of T _g, at a heating rate of 5 K min^–1, are found to be in good agreement. The glass transition activation energy increases i.e. 102±2, 109±3 and 115±8 kJ mol^–1 with Bi concentration. The demand for thermal stability has been ensured through the temperature difference T _c–T _g and the enthalpy released during the crystallization process. Below T _g, specific heat has been observed to be temperature independent but highly compositional dependent. The growth kinetic has been investigated using the Kissinger, Ozawa, Matusita and modified JMA equations. Results indicate that the crystallization ability is enhanced, the activation energy of crystallization increases with increasing the Bi content and the crystal growth of these glasses occur in 3 dimensions.This revised version was published online in November 2005 with corrections to the Cover Date.     

Mobile ion transport pathways in (LiBr) x [(Li2O)0.6(P2O5)0.4](1−x) glasses

(LiBr) _x [(Li₂O)_0.6(P₂O₅)_0.4]_{(1 − x)} glasses with 0 ≤ x ≤ 0.2 are prepared by melt quenching. Glass transition temperature (T _g), ionic conductivity (σ), and its activation energy (E _a) are determined experimentally and correlated to molecular dynamics (MD) simulations with an optimized potential, fitted to match bond lengths, coordination numbers, and ionic conductivity. Based on equilibrated MD configurations, ion transport pathways are modelled in detail by the bond valence approach to clarify the influence of the halide dopant concentration on the glass structure and its consequence for Li ion mobility. Results of experimental and computational studies are compared with our previous report on the (LiCl) _x [(Li₂O)_0.6(P₂O₅)_0.4]_{(1 − x)} system. Both T _g and σ values are higher for LiBr-doped glasses than for LiCl-doped glasses, but the effect of halide doping is unusually small.     

Thermal studies of ZnO–B<Subscript>2</Subscript>O<Subscript>3</Subscript>–P<Subscript>2</Subscript>O<Subscript>5</Subscript>–TeO<Subscript>2</Subscript> glasses

The effect of TeO₂ additions on the thermal behaviour of zinc borophosphate glasses were studied in the compositional series (100 − x)[0.5ZnO–0.1B₂O₃–0.4P₂O₅]–xTeO₂ by differential scanning calorimetry, thermodilatometry and heating microscopy thermal analysis. The addition of TeO₂ to the starting borophosphate glass resulted in a linear increase of glass transition temperature and dilatometric softening temperature, whereas the thermal expansion coefficient decreased. Most of glasses crystallize under heating within the temperature range of 440–640 °C. The crystallization temperature steeply decreases with increasing TeO₂ content. The lowest tendency towards crystallization was observed for the glasses containing 50 and 60 mol% TeO₂. X-ray diffraction analysis showed that major compounds formed by annealing of the glasses were Zn₂P₂O₇, BPO₄ and α-TeO₂. Annealing of the powdered 50ZnO–10B₂O₃–40P₂O₅ glass leads at first to the formation of an unknown crystalline phase, which is gradually transformed to Zn₂P₂O₇ and BPO₄ during subsequent heating.     

Application of the “Tg-Δ rule” to the local structural study of ferrate glasses

A linear relationship exists between the glass transition temperature (T _g) and the quadrupole splitting (Δ) of Fe(III). The linear relationship, termed ‘T _g-Δ rule’, has been verified in 60CaO·(40-x)Al₂O₃·xFe₂O₃, 60CaO·10BaO·(30-x) Al₂O₃·xFe₂O₃, 60CaO·(40-x)Ga₂O₃·xFe₂O₃, and 50CaO·(50-x)Ga₂O₃·xFe₂O₃ glasses. In these glasses, both theT _g and Δ decrease linearly with an increasing content of Fe₂O₃ (≈40 mol%). The slope of the straight line, obtained from the plot of theT _g vs. Δ, was calculated to be 670≈700, °C/(mm·s⁻¹), revealing that the Fe(III) constitutes the skeleton of aluminoferrate and galloferrate glasses.     

Crystallization study of Sn additive Se–Te chalcogenide alloys

Calorimetric study of Se_85−x Te₁₅Sn _x (x = 0, 2, 4 and 6) glassy alloys have been performed using Differential Scanning Calorimetry (DSC) under non-isothermal conditions at four different heating rates (5, 10, 15 and 20 °C/min). The glass transition temperature and peak crystallization temperature are found to increase with increasing heating rate. It is remarkable to note that a second glass transition region is associated with second crystallization peak for Sn additive Se–Te investigated samples. Three approaches have been employed to study the glass transition region. The kinetic analysis for the first crystallization peak has been taken by three different methods. The glass transition activation energy, the activation energy of crystallization, and Avrami exponent (n) are found to be composition dependent. The crystallization ability is found to increase with increasing Sn content. From the experimental data, the temperature difference (T _p − T _g) is found to be maximum for Se₈₃Te₁₅Sn₂ alloy, which indicates that this alloy is thermally more stable in the composition range under investigation.     

The effect of mechanical activation on the thermal reactions of P2O5–Al2O3–Fe2O3–Na2O phosphate glasses

The effect of mechanical activation on the structure and thermal reactions of glasses has been studied on the example of Na–Al–Fe phosphate glasses. These glasses are used in nuclear technology for immobilization of radioactive waste. The glasses were activated by grinding in a planetary mill. Mechanical activation causes a decrease of the T _g temperature as well as of the glass crystallization temperature. The type of crystalline phases formed and the quantitative proportions between them are changing. Analysis of inter-atomic interactions in the structure of glass was applied to explain the observed regularities governing the crystallization of the activated glasses.