A Microelectronic Sensor Device Powered by a Small Implantable Biofuel Cell

Biocatalytic buckypaper electrodes modified with pyrroloquinoline quinone (PQQ)-dependent glucose dehydrogenase and bilirubin oxidase for glucose oxidation and oxygen reduction, respectively, were prepared for their use in a biofuel cell. A small (millimeter-scale; 2×3×2 mm³) enzyme-based biofuel cell was tested in a model glucose-containing aqueous solution, in human serum, and as an implanted device in a living gray garden slug (Deroceras reticulatum), producing electrical power in the range of 2–10 μW (depending on the glucose source). A microelectronic temperature-sensing device equipped with a rechargeable supercapacitor, internal data memory and wireless data downloading capability was specifically designed for activation by the biofuel cell. The power management circuit in the device allowed the optimized use of the power provided by the biofuel cell dependent on the sensor operation activity. The whole system (power-producing biofuel cell and power-consuming sensor) operated autonomously by extracting electrical energy from the available environmental source, as exemplified by extracting power from the glucose-containing hemolymph (blood substituting biofluid) in the slug to power the complete temperature sensor system and read out data wirelessly. Other sensor systems operating autonomously in remote locations based on the concept illustrated here are envisaged for monitoring different environmental conditions or can be specially designed for homeland security applications, particularly in detecting bioterrorism threats.     

A Biofuel Cell Based on Biocatalytic Reactions of Glucose on Both Anode and Cathode Electrodes

Biofuel cells based on electrocatalytic oxidation of NADH and reduction of H₂O₂ have been prepared using carbon fiber electrodes functionalized with graphene nano‐flakes. The electrochemical oxidation of NADH was catalyzed by Meldola's blue (MB), while the reduction of H₂O₂ was catalyzed by hemin, both catalysts were adsorbed on the graphene flakes due to their π‐π staking. In the next set of experiments, the MB‐ and hemin‐electrodes were additionally modified with glucose dehydrogenase (GDH) and glucose oxidase (GOx), respectively. The enzyme catalyzed reactions in the presence of glucose, NAD⁺ and O₂ resulted in the production of NADH and H₂O₂ in situ. The produced NADH and H₂O₂ were oxidized and reduced, respectively, at the bioelectrocatalytic electrodes, thus producing voltage and current generated by the biofuel cell. The enzyme‐based biofuel cells operated in a human serum solution modelling an implantable device powered from the natural biofluid. Finally, two enzyme‐based biofuel cell connected in series and operating in the serum solution produced electrical power sufficient for activation of an electronic watch used as an example device.     

Biofuel Cell Operating in Vivo in Rat

Biocatalytic electrodes made of buckypaper were modified with PQQ‐dependent glucose dehydrogenase on the anode and with laccase on the cathode. The enzyme modified electrodes were assembled in a biofuel cell which was first characterized in human serum solution and then the electrodes were placed onto exposed rat cremaster tissue. Glucose and oxygen dissolved in blood were used as the fuel and oxidizer, respectively, for the implanted biofuel cell operation. The steady‐state open circuitry voltage of 140±30 mV and short circuitry current of 10±3 µA (current density ca. 5 µA cm^?2 based on the geometrical electrode area of 2 cm²) were achieved in the in vivo operating biofuel cell. Future applications of implanted biofuel cells for powering of biomedical and sensor devices are discussed.     

Graphene as a spacer to layer-by-layer assemble electrochemically functionalized nanostructures for molecular bioelectronic devices

This study demonstrates the capability of graphene as a spacer to form electrochemically functionalized multilayered nanostructures onto electrodes in a controllable manner through layer-by-layer (LBL) chemistry. Methylene green (MG) and positively charged methylimidazolium-functionalized multiwalled carbon nanotubes (MWNTs) were used as examples of electroactive species and electrochemically useful components for the assembly, respectively. By using graphene as the spacer, the multilayered nanostructures of graphene/MG and graphene/MWNT could be readily formed onto electrodes with the LBL method on the basis of the electrostatic and/or π-π interaction(s) between graphene and the electrochemically useful components. Scanning electron microscopy (SEM), ultraviolet-visible spectroscopy (UV-vis), and cyclic voltammetry (CV) were used to characterize the assembly processes, and the results revealed that nanostructure assembly was uniform and effective with graphene as the spacer. Electrochemical studies demonstrate that the assembled nanostructures possess excellent electrochemical properties and electrocatalytic activity toward the oxidation of NADH and could thus be used as electronic transducers for bioelectronic devices. This potential was further demonstrated by using an alcohol dehydrogenase-based electrochemical biosensor and glucose dehydrogenase-based glucose/O(2) biofuel cell as typical examples. This study offers a simple route to the controllable formation of graphene-based electrochemically functionalized nanostructures that can be used for the development of molecular bioelectronic devices such as biosensors and biofuel cells.     

Biofuel cell controlled by enzyme logic network — Approaching physiologically regulated devices

A “smart” biofuel cell switchable ON and OFF upon application of several chemical signals processed by an enzyme logic network was designed. The biocomputing system performing logic operations on the input signals was composed of four enzymes: alcohol dehydrogenase (ADH), amyloglucosidase (AGS), invertase (INV) and glucose dehydrogenase (GDH). These enzymes were activated by different combinations of chemical input signals: NADH, acetaldehyde, maltose and sucrose. The sequence of biochemical reactions catalyzed by the enzymes models a logic network composed of concatenated AND/OR gates. Upon application of specific “successful” patterns of the chemical input signals, the cascade of biochemical reactions resulted in the formation of gluconic acid, thus producing acidic pH in the solution. This resulted in the activation of a pH-sensitive redox-polymer-modified cathode in the biofuel cell, thus, switching ON the entire cell and dramatically increasing its power output. Application of another chemical signal (urea in the presence of urease) resulted in the return to the initial neutral pH value, when the O₂-reducing cathode and the entire cell are in the mute state. The reversible activation–inactivation of the biofuel cell was controlled by the enzymatic reactions logically processing a number of chemical input signals applied in different combinations. The studied biofuel cell exemplifies a new kind of bioelectronic device where the bioelectronic function is controlled by a biocomputing system. Such devices will provide a new dimension in bioelectronics and biocomputing benefiting from the integration of both concepts.     

Engineering of glucose oxidase for direct electron transfer via site-specific gold nanoparticle conjugation

Optimizing the electrical communication between enzymes and electrodes is critical in the development of biosensors, enzymatic biofuel cells, and other bioelectrocatalytic applications. One approach to address this limitation is the attachment of redox mediators or relays to the enzymes. Here we report a simple genetic modification of a glucose oxidase enzyme to display a free thiol group near its active site. This facilitates the site-specific attachment of a maleimide-modified gold nanoparticle to the enzyme, which enables direct electrical communication between the conjugated enzyme and an electrode. Glucose oxidase is of particular interest in biofuel cell and biosensor applications, and the approach of "prewiring" enzyme conjugates in a site-specific manner will be valuable in the continued development of these systems.     

Cover Picture

The cover picture shows schematically the elements of the rapidly developing research fields of bioelectronics and optobioelectronics. Immobilization of redox enzymes as monolayers or thin films on conductive supports yields functionalized biocatalytic electrodes. The formation of electrical contact between the redox center of the enzyme and the electrode surface, which is possible in various ways, provides a means of assembling integrated enzyme electrodes for bioelectronic applications. Photoswitchable redox proteins assembled on electrode surfaces form the basis of optobioelectronic devices. A further element of bioelectronic and optobioelectronic systems is the possibility for the microscale patterning of biomaterials onto the solid supports-through photolithography, micromachining, and stamping. More on the different aspects of bioelectronics and optobioelectronics can be found in the review by I. Willner and E. Katz on page 1180 ff.[ Magnified Cover Picture ]     

A Biofuel Cell Based on Biocatalytic Reactions of Lactate on Both Anode and Cathode Electrodes – Extracting Electrical Power from Human Sweat

Electrodes composed of carbon fibers were modified with graphene nano‐sheets in order to increase their surface area and facilitate electrochemical reactions. Electrocatalytic species, such as Meldola's blue (MB) and hemin were immobilized on the graphene surface due to their π‐π stacking and then used for electrocatalytic oxidation of NADH and reduction of H₂O₂, respectively. Further modification of these electrodes with enzymes producing NADH and H₂O₂ in situ (lactate dehydrogenase, LDH, and lactate oxidase, LOx, respectively), allowed assembling of a biofuel cell operating in the presence of lactate, oxygen and NAD⁺. The cathode of the biofuel cell required lactate and O₂ for its operation, while the anode operated in the presence of lactate and NAD⁺. Notably, both bioelectrocatalytic electrodes operated in the presence of lactate, one producing H₂O₂ in the reaction catalyzed by LOx in the presence of O₂, second producing NADH in the reaction catalyzed by LDH in the presence of NAD⁺. Both reactions were performed in the biofuel cell without separation of the cathodic and anodic solutions and with no need of a membrane. The biofuel cell was tested in solutions mimicking human sweat and then in real human sweat samples, demonstrating substantial power release being able to activate electronic devices.     

Wireless Information Transmission System Powered by an Abiotic Biofuel Cell Implanted in an Orange

An “abiotic” biofuel cell composed of catalytic electrodes modified with inorganic nanoparticles (NPs) deposited on carbon black (CB) was used to activate a wireless information transmission system. The cathode and anode were made of carbon paper modified with Pt‐NPs/CB and buckypaper modified with Au₈₀Pt₂₀‐NPs/CB, respectively. The cathode/anode pair was implanted in orange pulp extracting power from its content (glucose and fructose in the juice). The open circuit voltage, V_oc, short circuit current density, j_sc, and maximum power produced by the biofuel cell, P_max, were found as 0.36 V, 1.3 mA cm^?2 and 182 µW, respectively. The voltage produced by the biofuel cell was amplified with an energy harvesting circuit and applied to a wireless transmitter. The present study continues the research line where different implantable biofuel cells are used for activation of electronic devices.     

Characteristics of a miniature compartment-less glucose-O2 biofuel cell and its operation in a living plant

We report the temperature, pH, glucose concentration, NaCl concentration, and operating atmosphere dependence of the power output of a compartment-less miniature glucose-O(2) biofuel cell, comprised only of two bioelectrocatalyst-coated carbon fibers, each of 7 micro m diameter and 2 cm length (Mano, N.; Mao, F.; Heller, A. J. Am. Chem. Soc. 2002, 124, 12962). The bioelectrocatalyst of the anode consists of glucose oxidase from Aspergillus niger electrically "wired" by polymer I, having a redox potential of -0.19 V vs Ag/AgCl. That of the cathode consists of bilirubin oxidase from Trachyderma tsunodae "wired" by polymer II having a redox potential of +0.36 V vs Ag/AgCl (Mano, N.; Kim, H.-H.; Zhang, Y.; Heller, A. J. Am. Chem. Soc. 2002, 124, 6480. Mano, N.; Kim, H.-H.; Heller, A. J. Phys. Chem. B 2002, 106, 8842). Implantation of the fibers in the grape leads to an operating biofuel cell producing 2.4 micro W at 0.52 V.     

Renewable dehydrogenase-based interfaces for bioelectronic applications

Bioelectronic interfaces that establish electrical communication between redox enzymes and electrodes have potential applications as biosensors, biocatalytic reactors, and biological fuel cells. However, these interfaces contain labile components, including enzymes and cofactors, which have limited lifetimes and must be replaced periodically to allow long-term operation. Current methods to fabricate bioelectronic interfaces do not allow facile replacement of these components, thus limiting the useful lifetime of the interfaces. In this paper we describe a versatile new fabrication approach that binds the enzymes and cofactors using reversible ionic interactions. This approach allows the interface to be removed via a simple pH change and then replaced to fully regenerate the biocatalytic activity. The positively charged polyelectrolyte poly(ethylenimine) was used to ionically bond a dehydrogenase enzyme and its cofactor to a gold electrode that was functionalized with 3-mercaptopropionic acid and the electron mediator toluidine blue O. By reducing the pH, the surface-bound 3-mercaptopropionic acid was protonated, disrupting the ionic bonds and releasing the enzyme-modified polyelectrolyte. After neutralization, fresh enzyme and cofactor were bound, regenerating the bioelectronic interface. Cyclic voltammetry, chronoamperometry, constant potential amperometry, electrochemical impedance spectroscopy, and Fourier transform infrared spectroscopy analyses were used to characterize the bioelectronic interfaces. For the two enzymes tested (secondary alcohol dehydrogenase and sorbitol dehydrogenase) and their respective cofactors (beta-nicotinamide adenine dinucleotide phosphate and beta-nicotinamide adenine dinucleotide), the reconstituted interface exhibited a surface coverage, an electron-transfer coefficient, and a turnover rate similar to those of the original interface.     

In situ and operando electrochemistry of redox enzymes

Understanding the biocatalytic or the interfacial electron transfer processes of redox enzymes is decisive to develop high-performance biofuel cells, mimetic catalysts, bioelectrosynthesis reactors, biosensors, and bioelectronic devices. The state-of-art of redox enzyme electrochemistry lies in using in situ and operando instrumentation, in which protein electrochemistry is resourcefully coupled to or hyphenated with numerous analytical techniques. Nevertheless, there is still a lot to research about the manipulation of redox proteins in the unusual sample holding environments, and bioelectrodes engineering emerges as a key. Here, we discuss these challenges in detail, focusing on contemporary instrumentation setups.     

Biocatalytic anode for glucose oxidation utilizing carbon nanotubes for direct electron transfer with glucose oxidase

Covalently linked layers of glucose oxidase, single-wall carbon nanotubes and poly-l-lysine on pyrolytic graphite resulted in a stable biofuel cell anode featuring direct electron transfer from the enzyme. Catalytic response observed upon addition of glucose was due to electrochemical oxidation of FADH₂ under aerobic conditions. The electrode potential depended on glucose concentration. This system has essential attributes of an anode in a mediator-free biocatalytic fuel cell.     

A glucose/hydrogen peroxide biofuel cell that uses oxidase and peroxidase as catalysts by composite bulk-modified bioelectrodes based on a solid binding matrix

An improved composite bulk-modified bioelectrode setup based on a solid binding matrix (SBM) has been used to develop a glucose/hydrogen peroxide biofuel cell. Fuel is combined through a catalytically promoted reaction with oxygen into and oxidized species and electricity. The present work explores the feasibility of a sugar-feed biofuel cell based on SBM technology. The biofuel cell that utilizes mediators as electron transporters from the glucose oxidation pathway of the enzyme directly to electrodes is considered in this work. The anode was a glucose oxidase (GOx, EC 1.1.3.4)/ferrocene-modified SBM/graphite composite electrode. The cathode was a horseradish peroxidase (HRP, EC 1.11.1.7)/ferrocene-modified SBM/graphite composite electrode. The composite transducer material was layered on a wide polymeric surface to obtain the biomodified electrodic elements, anodes and cathodes and were assembled into a biofuel cell using glucose and H(2)O(2) as the fuel substrate and the oxidizer. The electrochemical properties and the characteristics of single composite bioelectrodes are described. The open-circuit voltage of the cell was 0.22 V, and the power output of the cell was 0.15 microW/cm(2) at 0.021 V. The biofuel cell proved to be stable for an extended period of continuous work (30 days). The reproducibility of the biotransducers fabrication was also investigated. In addition, an application of presented biofuel cell, e.g. the use of hydrolyzed corn syrup as renewable biofuels, was discussed.     

Mitochondrial biofuel cells: expanding fuel diversity to amino acids

Although mitochondria have long been considered the powerhouse of the living cell, it is only recently that we have been able to employ these organelles for electrocatalysis in electrochemical energy conversion devices. The concept of using biological entities for energy conversion, commonly referred to as a biofuel cell, has been researched for nearly a century, but until recently the biological entities were limited to microbes or isolated enzymes. However, from the perspectives of efficient energy conversion and high volumetric catalytic activity, mitochondria may be a possible compromise between the efficiency of microbial biofuel cells and the high volumetric catalytic activity of enzymatic biofuel cells. This perspective focuses on comparing mitochondrial biofuel cells to other types of biofuel cells, as well as studying the fuel diversity that can be employed with mitochondrial biofuel cells. Pyruvate and fatty acids have previously been studied as fuels, but this perspective shows evidence that amino acids can be employed as fuels as well.     

Fabrication and characterization of buckypaper-based nanostructured electrodes as a novel material for biofuel cell applications

The fabrication process of buckypapers (BPs) made from stable suspensions of as-received or functionalized multi-walled carbon nanotubes (MWCNTs) with high purity (97.5 wt%, Baytubes), their characterization and their utilization towards novel biofuel cell electrode applications are reported. The BPs can vary in thickness between 1 μm and 200 μm, are mechanically robust, flexible, stable in solvents, possess high meso-porosities as well as high apparent electrical conductivities of up to 2500 S m(-1). Potentiodynamic measurements of biocathodes based on bilirubin oxidase (BOD)-decorated BPs for the oxygen reduction reaction (ORR) in neutral media (phosphate buffer solution) containing glucose indicate that BP electrodes based on functionalized MWCNTs (fBPs) perform better than BP electrodes of as-received MWCNTs and have high potential as an effective electrode material in biofuel cells and biosensors.     

Improved enzyme immobilization for enhanced bioelectrocatalytic activity of porous electrodes

Porous electrodes with increased surface area have been prepared using a template route via colloidal crystals. The ordered porous structure and the interconnections between the pores have been quantitatively characterized by Focused Ion Beam Tomography. The internal surfaces of the electrodes have been biofunctionalized with two enzymatic systems for glucose oxidation. In order to increase significantly the stability, the biocatalysts have been immobilized either by crosslinking or by incorporation in an electrodeposition paint. The modified porous electrodes show an increased overall signal and therefore a better detection limit and a higher sensitivity when used as sensors, and a potentially higher power output when employed in biofuel cells.     

An implantable biofuel cell for a live insect

A biofuel cell incorporating a bienzymatic trehalase|glucose oxidase trehalose anode and a bilirubin oxidase dioxygen cathode using Os complexes grafted to a polymeric backbone as electron relays was designed and constructed. The specific power densities of the biofuel cell implanted in a female Blaberus discoidalis through incisions into its abdomen yielded maximum values of ca. 55 μW/cm(2) at 0.2 V that decreased by only ca. 5% after ca. 2.5 h of operation.     

Bioinspired Artificial Photosynthetic Systems

Mimicking photosynthesis using artificial systems, as a means for solar energy conversion and green fuel generation, is one of the holy grails of modern science. This perspective presents recent advances towards developing artificial photosynthetic systems. In one approach, native photosystems are interfaced with electrodes to yield photobioelectrochemical cells that transform light energy into electrical power. This is exemplified by interfacing photosystem I (PSI) and photosystem II (PSII) as an electrically contacted assembly mimicking the native Z-scheme, and by the assembly of an electrically wired PSI/glucose oxidase biocatalytic conjugate on an electrode support. Illumination of the functionalized electrodes led to light-induced generation of electrical power, or to the generation of photocurrents using glucose as the fuel. The second approach introduces supramolecular photosensitizer nucleic acid/electron acceptor complexes as functional modules for effective photoinduced electron transfer stimulating the subsequent biocatalyzed generation of NADPH or the Pt-nanoparticle-catalyzed evolution of molecular hydrogen. Application of the DNA machineries for scaling-up the photosystems is demonstrated. A third approach presents the integration of artificial photosynthetic modules into dynamic nucleic acid networks undergoing reversible reconfiguration or dissipative transient operation in the presence of auxiliary triggers. Control over photoinduced electron transfer reactions and photosynthetic transformations by means of the dynamic networks is demonstrated.     

Concentric glucose/O2 biofuel cell

A concentric glucose/O₂ biofuel cell has been developed. The device is constituted of two carbon tubular electrodes, one in the other, and combines glucose electrooxidation at the anode and oxygen electroreduction at the cathode. The anodic catalyst is glucose oxidase co-immobilized with the mediator 8-hydroxyquinoline-5-sulfonic acid hydrate, and the cathodic catalyst is bilirubin oxidase co-immobilized with the mediator 2,2′-azinobis (3-ethylbenzothiazoline-6-sulfonate) diammonium salt. Both enzymes and mediators are entrapped at the surface of the tubular electrodes by an electrogenerated polypyrrole polymer. The originality of the concentric configuration is to compartmentalize the anode and cathode electrodes and to supply dissolved oxygen separate from the electrolyte in order to avoid secondary reactions. The dissolved oxygen circulates through the inside of the cathode tube and diffuses from the inner to the external surface of the tube to react directly with the immobilized bilirubin oxidase. The assembled biofuel cell is studied at 37 °C in phosphate buffer pH 7.4. We show the influence of the thickness of the polypyrrole polymer on the electrochemical activity of the biocathodes. We also demonstrate the effect of the chemical reticulation of the enzymes by glutaraldehyde within the polymer on the performances of the bioelectrodes. The maximum power density delivered by the assembled glucose/O₂ biofuel cell reaches 42 μW cm⁻², evaluated from the geometric area of the electrodes, at a cell voltage of 0.30 V with 10 mM glucose. The results demonstrate that the concentric design of the BFC based on compartmented electrodes is a promising architecture for further development of micro electronic devices.