Influence of disorder-to-order transition on lattice thermal expansion and oxide ion conductivity in (Ca(x)Gd(1-x))(2)(Zr(1-x)M(x))2O7 pyrochlore solid solutions

The effect of simultaneous substitutions of Ca at A site and Nb or Ta at B site in pyrochlore-type solid solutions: (Ca(x)Gd(1-x))(2)(Zr(1-x)M(x))(2)O(7) (x = 0.1, 0.2, 0.3, 0.4, 0.5 and M = Nb or Ta) were studied by powder X-ray diffraction (XRD), FT NIR Raman spectroscopic techniques and transmission electron microscopy. The solid solutions were prepared by the conventional high-temperature ceramic route. The XRD results and Rietveld analysis revealed that the defect fluorite structure of Gd(2)Zr(2)O(7) progressively changed to a more ordered pyrochlore phase by simultaneous substitutions at A and B sites. Raman spectroscopy reveals the progressive ordering in the anion sublattice with simultaneous doping. High-resolution images and selected-area electron diffraction patterns obtained from TEM confirms the XRD and Raman spectroscopic results. High-temperature XRD studies show that the lattice expansion coefficient in these pyrochlore oxides is of the order of 10(-6) K(-1). Lattice thermal expansion coefficient increases with increase of disorder in pyrochlore oxides, and hence the variation of thermal expansion coefficient with composition is also a good indicator of disordering in pyrochlore-type oxides. The ionic conducting properties of the samples were characterised by impedance spectroscopy, and it was found that Nb-doped compositions show a considerable change in conductivity near the phase boundary of disordered pyrochlore and defect fluorite phases.     

Role of bond strength on the lattice thermal expansion and oxide ion conductivity in quaternary pyrochlore solid solutions

Quaternary pyrochlore-type solid solutions, CaGdZrNb(1-x)Ta(x)O(7) (x = 0, 0.2, 0.4, 0.6, 0.8, 1), were prepared by a high-temperature ceramic route. The pyrochlore phases of the compounds were confirmed by powder X-ray diffraction (XRD), Raman spectroscopy, and transmission electron microscopy. The crystallographic parameters of the pyrochlore compounds were accurately determined by Rietveld analysis of the powder XRD data. The isovalent substitution of Ta in place of Nb at the B site can reveal the effect of chemical bonding on lattice thermal expansion and oxide ion conductivity because both Nb and Ta have the same ionic radius (0.64 ?). Lattice thermal expansion coefficients of the samples were calculated from high-temperature XRD measurements, and it was found that the thermal expansion coefficient decreases with substitution of Ta. Oxide ion conductivity measured by a two-probe method also shows the same trend with substitution of Ta, and this can be attributed to the high bond strength of the Ta-O bond compared to that of the Nb-O bond. Microstructural characterization using scanning electron microscopy proves that the size of the grains has a small effect on the oxide ion conductivity. Our studies established the role of chemical bonding in deciding the conductivity of pyrochlore oxides and confirmed that the 48f-48f mechanism of oxide ion conduction is dominant in pyrochlore oxides.     

Ca(2+)/vacancies and O2-/F- ordering in new oxyfluoride pyrochlores Li(2x)Ca1.5-x square 0.5-xM2O6F (M = Nb,Ta) for 0 < or = x < or = 0.5

New oxyfluorides Li(2x)Ca(1.5-x) square (0.5-x)M2O6F (M = Nb, Ta), belonging to the cubic pyrochlore structural type (Z = 8, a approximately 10.5 angstroms), were synthesized by solid state reaction for 0 < or = x < or = 0.5. XRD data allowed us to determine their structures from single crystals for the two alpha and beta-Ca(1.5) square (0.5)Nb2O6F forms and from powder samples for the others. This characterisation was completed by TEM and solid state 19F NMR experiments. For the Ca(1.5) square (0.5)M2O6F (x = 0) pyrochlore phases, the presence of a double ordering phenomenon is demonstrated, involving on one hand the Ca(2+) ions and the vacancies and on the other hand the oxide and the fluoride anions which are strictly located in the 8b sites of the Fd3m aristotype space group. The Ca(2+) ions/vacancies ordering leads to a reversible phase transition, a (P4(3)32) <--> beta (Fd3m). The 19F NMR study strongly suggests that, in the beta-phases, the fluoride ions are only on average at the centre of the Ca3 square tetrahedron. It shows that slightly different Ca-F distances occuring in alpha-Ca(1.5) square (0.5)Nb2O6F may be related to a more difficult thermal ionic and vacancies diffusion process than in the tantalate compound. This may explain the hysteresis phenomenon presented by the phase transition. A solid solution Li(2x)Ca(1.5-x) square (0.5-x) Ta2O6F (0 < or = x < or = 0.5) was prepared and the order-disorder phase transition observed for Ca(1.5) square (0.5)M2MO6F compounds disappears for all the other compositions where less or no more vacancies exist in the 16d sites. In the LiCaM2O6F compounds, the 19F NMR study allows us to determine the Ca(2+) and Li+ ions distributions around the fluoride ions and shows that the [FLi2Ca2] environment is clearly favoured.     

Synthesis, structure, chemical stability, and electrical properties of Nb-, Zr-, and Nb-codoped BaCeO3 perovskites

We report the effect of donor-doped perovskite-type BaCeO(3) on the chemical stability in CO(2) and boiling H(2)O and electrical transport properties in various gas atmospheres that include ambient air, N(2), H(2), and wet and dry H(2). Formation of perovskite-like BaCe(1-x)Nb(x)O(3±δ) and BaCe(0.9-x)Zr(x)Nb(0.1)O(3±δ) (x = 0.1; 0.2) was confirmed using powder X-ray diffraction (XRD) and electron diffraction (ED). The lattice constant was found to decrease with increasing Nb in BaCe(1-x)Nb(x)O(3±δ), which is consistent with Shannon's ionic radius trend. Like BaCeO(3), BaCe(1-x)Nb(x)O(3±δ) was found to be chemically unstable in 50% CO(2) at 700 °C, while Zr doping for Ce improves the structural stability of BaCe(1-x)Nb(x)O(3±δ). AC impedance spectroscopy was used to estimate electrical conductivity, and it was found to vary with the atmospheric conditions and showed mixed ionic and electronic conduction in H(2)-containing atmosphere. Arrhenius-like behavior was observed for BaCe(0.9-x)Zr(x)Nb(0.1)O(3±δ) at 400-700 °C, while Zr-free BaCe(1-x)Nb(x)O(3±δ) exhibits non-Arrhenius behavior at the same temperature range. Among the perovskite-type oxides investigated in the present work, BaCe(0.8)Zr(0.1)Nb(0.1)O(3±δ) showed the highest bulk electrical conductivity of 1.3 × 10(-3) S cm(-1) in wet H(2) at 500 °C, which is comparable to CO(2) and H(2)O unstable high-temperature Y-doped BaCeO(3) proton conductors.     

A new quasi-one-dimensional ternary chalcogenide: synthesis,crystal structure,and electronic structure of Nb1+xV1-xS5 (x = 0.18)

The new low-dimensional ternary chalcogenide, Nb(1+x)V(1-x)S(5) (x = 0.18), has been prepared and characterized. This compound crystallizes in the monoclinic space group, C2(2h)-P2(1)/m with two formula units in a cell with dimensions a = 9.881(4) A, b = 3.329(1) A, c = 8.775(3) A, and beta = 114.82(3) degrees. The layer is composed of two unique chains of face-sharing Nb-centered bicapped trigonal prisms and edge-sharing M-centered octahedra (M = Nb or V). The electronic structures of the monomeric basic building units, NbS(8) and VS(6), and hypothetical and real one-, two-, and three-dimensional structures making up the compound are examined to understand the nature of inter- and intrachain interactions and orbital overlapping among metals and sulfur atoms. The electronic structure of Nb(1+x)V(1-x)S(5) is essentially given by superimposing those of the individual chains. V d orbitals are found to be crucial for the one-dimensional metallic conductivity along the chain axis.     

Tunable compositions and luminescent performances on members of the layered rare-earth hydroxides (Y1-xLnx)2(OH)5NO3·nH2O (Ln = Tb, Eu)

Members of the layered rare-earth hydroxides (LRHs) family with the generalized formula (Y(1-x)Ln(x))(2)(OH)(5)NO(3)·nH(2)O (Ln = Tb, Eu; 0% ≤x≤ 100%) (named as YTb-LRHs, YEu-LRHs) have been synthesized via a hydrothermal route. Crystal structures and elemental compositions have been investigated by X-ray diffraction (XRD), elemental analysis, scanning electron microscopy (SEM), and transmission electron microscopy (TEM). These results show that Ln(3+) species are successfully incorporated into the LRH host lattice to form layered hydroxide solid solutions. The YTb-LRHs and YEu-LRHs samples exhibit well-defined photoluminescence. The color of the luminescence can be tuned by changing the concentration of Ln(3+). Furthermore, the ternary YTbEu-LRH system was also synthesized, an example of the host layers containing variable types of the lanthanide cations. This provides the possibility to tune the chemical composition and the luminescent properties of the lanthanide species with the flexibility of intercalation hosts for potential applications in luminescent materials and field emission displays.     

一种新型的双功能氧电极材料——Pb-Sb-Ru焦绿石型复合氧化物的合成及其性能研究

用溶液共沉淀法合成的比表面高、导电性良好的焦绿石型复合氧化物(Pb_2[Ru_(2-s-y)Sb_(?)Pb_(?)]-O_(7-s)),是一种富Pb的氧化物。其良好的导电性来源于Pb、Ru价态的可变性和多种价态的共存。用这种材料制成的多孔电极上得到的氧还原、氧析出稳态极化曲线及寿命实验结果表明,室温下这种氧化物在KOH溶液中,对氧还原及氧析出均具有很好的电催化活性和稳定性。     

Stability and structural evolution of Ce(IV)(1-x)Ln(III)(x)O(2-x/2) solid solutions: a coupled μ-Raman/XRD approach

Several CeO(2)-based mixed oxides with general composition Ce(1-x)Ln(x)O(2-x/2) (for 0 ≤ x ≤ 1 and Ln = La, Nd, Sm, Eu, Gd, Dy, Er, or Yb) were prepared using an initial oxalic precipitation leading to a homogeneous distribution of cations in the oxides. After characterization of the Ce/Nd oxalate precursors and then thermal conversion to oxides at T = 1000 °C, investigation of the crystalline structure of these oxides was carried out by XRD and μ-Raman spectroscopy. Typical fluorite Fm ?3m structure was obtained for relatively low Ln(III) contents, while a cubic Ia ?3? superstructure was evidenced above x ≈ 0.4. Moreover, since Nd(2)O(3) does not crystallize with the Ia ?3?-type structure, two-phase systems composed with additional hexagonal Nd(2)O(3) were obtained for x(Nd) ≥ 0.73 in the Ce(1-x)Nd(x)O(2-x/2) series. The effect of heat treatment temperature on these limits was explored through μ-Raman spectroscopy, which allowed determining the presence of small amounts of the different crystal structures observed. In addition, the variation of the Ce(1-x)Ln(x)O(2-x/2) unit cell parameter was found to follow a quadratic relation as a result of the combination between increasing cationic radius, modifications of cation coordination, and decreasing O-O repulsion caused by oxygen vacancies.     

Electronic phase separation in transition metal oxide systems

Electronic phase separation is increasingly getting recognized as a phenomenon of importance in understanding the magnetic and electron transport properties of transition metal oxides. The phenomenon dominates the rare-earth manganates of the formula Ln(1-x)A(x)MnO(3)(Ln = rare earth and A = alkaline earth) which exhibit ferromagnetism and metallicity as well as charge-ordering, depending on the composition, size of A-site cations and external factors such as magnetic and electric fields. We discuss typical phase separation scenarios in the manganates, with particular reference to Pr(1-x)Ca(x)MnO(3)(x= 0.3-0.4), (La(1-x)Ln(x))(0.7)Ca(0.3)MnO(3)(Ln = Pr, Nd, Gd and Y) and Nd(0.5)Sr(0.5)MnO(3). Besides discussing the magnetic and electron transport properties, we discuss electric field effects. Rare-earth cobaltates of the type Pr(0.7)Ca(0.3)CoO(3) and Gd(0.5)Ba(0.5)CoO(3) also exhibit interesting magnetic and electron transport properties which can be understood in terms of phase separation.     

Solvothermal syntheses of [Ln(en)3(H2O)x(mu(3-x)-SbS4)] (Ln = La, x = 0; Ln = Nd, x = 1) and [Ln(en)4]SbS4.0.5en (Ln = Eu, Dy, Yb): a systematic study on the formation and crystal structures of new lanthanide thioantimonates(V)

New lanthanide thioantimonate(V) compounds, [Ln(en)3(H2O)x(mu(3-x)-SbS4)] (en = ethylenediamine, Ln = La, x = 0, Ia; Ln = Nd, x = 1, Ib) and [Ln(en)4]SbS4.0.5en (Ln = Eu, IIa; Dy, IIb; Yb, IIc), were synthesized under mild solvothermal conditions by reacting Ln2O3, Sb, and S in en at 140 degrees C. These compounds were classified as two types according to the molecular structures. The crystal structure of type I (Ia and Ib) consists of one-dimensional neutral [Ln(en)3(H2O)x(mu(3-x)-SbS(4))]infinity (x = 0 or 1) chains, in which SbS4(3-) anions act as tridentate or bidentate bridging ligands to interlink [Ln(en)3]3+ ions, while the crystal structure of type II (IIa, IIb, and IIc) contains isolated [Ln(en)4]3+ cations, tetrahedral SbS4(3-) anions, and free en molecules. A systematic investigation of the crystal structures of the five lanthanide compounds, as well as two reported compounds, clarifies the relationship between the molecular structure and the entity of the lanthanide(III) series, such as the stability of the lanthanide(III)-en complexes, the coordination number, and the ionic radii of the metals.     

Mn(I) in an extended oxide: the synthesis and characterization of La(1-x)Ca(x)MnO(2+δ) (0.6 ≤ x ≤ 1)

Reduction of La(1-x)Ca(x)MnO(3) (0.6 ≤ x ≤ 1) perovskite phases with sodium hydride yields materials of composition La(1-x)Ca(x)MnO(2+δ). The calcium-rich phases (x = 0.9, 1) adopt (La(0.9)Ca(0.1))(0.5)Mn(0.5)O disordered rocksalt structures. However local structure analysis using reverse Monte Carlo refinement of models against pair distribution functions obtained from neutron total scattering data reveals lanthanum-rich La(1-x)Ca(x)MnO(2+δ) (x = 0.6, 0.67, 0.7) phases adopt disordered structures consisting of an intergrowth of sheets of MnO(6) octahedra and sheets of MnO(4) tetrahedra. X-ray absorption data confirm the presence of Mn(I) centers in La(1-x)Ca(x)MnO(2+δ) phases with x < 1. Low-temperature neutron diffraction data reveal La(1-x)Ca(x)MnO(2+δ) (x = 0.6, 0.67, 0.7) phases become antiferromagnetically ordered at low temperature.     

A simple route to full structural analysis of biophosphates and their application to materials discovery

An integrated suite of synthesis and characterisation techniques that includes synchrotron-based single crystal, powder X-ray diffraction, nuclear magnetic resonance and electron diffraction have been employed to uncover two new distinct structures in the Ca(x)Ba(2-x)P(2)O(7) polymorphic phosphate system. These materials have particular relevance for their application as both biomaterials and phosphors. Calcium barium pyrophosphate, CaBaP(2)O(7), was shown by a combination of spectroscopic and diffraction techniques to have two polymorphs distinct in structure from all of the five previously reported polymorphs of Ca, Sr and Ba pyrophosphate. A high temperature polymorph HT-CaBaP(2)O(7) prepared at 1200 °C is orthorhombic, of space group P(212121) with a = 13.0494 ?, b = 8.9677 ?, c = 5.5444 ?. A low temperature polymorph LT-CaBaP(2)O(7), prepared below 1000 °C, is monoclinic with space group P2(1)/c and dimensions a = 12.065 ?, b = 10.582 ?, c = 9.515 ?, β = 94.609°.     

Ln(III)(2)Mn(III)(2) heterobimetallic "butterfly" complexes displaying antiferromagnetic coupling (Ln = Eu, Gd, Tb, Er)

The isostructural heterometallic complexes [Ln(III)(2)Mn(III)(2)O(2)(ccnm)(6)(dcnm)(2)(H(2)O)(2)] (Ln = Eu (1Eu), Gd (1Gd), Tb (1Tb), Er (1Er); ccnm = carbamoylcyanonitrosomethanide; dcnm = dicyanonitrosomethanide) have been synthesised and structurally characterised. The in situ transition metal promoted nucleophilic addition of water to dcnm, forming the derivative ligand ccnm, plays an essential role in cluster formation. The central [Ln(III)(2)Mn(III)(2)(O)(2)] moiety has a "butterfly" topology. The coordinated aqua ligands and the NH(2) group of the ccnm ligands facilitate the formation of a range of hydrogen bonds with the lattice solvent and neighbouring clusters. Magnetic measurements generally reveal weak intracluster antiferromagnetic coupling, except for the large J(MnMn) value in 1Gd. There is some evidence for single molecule magnetic (SMM) behaviour in 1Er. Comparisons of the magnetic properties are made with other recently reported butterfly-type {Ln(III)(x)M(III)(4-x) (d-block)} clusters, x = 1, 2; M = Mn, Fe.     

Structural and spectroscopic properties of pure and doped Ba6Ti2Nb8O30 tungsten bronze

Pure and doped Ba(6)Ti(2)Nb(8)O(30) (BTN), obtained by substituting M = Cr, Mn, or Fe on the Ti site (Ba(6)Ti(2-x) M(x)Nb(8)O(30), x = 0.06 and 0.18) and Y and Fe on the Ba and Ti sites, respectively (Ba(6-x)Y(x)Ti(2-x)Fe(x)Nb(8)O(30), x= 0.18), are synthesized. The influence of cation doping on the local structure, the cation oxidation state, and the possible defect formation able to maintain the charge neutrality are investigated by spectroscopic (electron paramagnetic resonance (EPR) and micro-Raman), structural (X-ray powder diffraction) and transport (impedance spectroscopy, thermoelectric power) measurements, in the temperature range of 300-1200 K in air and N(2) flow. Starting from the valence state of the doping ions (Fe(3+), Cr(3+), and Mn(2+)), determined by EPR, and from thermoelectric power measurements, evidencing a negative charge transport, different charge-compensating defect equilibria, based on the creation of positive electron holes or oxygen vacancies and electrons, are discussed to interpret the conductivity results.     

Discovery and characterization of novel oxide anodes for solid oxide fuel cells

The search for alternative anode materials for solid oxide fuel cells (SOFCs) has been reviewed in the light of structure, stability, conductivity, chemical and thermal compatibility with electrolyte YSZ. In this review, we have presented the advantages and disadvantages of the traditional Ni-YSZ anode for SOFCs. The development of alternative anode for SOFCs with fluorite, rutile, tungsten bronze, pyrochlore, perovskite and spinel structures has been reviewed and discussed in detail. Among the reported materials systems, materials with perovskite structure are promising particularly where two ions with complimentary function are present on the B-site at high concentration. We have recently found a good redox stable anode (La(0.75)Sr(0.25))(1-x)Cr(0.5)Mn(0.5)O(3) (0 相似文献   

Cd(1-x)Zn(x)O [0.05 ≤x≤ 0.26] synthesized by vapor-diffusion induced hydrolysis and co-nucleation from aqueous metal salt solutions

Nanoparticulate Cd(1-x)Zn(x)O (x = 0, 0.05-0.26, 1) is synthesized in a simple two-step synthesis approach. Vapor-diffusion induced catalytic hydrolysis of two molecular precursors at low temperature induces co-nucleation and polycondensation to produce bimetallic layered hydroxide salts (M = Cd, Zn) as precursor materials which are subsequently converted to Cd(1-x)Zn(x)O at 400 °C. Unlike ternary materials prepared by standard co-precipitation procedures, all products presented here containing < 30 mol% Zn(2+) ions are homogeneous in elemental composition on the micrometre scale. This measured compositional homogeneity within the samples, as determined by energy dispersive spectroscopy and inductively coupled plasma spectroscopy, is a testimony to the kinetic control achieved by employing slow hydrolysis conditions. In agreement with this observation, the optical properties of the materials obey Vegard's Law for a homogeneous solid solution of Cd(1-x)Zn(x)O, where x corresponds to the values determined by inductively coupled plasma analysis, even though powder X-ray diffraction shows phase separation into a cubic mixed metal oxide phase and a hexagonal ZnO phase at all doping levels.     

Solid state NMR characterization of individual compounds and solid solutions formed in Sc(2)O(3)--V(2)O(5)--Nb(2)O(5)--Ta(2)O(5) system

In this study, (51)V, (45)Sc and (93)Nb MAS NMR combined with satellite transition spectroscopy analysis were used to characterize the complex solid mixtures: VNb(9(1-x))Ta(9x)O(25), ScNb((1-x))Ta(x)O(4) and ScNb(2(1-x))Ta(2x)VO(9) (x = 0, 0.3, 0.5, 0.7, 1.0). This led us to describe the structures of Sc and V sites. The conclusions were based on accurate values for (51)V quadrupole coupling and chemical shift tensors obtained with (51)V MAS NMR/SATRAS for VNb(9)O(25), VTa(9)O(25) and ScVO(4). The (45)Sc NMR parameters have been obtained for Sc(2)O(3), ScVO(4), ScNbO(4) and ScTaO(4). On the basis of (45)Sc NMR and data available from literature, the ranges of the (45)Sc chemical shift have been established for ScO(6) and ScO(8). The gradual change of the (45)Sc and (51)V NMR parameters with x confirms the formation of solid solutions in the process of synthesis of VNb(9(1-x))Ta(9x)O(25) and ScNb((1-x))Ta(x)O(4), in contrast to ScNb(2(1-x))Ta(2x)VO(9). The cation sublattice of ScNb((1-x))Ta(x)O(4) is found to be in octahedral coordination. The V sites in VNb(9(1-x))Ta(9x)O(25) are present in the form of slightly distorted tetrahedra. The (93)Nb NMR parameters have been obtained for VNb(9)O(25).     

Cation deficient layered Ruddlesden-Popper-related oxysulfides La2LnMS2O5 (Ln=La, Y; M=Nb, Ta)

The structures of the new oxysulfide Ruddlesden-Popper phases La2LnMS2O5 (Ln=La, Y; M=Nb, Ta) are reported together with an iodide-containing variant: La3-xNb1+xS2O5I2x (0相似文献   

Organic-inorganic hybrids assembled by bis(undecatungstophosphate) lanthanates and dinuclear copper(II)-oxalate complexes

A series of organic-inorganic hybrid compounds, K2H7[{Ln(PW11O39)2}{Cu2(bpy)2(mu-ox)}].xH2O (Ln = La, x approximately = 18 (1); Ln = Pr, x approximately = 18(2); Ln = Eu, x approximately = 16(3); Ln = Gd, x approximately 22(4); Ln = Yb, x approximately = 19 (5); bpy = 2,2'-bipyridine and ox = oxalate), have been isolated by the conventional solution method. Single-crystal X-ray diffraction studies reveal that compounds 1-5 are isomorphic and consist of one-dimensional chains, which are constructed by alternating bis(undecatungstophosphate) lanthanates [Ln(PW11O39)2](11-) and dinuclear copper(II)-oxalate complexes [Cu2(bpy)2(mu-ox)]2+.pi-pi interactions of the bpy ligands from adjacent chains lead to their three-dimensional structures. An analogue of potassium K2H9[{K(PW11O39)2}{Cu2(bpy)2(mu-ox)}1].approximately 20.5H2O(6) has also been obtained. The syntheses and structures of these compounds are reported here. Magnetic properties of 1, 2 and 3 are discussed as well. Attempts to crystallize similar compounds containing Co(II) and Ni(II) were unsuccessful.     

CaMn(1-x)Nb(x)O3 (x < or = 0.08) perovskite-type phases as promising new high-temperature n-type thermoelectric materials

Perovskite-type CaMn(1-x)Nb(x)O(3+/-delta) (x = 0.02, 0.05, and 0.08) compounds were synthesized by applying both a "chimie douce" (SC) synthesis and a classical solid state reaction (SSR) method. The crystallographic parameters of the resulting phases were determined from X-ray, electron, and neutron diffraction data. The manganese oxidations states (Mn(4+)/Mn(3+)) were investigated by X-ray photoemission spectroscopy. The orthorhombic CaMn(1-x)Nb(x)O(3+/-delta) (x = 0.02, 0.05, and 0.08) phases were studied in terms of their high-temperature thermoelectric properties (Seebeck coefficient, electrical resistivity, and thermal conductivity). Differences in electrical transport and thermal properties can be correlated with different microstructures obtained by the two synthesis methods. In the high-temperature range, the electron-doped manganate phases exhibit large absolute Seebeck coefficient and low electrical resistivity values, resulting in a high power factor, PF (e.g., for x = 0.05, S(1000K) = -180 microV K(-1), rho(1000K) = 16.8 mohms cm, and PF > 1.90 x 10(-4) W m(-1) K(-2) for 450 K < T < 1070 K). Furthermore, lower thermal conductivity values are achieved for the SC-derived phases (kappa < 1 W m(-1) K(-1)) compared to the SSR compounds. High power factors combined with low thermal conductivity (leading to ZT values > 0.3) make these phases the best perovskitic candidates as n-type polycrystalline thermoelectric materials operating in air at high temperatures.