Synthesis and magnetic properties of μ-oxalato-bridged Cu2 IIFeIII-type heterotrinuclear complexes

Three new -oxalato-bridged heterotrinuclear copper(II)–iron(III)–copper(II) complexes have been synthesized and identified: [Cu₂Fe(ox)₃L₂]ClO₄ [L = 5-nitro-1,10-phenanthroline (NO₂phen); 2,9-dimethyl-1,10-phenanthroline (Me₂phen) or 2,2-bipyridine (bpy), respectively]; ox = the oxalato dianions. Based on elemental analyses, molar conductivity and magnetic moment (at room-temperature) measurements, i.r. and electronic spectral studies, extended ox-bridged structures consisting of two copper(II) and an iron(III) ions, in which the central iron(III) ion has an octahedral environment and the end-capped two copper(II) ions a square-planar environment, are proposed for these complexes. The [Cu₂Fe(ox)₃(Me₂phen)₂]ClO₄ (1) and [Cu₂Fe(ox)₃(bpy)₂]ClO₄ (2) complexes were characterized further by variable-temperature magnetic susceptibility (4.2–300 K) measurements and the observed data were simulated by the equation based on the spin Hamiltonian operator, = –2J₁ · ₂, giving the exchange integrals J = –12.85 cm^–1 for (1) and J = –11.28 cm^–1 for (2). The results indicate the presence of an antiferromagnetic spin-exchange interaction between the copper(II) and iron(III) ions through the oxalato-bridge in both complexes (1) and (2).     

Heterobinuclear and heterotrinuclear transition-metal μ-allenyl complexes

Binuclear and trinuclear transition-metal -allenyl complexes—especially mixedmetal complexes—are reviewed. In recent years, a number of such compounds have been prepared by use of several synthetic methods. The most general of these methods, viz. reactions of metal propargyls and of the lower nuclearity metal allenyls with low-valent metal complexes such as metal carbonyls and platinum(0) compounds, are considered in some detail. The structures of the binuclear metal -¹,²- and -³,²-allenyl complexes and of the trinuclear metal ₃-¹,²,²-allenyl complexes—both triangular and open—are presented and compared. Trends in the¹H and¹³C NMR spectroscopic properties of these compounds are examined. Some aspects of reaction chemistry of the heteronuclear platinum-ruthenium -¹,²-allenyl complexes are presented.     

Syntheses,Structures and Vitro Anticancer Activities of μ_2-O-and μ_2-Dimethylglyoximato-bridged μ_3-O-Tris[di(m-fluorobenzyl)tin] Bis(dimethylglyoximate)

μ_2-O-and μ_2-dimethylglyoximato-bridged μ_3-O-tris[di(m-fluorobenzyl)tin] bis(dimethylglyoximate)(1) has been synthesized by the reaction of di(m-fluorobenzyl)tin dichloride with dimethylglyoxime. Complex 1 was characterized by means of IR,~1H NMR,elemental analysis and X-ray diffraction. It crystallizes in orthorhombic system,space group Pna21 with a = 2.22172(12),b = 1.05566(6),c = 2.15577(12) nm,V = 5.0561(5) nm~3,Z = 4,C_(50)H_(50)F_6N_4O_6Sn_3,Mr = 1273.01,Dc = 1. 6721 g/cm3,μ_(MoΚα) = 15.44 cm~(-1),F(000) = 2520,R = 0.0281 and wR = 0.0683. The stabilities,orbital energies and composition characteristics of some frontier molecular orbitals of 1 have been investigated with the quantum chemistry calculation. The properties of thermogravimetric and vitro anticancer activities of the compound have been discussed.     

Some practical comparisons of the efficiency and overloading behaviour of sub-2 μm porous and sub-3 μm shell particles in reversed-phase liquid chromatography

At their optimum flow, sub-3 μm superficially porous or "shell" particles demonstrate similar efficiency to sub-2 μm totally porous particles. The performance of 0.21 cm i.d shell columns is however inferior to those of 0.46 cm i.d., presumably due to packing difficulties. At high flow, shell columns can give flatter Knox curves due to lower operating pressure (half or less of that of the totally porous particles) producing less frictional heating, which combined with the increased thermal conductivity of their non-porous core, gives more efficient heat dissipation. However, the effects of frictional heating for sub-2 μm columns are considerably exaggerated when using pure ACN as mobile phase, as it has a thermal conductivity 3 times less than that of pure water, leading to poorer heat dissipation. Overloading is already problematic for ionised solutes, a group which contains many pharmaceuticals and compounds of clinical relevance, on conventional columns (5 μm porous particles). However, it becomes a more serious issue for both new column types, partially as a result of their very high efficiency, which concentrates the sample as a very narrow band. The sample capacity of one type of shell particle was estimated to be 60% of that of the small totally porous particles, in line with the fraction of the particle volume that is porous. Due to overloading, it is barely possible to achieve perfect peak symmetry for ionised acids or bases with either of these new column types, even by injecting the lowest amounts of sample detectable by UV. While ammonium formate and potassium phosphate buffers gave similar results in overloading studies, use of formic acid as sole mobile phase additive is not recommended for these solutes, as its ionic strength is too low, leading to a catastrophic deterioration in efficiency when sample concentrations of even a few mg/L are injected.     

Synthesis and magnetic interaction of μ-2-chloroterephthalato binuclear iron (Ⅱ) complexes

Four μ-2-chloroterephthalato binuclear iron(Ⅱ) complexes, namely [Fe2 (CTPHA) L4]-(ClO4)2, where L stands for 4,4'-dimethyl-2,2'-bipyridine (Me2-bpy); 2,9-dimethyl-l, 10-phenanthro-line (Me2-phen); 5-chloro-l, 10-phenanthroline (Cl-phen); 4, 7-diphenyl-l, 10-phenanthroline (Ph2-phen), respectively, and CTPHA represents 2-chlorolerephthalate dianion, have been synthesized and characterized. Based on the elemental analyses, molar conductance measurements and spectroscopic studies, extended CTPHA-bridged structures consisting of two iron(Ⅱ) ions, each in a distorted octahedral environment, are proposed for these complexes. [Fe2 CTPHA)-(Me2-bpy)4] (ClO2 (1) and [Fe2(CT-PHA)·(Me2-phen)4](ClO4)2 (2) complexes were characterized by variable temperature magnetic susceptibility (4-300 K) measurements and the observed data were successfully simulated by the equation based on the spin Hamiltonian operator, H = - 2JS1 · S2 , giving the exchange integrals J = - 1.28 cm-1 for 1 and J = - 1.85 cm-1 for 2. These r     

Metal—nitrogen stretching assignments in some metallophthalocyanines and μ-oxo-(Fephthalocyanine)2

Metal-isotope substitution has been employed to establish the absorptions in the i.r. spectra of some metallophthalocyanines that contain MN stretching motion. The primary MN stretching bands appear at 240.7 cm⁻¹ in ⁶⁴Znpc; 284.0 cm⁻¹ in ⁶³Cupc; 376.0 cm⁻¹ and 317.8 cm⁻¹ in ⁵⁸Nipc; and 308.4 cm⁻¹ in ⁵⁴Fepc. Assignment of the far-i.r. spectrum of u-oxo-(Fepc)₂ places the FeN stretching band at 280.2 cm⁻¹ and suggests a linear arrangement of the FeOFe with Fe atoms in the plane of the phthalocyanine ring.     

Oxidation and coupling of β-diketiminate ligand in lanthanide complexes: novel eight-nuclear lanthanide clusters with μ-, μ3-Cl, and μ4-O bridge

Two novel eight-nuclear lanthanide oxide and chloride clusters Ln(8)(μ-η(2)-L(4))(2)(μ(3)-Cl)(4)(μ-Cl)(10)(μ(4)-O)(3)(THF)(8) (Ln = Er(3), Dy(4); L(4) = [OC{(Me)CN-2,6-(i)PrC(6)H(3)}(2)](2-)) have been synthesized by the reaction of β-diketiminate rare-earth metal chlorides with oxygen, providing a new oxidation and coupling reaction of the β-diketiminate ligand.     

Synthesis, structure, and solution properties of [(mim-TASN)FeCl2]+ and its μ-oxo derivative

A series of iron(III) complexes based on the tetradentate ligand 4-((1-methyl-1H-imidazol-2-yl)methyl)-1-thia-4,7-diazacyclononane (L) has been synthesized, and their solution properties investigated. Addition of FeCl(3) to methanol solutions of L yields [LFeCl(2)]FeCl(4) as a dark red solid. X-ray crystallographic analysis reveals a pseudo-octahedral environment around iron(III) with the three nitrogen donors of L coordinated facially. Ion exchange reactions with NaPF(6) in methanol facilitate chloride exchange resulting in a different diastereomer for the [LFeCl(2)](+) cation. X-ray analysis of [LFeCl(2)]PF(6) finds meridional coordination of the three nitrogen donors of L. Electrochemical studies of [LFeCl(2)](+) in acetonitrile display a single Fe(III)/(II) reduction potential at -280 mV versus ferrocenium/ferrocene. In methanol, a broad cathodic wave is observed because of partial exchange of one chloride for methoxide with half-potentials of -170 mV and -440 mV for [LFeCl(2)](+/0) and [LFeCl(OCH(3))](+/0), respectively. The equilibrium constants for chloride exchange are 7 × 10(-4) M(-1) for Fe(III) and 2 × 10(-8) M(-1) for Fe(II). In aqueous solutions chloride exchange yields three accessible complexes as a function of pH. Strongly acidic conditions yield the aqua complex [LFeCl(OH(2))](2+) with a measured pK(a) of 3.8 ± 0.1. Under mildly acidic conditions, the μ-OH complex [(LFeCl)(2)(OH)](3+) with a pK(a) of 6.1 ± 0.3 is obtained. The μ-oxo complex [(LFeCl)(2)(O)](2+) is favored under basic conditions. The diiron Fe(III)/Fe(III) complexes [(LFeCl)(2)(OH)](3+) and [(LFeCl)(2)(O)](2+) can be reduced by one electron to the mixed valence Fe(III)/Fe(II) derivatives at -170 mV and -390 mV, respectively. From pH dependent voltammetric studies, the pK(a) of the mixed valent μ-OH complex [(LFeCl)(2)(OH)](2+) is calculated at 10.3.     

Expansion Reaction of μ-FcCCHCo_2(CO)_6 with Benzylideneacetonetricarbonyliron, and Molecular Structure of μ_3-FcCHCFeCo_2(CO)_9

Alkyne-andvinylidene-bridgedclusters0fgeneraltype(p3-L)FeCo2(C0)9havebeensh0wntobeimPortantprecursorsforthesynthesisofchiralskelet0nclusters.Thesecompoundscanbepreparedfromalkyne-bridgeddicobaltcomPlexesandmetalcarbonylssuchasFe2(CO)9orFe,(C0),,,"'buttheyieldswerepoorduetoeasydec0mP0siti0nofthestartingmaterialinreactionconditions.Moreover,inordertostudythecooperativeinteractionsaswellasinductive/mesomericeffectSbetweentheferr0ceneunitandtransitionmetalclusterframework,thep3-FcCHCFeCo2(…     

Synthesis and characterization of binuclear μ-oxo and μ-telluro molybdenum(V) complexes, [CpMo(O)(μ-Te)]2

Pyrolysis of an in-situ generated intermediate, produced in the reaction of [Cp^∗MoCl₄], 1, (Cp^∗ = η⁵-C₅Me₅) with [LiBH₄·THF], with an excess of difuryl ditelluride in toluene at 90 °C yielded syn and anti isomers of [Cp^∗Mo(O)(μ-Te)]₂ (2, 3) and [Cp^∗₂Mo₂O₂(μ-O)(μ-Te)] (4, 5). In a similar fashion, dibenzyl diselenide yielded syn and anti isomers of [Cp^∗Mo(O)(μ-Se)]₂ (6, 7), along with the known nido-[(Cp^∗Mo)₂B₄H₈Se₂]. Note that in parallel with 2-7, [(Cp^∗Mo)₂B₅H₉] was isolated as the major product in both cases. Compounds 2-7 have been isolated in modest yield as orange to brown crystalline solids. All the new compounds have been characterized in solution by mass, IR, ¹H, ¹³C, ⁷⁷Se and ¹²⁵Te NMR spectroscopy, and the structural types were unequivocally established by crystallographic analysis of 2-4 and 7.     

Hydrophilic interaction chromatography of seized drugs and related compounds with sub 2 μm particle columns

The use of hydrophilic interaction chromatography (HILIC) with sub 2 μm particle columns for the analysis of drugs and related compounds of forensic interest is described. This technique uses a high organic/low aqueous buffered mobile phase with a polar stationary phase, and is excellent for the separation of many of the charged solutes that are found in forensic drug exhibits. In this study, HILIC is investigated for 11 solutes of forensic interest, including weak bases, weak acids, and a neutral solute. In addition, for columns containing either ethylene bridged hybrid particles with or without an amide bonded phase, the effects of acetonitrile concentration, buffer type, buffer concentration, linear velocity, and sample concentration were studied. Based on these studies, HILIC with sub 2 μm particle columns can offer highly efficient, selective, and rapid isocratic separations of drugs and related compounds of forensic interest, with excellent peak shapes and low back pressures. This is in contrast to reverse phase chromatography (RPLC), where gradient elution is usually required, which can result in extensive overlap between acidic, neutral, and basic solutes. In addition, since HILIC exhibits a much greater loading capacity than RPLC, it could be a preferred technique for drug profiling. Furthermore, because high organic content mobile phases are highly amenable to mass spectrometric detection, the use of HILIC with tandem mass spectrometric detection for the analysis of seized drugs is described.     

Analysis of peptides and proteins using sub-2 μm fully porous and sub 3-μm shell particles

The objective of this study was to evaluate the potential of sub-2 μm totally porous particles and sub-3 μm shell particles for peptide and protein analysis. Specific analytical strategies must be developed for these biomolecules as their importance in the pharmaceutical industry increases and as their structural complexity involves some issues when classical LC conditions are employed. Attention was paid on comparing these different columns in various LC conditions (different temperatures, gradient times, and mobile phase flow rates). The comparison of the different supports was assessed considering columns characteristics (quality of packing, silanol activity, pore size, totally porous or shell particles). In this article, peptides were first analyzed with both column technologies. Similar results to those achieved with low molecular weight compounds were obtained (peak capacity >100 for t_grad around 3 min and columns dimensions of 2.1 mm id × 50 mm), but specific conditions were required (elevated temperature and the use of a volatile ion-pairing reagent, namely TFA). For peptide analysis following tryptic digestion, the goal was to improve peak capacity and resolution because of the large number of generated peptides. For this purpose, longer columns packed with porous sub-2 μm or shell sub-3 μm particles (i.e., 150 mm) and gradient times (i.e., up to 30 min) were tested. On the other hand, proteins in their intact forms have higher molecular weights (MW > 5000 Da) and a tertiary structure, thus requiring different conditions in terms of stationary phase hydrophobicity (C₄vs. C₁₈) and pore size (300 vs. 120 Å). In addition, there were issues with adsorption onto the LC system and/or the column itself. This study showed that proteins with MWs lower than 40,000 Da required chromatographic conditions close to those employed for peptide analysis. For larger proteins, a C₄ 300 Å stationary phase gave the best results, confirming theoretical predictions.     

Preparation and evaluation of tandem stationary phases for μ-HPLC and capillary electrochromatography

Tandem separation beddings were prepared within the capillary tube with a photopolymerized monolith initially formed by sol-gel technology in combination with microspheric octadecylsilane material by slurry packing. The chromatographic performance of the tandem stationary phases was evaluated in detail by varying the flow rate and the composition of the mobile phase using a self-installed capillary HPLC system. For the tandem stationary phases with a forepart monolithic length of 11 cm and 1 cm the lowest theoretical plate height for the retained component was 26 µm and 34 µm, respectively. After evaluation by capillary electrochromatography, enhanced chromatographic performance was obtained using a column with 1 cm monolithic inlet frit with a theoretical plate height up to 7.20 µm. A scanning electron micrograph with different cross-sections of the column showed that a porous network formed in the center of the capillary and a homogenous slurry packing of C₁₈ was obtained at the back part.     

Synthesis and Structure of μ-Peroxo-bis(4-bromophenoxotri-p-tolylantimony)

-Peroxo-bis(4-bromophenoxotri-p-tolylantimony) was synthesized by reacting 4-bromophenol with tri-p-tolylstibine in the presence of hydrogen peroxide. According to X-ray diffraction data, the Sb atoms have trigonal bipyramidal coordination. In the centrosymmetric molecule, the two Sb atoms are joined via bridging peroxo group disordered over two sites. The Sb–O(1,2') bond lengths are equal to 1.999(6) and 2.03(1) Å, the Sb···O(2,1') distances are equal to 2.605(9) and 2.626(5) Å, respectively. The lengths of the terminal Sb–O(3) bonds are 2.093(3) Å.     

Synthesis and x-ray structures of some homonuclear μ-alkylidenetungsten complexes

The complexes W₂{μ-CHCHC(CH₃)₂](CO)₁₀} and W₂{μ-CHCHC(CH₃)(CH₂)₃CH₃][(CO)₁₀} have been synthesized, and an X-ray diffraction study has revealed the presence of five CO groups on each metal center. The analogy between W₂{μ-CHCHC(CH₃)₂][(CO)₉]} anda complex of W(CO)₄ and a tungstabutadiene (CO)₅WCHCHC(CCH₃)₂ prompted the synthesis of the first heteroatom-substitued μ-alkylidene complexes of tungsten, starting from conjugated Fischer-typ carbene complexes (CO)₅WC(OR)CHCHR. The X-ray structure of the complex W₂{μ-C(OEt)CHCH(CH₃)][(CO)₉]} has also been determined. In the case of the simplest conjugated compelx (CO)₅WC(OR)CHCH₂, an interesting rearrangement initiated by addition of W(CO)₅ to the terminal CC double bond giving a dinuclear complex W(CO)₅[η²-CH₂CHC(OMe)W(CO)₅] in which the two metal centers are not directly linked, has been observed.     

Ein μ2-Benzylidenkomplex des Chroms mit ungepaarten Elektronen

The benzylidene-bridged dichromium complex [CpCr]₂(μ-Br)₂(μ-CHC₆H₅) (4) has been obtained by thermolysis of [CpCr(CH₂C₆H₅)]₂(μ-Br)₂. ¹H NMR spectroscopy shows that 4 is antiferromagnetic and a barrier of 64.0 kJ mol⁻¹ slows down the rotation of the phenyl group.     

Temperature dependence of the quadrupole splitting and μeff for [FeCl2(Dena)4]·DmgH2

Mössbauer spectrometry and magnetochemical methods have been applied to a complex known as catene: -dimethylglyoxime dichlorotetra(N,N-diethylnicotinamide) iron· (II) [FeCl₂(Dena)₄]·DmgH₂, where Dena is N,N,diethylnicotinamide and DmgH₂ is dimethylglyoxime. The compound has a high-spin state for the iron(II) (S=2). The magnetic susceptibility follows the Curie-Weiss law with a small value of , The E_Q=f(T) relation shows that the symmetry of the immediate environment of the iron is less than tetragonal: ₁=190 cm^–1, ₂=490 cm^–1.Translated from Teoreticheskaya i Éksperimental'naya Khimiya, No. 1, pp. 56–60, January–February 1992.     

Synthesis, characterization, and reactivity of a novel μ-η2:η2-diselenidodicopper(II) complex

The first μ-η(2):η(2)-diselenidodicopper(II) complex has been obtained in the reaction of a copper(I) complex with N,N',N″-tribenzyl-cis,cis-1,3,5-triaminocyclohexane and elemental selenium. The structure and reactivity of the complex is described.     

Synthesis,structure and reactions of μ-oxobis(arenesulfonatotriarylbismuth)

Hydrolysis of triarylbismuth bis(arenesulfonates) in acetone gives bismuth derivatives of the general formula [Ar₃Bi(OSO₂Ar)]₂O (Ar = Ph, p-Tol; Ar = Ph, C₆H₄Me-4, C₆H₃Me₂-2,4, C₆H₃Me₂-3,4). The structure of -oxobis[(3,4-dimethylbenzenesulfonato)triphenylbismuth] was established by means of X-ray diffraction. The molecule has a linear centrosymmetric structure with the bridging oxygen atom in the inversion center. The bismuth atom has a distorted trigonal bipyramidal coordination with the bridging oxygen atom and the arenesulfonate group in axial positions. The Bi-C and Bi-O_term distances are 2.200(2), 2.204(3), and 2.442(2) Å, and the Bi-O_br distances are 2.067(1) Å.Translated from Zhurnal Obshchei Khimii, Vol. 74, No. 9, 2004, pp. 1466–1471.Original Russian Text Copyright © 2004 by Sharutin, Egorova, Sharutina, Ivanenko, Pavlushkina, Gerasimenko, Pushilin.This revised version was published online in April 2005 with a corrected cover date.