A Pd@Zeolite Catalyst for Nitroarene Hydrogenation with High Product Selectivity by Sterically Controlled Adsorption in the Zeolite Micropores

The adsorption of molecules on metal nanoparticles can be sterically controlled through the use of zeolite crystals, which enhances the product selectivity in hydrogenations of reactants with more than one reducible group. Key to this success was the fixation of Pd nanoparticles inside Beta zeolite crystals to form a defined structure (Pd@Beta). In the hydrogenation of substituted nitroarenes with multiple reducible groups as a model reaction, the Pd@Beta catalyst exhibited superior selectivity for hydrogenation of the nitro group, outperforming both conventional Pd nanoparticles supported on zeolite crystals and a commercial Pd/C catalyst. The extraordinary selectivity of Pd@Beta was attributed to the sterically selective adsorption of the nitroarenes on the Pd nanoparticles controlled by the zeolite micropores, as elucidated by competitive adsorption and adsorbate displacement tests. Importantly, this strategy is general and was extended to the synthesis of selective Pt and Ru catalysts by fixation inside Beta and mordenite zeolites.     

Selective Oxidation of Methane into Methanol Under Mild Conditions

Selective oxidation of methane to methanol under mild conditions has been considered as a dream reaction but suffers from poor efficiency due to the strong C-H bond of methane and easy overoxidation of the methanol product. For overcoming these problems, a series of strategies has been developed for improving methanol productivity with oxidants of hydrogen peroxide and even a mixture of oxygen and hydrogen at mild temperatures. Significant achievements in these strategies using effective catalysts, such as supported metal nanoparticles, colloidal metal nanoparticles, and metal@zeolites are briefly concluded. Moreover, the current challenges, future perspectives for preparing active, selective, and stable catalysts, have been discussed. The zeolite fixed metal nanoparticle structure has been found to boost the reaction by benefiting the formation and enrichment of peroxide intermediates, which might guide the development of more efficient catalysts.     

Noble metal loaded zeolites for the catalytic oxidation of chlorinated hydrocarbons

Summary A series of metal loaded zeolite catalysts (Pd/H-ZSM-5, Pd/H-BETA, Pt/H-ZSM-5, and Pt/H-BETA) were investigated for their activity and selectivity during oxidation of different chlorinated hydrocarbons, namely dichloromethane and trichloroethylene, at constant gas space velocity (15,000 h^-1) and constant chlorohydrocarbon concentration (1,000 ppm in dry air). It was observed that the two noble metals played a major role in influencing the catalytic performance for complete oxidation of both chlorinated compounds. The acidic properties of the zeolite support in combination with increased oxygen activation owing to the noble metal were responsible for the high chlorocarbon destruction activity exhibited by this type of catalysts.     

Pt‐Pd Bimetallic Nanoparticles Decorated Nanoporous Graphene as a Catalytic Amplification Platform for Electrochemical Detection of Xanthine

The nanoporous graphene papers (NGPs) was prepared by the hard‐template method. The Pt−Pd modified NGPs hybrid was prepared by the self‐assembly method. Then a glassy carbon electrode (GCE) modified with Pt−Pd bimetallic nanoparticles‐functionalized nanoporous graphene composite has been prepared for the electrochemical determination of Xanthine (XA). The Pt−Pd/NGPs hybrid was characterized by transmission electron microscopy, scanning electron microscope and X‐ray diffraction. The electrochemical behavior of XA on Pt−Pd/NGPs/GCE was investigated by cyclic voltammetry and amperometric i‐t. The Pt−Pd/NGPs modified electrode exhibited remarkably electrocatalytic activity towards the oxidation reaction of XA in phosphate buffer solution (pH=5.5). Under the optimal conditions, the determination of XA was accomplished by using amperometric i‐t, the linear response range from 1.0×10⁻⁵∼1.2×10⁻⁴ M. The detection limit was 3.0×10⁻⁶ M (S/N=3). The proposed modified electrode showed good sensitivity, selectivity, and stability with applied to determine XA in human urine.     

A Highly Sensitive Nonenzymatic Glucose Sensor Based on Carbon Electrode Amplified with PdxCuy Catalyst

Approximately global Pd and Pd₉₄Cu₆ alloy nano catalysts of average diameter 10.5 and 5.9 nm respectively, have been synthesized hydrothermally by wet chemical reduction and co-reduction methods without addition of any capping agent. X-ray diffraction and various microscopic studies are used to characterize the crystal phase and the morphology of the catalysts. Non-enzymatic amperometric glucose sensors based on these synthesized catalyst materials are tested and compared in alkali at different potentials by cyclic voltammetry and chronoamperometry. The sensors characterized by fixed potential chronoamperometry are found to be sufficiently sensitive to glucose at different negative potentials like −0.65 V, −0.40 V, −0.10 V with respect to Hg/HgO electrode (E⁰≈0.1 V), where the reactions of glucose oxidation are different. The sensor constructed with Pd₉₄Cu₆ nanocatalyst shows an outstanding sensitivity of 10.1 mA cm⁻² mM⁻¹ which is considerably higher than that constructed with similarly synthesized Pd nanoparticles at any potential and that found in the literature of Pd based glucose sensors. The lower detection limit and response time obtained with Pd₉₄Cu₆ nanoparticles are 10 μM and 3 s respectively. These sensors also exhibit high specificity to glucose and significant anti-interference property against some common species like ascorbic acid (AA), uric acid (UA) and some monosaccharides whose interfering effects are found to decrease with decrease of potential of glucose oxidation. The electrocatalytic ability of the synthesized Pd and Pd₉₄Cu₆ nanoparticles toward glucose oxidation has also found promising in blood sample at different potentials.     

Palladium Encapsulated by an Oxygen-Saturated TiO2 Overlayer for Low-Temperature SO2-Tolerant Catalysis during CO Oxidation

The development of oxidation catalysts that are resistant to sulfur poisoning is crucial for extending the lifespan of catalysts in real-working conditions. Herein, we describe the design and synthesis of oxide-metal interaction (OMI) catalyst under oxidative atmospheres. By using organic coated TiO₂, an oxide/metal inverse catalyst with non-classical oxygen-saturated TiO₂ overlayers were obtained at relatively low temperature. These catalysts were found to incorporate ultra-small Pd metal and support particles with exceptional reactivity and stability for CO oxidation (under 21 vol % O₂ and 10 vol % H₂O). In particular, the core (Pd)-shell (TiO₂) structured OMI catalyst exhibited excellent resistance to SO₂ poisoning, yielding robust CO oxidation performance at 120 °C for 240 h (at 100 ppm SO₂ and 10 vol % H₂O). The stability of this new OMI catalyst was explained through density functional theory (DFT) calculations that interfacial oxygen atoms at Pd−O−Ti sites (of oxygen-saturated overlayers) serve as non-metal active sites for low-temperature CO oxidation, and change the SO₂ adsorption from metal(d)-to-SO₂(π*) back-bonding to much weaker σ(Ti−S) bonding.     

Understanding Alkaline Hydrogen Oxidation Reaction on PdNiRuIrRh High-Entropy-Alloy by Machine Learning Potential

High-entropy alloy (HEA) catalysts have been widely studied in electrocatalysis. However, identifying atomic structure of HEA with complex atomic arrangement is challenging, which seriously hinders the fundamental understanding of catalytic mechanism. Here, we report a HEA-PdNiRuIrRh catalyst with remarkable mass activity of 3.25 mA μg⁻¹ for alkaline hydrogen oxidation reaction (HOR), which is 8-fold enhancement compared to that of commercial Pt/C. Through machine learning potential-based Monte Carlo simulation, we reveal that the dominant Pd−Pd−Ni/Pd−Pd−Pd bonding environments and Ni/Ru oxophilic sites on HEA surface are beneficial to the optimized adsorption/desorption of *H and enhanced *OH adsorption, contributing to the excellent HOR activity and stability. This work provides significant insights into atomic structure and catalytic mechanism for HEA and offers novel prospects for developing advanced HOR electrocatalysts.     

The effect of Nafion ionomer on electroactivity of palladium–polypyrrole catalysts for oxygen reduction reaction

Present studies concentrated on the preparation, characterization, and electroactivity of palladium–polypyrrole (Pd/PPY) catalysts for oxygen reduction reaction. In particular, the effect of Nafion ionomer on their electroactivity was evaluated. In all catalysts prepared by “water-in-oil” microemulsion method, the Pd nanoparticles of ca. 7 nm in size appeared regardless of the Pd content (ranging from 2 to 20 wt.%). For comparison, carbon black-supported (Vulcan XC-72) catalyst (20 wt.% Pd) was also synthesized. Coating of the Pd/PPY samples with Nafion ionomer reduced their surface area and porosity. Chemical interaction due to Nafion acid functionalities affected the N-state of pyrrole as well as electron state of Pd in the Pd/PPY catalysts. As a result, the contribution of more oxidized palladium (Pd^δ+) increased. These interactions played an essential role in the electroactivity of Pd/PPY for oxygen reduction reaction. The increased amount of Nafion relative to that of PPY reduced limiting current density whereas the half-wave potential shifted to a more positive value and the fraction of hydrogen peroxide remarkably decreased.     

Co−Co Dinuclear Active Sites Dispersed on Zirconium-doped Heterostructured Co9S8/Co3O4 for High-current-density and Durable Acidic Oxygen Evolution

Developing cost-effective and sustainable acidic water oxidation catalysts requires significant advances in material design and in-depth mechanism understanding for proton exchange membrane water electrolysis. Herein, we developed a single atom regulatory strategy to construct Co−Co dinuclear active sites (DASs) catalysts that atomically dispersed zirconium doped Co₉S₈/Co₃O₄ heterostructure. The X-ray absorption fine structure elucidated the incorporation of Zr greatly facilitated the generation of Co−Co DASs layer with stretching of cobalt oxygen bond and S−Co−O heterogeneous grain boundaries interfaces, engineering attractive activity of significantly reduced overpotential of 75 mV at 10 mA cm⁻², a breakthrough of 500 mA cm⁻² high current density, and water splitting stability of 500 hours in acid, making it one of the best-performing acid-stable OER non-noble metal materials. The optimized catalyst with interatomic Co−Co distance (ca. 2.80 Å) followed oxo-oxo coupling mechanism that involved obvious oxygen bridges on dinuclear Co sites (1,090 cm⁻¹), confirmed by in situ SR-FTIR, XAFS and theoretical simulations. Furthermore, a major breakthrough of 120,000 mA g⁻¹ high mass current density using the first reported noble metal-free cobalt anode catalyst of Co−Co DASs/ZCC in PEM-WE at 2.14 V was recorded.     

CO2 Laser-Induced Graphene with an Appropriate Oxygen Species as an Efficient Electrocatalyst for Hydrogen Peroxide Synthesis

Oxygen species functionalized graphene (O−G) is an effective electrocatalyst for electrochemically synthesizing hydrogen peroxide (H₂O₂) by a 2 e⁻ oxygen reduction reaction (ORR). The type of oxygen species and degree of carbon crystallinity in O−G are two key factors for the high catalytic performance of the 2 e⁻ ORR. However, the general preparing method of O−G by the precursor of graphite has the disadvantages of consuming massive strong oxidant and washing water. Herein, the biomass-based graphene with tunable oxygen species is rapidly fabricated by a CO₂ laser. In a flow cell setup, the laser-induced graphene (LIG) with abundant active oxygen species and graphene structure shows high catalytic performance including high Faraday efficiency (over 78 %) and high mass activity (814 mmolg_catalyst⁻¹ h⁻¹), superior to most of the reported carbon-based electrocatalysts. Density function theory demonstrates the meta-C atoms at nearby C−O, O−C=O species are the key catalytic sites. Therefore, we develop one facile method to rapidly convert biomass to graphene electrocatalyst used for H₂O₂ synthesis.     

The study of the active surface for CO oxidation over supported Pd catalysts

CO oxidation was investigated on various powder oxide supported Pd catalysts by temperature-programmed reaction.The pre-reduced catalysts show significantly higher activities than the pre-oxidized ones.Model studies were performed to better understand the oxidation state,reactivities and stabilities of partially oxidized Pd surfaces under CO oxidation reaction conditions using an in situ infrared reflection absorption spectrometer(IRAS).Three O/Pd(100)model surfaces,chemisorbed oxygen covered surface,surface oxide and bulk-like surface oxide,were prepared and characterized by low-energy electron diffraction(LEED)and Auger electron spectroscopy(AES).The present work demonstrates that the oxidized palladium surface is less active for CO oxidation than the metallic surface,and is unstable under the reaction conditions with sufficient CO.     

Carbon black supported PtCu nanoparticles derived from mix-phased Cu precursor for high-performanced oxygen reduction reaction in acid medium

Alloying high-cost Pt with transition metals has been considered as an effective route to synthesize the electrocatalysts with low Pt loading and excellent activity towards oxygen reduction reaction (ORR) under acid solution. The galvanic replacement method, as featured with efficiency and simplicity, is widely reported to produce Pt-based bimetallic alloys and thereby declare the significance of reductive transition metal precursor on the enhancement of ORR performance. Herein, mix-phased Cu−Cu₂O precursor was applied to prepare carbon black supported highly dispersed PtCu alloy nanoparticles (PtCu/C). The proper Cu−Cu₂O ratios can exactly facilitate the generation of small sized PtCu alloy nanoparticles with regulated bimetallic content. Meanwhile, the Cu₂O phase is revealed to benefit the electron transfer from Pt to Cu and thus improve the intrinsic activity of Pt active sites. And the metallic Cu can favor the promotion of electrochemical active surface area. Consequently, the as-prepared PtCu/C behaves impressive ORR activity with half-wave potential of 0.88 V (vs. RHE) and mass activity of 0.49 A cm⁻² mg_Pt⁻¹ at 0.8 V, which is 9.8 times of commercial Pt/C catalysts. Our work will offer helpful advices for the development and regulation of novel Pt-based alloy materials towards diverse electrocatalysis.     

金属核及氧化铈的物理化学性质对一氧化碳氧化的影响

氧化铈独特的氧化还原性能使其适合用作氧化反应中的催化剂或载体.氧化铈负载的过渡金属纳米粒子或孤立的单原子提供了金属-载体界面,从而降低了去除界面氧原子的能耗,提供了可以参与ManVanKulvian氧化过程的活性氧物种.CO氧化是测试氧化铈负载催化剂还原性的主要探针反应,并且它常见于在相对低温下消除CO的各种应用中.在过量H2中优先氧化CO(PROX)反应可控制CO浓度达到超低水平,以防止氢氧化电催化剂中毒.催化剂在CO氧化反应中的活性和在PROX反应中对CO和H2的选择性取决于金属物种的种类和分散性、CeO2的结构和化学性质以及催化剂的合成方法.在这篇综述中,我们总结了最近发表的关于CeO2负载的金属纳米粒子和单原子催化CO氧化和PROX反应的相关工作;以及不同的负载金属和同种金属在普通CeO2表面上的反应性.我们还总结了密度泛函理论计算中提出的最可能的反应机理;并且讨论了各种负载型金属在PROX反应中影响CO氧化选择性的因素.     

Template-Oriented Polyaniline-Supported Palladium Nanoclusters for Reductive Homocoupling of Furfural Derivatives

Developing well-defined structures and desired properties for porous organic polymer (POP) supported catalysts by controlling their composition, size, and morphology is of great significance. Herein, we report a preparation of polyaniline (PANI) supported Pd nanoparticles (NPs) with controllable structure and morphology. The protocol involves the introduction of MnO₂ with different crystal structures (α, β, γ, δ, ϵ) serving as both the reaction template and the oxidant. The different forms of MnO₂ each convert aniline to a PANI that contains a unique regular distribution of benzene and quinone. This leads to the Pd/PANI catalysts with different charge transfer properties between Pd and PANI, as well as different dispersions of the metal NPs. In this case, the Pd/ϵ-PANI catalyst greatly improves the turnover frequency (TOF; to 88.3 h⁻¹), in the reductive coupling of furfural derivatives to potential bio-based plasticizers. Systematic characterizations reveal the unique oxidation state of the support in the Pd/ϵ-PANI catalyst and coordination mode of Pd that drives the formation of highly dispersed Pd nanoclusters. Density functional theory (DFT) calculations show the more electron rich Pd/PANI catalyst has the lower energy barrier in the oxidative addition step, which favors the C−C coupling reaction.     

One-Step Approach for Constructing High-Density Single-Atom Catalysts toward Overall Water Splitting at Industrial Current Densities

The construction of highly active, durable, and cost-effective catalysts is urgently needed for green hydrogen production. Herein, catalysts consisting of high-density Pt (24 atoms nm⁻²) and Ir (32 atoms nm⁻²) single atoms anchored on Co(OH)₂ were constructed by a facile one-step approach. Remarkably, Pt₁/Co(OH)₂ and Ir₁/Co(OH)₂ only required 4 and 178 mV at 10 mA cm⁻² for hydrogen evolution reaction and oxygen evolution reaction, respectively. Moreover, the assembled Pt₁/Co(OH)₂//Ir₁/Co(OH)₂ system showed mass activity of 4.9 A mg_{noble metal}⁻¹ at 2.0 V in an alkaline water electrolyzer, which is 316.1 times higher than that of Pt/C//IrO₂. Mechanistic studies revealed that reconstructed Ir−O₆ single atoms and remodeled Pt triple-atom sites enhanced the occupancy of Ir−O bonding orbitals and improved the occupation of Pt−H antibonding orbital, respectively, contributing to the formation of the O−O bond and the desorption of hydrogen. This one-step approach was also generalized to fabricate other 20 single-atom catalysts.     

Polyvinyl alcohol-modified graphene oxide as a support for bimetallic Pt–Pd electrocatalysts to enhance the efficiency of formic acid oxidation

The aim of this research was to study the efficiency of polyvinyl alcohol (PVA)-modified graphene oxide (GO) as a supporting material for catalysts that oxidize formic acid. The active metal catalysts (e.g., Pt and Pd) were electrodeposited on PVA/GO surfaces. The morphologies of the prepared catalysts were characterized by scanning electron microscopy and transmission electron microscopy, while their chemical compositions were identified by X-ray diffraction and X-ray photoelectron spectroscopy. The results show that compared with the other catalysts on GO, the prepared active PtPd alloy catalyst nanoparticles with 11.49–20.73 nm sizes were well dispersed on the PVA/GO surfaces. Electrochemical results indicate that the activities of the catalysts with PVA provided a higher current density than that of the catalysts without PVA. The bimetallic 3Pt3Pd/PVA/GO catalyst showed the greatest catalytic activity, stability, and CO oxidation when compared to those of other catalysts. The electronic, morphological, and structural properties promote the mass-charge transfer through the interaction. These results indicate that the PVA-modified GO provides a suitable site for active bimetallic catalyst surfaces, resulting in excellent formic acid oxidation and high CO elimination. The 3Pt3Pd/PVA/GO electrocatalyst is promising for enhancing formic acid oxidation.     

Graphene nanoplatelets supported metal nanoparticles for electrochemical oxidation of hydrazine

Graphene nanoplatelets have been applied as the support to electrodeposit monometallic Au and Pd nanoparticles as well as bimetallic Au–Pd nanoparticles. These nanoparticles have been characterized with scanning electron microscope, energy dispersive X-ray spectroscopy, X-ray diffraction spectroscopy, and electrochemical techniques. They are further utilized as the catalysts for electrochemical oxidation of hydrazine. The oxidation peak potential is − 0.35 and 0.53 V (vs. SCE) when monometallic Pd and Au nanoparticle are used as the catalysts. When bimetallic nanoparticles are applied as the catalyst, their composition affects the peak potential and peak current for the oxidation of hydrazine. Higher oxidation current is achieved when bimetallic Au–Pd nanoparticles with an atomic ratio of 3:1 are deposited on graphene nanoplatelets. Metal nanoparticle-loaded graphene nanoplatelets are thus novel platforms for electrocatalytic, electroanalytical, environmental, and related applications.     

Understanding the Surprising Oxidation Chemistry of Au−OH Complexes

Au is known to be fairly redox inactive (in catalysis) and bind oxygen adducts only quite weakly. It is thus rather surprising that stable Au−OH complexes can be synthesized and used as oxidants for both one- and two-electron oxidations. A charged Au^III−OH complex has been shown to cleave C−H and O−H bonds homolytically, resulting in a one-electron reduction of the metal center. Contrasting this, a neutral Au^III−OH complex performs oxygen atom transfer to phosphines, resulting in a two-electron reduction of the hydroxide proton to form a Au^III−H rather than causing a change in oxidation state of the metal. We explore the details of these two examples and draw comparisons to the more conventional reactivity exhibited by Au^I−OH. Although the current scope of known Au−OH oxidation chemistry is still in its infancy, the current literature exemplifies the unique properties of Au chemistry and shows promise for future findings in the field.     

Tracking an FeV(O) Intermediate for Water Oxidation in Water

High-valent iron-oxo species are appealing for conducting O−O bond formation for water oxidation reactions. However, their high reactivity poses a great challenge to the dissection of their chemical transformations. Herein, we introduce an electron-rich and oxidation-resistant ligand, 2-[(2,2′-bipyridin)-6-yl]propan-2-ol to stabilize such fleeting intermediates. Advanced spectroscopies and electrochemical studies demonstrate a high-valent Fe^V(O) species formation in water. Combining kinetic and oxygen isotope labelling experiments and organic reactions indicates that the Fe^V(O) species is responsible for O−O bond formation via water nucleophilic attack under the real catalytic water oxidation conditions.     

Direct synthesis of hydrogen peroxide from hydrogen and oxygen over insoluble Pd<Subscript>0.15</Subscript>M<Subscript>2.5</Subscript>H<Subscript>0.2</Subscript>PW<Subscript>12</Subscript>O<Subscript>40</Subscript> (M = K,Rb, and Cs) heteropolyacid catalysts

Palladium-containing insoluble heteropolyacid (HPA) catalysts (Pd_0.15M_2.5H_0.2PW₁₂O₄₀) were prepared by an ion-exchange method using various alkaline metal ions (M = K⁺, Rb⁺, and Cs⁺) (denoted as Pd-KPW, Pd-RbPW, and Pd-CsPW). They were then applied to the direct synthesis of hydrogen peroxide from hydrogen and oxygen. Conversion of hydrogen over the catalysts was almost identical with no great difference, while selectivity for hydrogen peroxide increased in the order of Pd-KPW < Pd-RbPW < Pd-CsPW. As a consequence, yield for hydrogen peroxide increased in the order of Pd-KPW < Pd-RbPW < Pd-CsPW. It was found that yield for hydrogen peroxide increased with increasing Pd 3d_5/2 binding energy of the catalyst. Among the catalysts tested, Pd-CsPW catalyst with the highest Pd 3d_5/2 binding energy showed the highest yield for hydrogen peroxide.