Nanoparticle formation and ultrathin film electrodeposition of carbazole dendronized polynorbornenes prepared by ring-opening metathesis polymerization

We report on the synthesis, electropolymerization, and nanoparticle formation of a series of electroactive carbazole-terminated dendronized linear polynorbornenes prepared by living ring-opening metathesis polymerization (ROMP). The molecular weight (MW) of the dendronized polymers was controlled by varying the feed ratio between the dendronized monomer and first-generation Grubbs' catalyst. Ultrathin films were prepared by electrodeposition. The electrochemical behavior and viscoelastic properties of such films were found to be highly dependent on the dendron generation and linear polymer MW as studied by electrochemical quartz crystal microbalance (E-QCM). Moreover, nanoparticle formation and size/shape control were observed by tuning the surface wetting properties of the substrate during adsorption and by intramolecular cross-linking via chemical oxidation in solution.     

Side-chain tunability of furan-containing low-band-gap polymers provides control of structural order in efficient solar cells

The solution-processability of conjugated polymers in organic solvents has classically been achieved by modulating the size and branching of alkyl substituents appended to the backbone. However, these substituents impact structural order and charge transport properties in thin-film devices. As a result, a trade-off must be found between material solubility and insulating alkyl content. It was recently shown that the substitution of furan for thiophene in the backbone of the polymer PDPP2FT significantly improves polymer solubility, allowing for the use of shorter branched side chains while maintaining high device efficiency. In this report, we use PDPP2FT to demonstrate that linear alkyl side chains can be used to promote thin-film nanostructural order. In particular, linear side chains are shown to shorten π-π stacking distances between backbones and increase the correlation lengths of both π-π stacking and lamellar spacing, leading to a substantial increase in the efficiency of bulk heterojunction solar cells.     

Stability of hydrogen bonds upon polymerization and color transition of diacetylenes: An FTIR spectroscopy study

FTIR spectra (400–7500 cm⁻¹) have been recorded for polycrystalline films and single crystals of the diacetylene 4BCMU in the monomer, blue and red polymer states, and of 3BCMU monomer. Particular attention was paid to the amide bands associated to the urethanes in the side groups, which form one-dimensional H-bond linear chains quite similar to those found in peptides and proteins. The positions and strengths of these absorptions are practically unchanged by polymerization or blue to red polymer color transition. This suggests that the H-bond linear chains are the main constitutive interactions in these crystals, and that the conjugated parts must and do “adapt” to the unchanged H-bond lines. No evidence of side group disordering was observed at the irreversible blue to red transition in poly-4BCMU crystal.     

Electroluminescence in ruthenium(II) complexes

We have investigated the electrochemical, spectroscopic, and electroluminescent properties of a family of diimine complexes of Ru featuring various aliphatic side chains as well as a more extended pi-conjugated system. The performance of solid-state electroluminescent devices fabricated from these complexes using indium tin oxide (ITO) and gold contacts appears to be dominated by ionic space charge effects. Their electroluminescence efficiency was limited by the photoluminescence efficiency of the Ru films and not by charge injection from the contacts. The incorporation of di-tert-butyl side chains on the dipyridyl ligand was found to be the most beneficial substitution in terms of reducing self-quenching of luminescence.     

Radiation grafting of 4-vinylpyridine onto poly-tetrafluoroethylene-perfluorovinylether (TFA) and poly-tetrafluoroethylene-polyethylene (ET) films

Preparation of membranes of poly-(tetrafluoroethylene-perfluorovinylether (TFA) and poly-tetrafluoroethylene-polyethylene (ET) films grafted with 4-vinylpyridine using γ-rays has been carried out. The appropriate reaction conditions were selected. Furthermore, quaternization of the pyridine of the grafted chains was conducted. The effect of monomer concentration on the rate of grafting was also investigated. The order of the grafting rate gram per hour depending on monomer concentration was found to be 0.94 and 1.0 for TFA and ET films, respectively. Some selected properties of the grafted films such as swelling behavior, dimensional stability, mechanical and electrical properties were investigated. The grafted film of TFA and ET showed a marked decrease in elongation with a significant increase in the tensile strength.     

Growth and structure of surface-initiated poly(n-alkylnorbornene) films

We report the surface-initiated growth of poly(alkylnorbornene) films via ring-opening metathesis polymerization (ROMP). The films are grown by exposure of a vinyl-terminated self-assembled monolayer (SAM) on gold to Grubbs first-generation catalyst and the subsequent exposure to an alkylnorbornene monomer. We investigate the influence of alkyl side chains on the structure, barrier, surface properties, and the growth kinetics of surface-initiated ROMP-type poly(norbornene) films. Rate constants for film growth are estimated for the comparison of monomer reactivity. The rate constant for film growth decreases by 3 orders of magnitude from norbornene to decylnorbornene, indicating a strong effect of chain length on initiation and/or propagation rates. Reflectance-absorption infrared spectroscopy is used to show the molecular level packing within the poly(alkylnorbornene) films is disrupted by the alkyl side chains. Tapping-mode atomic force microscopy is used to show that norbornene, butylnorbornene, and hexylnorbornene polymerize from the surface to form dense coatings, whereas decylnorbornene polymerizes to form isolated polymer clusters. The methyl terminus of the alkyl side chains increases the hydrophobicity of the poly(alkylnorbornene) films (thetaA(H2O) = 109-114 degrees) beyond that of a typical poly(norbornene) film (thetaA(H2O) approximately 106 degrees). The additional hydrophobicity throughout the film correlates with superior resistances against redox probes (Rf approximately 105 Omega.cm2) for poly(hexylnorbornene) when compared to polynorbornene (Rf approximately 104 Omega.cm2). The resistance of the poly(decylnorbornene) film (Rf approximately 102 Omega.cm2) is consistent with its nonuniform, cluster-like morphology.     

Surface-energy characteristics of films of molecular brushes based on polyimide and poly(methyl methacrylate)

Surface characteristics of film samples of molecular brushes with a polyimide backbone and PMMA side chains, as well as of films of polyimide constituting the backbone and linear PMMA homopolymers obtained via the selective destruction of the polyimide backbone of these brushes, are investigated for the first time. The surface-energy characteristics of the films of molecular brushes are determined by the structure and conformational state of the PMMA side chains. The conformations of molecular brushes possessing a polyimide backbone well screened by side chains are preserved after the transition from solutions to “dry” copolymer films and are characterized by high stability. The observed surface activity of molecular brushes is due to adhesion interactions with functional groups of the substrate. The difference in surface activities is caused by small-scale conformational changes in the side chains of molecular brushes. A globular core of molecular brushes formed by the polyimide backbone remains practically spherical and probably does not change in volume.     

Side-chain effect on the structural evolution and properties of poly(9,9-dihexylfluorene-alt-2,5-dialkoxybenzene) copolymers

The structural evolution and properties of poly(9,9-dihexylfluorene-alt-2,5-dialkoxybenzene) with different lengths of alkoxy side chains on phenylene have been systematically investigated by means of thermogravimetric analysis (TGA), X-ray diffraction (XRD), differential scanning calorimetry (DSC), polarizing light microscopy (PLM), atomic force microscopy (AFM), and cyclic voltammetry (CV) techniques. The polymer self-organizes into a lamellar structure consisting of both two- and one-layer packing, and the two-layer packing style is the dominant structure. In addition, the two-layer and one-layer packing structures also accompany the presence of planar stacking and/or crystalline and noncrystalline structures, thus maintaining the stability of the packing. PF6OC6 shows three ordered phases (two crystalline phases and one nematic phase) during the heating process. With further increase of the length of alkoxy side chains, only two ordered phases (one crystalline phase and one nematic phase) are observed and the polymers show a melting-recrystallization phenomenon, which is steadily inhibited as the length of the alkoxy side chains increases. The optical and electrochemical properties of the polymers do not exhibit noticeable dependence on the length of the alkoxy side chains. However, the thermal stability, the vibronic structures, and the full width at half-maximum (fwhm) in photoluminescence spectra of the films gradually decrease, and the oxidation onset potentials and the corresponding HOMO energy levels slightly increase with increasing length of alkoxy side chains on phenylene. These results indicate that the length variation of alkoxy side chains does not change the electronic structure of the polymer backbones, but remarkably affects the microphase separation between the flexible side chains and the conjugated backbones.     

Membranes obtained by preirradiation grafting of acrylic acid onto poly(tetrafluoroethylene–perfluorovinyl ether)

Some properties of the membranes obtained by preirradiation grafting of acrylic acid onto poly(tetrafluoroethylene-perfluorovinyl ether) copolymer (PFA) films have been investigated. The dimensional change caused by grafting and swelling behavior, water uptake, electrical conductivity, and mechanical properties of the grafted films were found to increase as the grafting proceeds. The influence of the preparation conditions (such as preirradiation dose, monomer concentration, grafting temperature, and film thickness) on those properties was studied. These properties were found to be dependent mainly on the degree of grafting regardless of grafting conditions, except at higher monomer concentration (>40 wt %). The electric conductivity and mechanical properties for the membranes obtained at higher AAc concentrations were lower than those obtained at lower ones. Analysis by x-ray microscopy of the grafted films revealed that the grafting begins at the part close to the film surface and proceeds into the central part with progressive diffusion of monomer to give finally homogeneous distribution of the electrolytes in the whole bulk of the polymer. The membranes show good electrochemical and mechanical properties which make them acceptable for practical use as cation-exchange membranes.     

Preparation of bipolar membranes via radiation peroxidation grafting

Single-sheet bipolar membranes have been prepared by grafting of styrene into radiation peroxidized LDPE films, which were then chlorosulfonated from one side, chloromethylated and quaternized from the other side. Various monomer systems were investigated and optimized. Obtained bipolar membranes were characterized by their specific electrical resistance, static potentials, rectification properties and water splitting capabilities.     

Effects of monomer structure on the morphology of polymer networks and the electro-optical properties of polymer-dispersed liquid crystal films

Polymer-dispersed liquid crystal (PDLC) films were prepared by photochemical polymerisation with a series of (meth)acrylate monomers. The effects of monomer structure on the morphology of polymer networks in the PDLC films were studied. The acrylate monomers without sidegroup chain formed uniform polymer networks. The methacrylate monomers with methyl as their sidegroup chains formed lace-like networks. The size of the LC droplets increased with increasing the length of the flexible chain of both methacrylate and acrylate monomers. Meanwhile, the effects of the morphology of the polymer network on the electro-optical properties of PDLC films were also investigated.     

Effect of monomer concentration on characteristics of methacrylic acid-grafted polyethylene film prepared by photografting

The effect of monomer concentration on photografting of methacrylic acid (MAA) onto linear low-density polyethylene (PE) film (thickness=30 μm) was investigated at 60 °C in water solvent together with the location of MAA-grafted chains. Xanthone was used as a photoinitiator which was coated on the film sample earlier. The higher percentage of grafting and graft efficiency were afforded for the system with the higher monomer concentration. The resultant MAA-grafted films were subjected to measurements of pH-responsive character and ability to adsorb cupric ion in order to understand the characteristics of function introduced. The grafted samples exhibited the pH-responsive character, where they shrank and swelled in acidic and alkaline media, respectively. The pH-responsive character of the grafted films was higher for the samples prepared in the system with a higher monomer concentration. Moreover, the grafted samples exhibited the ability to adsorb cupric ion, and the ability was reduced when the sample was prepared in the system with a higher monomer concentration. The different extents of the pH-responsive character and ability to adsorb cupric ion of the resulting grafted PE films were discussed in terms of location of grafted chains in the film substrate, which was determined by a scanning electron microscope and an attenuated total reflection infrared spectroscopy.     

pH-responsive copolymer films by surface-catalyzed growth

We have engineered a new class of pH-responsive polymer films on gold surfaces by first developing a controlled, surface-catalyzed polymerization to prepare a copolymer film consistent with poly(methylene-co-ethyl acetate) and subsequently hydrolyzing the ester side chains to varying extents to yield carboxylic acids (denoted as PM-CO2H). When pH is increased, the acid groups become deprotonated or charged, dramatically increasing their water solubility and greatly altering the film properties. The carboxylic acid content within the copolymer film can be adjusted by changing the monomer concentration ratio used in the polymerization process or the length of time for the hydrolysis. We have designed PM-CO2H films to consist predominately (>95%) of polymethylene (PM) so that the film is hydrophobic in the uncharged state and, thereby, exhibits an extremely large pH-induced response in barrier properties once ionized. The effect of polymer composition on pH response was investigated by electrochemical impedance spectroscopy (EIS), reflectance-absorption infrared spectroscopy (RAIRS), and contact angle measurements. At a 1%-4% molar acid content, the copolymer film exhibits a 5 orders of magnitude change in its resistance to ion transport over 2-3 pH units. The pH at which this response begins can be tailored from pH 5 to pH 10 by decreasing the acid content in the film from 4% to 1%.     

Layer structure estimation of three‐dimensional crystal and two‐dimensional molecular film for fluorinated comb copolymers

Comb copolymers containing both hydrogenated and fluorinated side‐chains were prepared by copolymerization using acrylic or methacrylic monomers in several ratios. The crystal structures of these copolymers and layer structures of their organized molecular films were investigated by wide‐angle X‐ray diffraction (WAXD), small‐angle X‐ray scattering (SAXS), and out‐of plane X‐ray diffraction. Further, to selectively estimate the regularity of shorter fluorocarbon side‐chains, organized molecular films of copolymers were investigated by polarized near‐edge X‐ray adsorption fine structure (NEXAFS) spectroscopy. From the results of these measurements, it was inferred that these copolymers formed highly ordered layer structures, and a long spacing was predominantly determined by the arrangement of hydrogenated side‐chains, except in copolymers having extremely high fluorocarbon contents. In the case of the organized molecular films, the fluorinated side‐chains of methacrylate copolymers cannot form a highly ordered arrangement, whereas those of acrylate copolymers were oriented on monolayers. However, in both cases, the hydrogenated side‐chains predominantly formed layer structures in the organized films, and the fluorinated side‐chains did not contribute to the formation of the layer structures. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 534–546, 2008     

Direct electrochemical nanopatterning of polycarbazole monomer and precursor polymer films: ambient formation of thermally stable conducting nanopatterns

The direct nanopatterning of polycarbazole on ultrathin films of a "precursor polymer" and monomer under ambient conditions is reported. In contrast to previous reports on electrochemical dip-pen nanolithography using monomer ink or electrolyte-saturated films in electrostatic nanolithography, these features were directly patterned on spin-cast films of carbazole monomer and poly(vinylcarbazole) (PVK) under room temperature and humidity conditions. Using a voltage-biased atomic force microscope (AFM) tip, electric-field-induced polymerization and cross-linking occurred with nanopatterning in these films. Different parameters, including writing speed and bias voltages, were studied to demonstrate line width and patterning geometry control. The conducting property (current-voltage (I-V) curves) of these nanopatterns was also investigated using a conducting-AFM (C-AFM) setup, and the thermal stability of the patterns was evaluated by annealing the polymer/monomer film above the glass transition (T(g)) temperature of the precursor polymer. To the best of our knowledge, this is the first report in which thermally stable conducting nanopatterns were drawn directly on monomer or polymer film substrates using an electrochemical nanolithography technique under ambient conditions.     

Superhydrophobic fiber mats by electrodeposition of fluorinated poly(3,4-ethyleneoxythiathiophene)

The control of surface morphology and wettability is crucial in the development of superhydrophobic surfaces, which implies new strategy and molecular design. In this Article, we report the synthesis, characterization, and electrochemical properties of original 3,4-ethyleneoxythiathiophenes (EOTT) as platform molecules and its derivatives bearing a semifluorinated chain of various length (F-octyl, F-hexyl, F-butyl, and F-ethyl). We report the influence of the fluorinated chain length as well as the presence of sulfur atoms in the monomer on the surface construction and nonwetting properties of the corresponding electrodeposited polymer films. Surprisingly, these films exhibit the possibility to obtain extremely long polymer fibers with a possible control of their length by a careful choice in the monomer structure. We show that the presence of sulfur atoms in the monomer structure seems to be necessary to modulate the formation of extremely long polymer fibers by aggregation of smaller polymer fibrils. In this Article, the formation of superhydrophobic material (contact angle above 150°) for four, six, and eight fluoromethylene units but also highly hydrophobic surfaces (contact angle above 125°) from extremely short chains (two fluoromethylene units) is also demonstrated.     

Synthesis and characterization of porphyrin-terthiophene and oligothiophene π-conjugated copolymers for polymer solar cells

Two novel conjugated polymers with alternating main chain structures of zinc porphyrin-terthiophene (P-PTT) and zinc porphyrin-oligothiophene (P-POT) were synthesized by Stille reaction. The effect of different lengths of thiophene chains on the thermal, optical, electrochemical, and photovoltaic properties of the two copolymers were investigated in detail. P-PTT exhibited higher onset decomposition temperature (392 °C) and glass-transition temperature (152 °C) than those of P-POT. The introduction of thiophene units in the meso-aryl positions of porphyrin resulted in the red shift and broader absorption spectrum compared with zinc porphyrin (P_Zn) monomer both in chloroform solutions and on thin solid films. The electrochemical properties indicated that the energy levels of the polymers were suitable for efficient charge transfer and separation at the interface between the polymer donor and PCBM acceptor. The bulk heterojunction solar cells based on P-PTT and P-POT showed power conversion efficiencies up to 0.32% and 0.18%, respectively.     

Exchange with temperature of the electron‐vibrational mode interaction between thienylene–phenylene copolymer rings

Thienylene–dialkoxyphenylene copolymers with polar side chains are soluble in most organic solvents and exhibit excellent glass adhesion properties, allowing the formation of homogeneous thin films on glass, quartz, and other substrates by spin coating. The electrochemical and optical properties of thin films of this material are studied in this work. The calculated band gap derived from electrochemical data (2.34 eV) is in good agreement with that observed from the UV–vis spectrum edge (2.25 eV). The analysis of the emission properties reveals the strong dependence on temperature of the electron coupling with different vibrational modes in the formation of the vibronic bands. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 964–971, 2010     

Synthesis and characterization of core–shell polyacrylate latex containing fluorine/silicone in the shell and the self-stratification film

A series of core–shell polyacrylate latexes with different fluorine/silicone monomer concentrations were prepared successfully by seeded emulsion polymerization. Dodecafluoroheptyl methacrylate and perfluorooctyl methacrylate with different fluorinated side chains were employed as fluorinated monomers, and γ-methacryloxypropyl triisopropoxidesilane (MAPTIPS) was used as a silicone-containing monomer as well as a self-cross-linking agent. The morphology and chemical structure of the latexes were characterized by Fourier transform infrared spectroscopy, transmission electron microscopy, and differential scanning calorimetry, and the self-stratification properties of the latex film were verified by X-ray photoelectron spectroscopy and static contact angle measurement. The results showed that the fluorine/silicone-containing polyacrylate latexes presented a uniformly spherical core–shell structure, and the latex films displayed a preferential distribution of fluorinated composition near the surface, which was more remarkable with the synergism effect between the fluorine monomer and MAPTIPS. Additionally, the hydrophobicity and oleophobicity of the latex films exhibited high relevance with the fluorine/silicone monomer concentrations as well as the fluorinated side-chain structure.     

梳状聚合物电解质的力学松弛时间

以苯乙烯 /马来酸酐共聚物为骨架 ,聚乙二醇单甲醚为侧链合成了 3种不同侧链长度的梳状高分子聚合物 ,制成了锂盐络合物薄膜 .动态力学性能研究结果表明 ,本体系是主链刚性、侧链较柔软的梳状接枝聚合物 .应用时间温度等效原理 ,选择Tα 作为参考温度 ,建立了主曲线 ,得到了移动因子图和等自由体积图 .Williams、Landel和Ferry(WLF)经验方程的两个参数C1、C2 随着盐浓度增加而增大 .若T0 =50℃作为参考温度 ,平均松弛时间lgτc 与锂盐浓度C呈线性关系 .随着侧链分子量增加 ,主曲线向高频率移动 ;平均松弛时间lgτn 与侧链分子量的关系也是线性的 ;另外随着盐的不同 ,主曲线也会产生移动 ,表明盐种类对松弛时间产生影响 .