锗钨酸催化合成水杨酸异戊酯

Isoamyl salicylate was synthesized by using germanotungtic acid as catalyst.The effects of the amaunt of catalyst,the molar ratio of salicycic acid of isoamy l alcohol,the reaction temperature and the reaction time on the yield of ester w ere studied.The optimum reaction conditions were 1.3∶100 (mass ratio) of cataly st to reactants,1∶2.5 (molar ratio) of acid to alcohol,135～153℃ being satisfa ctary reaction temperature and reaction time suitable being 3h.Under such condit ion,the yield of ester was up to 94%.Germanotungtic acid catalyst can be used re peatedly.     

SYNTHESIS OF PROPIONIC ACID AND ITS ESTER FROM CARBON MONOXIDE AND ETHANOL OVER SUPPORTED BIMETAL Ni-Cu CATALYSTS

Under atmospheric pressure,the effects of different carriers,reac-tion temperature and C_2H_5I/C_2H_5OH ratio on synthesis of propionic acid and itsester from carbon monoxide and ethanol over supported bimetal Ni-Cu catalystswere studied.The results show that the active carbon is the best carrier.UsingC_2H_5I circularly in reaction,the space-time yield of propionic acid and its esteris150-180g/kg·h and the yield of acid arid ester is50-60%during a700 hconsecutive reaction.The influences of Cu content in catalyst,O_2 content inCO,CO/C_2H_5OH ratio and reaction temperature on the distribution of producthave also been studied.The reaction for testing the stability of the catalyst iscarried out.     

Study on the Synthesis of Phenylacetic Acid by Carbonylation of Benzyl Chloride under Normal Pressure

The influences of some factors on the yield of phenylacetic acid in the carbonylation of benzyl chloride were studied in this paper. These factors included the variety and content of catalyst, and that of solvent, way of material feeding, reaction temperature, sodium hydrate concentration, triphenylphosphine content, presence of surfactant, the ratio of organic phase volume to aqueous phase volume etc. The optimum reaction conditions were found to be: with a one-time pour of 0.15g Pd(PPh3)2Cl2, 0.24g PPh3, 75ml NaOH of 3.5mol/L, 20ml benzyl chloride and 55ml n-butyl alcohol, and the reaction was carried out at 50℃ for about 3 hours. The as-obtained yield of phenylacetic acid was as high as 97.6%. In addition, the influences of the presence of phenylacetic acid and air in the reaction system were also studied. The results showed that the presence of air in the system and the entrainment of phenylacetic acid in the circulating organic phase had great influence on the reaction rate, the stability and performance of catalyst and the yield of phenylacetic acid.     

Oxidation of glyoxal to glyoxylic acid by oxygen over V2O5/C catalyst

A novel vanadium oxide catalyst supported on active carbon was prepared by an incipient wetness impregnation method, and the precursor was obtained from oxalic acid aqueous solutions of NH4VO3. The catalyst was applied liquid phase oxidation of glyoxal to glyoxylic acid. It was found that V2O5/C catalyst exhibited obvious activity for glyoxal oxidation. Glyoxylic acid could be obtained without pH regulation during the reaction. By using this catalyst, the conversion of glyoxal and the yield of glyoxalic acid were 29.2% and 13.6%, respectively at 313 K and oxygen flow 0.1 L/rain after reaction for 10 h.     

固载Ru基催化剂上二氧化碳加氢合成甲酸Ⅱ反应条件对催化剂性能的影响

The synthesis of formic acid from carbon dioxide and hydrogen using a silica immobilized ruthenium catalyst as precursor has been studied in different reaction conditions. The results revealed that the TOF （turn over frequency） of HCOOH achieved 1481.5 h^-1 on immobilized ruthenium catalyst near the critical pressure point of CO2 with H2 pressure of 4.0 MPa, reaction temperature of 80℃ and PPh3/Ru molar ratio of 6：1. The reaction activity of immobilized catalyst was higher than that of homogeneous catalyst, and the immobilized catalyst also offered the practical advantages such as easy separation and reuse.     

STUDY OF CARBONYLATION OF METHANOL TO ACETIC ACID AND ACETIC ANHYDRIDE OVER A BIDENTATE POLYMER BOUND CIS-DICARBONYLRHODIUM COMPLEX AS CATALYST

Copolymer of 2-vinylpyridine and vinylacetate coordinated with dicarbonylrhodiumused as a catalyst for carbonylation of methanol to acetic acid and anhydride has beenstudied. The structural characteristics of the copolymer ligand and complex, and the in-fluences of the reaction conditions on the carbonylation catalyzed by this polymer complexhave been investigated. In comparison with small molecule catalyst of Rh complex, thebidentate copolymer coordinated complex has better thermal stability. The reactionmechanism of the carbonylation reaction is also illustrated.     

Effect of diluent and reaction parameter on selective oxidation of propane over MoVTeNb catalyst using nanoflow catalytic reactor

The selective oxidation of propane to acrylic acid over an MoVTeNb mixed oxide catalyst, dried and calcined before reaction has been studied using high-throughput instrumentation, which is called nanoflow catalytic reactor. The effects of catalyst dilution on the catalytic performance of the MoVTeNb mixed oxide catalyst in selective oxidation of propane to acrylic acid were also investigated. The effects of some reaction parameters, such as gas hourly space velocity （GHSV） and reaction temperature, for selective oxidation of propane to acrylic acid over diluted MoVTeNb catalyst have also been studied. The configuration of the nanoflow is shown to be suitable for screen catalytic performance, and its operating conditions were mimicked closely to conventional laboratory as well as to industrial conditions. The results obtained provided very good reproducibility and it showed that preparation methods as well as reaction parameters can play significant roles in catalytic performance of these catalysts.     

Highly efficient heterogeneous procedure for the synthesis of fructone fragrancy

A novel heterogeneous strong acid catalyst was synthesized through the copolymerization of p-toluenesulfonic acid and paraformaldehyde and utilized for the synthesis of fructone. The results showed that the catalyst was very efficient for the reaction with the yield over 95%. The advantages of extremely high density of acidity, high thermal and chemical stability, low cost for the simple synthetic procedure, and reusability made the catalyst one of the best choices for the reaction.     

过氧化氢溶液中单和双金属金-银纳米粒子氧化L-亮氨酸的动力学(英文)

The catalytic activity of surfactant stabilized mono-and bimetallic Au and Ag nanoparticles for the oxidation of an amino acid,L-leucine,was studied using hydrogen peroxide as the oxidant.The Au and Ag nanoparticle catalysts exhibited very good catalytic activity and the kinetics of the reaction were found to be pseudo-first order with respect to the amino acid.The effects of several factors,such as oxidant concentration,ionic strength,pH,and catalyst concentration on the reaction,were also investigated.In particular,optimal oxidant and catalyst concentrations were determined.Very high concentrations of the metal nano-catalysts or the oxidant led to a dramatic increase in reaction rate.Moreover,bimetallic Au-Ag catalysts provided higher selectivity than pure Au or Ag.     

加热与超声辐照条件下4-(丁二酰亚胺基)-1-丁烷磺酸Brnsted酸催化剂催化吡喃并[4,3-b]吡喃衍生物合成(英文)

4-(Succinimido)-1-butane sulfonic acid was shown to be an efficient and reusable Brnsted acid catalyst for the synthesis of pyrano[4,3-b]pyran derivatives using thermal and ultrasonic conditions. The catalyst was prepared by mixing succinimide and 1,4-butanesultone, which is simpler and safer than the preparation of succinimide sulfonic acid. This method has the advantages of high yield, clean reaction, simple methodology, and short reaction time. The catalyst can be recycled without loss of activity.     

Study on Ni/C catalysts for vapor phase carbonylation of ethanol

Activated carbon-supported Ni catalysts for vapor phase carbonylation of ethanol to propionic acid in the presence of ethyl iodide as promoter were investigated. Under optimum reaction conditions, the conversions of carbon monoxide and ethanol were measured to be 81.4% and 98.4%, respectively, while the selectivity for propionic acid was found to be 98.65%. The catalyst was stable within 48 h on stream. XRD and XPS methods were used to characterize the structures and surface properties of the fresh and tested catalysts. The characterization results indicated that aggregation of nickel particles and formation of nickel iodide on the catalyst surface should be responsible for the deactivation of the catalysts.     

KSF supported 10-molybdo-2-vanadophosphoric acid as an efficient and reusable catalyst for one-pot synthesis of 2,4,5-trisubstituted imidazole derivatives under solvent-free condition

The one-pot three-component cyclocondensation has been developed involving the reaction of benzil with an aromatic aldehydes and ammonium acetate under thermal solvent-free conditions in the presence of a KSF supported 10-molybdo-2-vanadophosphoric acid catalyst. 10-Molybdo-2-vanadophosphoric acid was immobilized on KSF with a 20% loading, which showed the highest catalytic activity. The catalyst was fully characterized using FT-IR spectroscopy, thermal analysis, XRD and SEM analysis techniques. There are several distinct advantages to this protocol, including high yields, short reaction time, operational simplicity and a recyclable catalyst with a facile work-up procedure.     

HPWA-SBA-15催化合成ETBE

TEM, FTIR and XRD techniques are used to investigate the structure of HPWA-SBA-15. The results show that pores of HPWA-SBA-15 have regular two-dimensional hexagonal structure, and HPWA disperses well in the pore or pore wall of HPWA-SBA-15. NH3-TPD shows the HPWA-SBA-15 catalyst has acidic properties. ETBE is synthesized by the etherification reaction of alcohol and tert-butyl alcohol over several catalysts. Solid acid catalyst HPWA-SBA-15 is the appropriate catalyst which has the highest yield of ETBE than PW12/C and cation resin. The influences of reaction temperature, ratio of alcohol to tert-butyl alcohol are studied. At optimal operation condition, 30% HPWA on HPWA-SBA-15, reaction temperature 100℃, alcohol/tert-butyl alcohol molar ratio 2, the quality catalyst 0.9 g and raw material 10 g, the yield of ETBE is 59.55% and the selectivity is 90.2%.     

无溶剂条件下N-磺酸琥珀酰亚胺催化乙酰化反应(英文)

A small amount of succinimide-N-sulfonic acid efficiently catalyzed the acetylation of a variety alcohols, phenols, thiols, amines and aldehydes with acetic anhydride at room temperature under solvent free conditions. This catalyst has the advantages of excellent yields and short reaction times and the reaction can be carried out on a large scale, which makes it potentially useful for industrial applications.     

A Highly Efficient and Recyclable Solid Acid Catalyst for Synthesis of Spiro-oxindole Dihydroquinazolinones Under Ultrasound Irradiation

A simple,efficient and green procedure for the synthesis of spiro-oxindole dihyfroquinazolinones was developed by multi-component condensation of isatoic anhydride,aniline and isatin in the presence of a novel solid acid catalyst under ultrasound irradiation.The present environmentally benign protocol offers several advantages, such as shorter reaction time,a wide range of fimctional group tolerance,the use of an inexpensive heterogeneous catalyst,and a high yield of products via a simple experimental and work-up procedure.The mesoporous solid acid catalyst was directly prepared from phytic acid by microwave-sulfonation method without template.The phytic acid based solid acid was fully characterized by means of Fourier transform infrared spectroscopy(FTIR),Raman spectroscopy,X-ray diffraction(XRD),X-ray photoelectron spectroscopy(XPS),and transmission electron imcroscopy(TEM).The catalyst can be recovered and reused for at least five runs without significant impact on the product yields.     

ACIDITY OF ZnSM-2 CATALYST AND ITS EFFECTS ON PROPANE AROMATIZATION

The effects of the modification by zinc exchange on the acidity ofSM-2(ZSM-5 type)zeolite catalyst were studied by TPAD and IR spectra ofadsorbed pyridine.The loading of zinc increased Lewis acidity of the catalystand generated more sites with medium acid strength.Both the conversion ofpropane and the yield of aromatics were dependent on the zinc content in thecatalyst.Comparison of the behavior of a fresh and a partly pyridine poisoned0.7ZnSM-2 catalyst for propane conversion showed that the role of zinc speciesmay be:(a)adjusting catalyst acidity to promote propane activation and(b)act-ing as dehydrogenation catalyst for aromatization of olefins.It was shown thatZnSM-2 catalyst has good stability in propane aromatization reaction.     

Chitosan-immobilized Palladium Complex：a Green and Highly Active Heterogeneous Catalyst for Heck Reaction

A green heterogeneous catalyst for Heck reaction-chitosan-immobilized palladium complex was prepared.The catalyst exhibits high activity and stereoselectivity under the moderate reaction conditions.The catalyst can be separated easily from the reaction mixture and reused after washing.Under the suitable reaction conditions,the cross-coupling of iodobenzene (ArI) with acrylic acid (AA) or acrylate can be achieved 93.3% or 99% yield of trans-cinnarnic acid or trans-cinnamic ester.     

The SBA-15/SO3H nanoreactor as a highly efficient and reusable catalyst for diketene-based, four-component synthesis of polyhydroquinolines and dihydropyridines under neat conditions

An efficient diketene ring-opening synthesis of polyhydroquinoline derivatives using SBA-15 sulfonic acid modified mesoporous substrates a green and reusable catalyst in a single-pot four-component coupling reaction of diketene,alcohol,enamine,and aldehydes is reported.Dihydropyridine derivatives based on neat adduct of diketene,alcohols and aldehydes using SBA-15/SO₃H nanoreactor as catalyst via a four-component reactions are also synthesized.The advantages of the present method include the use of a small amount catalyst,simple procedure with an easy filterable work-up,waste-free,green and direct synthetic method with an excellent yield of products with efficient use of catalyst and a short reaction time.     

Electrochemical Behavior of Methanol Influenced by Polyaniline Incorporated with Ferrocenesulfonic-carboxylic Acid

After the synthesis of polyaniline in the presence of ferrocenesulfoniccarboxylic acid, its influence on the electrochemical reaction of methanol was studied. The result indicates that the ferrocenyl in ferrocenesulfoniccarbexylic acid plays an important role in the electrocatalytic oxidation of methanol. CH3OH is adsorbed on PANI-Fc before its electrocatalytic oxidation. When the concentration of methanol is 2 mol/L, it begins to be oxidized. The effect of scan rate on the electrochemical reaction of methanol was also studied and 5 mV/s was favourable. It is another method to insert a metal catalyst in polyaniline without its electrodeposition.     

固体酸烷基化催化剂表面上焦炭前身物的结构和物化表征

In order to lay a foundation for effective regeneration of P W heteropoly acid catalyst supported on SiO 2 aged in the alkylation of isobutane with butene, the molecular structure and physicochemical properties of coke precursor deposited on the surface of solid acid alkylation catalyst are clearly recognized and identified by means of various characterization approaches, including IR, NMR, GC MS and GC. According to the characterization results, the coke precursors are mainly made up of long chain saturated hydrocarbons and small amount of polynucleo aromatics. The coke precursors deposit on the catalysts do not block the pores of the catalysts, but deposited on the acid centres of catalyst. It causes that the acid strength of active centres of the catalyst descends, and selectivity for alkylation becomes worse. It is found that the species of coke precursor consist of C 13 ～C 21 paraffin. The results obtained in the project are different entirely from that other researchers gained before. It will be of benefit to investigate and find out new regeneration methods of solid acid alkylation catalyst.