Insights into the retention mechanism on an octadecylsiloxane-bonded silica stationary phase (HyPURITY C18) in reversed-phase liquid chromatography

Plots of the retention factor against mobile phase composition were used to organize a varied group of solutes into three categories according to their retention mechanism on an octadecylsiloxane-bonded silica stationary phase HyPURITY C18 with methanol-water and acetonitrile-water mobile phase compositions containing 10-70% (v/v) organic solvent. The solutes in category 1 could be fit to a general retention model, Eq. (2), and exhibited normal retention behavior for the full composition range. The solutes in category 2 exhibited normal retention behavior at high organic solvent composition with a discontinuity at low organic solvent compositions. The solutes in category 3 exhibited a pronounced step or plateau in the middle region of the retention plots with a retention mechanism similar to category 1 solutes at mobile phase compositions after the discontinuity and a different retention mechanism before the discontinuity. Selecting solutes and appropriate composition ranges from the three categories where a single retention mechanism was operative allowed modeling of the experimental retention factors using the solvation parameter model. These models were then used to predict retention factors for solutes not included in the models. The overwhelming number of residual values [log k (experimental) - log k (model predicted)] were negative and could be explained by contributions from steric repulsion, defined as the inability of the solute to insert itself fully into the stationary phase because of its bulkiness (i.e., volume and/or shape). Steric repulsion is shown to strongly depend on the mobile phase composition and was more significant for mobile phases with a low volume fraction of organic solvent in general and for mobile phases containing methanol rather than acetonitrile. For mobile phases containing less than about 20 % (v/v) organic solvent the mobile phase was unable to completely wet the stationary phase resulting in a significant change in the phase ratio and for acetonitrile (but less so methanol) changes in the solvation environment indicated by a discontinuity in the system maps.     

Characterization of a novel pyridinium bromide surface confined ionic liquid stationary phase for high-performance liquid chromatography under normal phase conditions via linear solvation energy relationships

Utilizing linear solvation free energy relationship methodology, a novel pyridinium bromide surface confined ionic liquid (SCIL) stationary phase was characterized under normal phase high-performance liquid chromatographic conditions. A limited set of neutral aromatic probe solutes were utilized to rapidly assess the utility of the LSER model, using mobile phases of hexane modified with 2-propanol. The excellent correlation of the global fit across the mobile phase composition range used in this study for the experimental and calculated retention values (R(2)=0.994) indicates that the LSER model is an appropriate model of characterizing this polar bonded phase under normal phase conditions. For a limited subset of compounds, retention on the pyridinium bromide SCIL stationary phase is more highly correlated with that obtained on a cyano column than on a diol column under NP conditions.     

Contribution of Steric Repulsion to Retention on an Octadecylsiloxane-Bonded Silica Stationary Phase in Reversed-Phase Liquid Chromatography

Plots of the retention factor against mobile phase composition were used to organize a varied group of solutes into three categories according to their retention mechanism on an octadecylsilioxane-bonded silica stationary phase, Ascentis ^TM C18, with acetonitrile-water and methanol-water mobile phase compositions containing 10–70% (v/v) organic solvent. The solutes in category 1 could be fit to a general retention model, Eq. (1), and exhibited normal retention behavior for the full composition range. The solutes in category 2 exhibited normal retention behavior at high organic solvent compositions with a discontinuity at low organic solvent mobile phase compositions. The solutes in category 3 exhibited a pronounced step or plateau in the middle region of the retention plots with a retention mechanism similar to category 1 at mobile phase compositions after the discontinuity and a different retention mechanism before the discontinuity. Selecting solutes and appropriate composition ranges from the three categories where a single retention mechanism was operative allowed modeling of the experimental retention factors using the solvation parameter model. These models were then used to predict retention factors for solutes excluded from the models. The overwhelming number of residual values, here defined as the difference between experimental and model predicted retention factors for the excluded solutes, could be explained by contributions from steric repulsion. The latter defined as the inability of solutes to fully insert themselves into the solvated stationary phase because of their size or conformation. Steric repulsion resulted in a systematic reduction in retention compared with predicted values for the fully inserted solute. The bonding density of the stationary phase; the type and composition of the mobile phase; and the size, conformation, type and number of functional groups on the solute are shown to affect the contribution of steric repulsion to the retention mechanism.     

Factors Influencing the Isothermal Retention Indices of 51 Solutes on 12 Stationary Phases of Different Polarity: Applicability of the Solvation Parameter Model

Isothermal retention indices (I) at 333–413 K on 12 stationary phases (SPs) covering a wide polarity range of a variety of volatile solutes belonging to 7 one-heteroatom chemical function series and 10 non-series solutes have been determined. The I values were computed with a method (LQG method) which does not require the determination of holdup times of the chromatographic column. I values of some compounds never before studied are reported. The influence on the retention indices of the column temperature, methylene number, and polarity of both the stationary phase and the solute has been studied. The solvation parameter model (SPM) as a function of I has been used for predicting I values, and for unraveling the influence of the polarity of stationary phase and solute on the retention indices. Seeley et al.’s formulation of the SPM has been used for quantifying the influence of polar and non-polar interactions on the I, and for checking the agreement between calculated and experimental values. According to our results, the I values obtained by the modified SPM can be considered equal to the experimental I values at the 99 % confidence level.

     

Predicting retention in reverse‐phase liquid chromatography at different mobile phase compositions and temperatures by using the solvation parameter model

The prediction capability of the solvation parameter model in reverse‐phase liquid chromatography at different methanol‐water mobile phase compositions and temperatures was investigated. By using a carefully selected set of solutes, the training set, linear relationships were established through regression equations between the logarithm of the solute retention factor, logk, and different solute parameters. The coefficients obtained in the regressions were used to create a general retention model able to predict retention in an octadecylsilica stationary phase at any temperature and methanol‐water composition. The validity of the model was evaluated by using a different set (the test set) of 30 solutes of very diverse chemical nature. Predictions of logk values were obtained at two different combinations of temperature and mobile phase composition by using two different procedures: (i) by calculating the coefficients through a mathematical linear relationship in which the mobile phase composition and temperature are involved; (ii) by using a general equation, obtained by considering the previous results, in which only the experimental values of temperature and mobile phase composition are required. Predicted logk values were critically compared with the experimental values. Excellent results were obtained considering the diversity of the test set.     

线性溶剂-能量关系模型法评价纤维素三(3,5-二甲基苯基氨基中酸酯)涂敷手性固定相的作用力及其对手性拆分的影响

利用线性溶剂-能量关系模型(LSER)对分别以氨丙基硅胶(APS)和硅胶(SiO2)为基质的两种纤维素三(3,5-二甲基苯基氨基甲酸酯)(CDMPC)手性固定相(CSP)存在的作用力进行研究.利用33种分析物的LSER描述符号及分析物在固定相上的保留时间进行多元线性回归,通过对回归所得到的系统参数的分析来评价固定相存在的作用力.分析表明:两种固定相在正相条件下存在较弱的π-π作用力,较强的偶极-偶极作用力.而氢键作用力的大小受到基质的影响,以APS为基质的固定相给电子能力较强;而以SiO2为基质的固定相给质子能力较强.     

Solvation parameter models for retention on perfluorinated and fluorinated low temperature glassy carbon stationary phases in reversed-phase liquid chromatography

The retention of solutes on two fluorinated low temperature glassy carbon (F-LTGC) stationary phases under reversed-phase liquid chromatographic conditions was studied by employing the solvation parameter model. The two fluorinated glassy carbon stationary phases were produced by slowly heating zirconia particles that were encapsulated with oligo[1,3-dibutadiyne-1,3-(tetrafluoro)phenylene] precursor polymer to two different final temperatures (200 and 400 degrees C). The resulting carbon particles had different amounts of fluorine after thermal processing. The solvation parameter models indicated that different intermolecular interactions are important in describing retention on the two stationary phases. The interactions that are important for describing retention on the 200 degrees C processed F-LTGC stationary phase are hydrogen bond basicity> or =dispersion>hydrogen bond acidity>dipolarity/polarizability. The interactions that describe the retention on the 400 degrees C processed F-LTGC are hydrogen bond basicity>dispersion>excess molar refraction> or =hydrogen bond acidity. The solvation parameter model for the 200 degrees C processed F-LTGC showed similar trends in the relative importance of intermolecular interactions as previously found for octadecyl-polysiloxane stationary phases, while the 400 degrees C processed F-LTGC had similar intermolecular interactions with solutes as found with porous glassy carbon in that pi-pi interactions with the carbon surface contribute more so to the retention.     

Model for predicting comprehensive two-dimensional gas chromatography retention times

A model for approximating the relative retention of solutes in comprehensive two-dimensional gas chromatography (GCxGC) is presented. The model uses retention data from standard single-column temperature-programmed separations. The one-dimensional retention times are first converted into retention indices and then these indices are combined in a simple manner to generate a retention diagram. A retention diagram is an approximation of the two-dimensional chromatogram that has retention order and spacing in both dimensions similar to that found in the experimental chromatogram. If required, the retention diagram can be scaled to more closely resemble the two-dimensional chromatogram. The model has been tested by using retention time data from single-column gas chromatography-mass spectrometry and valve-based GCxGC. A total of 139 volatile organic compounds (VOCs) were examined. Approximately half of the VOCs had a single functional group and a linear alkyl chain (i.e., compounds with the structure Z-(CH(2))(n)-H). The retention diagrams had primary retention orders that were in excellent agreement with the GCxGC chromatograms. The relative secondary retention order for compounds with similar structures was also accurately predicted by the retention diagram. However, the relative secondary retention for compounds with dissimilar structures, such as acyclic alcohols and multi-substituted alkylbenzenes, were less accurately modeled. This study demonstrates how readily available single-column retention time data can be used to provide an a priori estimate of the relative retention of solutes in a GCxGC chromatogram. Such a capability is useful for screening possible combinations of stationary phases.     

System Maps for XTerra MS C18: Effect of Solvent Type on Selectivity in Reversed-Phase Liquid Chromatography

The solvation parameter model is used to establish the contribution of cohesion, dipole-type and hydrogen-bonding interactions to the retention mechanism on an XTerra MS C₁₈ stationary phase with acetonitrile-water, methanol-water and tetrahydrofuran-water mobile phases containing from 10 to 70% (v/v) organic solvent. Solute size and electron lone pair interactions are responsible for retention while dipole-type and hydrogen-bonding interactions result in lower retention. The volume fraction of water in the mobile phase plays a dominant role in the retention mechanism. However, the change in values of the system constants of the solvation parameter model cannot be explained entirely by assuming the principle role of the organic solvent is to act as a diluent for the mobile phase. Selective solvation of the stationary phase by the organic solvent and the ability of the organic solvent to extract water into the stationary phase, and/or the absorption of water-organic solvent complexes by the stationary phase, are important in accounting for the details revealed about the retention mechanism by the solvation parameter model. A qualitative picture of the above solvent effects, compatible with current knowledge of solvent and stationary phase properties, is presented.