Stresses in adhesive joints in cylindrical shells and panels

The stresses in adhesive joints in cylindrical shells and panels are determined for the general case of loading. The effects of joint length and the parameters of the adhesive, the shells, and the panels on the magnitude of these stresses are investigated.Aviation Technology Institute, Moscow. Translated from Mekhanika Polimerov, No. 6, No. 1093–1103, November–December, 1972.     

Residual stresses in glass-reinforced polyethylene

The variation of the axial and radial components of the residual stresses in fiber-reinforced polyethylene with distance from the fiber has been investigated. It is shown that, irrespective of the agent employed, coupling leads to an increase in stresses. The values obtained for the residual stresses are compared with the adhesion strength determined by the shearing method. The effect of a structure-forming agent on the residual stresses is investigated.Mendeleev Moscow Chemical Engineering Institute. Translated from Mekhanika Polimerov, No. 4, pp. 722–724, July–August, 1971.     

Residual stresses in glass-reinforced plastics parts

The determination of the residual stresses in glass-reinforced plastics elements is considered. It is shown that these stresses reach appreciable values and should be taken into account in strength calculations. Quantitative data are supplied for a series of materials. At normal operating temperatures the residual stresses are stable.Moscow Aviation Technological Institute. Translated from Mekhanika Polimerov, No. 6, pp. 1117–1119, November–December, 1969.     

Results of an experimental investigation of the residual stresses in wound glass-reinforced plastics

The results of an experimental investigation of the residual stresses in wound glass-reinforced plastic rings are presented. The residual stresses were determined by the Davidenkov method. The dependence of the maximum tensile and compressive circumferential stresses on ring thickness and polymerization temperature is investigated. The experimental data are compared with the results of calculations based on the theory proposed in [1, 2].Moscow Power Engineering Institute. Translated from Mekhanika Polimerov, No. 6, pp. 1116–1119, November–December, 1970.     

Investigation of the temperature residual stresses and strains in thick-walled wound reinforced plastic products

The kinetics of the temperature residual stresses and strains in thick-walled reinforced-plastic cylinders and rings have been experimentally investigated employing a special procedure for continuously monitoring the internal strains and stresses in the various zones of the semifinished product during the heat treatment stage. The effect of the resin polymerization (polycondensation) temperature and the mandrel material on the magnitude and distribution of the temperature stresses is considered. The total residual stresses have been determined by a nondestructive strain-gauge method with differentiation of the components.Translated from Mekhanika Polimerov, No. 6, pp. 1040–1046, November–December, 1971.     

Nonuniform isothermal curing of cylindrical products made of polymeric composites

Conclusion By increasing the curing temperature and reducing the winding rate, it is possible to obtain compressive radial stresses in a cylindrical product during the entire curing stage — which should prevent loss of integrity during the curing operation. When the duration of the curing process is limited, the magnitude of the compressive stresses will depend in an extreme manner on curing temperature. Meanwhile, in the general case, ensuring minimal residual stresses will not ensure the absence of tensile radial stresses during curing.Translated from Mekhanika Kompozitnykh Materialov, No. 5, pp. 873–877, September–October, 1988.     

Variation of the residual stresses during the fabrication of thick-walled wound glass-reinforced plastic articles

The results of an experimental investigation of the development of the residual stresses in thick-walled glass-reinforced plastic cylinders during the fabrication process are presented. The variation of the stresses from the beginning of winding to removal of the cyclinders from the mandrel is examined.Translated from Mekhanika Polimerov, No. 2, pp. 355–357, March–April, 1974.     

Factors in the adhesion strength of polymers toward a solid substrate

The true adhesion is looked upon as the sum of the experimentally determined strength of the glued area, internal stresses, and unaccountable technological losses (unrealized contacts). It has been established that the internal stresses do not depend on the value of the adhesion strength.Translated from Mekhanika Polimerov, No. 2, pp. 356–359, March–April, 1976.     

Internal stresses in crystallizing polymer coatings

The effect of crystalline structure on the internal stresses in polyethylene coatings has been studied. An equation for the internal stresses in crystallizing polymer coatings has been derived. The important role of orientation processes is demonstrated.Leningrad Lensovet Technological Institute. Translated from Mekhanika Polimerov, Vol. 4, No. 6, pp. 992–996, November–December, 1968.     

Experimental studies on the adhesion strength of a polymer-metal bond depending on the contact zone geometry

Theoretical investigation of the stress-strain state at special points of constructions, e.g., in adhesion joints, has demonstrated that the stress state in the contact zone strongly depends on the configuration of the zone. In order to verify these results, some experiments were carried out. Cylindrical polymer specimens having a circular groove at one of its ends were cemented to steel mushrooms and tested for abruption in tension and cantilever bending. The experiments showed that the adhesive strength depended on the profile of the joint and had a maximum at the optimum value of the angle of the joint and a minimum when the groove was absent. The ratio between the maximum and minimum strength values was 1.5 in tension and 2.5 in bending. The greater effect in the latter case can be explained by the high gradient of the stresses in bending. The experimental results confirmed the possibility of controlling the adhesive strength by changing the contact geometry in accord with the stress-strain calculations.Institute of the Mechanics of Continuous Media, Russian Academy of Sciences, Perm', Russia. Translated from Mekhanika Kompozitnykh Materialov, Vol. 35, No. 4, pp. 493–498, July–August, 1999.     

Experimental study of the effect of technological parameters on the residual stresses in thin-walled coiled parts

The effect of the parameters of heat treatment and programmed winding under tension on the residual stresses in thin-walled coiled parts made from glass plastic by the "dry" winding of a heated glass strip on an unheated mandrel is studied experimentally. The effect of the thickness of the parts on the maximum radial residual stresses is considered. A method is proposed for regulating the residual stresses in parts with very thick walls.Translated from Mekhanika Polimerov, No. 1, pp. 75–80, January–February, 1972.     

Calculation of the residual stresses in wound glass-reinforced plastic parts when the material characteristics vary over the thickness

The thermoelastic residual stresses in anisotropic rings and cylinders with characteristics that vary over the thickness are determined. The calculation of the stresses in wound glass-reinforced plastic parts is illustrated by examples.Institute of Polymer Mechanics, Academy of Sciences of the Latvian SSR, Riga, Moscow Power Engineering Institute. Translated from Mekhanika Polimerov, No. 4, pp. 686–691, July–August, 1971.     

Structural stresses in composites reinforced with a system of anisotropic fibers

The effect of the anisotropy of the mechanical and thermophysical characteristics of the reinforcement on the temperature stresses in unidirectional composites has been investigated. The stresses near fibers forming a regular structure in the transverse plane are estimated as a function of the thermoelastic properties of the components and the structure parameters.Moscow Power Engineering Institute. Translated from Mekhanika Polimerov, No. 4, pp. 728–731, July–August, 1974.     

Study of the stresses associated with the hot orientation of certain carbon-chain fibers

The process of hot orientation of Khlorin, polyacrylonitrile, and polypropylene fibers is investigated; the stresses associated with this process are determined. The possibility of determining the actual temperature in the orientation zone is demonstrated. The effect of the mobility of the macromolecules on the stresses is considered.Tashkent Institute of the Textile Industry. Translated from Mekhanika Polimerov, No. 2, pp. 372–374, March–April, 1972.     

Residual stresses in plastic rings reinforced with glass and manufactured with consolidation of the various layers

The residual stresses in thin-wall plastic rings reinforced with glass and prepared by the method of consolidating the layers in combination with various winding regimes have been studied experimentally. It is shown that variation of the winding regime from one layer to another can change the distribution of the stresses through the thickness of the ring.Moscow Energy Institute. Translated from Mekhanika Polimerov, No. 1, pp. 174–176, January–February, 1972.     

Determination of the residual stresses in wound glass-reinforced plastic rings

The stresses that develop during winding in wound glass-reinforced plastic rings change during polymerization, when the modulus of elasticity in the radial direction is reduced by heating. Further changes occur in connection with cooling and removal from the mandrel. The theoretical relations obtained for determining these stresses are found to be confirmed by experiment.Bauman Moscow Higher Technical College. Translated from Mekhanika Polimerov, No. 5, pp. 892–898, September–October, 1969.     

Effect of the conditions of formation of glued joints on their thermophysical properties

A correlation has been experimentally established between the thermal resistance of adhesive films and the internal stresses that develop during the curing process. During cure the thermal resistance varies in parallel with the internal stresses. It is assumed that the development of thermal resistance is determined by the tension produced in the film by the development of the internal stresses.Voronezh Forest Engineering Institute. Translated from Mekhanika Polimerov, No. 4, pp. 754–756, July–August, 1973.     

Variant of the variable-modulus theory of elasticity

A variant of the variable-modulus theory — a generalization of the ideas of the classical theory of elasticity in which the observed difference in the moduli of elasticity in uniaxial tension and compression and homogeneous shear is taken into account — is considered. Quasilinear expressions are proposed for the stresses in terms of the strains and the strains in terms of the stresses.Tula Polytechnic Institute. Translated from Mekhanika Polimerov, Vol. 5, No. 2, pp. 363–365, March–April, 1969.     

Residual stress distribution in different types of adhesion joints

The results of a photoelastic investigation of the distributions of shrinkage and temperature residual stresses in glued joints and coatings are compared. The degree of nonuniformity of the residual stress distribution over the length and thickness is determined as a function of the scale factor. It is shown that the bulk of the residual stresses in metal joints glued with K-115 epoxy adhesive are temperature stresses, which may reach 130 kgf/cm². The shrinkage and temperature residual stress distributions are similar in character.Kucherenko Central Scientific-Research Institute of Building Structures. Translated from Mekhanika Polimerov, No. 4, pp. 738–742, July–August, 1971.     

Theory of the biomechanism of fractures of the diaphysis of long tubular bones

A new theoretical basis is proposed for the biomechanism of fractures of the diaphysis of long tubular bones resulting from bending deformation. Bone damage is shown to result from the concentration of maximum tensile stresses on the tension side and shear stresses in the compression zone. The origin of fan-shaped cracks and oblique fractures, occurring individually or in combination, is explained in these terms.Altai State Medical Institute. Translated from Mekhanika Polimerov, No. 2, pp. 318–322, March–April, 1971.