Demonstration of the Heterolytic OO Bond Cleavage of Putative Nonheme Iron(II)OOH(R) Complexes for Fenton and Enzymatic Reactions

One‐electron reduction of mononuclear nonheme iron(III) hydroperoxo (Fe^III? OOH) and iron(III) alkylperoxo (Fe^III? OOR) complexes by ferrocene (Fc) derivatives resulted in the formation of the corresponding iron(IV) oxo complexes. The conversion rates were dependent on the concentration and oxidation potentials of the electron donors, thus indicating that the reduction of the iron(III) (hydro/alkyl)peroxo complexes to their one‐electron reduced iron(II) (hydro/alkyl)peroxo species is the rate‐determining step, followed by the heterolytic O? O bond cleavage of the putative iron(II) (hydro/alkyl)peroxo species to give the iron(IV) oxo complexes. Product analysis supported the heterolytic O? O bond‐cleavage mechanism. The present results provide the first example showing the one‐electron reduction of iron(III) (hydro/alkyl)peroxo complexes and the heterolytic O? O bond cleavage of iron(II) (hydro/alkyl)peroxo species to form iron(IV) oxo intermediates which occur in nonheme iron enzymatic and Fenton reactions.     

Preparation and characterization of a microcrystalline non-heme FeIII(OOH) complex powder: EPR reinvestigation of FeIII(OOH) complexes-improvement of the perturbation equations for the g tensor of low-spin FeIII

The first example of a microcrystalline powder of a synthetic low-spin (LS) mononuclear Fe(III)(OOH) intermediate has been obtained by the precipitation of the [Fe(III)(L(5) (2))(OOH)](2+) complex at low temperature. The high purity of this thermally unstable powder is revealed by magnetic susceptibility measurements. EPR studies on this complex, in the solid state and also in frozen solution, are reported and reveal the coexistence of two related Fe(III)(OOH) species in both states. We also present a theoretical analysis of the g tensor for LS Fe(III) complexes, based on new perturbation equations. These simple equations provide distortion-energy parameters that are in good agreement with those obtained by a full-diagonalization calculation.     

How Ligand Geometry Affects the Reactivity of Co(II) Cyclam Complexes

Cobalt complexes are extensively studied as bioinspired models for non-heme oxygenases as they facilitate both the stabilization and characterization of metal-oxygen intermediates. As an analog to the well-known Co(cyclam) complex Co{N₄} (cyclam=1,4,8,11-tetraazacyclotetradecane), the Co^II complex Co{i-N₄} with the isomeric isocyclam ligand (isocyclam=1,4,7,11-tetraazacyclotetradecane) was synthesized and characterized. Despite the identical N₄ donor set of both complexes, Co{i-N₄} enables the 2e⁻/2H⁺ reduction of O₂ with a lower overpotential (η_eff of 385 mV vs. 540 mV for Co{N₄} ), albeit with a diminished turnover frequency. Characterization of the intermediates formed upon O₂ activation of Co{i-N₄} reveals a structurally identified stable μ-peroxo Co^III dimer as the main product. A superoxo Co^III species is also formed as a minor product, as indicated by EPR spectroscopy. In further reactivity studies, the electrophilicity of these in situ generated Co−O₂ species was demonstrated by the oxidation of the O−H bond of TEMPO−H (2,2,6,6-tetramethylpiperidin-1-ol) via a H atom abstraction process. Unlike the known Co(cyclam), Co{i-N₄} can be employed in oxygen atom transfer reactions oxidizing triphenylphosphine to the corresponding phosphine oxide highlighting the impact of geometrical modifications of the ligand while preserving the ring size and donor atom set on the reactivity of biomimetic oxygen activating complexes.     

Characterization and Reactivity of a Tetrahedral Copper(II) Alkylperoxido Complex

A tetrahedral Cu^II alkylperoxido complex [Cu^II(TMG₃tach)(OOCm)]⁺ ( 1^OOCm ) (TMG₃tach={2,2′,2′′-[(1s,3s,5s)-cyclohexane-1,3,5-triyl]tris-(1,1,3,3-tetramethyl guanidine)}, OOCm=cumyl peroxide) is prepared and characterized by UV/Vis, cold-spray ionization mass spectroscopy (CSI-MS), resonance Raman, and EPR spectroscopic methods. Product analysis of the self-decomposition reaction of 1^OOCm in acetonitrile (MeCN) indicates that the reaction involves O−O bond homolytic cleavage of the peroxide moiety with concomitant C−H bond activation of the solvent molecule. When an external substrate such as 1,4-cyclohexadiene (CHD) is added, the O−O bond homolysis leads to C−H activation of the substrate. Furthermore, the reaction of 1^OOCm with 2,6-di-tert-butylphenol derivatives produces the corresponding phenoxyl radical species (ArO^.) together with a Cu^I complex through a concerted proton-electron transfer (CPET) mechanism. Details of the reaction mechanisms are explored by DFT calculations.     

Pathways of the Extremely Reactive Iron(IV)-oxido complexes with Tetradentate Bispidine Ligands

The nonheme iron(IV)-oxido complex trans-N3-[(L¹)Fe^IV=O(Cl)]⁺, where L¹ is a derivative of the tetradentate bispidine 2,4-di(pyridine-2-yl)-3,7-diazabicyclo[3.3.1]nonane-1-one, is known to have an S=1 electronic ground state and to be an extremely reactive oxidant for oxygen atom transfer (OAT) and hydrogen atom abstraction (HAA) processes. Here we show that, in spite of this ferryl oxidant having the “wrong” spin ground state, it is the most reactive nonheme iron model system known so far and of a similar order of reactivity as nonheme iron enzymes (C−H abstraction of cyclohexane, −90 °C (propionitrile), t_1/2=3.5 sec). Discussed are spectroscopic and kinetic data, supported by a DFT-based theoretical analysis, which indicate that substrate oxidation is significantly faster than self-decay processes due to an intramolecular demethylation pathway and formation of an oxido-bridged diiron(III) intermediate. It is also shown that the iron(III)-chlorido-hydroxido/cyclohexyl radical intermediate, resulting from C−H abstraction, selectively produces chlorocyclohexane in a rebound process. However, the life-time of the intermediate is so long that other reaction channels (known as cage escape) become important, and much of the C−H abstraction therefore is unproductive. In bulk reactions at ambient temperature and at longer time scales, there is formation of significant amounts of oxidation product – selectively of chlorocyclohexane – and it is shown that this originates from oxidation of the oxido-bridged diiron(III) resting state.     

Water as an Oxygen Source in the Generation of Mononuclear Nonheme Iron(IV) Oxo Complexes

Give me an “O”! Mononuclear nonheme iron(IV) oxo complexes have been generated using water as an oxygen source and cerium(IV) as an oxidant. The high‐yield oxygenation of organic substrates in this system (see picture, Fe green, O red, N blue, C gray) is catalyzed by iron(II) complexes. The source of oxygen in the iron(IV) oxo complexes and the oxygenated products has been assigned unambiguously by isotopic labeling experiments.

     

Biomimetic Interaction between FeII and O2: Effect of the Second Coordination Sphere on O2 Binding to FeII Complexes: Evidence of Coordination at the Metal Centre by a Dissociative Mechanism in the Formation of μ‐Oxo Diferric Complexes

We report that the formation of μ‐oxo diferric compounds from O₂ and FeCl₂ complexes within the tris(2‐pyridylmethyl)amine series (N. K. Thallaj et al. Chem. Eur. J., 2008 , 14, 6742–6753) involves coordination of O₂ to the metal centre and that this reaction occurs following initial dissociation of the bound equatorial chloride anion. We also report evidence of the formation of a reduced form of dioxygen by an inner‐sphere mechanism, thus leading to modification of the ligand. The solid‐state structures of [FeCl₂L] complexes (L¹=mono(α‐pivalamidopyridylmethyl)bis(2‐pyridylmethyl)amine, L²=mono(α‐pivalesteropyridylmethyl)bis(2‐pyridylmethyl)amine, L³=bis(α‐pivalamidopyridylmethyl)mono(2‐pyridylmethyl)amine are described, and spectroscopic data support the structural retention in solution. In [FeCl₂L³], the two amide hydrogen atoms stabilise the equatorial chloride anion in such a way that its exchange by a weak ligand is impossible: [FeCl₂L³] is perfectly oxygen‐stable. In [FeCl₂L²], the equatorial chloride anion is completely free to move and coordination of O₂ can take place. The reaction product with [FeCl₂L²] is a μ‐oxo diferric complex in which the ester function has been transformed into a phenol group. This conversion can be seen as a hydrolysis reaction in basic medium, hence supporting the initial formation of a reduced form of dioxygen in the medium. Complex [FeCl₂L¹] exhibits a very weak reactivity with O₂, in line with a semistabilised equatorial chloride counteranion.     

Mononuclear Nonheme High‐Spin (S=2) versus Intermediate‐Spin (S=1) Iron(IV)–Oxo Complexes in Oxidation Reactions

Mononuclear nonheme high‐spin (S=2) iron(IV)–oxo species have been identified as the key intermediates responsible for the C?H bond activation of organic substrates in nonheme iron enzymatic reactions. Herein we report that the C?H bond activation of hydrocarbons by a synthetic mononuclear nonheme high‐spin (S=2) iron(IV)–oxo complex occurs through an oxygen non‐rebound mechanism, as previously demonstrated in the C?H bond activation by nonheme intermediate (S=1) iron(IV)–oxo complexes. We also report that C?H bond activation is preferred over C=C epoxidation in the oxidation of cyclohexene by the nonheme high‐spin (HS) and intermediate‐spin (IS) iron(IV)–oxo complexes, whereas the C=C double bond epoxidation becomes a preferred pathway in the oxidation of deuterated cyclohexene by the nonheme HS and IS iron(IV)–oxo complexes. In the epoxidation of styrene derivatives, the HS and IS iron(IV) oxo complexes are found to have similar electrophilic characters.     

Kinetic and Product Study of the S-oxidation vs HAT Chemoselectivity in Reactions Promoted by Nonheme Iron(IV)-oxo Complex/NHPI Mediator System

The chemoselectivity between S-oxidation and hydrogen atom transfer (HAT) from C−H bonds has been investigated in the oxidations of a series of aryl sulfides, alkyl aromatic compounds and benzylic alcohols promoted by the iron(IV)-oxo complex [(N4Py)Fe^IV(O)]²⁺ (N4Py: N,N-bis(2-pyridylmethyl)-N-bis(2-pyridyl)-methylamine) either alone or in the presence of the N-hydroxyphthalimide (NHPI) mediator via kinetic and product studies. Kinetic analyses indicate a generally higher reactivity of [(N4Py)Fe^IV(O)]²⁺ for S-oxidation process while HAT is favored in the reactions promoted by phthalimide-N-oxyl radical (PINO) deriving from NHPI oxidation. Product analysis in intermolecular competitive oxidations confirms the kinetic results with sulfoxides obtained as major products in the oxidation promoted by [(N4Py)Fe^IV(O)]²⁺. Conversely, when NHPI is employed as a mediator, significant differences in terms of chemoselectivity are observed, and HAT-derived products are obtained in higher yields which translate into an inversion of selectivity in the case of the substrates containing activated C−H bonds like diphenylmethane, triphenylmethane and benzylic alcohols. A similar change of chemoselectivity is also observed in the oxidation of aromatic substrates containing both a sulfur atom and α to OH benzylic C−H bonds, with the sulfoxide product more abundant in the absence of NHPI and carbonyl products prevailing with the [(N4Py)Fe^IV(O)]²⁺/NHPI system.     

Mononuclear Nonheme Iron(III)‐Iodosylarene and High‐Valent Iron‐Oxo Complexes in Olefin Epoxidation Reactions

High‐spin iron(III)‐iodosylarene complexes are highly reactive in the epoxidation of olefins, in which epoxides are formed as the major products with high stereospecificity and enantioselectivity. The reactivity of the iron(III)‐iodosylarene intermediates is much greater than that of the corresponding iron(IV)‐oxo complex in these reactions. The iron(III)‐iodosylarene species—not high‐valent iron(IV)‐oxo and iron(V)‐oxo species—are also shown to be the active oxidants in catalytic olefin epoxidation reactions. The present results are discussed in light of the long‐standing controversy on the one oxidant versus multiple oxidants hypothesis in oxidation reactions.     

Mechanistic Insight into the Nitric Oxide Dioxygenation Reaction of Nonheme Iron(III)–Superoxo and Manganese(IV)–Peroxo Complexes

Reactions of nonheme Fe^III–superoxo and Mn^IV–peroxo complexes bearing a common tetraamido macrocyclic ligand (TAML), namely [(TAML)Fe^III(O₂)]^2? and [(TAML)Mn^IV(O₂)]^2?, with nitric oxide (NO) afford the Fe^III–NO₃ complex [(TAML)Fe^III(NO₃)]^2? and the Mn^V–oxo complex [(TAML)Mn^V(O)]^? plus NO₂^?, respectively. Mechanistic studies, including density functional theory (DFT) calculations, reveal that M^III–peroxynitrite (M=Fe and Mn) species, generated in the reactions of [(TAML)Fe^III(O₂)]^2? and [(TAML)Mn^IV(O₂)]^2? with NO, are converted into M^IV(O) and ^.NO₂ species through O?O bond homolysis of the peroxynitrite ligand. Then, a rebound of Fe^IV(O) with ^.NO₂ affords [(TAML)Fe^III(NO₃)]^2?, whereas electron transfer from Mn^IV(O) to ^.NO₂ yields [(TAML)Mn^V(O)]^? plus NO₂^?.     

Bioinspired Trispyrazolylborato Nickel(II) Flavonolate Complexes and Their Reactivity Toward Dioxygen

Aiming at structural and functional mimics of the active site of the Ni^II containing quercetin‐2,4‐dioxygenase Ni^II flavonolate complexes Tp*NiX [Tp* = hydrotris(3,5‐dimethyl)pyrazolylborate, X = 3‐hydroxy flavonolate (Fla), 3‐hydroxy thioflavonolate (SFla), 3‐hydroxy selenoflavonolate (SeFla)] were synthesized and characterized by spectroscopic methods and X‐ray crystallography. The complex Tp*NiFla reacts with O₂ via dioxygenation of bound flavonolate to benzoic acid and salicylic acid as one should expect for a functional model of the enzyme. Modification of the carbonyl function of the flavonolate to the corresponding C=S and C=Se compounds retained dioxygenase like reactivity, but did not lead to an increase of reaction rate as had been anticipated due to a weaker interaction of S/Se with the central nickel atom.     

Axial Ligand and Spin‐State Influence on the Formation and Reactivity of Hydroperoxo–Iron(III) Porphyrin Complexes

The present study focuses on the formation and reactivity of hydroperoxo–iron(III) porphyrin complexes formed in the [Fe^III(tpfpp)X]/H₂O₂/HOO^? system (TPFPP=5,10,15,20‐tetrakis(pentafluorophenyl)‐21H,23H‐porphyrin; X=Cl^? or CF₃SO₃^?) in acetonitrile under basic conditions at ?15 °C. Depending on the selected reaction conditions and the active form of the catalyst, the formation of high‐spin [Fe^III(tpfpp)(OOH)] and low‐spin [Fe^III(tpfpp)(OH)(OOH)] could be observed with the application of a low‐temperature rapid‐scan UV/Vis spectroscopic technique. Axial ligation and the spin state of the iron(III) center control the mode of O? O bond cleavage in the corresponding hydroperoxo porphyrin species. A mechanistic changeover from homo‐ to heterolytic O? O bond cleavage is observed for high‐ [Fe^III(tpfpp)(OOH)] and low‐spin [Fe^III(tpfpp)(OH)(OOH)] complexes, respectively. In contrast to other iron(III) hydroperoxo complexes with electron‐rich porphyrin ligands, electron‐deficient [Fe^III(tpfpp)(OH)(OOH)] was stable under relatively mild conditions and could therefore be investigated directly in the oxygenation reactions of selected organic substrates. The very low reactivity of [Fe^III(tpfpp)(OH)(OOH)] towards organic substrates implied that the ferric hydroperoxo intermediate must be a very sluggish oxidant compared with the iron(IV)–oxo porphyrin π‐cation radical intermediate in the catalytic oxygenation reactions of cytochrome P450.     

Nonheme Iron Mediated Oxidation of Light Alkanes with Oxone: Characterization of Reactive Oxoiron(IV) Ligand Cation Radical Intermediates by Spectroscopic Studies and DFT Calculations

The oxidation of light alkanes that is catalyzed by heme and nonheme iron enzymes is widely proposed to involve highly reactive {Fe^V?O} species or {Fe^IV?O} ligand cation radicals. The identification of these high‐valent iron species and the development of an iron‐catalyzed oxidation of light alkanes under mild conditions are of vital importance. Herein, a combination of tridentate and bidentate ligands was used for the generation of highly reactive nonheme {Fe?O} species. A method that employs [Fe^III(Me₃tacn)(Cl‐acac)Cl]⁺ as a catalyst in the presence of oxone was developed for the oxidation of hydrocarbons, including cyclohexane, propane, and ethane (Me₃tacn=1,4,7‐trimethyl‐1,4,7‐triazacyclononane; Cl‐acac=3‐chloro‐acetylacetonate). The complex [Fe^III(Tp)₂]⁺ and oxone enabled stoichiometric oxidation of propane and ethane. ESI‐MS, EPR and UV/Vis spectroscopy, ¹⁸O labeling experiments, and DFT studies point to [Fe^IV(Me₃tacn)({Cl‐acac}^.+)(O)]²⁺ as the catalytically active species.     

Formation and High Reactivity of the anti‐Dioxo Form of High‐Spin μ‐Oxodioxodiiron(IV) as the Active Species That Cleaves Strong C−H Bonds

Recently, it was shown that μ‐oxo‐μ‐peroxodiiron(III) is converted to high‐spin μ‐oxodioxodiiron(IV) through O?O bond scission. Herein, the formation and high reactivity of the anti‐dioxo form of high‐spin μ‐oxodioxodiiron(IV) as the active oxidant are demonstrated on the basis of resonance Raman and electronic‐absorption spectral changes, detailed kinetic studies, DFT calculations, activation parameters, kinetic isotope effects (KIE), and catalytic oxidation of alkanes. Decay of μ‐oxodioxodiiron(IV) was greatly accelerated on addition of substrate. The reactivity order of substrates is toluene<ethylbenzene≈cumene<trans‐β‐methylstyrene. The rate constants increased proportionally to the substrate concentration at low substrate concentration. At high substrate concentration, however, the rate constants converge to the same value regardless of the kind of substrate. This is explained by a two‐step mechanism in which anti‐μ‐oxodioxodiiron(IV) is formed by syn‐to‐anti transformation of the syn‐dioxo form and reacts with substrates as the oxidant. The anti‐dioxo form is 620 times more reactive in the C?H bond cleavage of ethylbenzene than the most reactive diiron system reported so far. The KIE for the reaction with toluene/[D₈]toluene is 95 at ?30 °C, which the largest in diiron systems reported so far. The present diiron complex efficiently catalyzes the oxidation of various alkanes with H₂O₂.     

Enhancing Tris(pyrazolyl)borate-Based Models of Cysteine/Cysteamine Dioxygenases through Steric Effects: Increased Reactivities,Full Product Characterization and Hints to Initial Superoxide Formation

The design of biomimetic model complexes for the cysteine dioxygenase (CDO) and cysteamine dioxygenase (ADO) is reported, where the 3-His coordination of the iron ion is simulated by three pyrazole donors of a trispyrazolyl borate ligand (Tp) and protected cysteine and cysteamine represent substrate ligands. It is found that the replacement of phenyl groups—attached at the 3-positions of the pyrazole units in a previous model—by mesityl residues has massive consequences, as the latter arrange to a more spacious reaction pocket. Thus, the reaction with O₂ proceeds much faster and afterwards the first structural characterization of an iron(II) η²-O,O-sulfinate product became possible. If one of the three Tp-mesityl groups is placed in the 5-position, an even larger reaction pocket results, which leads to yet faster rates and accumulation of a reaction intermediate at low temperatures, as shown by UV/Vis and Mössbauer spectroscopy. After comparison with the results of investigations on the cobalt analogues this intermediate is tentatively assigned to an iron(III) superoxide species.     

Dioxygen Reduction in Acetonitrile with Copper Pyridylalkylamine Complexes: The Influence of Acid Strength on the Catalytic Performance

The pyridylalkylamine copper complex [Cu(tmpa)(L)]²⁺ has previously been proposed to reduce dioxygen via a dinuclear resting state, based on experiments in organic aprotic solvents using chemical reductants. Conversely, a mononuclear reaction mechanism was observed under electrochemical conditions in a neutral aqueous solution. We have investigated the electrochemical oxygen and hydrogen peroxide reduction reaction catalyzed by [Cu(tmpa)(L)]²⁺ in acetonitrile, using several different acids over a range of pK_a. We demonstrate that strong acids lead to the loss of redox reversibility and to the destabilization of the copper complex under non-catalytic conditions. Under milder conditions, the electrochemical oxygen reduction reaction (ORR) was shown to proceed via a mononuclear catalytic intermediate, similar to what we have previously observed in water. However, in acetonitrile the catalytic rate constants of the ORR are dramatically lower by a factor 10⁵, which is caused by the unfavorable equilibrium of formation of [Cu^II(O₂⋅⁻)(tmpa)]⁺ in acetonitrile. This results in higher catalytic rates for the reduction of hydrogen peroxide than for the ORR.