Ce0.8Y0.2O1.9-Ca3(PO4)2-K3PO4复合电解质在中温区的质子导电性及在常压合成氨中的应用

A precursor of Ce_0.8Y_0.2O_1.9(YDC) solid electrolyte was synthesized by the gol-gel method. YDC and phosphates powders were prepared by mixing the YDC and phosphates according to different weight ratios. The mixtures of the YDC and binary phosphates were ground and sintered at 1 400 ℃. The proton conductivity in solid electrolyte of the sintered samples was examined using electrochemical methods at 400～800 ℃. Ammonia was synthesized from nitrogen and hydrogen at atmospheric pressure in the solid state proton conducting cell reactor. The optimal condition for the ammonia production was determined. The result indicated that composite electrolyte of 80wt% YDC: 20wt% binary phosphates as proton conductor could obtain the highest ionic conductivity and ammonia production rate among the four samples, the rate of evolution of ammonia was up to 9.5 × 10^-9 mol·s^-1·cm^-2.     

BaCe0.9Nd0.1O3-δ柠檬酸盐法合成、表征及其在中温区的电导率

A precursor of BaCe_0.9Nd_0.1O_3-δ solid electrolyte was synthesized by the sol-gel method and sintered at 1400℃.The obtained gels and powder were characterized by differential and ther mogravimetric thermal analysis(TG-DTA),X-ray diffraction(XRD), transmissi on electron microscopy(TEM).Using the sintered samples as solid electrolyte and silver-palladium alloy as electrodes,electrical conductivities under different gas ambiences at intermediate temperature (400～600℃) were measured. In moist hydrogen atmosphere, the conduction is a little higher than that of dry hydrogen atmosphere. In hydrogen atmosphere, proton conduction may predominate, leading to an increase in conductivity and a decrease in activation energy.     

新型阴极材料Ba0.5Sr0.5Co0.8Fe0.2O3-σ制备与性能研究

Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3-σ(BSCF), a new cathode material for solid oxide fuel cell (SOFC), was synthesized by polyacrylicacid (PAA) method. The lattice structures of samples calcined at different temperatures were characte-rized by XRD. Shrinkage, porosity and pore size of the porous BSCF as a function of sintering temperature were investigated. It was found that the cubic perovskite structure could be formed after calcination at 800 ℃ for 2 h, but not well crystallized as seen from some unknown phases, and the pure cubic perovskite structure was formed after calcination at 1 150 ℃ for 2 h. The particle size of BSCF was less than 1～2 μm. The shrinkage of the porous BSCF increased with sintering temperature, but the opposite was true for the porosity. After sintering at 1 100 ℃ for 4 h, the porous BSCF was still in an appropriate structure, with porosity of 29% and electrical conductivity above 400 S·cm^-1.     

La0.9Sr0.1Al0.9Mg0.1O3-δ-Ca3(PO4)2-K3PO4复合电解质的合成及在常压天然气合成氨中的应用

La_0.9Sr_0.1Al_0.9Mg_0.1O_0.9(LSAM) was synthesized by the sol-gel method, an oxide-salt composite electrolyte LSAM-Ca₃(PO₄)₂-K₃PO₄ was prepared by mixing the LSAM and phosphates. The mixture was ground and sintered at 1 400 ℃. Using the LSAM electrolyte and its oxide-salt composite as solid electrolytes and silver-palladium alloy as electrodes, electrical conductivity was measured at different conditions. Ammonia was synthesized from wet natural gas and nitrogen at atmospheric pressure in the solid state proton conducting cell reactor and the optimal conditions for ammonia production were determined. The oxide-salt composite exhibited much higher ionic conductivity and ammonia production rate than that of the LSAM electrolyte at 400～800 ℃, the rate of evolution of ammonia was up to 5.30 × 10^-9 mol·cm^-2·s^-1.     

由乙氧基铅配合物制备纳米PbO

Lead complex was directly synthesized by electrochemical dissolution of lead in a cell without separating the cathode and anode. The product was characterized by FTIR, Raman spectra and ¹H NMR. The xerogel was prepared by a direct sol-gel of the electrolyte solution and then dryness of it. The xerogel was heated at 450 ℃ for 2 h to obtain the nano-PbO powder. FTIR, XRD, and TEM were used to investigate the structure of nano-PbO. The results show that the lead complex is Pb(OEt)₂(acac)₂, which contains acac- group and could prevent the precursor from hydrolysis and sintering during the calcinations process. The nano-PbO of 20～30 nm was thus obtained in a high purity by drying at 450 ℃.     

双孔块状SiO2载体材料的孔结构及其酶活性的研究

SiO₂ monoliths with double-pore structure were synthesized with tetraethyl orthosilicate, polyethylene glycol, starch, ethanol and ammonia as the main raw materials via a sol-gel route. The effect of different content of starch of the samples was studied on the mesopore structure, macropore appearance, hydrothermal stability and enzyme activity to immobilize gluczyme. The results indicate that porous blocks with mesopores of 10～12 nm and macropores of 10～30 μm can be formed by the removal of polyethylene glycol and starch after heating at 600 ℃. The minimal density of the obtained samples was 0.34 g·cm^-3 and the maximal porosity was 76%. After being immersed in water at 80 ℃ for 7 d, the density, porosity and shape of N₂ adsorption-desorption curves of the samples were almost unchanged, showing that the sample has a good hydrothermal stability. The initial enzyme activity of sample P2KD30 was 11 190 U, and definite enzyme activity could be maintained after five cycles.     

Li4Ti5O12溶胶-凝胶法合成及其机理研究

The precursors of Li₄Ti₅O₁₂ were prepared from tetrabutyl titanate and lithium acetate by sol-gel process. The Li₄Ti₅O₁₂ samples were synthesized by calcining the gel precursors at 400～900 ℃ in air for 6～20 h. Its reaction mechanism was investigated by infrared spectroscopy(IR), thermogravimetry(TG) and X-ray diffraction(XRD). The effects of sinter-temperature, calcination-time and thermal-treatment for the products were discussed. The samples were characterized by X-ray diffraction(XRD), scanning electron microscopy(SEM). The results showed that the single-phase products were obtained by calcining the gel precursors at 800 ℃ in air for 20 h, the sinter-temperature was lower than that of solid-state method, the particles were narrowly distributed, well crystallized with a size range from 0.3μm to 0.5 μm.     

储氧材料制备过程中的结构及织构变化

Ce_0.65Zr_0.35O₂ solid solution was prepared by co-precipitation method and characterized by X-ray diffraction (XRD), Raman spectra, BET, oxygen storage capacity (OSC) and temperature-programmed reduction measurements (H₂-TPR) after calcination at 100 ℃, 300 ℃, 600 ℃, and 1 000 ℃. The results showed that the precipitation was a crystalline of fluorite structure, and in the process of the precipitation transformation into Ce_0.65Zr_0.35O₂ solid solution, the fluorite structure of the precipitation kept unchanged. The samples had different BET surface areas and OSC at different temperatures, but they held the performance of stable structure. After 1 000 ℃, there didn′t appear the other crystalline phase. So the samples prepared by co-precipitation method had excellent texture and higher thermal stability.     

铜铬类水滑石的表征及其催化性能

The CuCr-Hydrotalcite-like Compounds were synthesized by co-precipitation method. The samples were characterized by XRD, FTIR and N₂-adsorption/desorption measurements. The catalytic performance of the material synthesized was evaluated for the synthesis of benzion methyl ether with benzaldehyde and methanol. The result show that well crystallized hydrotalcites are obtained when n_Cu/n_Cr molar ratio is 2.0 and final value of pH is 4.3±0.2. The crystal shape is remained the same while crystallinity, surface area, pore structure and activity vary with the molar ratio of Cu to Cr. The catalytic activity is the best when the molar ratio of Cu to Cr is 2.0 at 50 ℃ andreaction time is 90 min. The highest conversion of benzaldehyde could reach 89.56％,while the selectivity of benzoin methyl ether is nearly 100％.     

SrCe0.95Er0.05O3-α固体电解质的导电性

SrCe_0.95Er_0.05O_3-α ceramic of a single orthorhombic phase of perovskite-type SrCeO₃ was prepared by high-temperature solid state reaction. Using the ceramic as solid electrolyte and porous platinum as electrodes, the measurements of conductivities and ionic transport numbers on SrCe_0.95Er_0.05O_3-α ceramic were performed by using electrochemical methods in the temperature range of 600～1 000 ℃ in wet hydrogen, dry air and wet air, respectively. The results indicate that the sample is a pure protonic conductor with a maximal conductivity of 0.01 S·cm^-1 in wet hydrogen, a mixed conductor of oxide-ion and hole in dry air, and a mixed conductor of proton, oxide-ion and hole in wet air.     

Furyl- and thienyl-silatranes and germatranes

We review our research on the synthesis and study of the physical and biological properties of furyl- and thienylgermatranes and -silatranes.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 6, pp. 725–732, June, 1992.     

Review and patents and literature

The use of the insect cell/baculovirus expression system for producing recombinant proteins of bacterial, plant, insect, and mammalian origin has become widespread. The popularity of this eukaryotic expression system is due to many factors, including (1) potentially high protein expression levels, (2) ease and speed of genetic engineering, (3) ability to accommodate large DNA inserts, (4) protein processing similar to higher eukaryotic cells (e.g., mammalian cells), and (5) ease of insect cell growth (e.g., suspension growth). The following review of the literature discusses two engineering aspects of recombinant protein synthesis by insect cell cultures: bioreactor scale-up and insect cell line selection. Following this review patent abstracts and additional literature pertaining to expression of recombinant proteins in insect cell culture are listed.     

多环芳二酐型聚酯亚胺膜的透气性能

多环芳二酐型聚酯亚胺膜的透气性能李悦生，丁孟贤，徐纪平（浙江大学高分子科学与工程研究所，杭州，３１００２７）（中国科学院长春应用化学研究所）关键词聚醚酰亚胺，聚酯酰亚胺，膜，透气性通常的聚酰亚胺加工性能较差，在芳环二酐的苯环间引入醚键等柔性基团后，其...     

Ground- and excited-state aromaticity and antiaromaticity in benzene and cyclobutadiene

The aromaticity and antiaromaticity of the ground state (S 0), lowest triplet state (T 1), and first singlet excited state (S 1) of benzene, and the ground states (S 0), lowest triplet states (T 1), and the first and second singlet excited states (S 1 and S 2) of square and rectangular cyclobutadiene are assessed using various magnetic criteria including nucleus-independent chemical shifts (NICS), proton shieldings, and magnetic susceptibilities calculated using complete-active-space self-consistent field (CASSCF) wave functions constructed from gauge-including atomic orbitals (GIAOs). These magnetic criteria strongly suggest that, in contrast to the well-known aromaticity of the S 0 state of benzene, the T 1 and S 1 states of this molecule are antiaromatic. In square cyclobutadiene, which is shown to be considerably more antiaromatic than rectangular cyclobutadiene, the magnetic properties of the T 1 and S 1 states allow these to be classified as aromatic. According to the computed magnetic criteria, the T 1 state of rectangular cyclobutadiene is still aromatic, but the S 1 state is antiaromatic, just as the S 2 state of square cyclobutadiene; the S 2 state of rectangular cyclobutadiene is nonaromatic. The results demonstrate that the well-known "triplet aromaticity" of cyclic conjugated hydrocarbons represents a particular case of a broader concept of excited-state aromaticity and antiaromaticity. It is shown that while electronic excitation may lead to increased nuclear shieldings in certain low-lying electronic states, in general its main effect can be expected to be nuclear deshielding, which can be substantial for heavier nuclei.     

微量元素与疾病诊断治疗的研究现状及展望

对国内外微量元素与疾病的关系及其诊断治疗的研究现状及研究动向进行了综述，包括：微量元素与地方病、癌肿、心血管病、糖尿病、眼病、神经系统病等。参考文献72篇。