Silicon nanowire radial p-n junction solar cells

We have demonstrated a low-temperature wafer-scale etching and thin film deposition method for fabricating silicon n-p core-shell nanowire solar cells. Our devices showed efficiencies up to nearly 0.5%, limited primarily by interfacial recombination and high series resistance. Surface passivation and contact optimization will be critical to improve device performance in the future.     

A series of dithienobenzodithiophene based small molecules for highly efficient organic solar cells

Three acceptor-donor-acceptor (A-D-A) small molecules DCAODTBDT, DRDTBDT and DTBDTBDT using dithieno[2,3-d:2′,3′-d′]benzo[1,2-b:4,5-b′]dithiophene as the central building block, octyl cyanoacetate, 3-octylrhodanine and thiobarbituric acid as the end groups were designed and synthesized as donor materials in solution-processed photovoltaic cells (OPVs). The impacts of these different electron withdrawing end groups on the photophysical properties, energy levels, charge carrier mobility, morphologies of blend films, and their photovoltaic properties have been systematically investigated. OPVs device based on DRDTBDT gave the best power conversion efficiency (PCE) of 8.34%, which was significantly higher than that based on DCAODTBDT (4.83%) or DTBDTBDT (3.39%). These results indicate that rather dedicated and balanced consideration of absorption, energy levels, morphology, mobility, etc. for the design of small-molecule-based OPVs (SM-OPVs) and systematic investigations are highly needed to achieve high performance for SM-OPVs.     

The evolution of organic materials for efficient dye-sensitized solar cells

In the past three decades, dye-sensitized solar cells (DSSCs) have gained increased recognition as a potential substitute for inexpensive photovoltaic (PV) devices, and their maximum efficiency has grown from 7% to 14.3%. Recent developments in DSSCs have attracted a plethora of research activities geared at realizing their full potential. DSSCs have seen a revival as the finest technology for specific applications with unique features such as low-cost, non-toxic, colourful, transparent, ease of fabrication, flexibility, and efficient indoor light operation. Several organic materials are being explored and employed in DSSCs to enhance their performance, robustness, and lower production costs to be viable alternatives in the solar cell markets. This review provides a concise summary of the developments in the field over the past decade, with a special focus on the incorporation of organic materials into DSSCs. It covers all elements of the DSSC technology, including practical approaches and novel materials. Finally, the emerging applications of DSSCs, and their future promise are also discussed.     

Novel organic dyes for efficient dye-sensitized solar cells

Two novel metal-free organic dyes containing thienothiophene and thiophene segments have been synthesized. Nano-crystalline TiO2 dye-sensitized solar cells were fabricated using these dyes as light-harvesting sensitizers, and a high solar energy-to-electricity conversion efficiency of 6.23% was achieved.     

Phenothiazine derivatives for efficient organic dye-sensitized solar cells

Novel organic dyes based on the phenothiazine (PTZ) chromophore were designed and synthesized for dye-sensitized solar cells, which give solar energy-to-electricity conversion efficiency (eta) of up to 5.5% in comparison with the reference Ru-complex (N3 dye) with an eta value of 6.2% under similar experimental conditions.     

A highly efficient organic sensitizer for dye-sensitized solar cells

We have synthesized a highly efficient organic dye for a dye-sensitized solar cell; the overall solar-to-energy conversion efficiency was 9.1% at AM 1.5 illumination (100 mW cm(-2)): short-circuit current density (J(sc)) = 18.1 mA cm(-2), open circuit photovoltage (V(oc)) = 743 mV and fill factor (ff) = 0.675.     

5-Phenyl-iminostilbene based organic dyes for efficient dye-sensitized solar cells

Four new 5-phenyl-iminostilbene dyes (ISB-3–6) containing electron-withdrawing benzo-[c][1,2,5]thiadiazole have been designed and synthesized for use as DSSCs. Their absorption properties and electrochemical and photovoltaic performances have been investigated systematically. Among these dyes, DSSCs based on a dye containing benzo-[c][1,2,5]thiadiazole and benzene moieties (ISB-4) showed the best performance: a short-circuit photocurrent density (J_sc) of 13.69 mA cm⁻², an open-circuit photovoltage (V_oc) of 722 mV, and a fill factor (FF) of 0.71, which corresponds to a power conversion efficiency (PCE) of 6.71%, under optimized conditions. Additionally, long-term stability of the ISB-4 based DSSCs with ionic-liquid electrolytes was demonstrated under 1000 h of light soaking, the photovoltaic performance is up to 5.75%. The results suggest that 5-phenyl-iminostilbene containing dyes are promising candidates for application in DSSCs.     

Macrocyclic triphenylamine based organic dyes for efficient dye-sensitized solar cells

A novel class of organic D-π-A dyes employing macrocyclic triphenylamine dimer as electron donor was designed and synthesized for dye-sensitized solar cells. The prepared compounds showed high chemical and elelctrochemical stabilities as well as good long-wave absorption. Photovoltaic devices based on these dyes showed high open circuit voltage (higher than that of N3) and achieved a solar energy to electricity conversion efficiency of 6.31%. All the performances indicate the dyes containing macrocyclic triphenylamine dimer is a good candidate for dyes sensitized solar cells.     

Organic redox couples and organic counter electrode for efficient organic dye-sensitized solar cells

A series of organic thiolate/disulfide redox couples have been synthesized and have been studied systematically in dye-sensitized solar cells (DSCs) on the basis of an organic dye (TH305). Photophysical, photoelectrochemical, and photovoltaic measurements were performed in order to get insights into the effects of different redox couples on the performance of DSCs. The polymeric, organic poly(3,4-ethylenedioxythiophene) (PEDOT) material has also been introduced as counter electrode in this kind of noniodine-containing DSCs showing a promising conversion efficiency of 6.0% under AM 1.5G, 100 mW·cm(-2) light illumination. Detailed studies using electrochemical impedance spectroscopy and linear-sweep voltammetry reveal that the reduction of disulfide species is more efficient on the PEDOT counter electrode surface than on the commonly used platinized conducting glass electrode. Both pure and solvated ionic-liquid electrolytes based on a thiolate anion have been studied in the DSCs. The pure and solvated ionic-liquid-based electrolytes containing an organic redox couple render efficiencies of 3.4% and 1.2% under 10 mW·cm(-2) light illumination, respectively.     

Theoretical characterization and design of small molecule donor material containing naphthodithiophene central unit for efficient organic solar cells

To seek for high‐performance small molecule donor materials used in heterojunction solar cell, six acceptor–donor–acceptor small molecules based on naphtho[2,3‐b:6,7‐b′]dithiophene ( NDT ) units with different acceptor units were designed and characterized using density functional theory and time‐dependent density functional theory. Their geometries, electronic structures, photophysical, and charge transport properties have been scrutinized comparing with the reported donor material NDT(TDPP)₂ ( TDPP = thiophene‐capped diketopyrrolopyrrole). The open circuit voltage (V_oc), energetic driving force(ΔE_L‐L), and exciton binding energy (E_b) were also provided to give an elementary understanding on their cell performance. The results reveal that the frontier molecular orbitals of 3–7 match well with the acceptor material PC₆₁BM , and compounds 3–5 were found to exhibit the comparable performances to 1 and show promising potential in organic solar cells. In particular, comparing with 1 , system 7 with naphthobisthiadiazole acceptor unit displays broader absorption spectrum, higher V_oc, lower E_b, and similar carrier mobility. An in‐depth insight into the nature of the involved excited states based on transition density matrix and charge density difference indicates that all S₁ states are mainly intramolecular charge transfer states with the charge transfer from central NDT unit to bilateral acceptor units, and also imply that the exciton of 7 can be dissociated easily due to its large extent of the charge transfer. In a word, 7 maybe superior to 1 and may act as a promising donor candidate for organic solar cell. © 2013 Wiley Periodicals, Inc.     

New A-A-D-A-A-type electron donors for small molecule organic solar cells

Two A-A-D-A-A-type molecules (BCNDTS and BDCDTS), where two terminal electron-withdrawing cyano or dicyanovinylene moieties are connected to a central dithienosilole core through another electron-accepting 2,1,3-benzothiadiazole block, have been synthesized, characterized, and employed as electron donors for small molecule organic solar cells. Vacuum-deposited bilayer and planar mixed heterojunction devices based on BCNDTS and fullerene acceptors (C(60) or C(70)) exhibited decent power conversion efficiencies of 2.3% and 3.7%, respectively.     

Co-sensitization of organic dyes for efficient ionic liquid electrolyte-based dye-sensitized solar cells

The co-sensitization of two organic dyes (SQ1 and JK2), which are complementary in their spectral responses, shows enhanced photovoltaic performance compared with that of an individual organic dye-sensitized solar cell. The power conversion efficiency of the co-sensitized organic dye solar cell based on the newly developed binary ionic liquid (solvent-free) electrolyte gives 6.4% under AM 1.5 sunlight at 100 mW/cm2 irradiation, which is higher than that of individual dye-sensitized solar cells. The incident monochromatic photon-to-current conversion efficiency (IPCE) of the co-sensitized solar cell shows typical absorption peaks at 530 and 650 nm corresponding to the two dyes and displays a broad spectral response over the entire visible spectrum with IPCE of >40% in the 400-700 nm wavelength domain.     

Spatial control of p-n junction in an organic light-emitting electrochemical transistor

Low-voltage-operating organic electrochemical light-emitting cells (LECs) and transistors (OECTs) can be realized in robust device architectures, thus enabling easy manufacturing of light sources using printing tools. In an LEC, the p-n junction, located within the organic semiconductor channel, constitutes the active light-emitting element. It is established and fixated through electrochemical p- and n-doping, which are governed by charge injection from the anode and cathode, respectively. In an OECT, the electrochemical doping level along the organic semiconducting channel is controlled via the gate electrode. Here we report the merger of these two devices: the light-emitting electrochemical transistor, in which the location of the emitting p-n junction and the current level between the anode and cathode are modulated via a gate electrode. Light emission occurs at 4 V, and the emission zone can be repeatedly moved back and forth within an interelectrode gap of 500 μm by application of a 4 V gate bias. In transistor operation, the estimated on/off ratio ranges from 10 to 100 with a gate threshold voltage of -2.3 V and transconductance value between 1.4 and 3 μS. This device structure opens for new experiments tunable light sources and LECs with added electronic functionality.     

Asymmetric molecular engineering in recent nonfullerene acceptors for efficient organic solar cells

Nonfullerene acceptors (NFAs), which usually possess symmetric skeletons, have drawn great attention in recent years due to their pronounced advantages over the fullerene counterparts. Moreover, breaking the symmetry of NFAs could fine tune the molecular dipole, solubility, energy level, intermolecular interaction, molecular packing, crystallinity, etc., and give rise to improved photovoltaic performance. Currently, there are three main strategies for the design of asymmetric NFAs. This review highlights the recent advances of high-performance asymmetric NFAs and briefly outlooks the materials exploration for the future.     

Impact of symmetry-breaking of non-fullerene acceptors for efficient and stable organic solar cells

The concurrent enhancement of short-circuit current (J_SC) and open-circuit voltage (V_OC) is a key problem in the preparation of efficient organic solar cells (OSCs). In this paper, we report efficient and stable OSCs based on an asymmetric non-fullerene acceptor (NFA) IPC-BEH-IC2F. The NFA consists of a weak electron-donor core dithienothiophen[3,2-b]-pyrrolobenzothiadiazole (BEH) and two kinds of strong electron-acceptor (A) units [9H-indeno[1,2-b]pyrazine-2,3-dicarbonitrile (IPC) with a tricyclic fused system and 2-(5,6-difluoro-3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile (IC2F)]. For comparison, the symmetric NFAs IPC-BEH-IPC and IC2F-BEH-IC2F were characterised. The kind of flanking A unit significantly affects the light absorption features and electronic structures of the NFAs. The asymmetric IPC-BEH-IC2F has the highest extinction coefficient among the three NFAs owing to its strong dipole moment and highly crystalline feature. Its highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) levels lie between those of the IPC-BEH-IPC and IC2F-BEH-IC2F molecules. The IPC group also promotes molecular packing through the tricyclic π-conjugated system and achieves increased crystallinity compared to that of the IC2F group. Inverted-type photovoltaic devices based on p-type polymer:NFA blends with PBDB-T and PM6 polymers as p-type polymers were fabricated. Among all these devices, the PBDB-T:IPC-BEH-IC2F blend device displayed the best photovoltaic properties because the IPC unit provides balanced electronic and morphological characteristics. More importantly, the PBDB-T:IPC-BEH-IC2F-based device exhibited the best long-term stability owing to the strongly interacting IPC moiety and the densely packed PBDB-T:IPC-BEH-IC2F film. These results demonstrate that asymmetric structural modifications of NFAs are an effective way for simultaneously improving the photovoltaic performance and stability of OSCs.

A 9H-indeno[1,2-b]pyrazine-2,3-dicarbonitrile (IPC) moiety in asymmetric non-fullerene acceptors promotes the formation of a densely packed crystalline structure, enabling efficient and long-term stable organic solar cells.     

Molecular design of novel indacenodithiophene-based organic dyes for efficient dye-sensitized solar cells applications

Indacenodithiophene (IDT)-based high-efficiency photovoltaics have received increasing attention recently. This paper reports a density functional theory investigation of the electronic and optical properties of three IDT-based organic dyes together with the dye/(TiO₂)₄₆ interface. In order to enhance the photoelectric properties of IDT dyes, this paper considers two methods for the structure modification of the experimentally reported dye DPInDT (J. Org. Chem. 2011, 76, 8977): the extension of the conjugation length by dithienothiophene as well as the heteroatom substitution of the bridging atoms by electron-rich nitrogen atoms. Our calculations show that both methods obviously affect the distributions of the molecular orbitals and notably red shift the absorption peaks of around 20 nm, with the former method demonstrating enhanced light harvesting efficiency. The structure modifications proposed also enhance the emission spectrum properties for IDT-based organic dyes. The calculated ultrafast injection time of electrons from the excited state of IDT dyes to the (TiO₂)₄₆ belongs to the femtosecond order of magnitude, and is ideal for efficient photoelectric conversion process in dye-sensitized solar cells (DSSCs) applications. The IDT dyes designed in this paper have good electronic and spectroscopic properties. This study is expected to provide useful guidance for the development of novel IDT dyes for applications in DSSCs.     

Designs and understanding of small molecule-based non-fullerene acceptors for realizing commercially viable organic photovoltaics

Organic photovoltaics (OPVs) have emerged as a promising next-generation technology with great potential for portable, wearable, and transparent photovoltaic applications. Over the past few decades, remarkable advances have been made in non-fullerene acceptor (NFA)-based OPVs, with their power conversion efficiency exceeding 18%, which is close to the requirements for commercial realization. Novel molecular NFA designs have emerged and evolved in the progress of understanding the physical features of NFA-based OPVs in relation to their high performance, while there is room for further improvement. In this review, the molecular design of representative NFAs is described, and their blend characteristics are assessed via statistical comparisons. Meanwhile, the current understanding of photocurrent generation is reviewed along with the significant physical features observed in high-performance NFA-based OPVs, while the challenging issues and the strategic perspectives for the commercialization of OPV technology are also discussed.

This review describes the current understandings and the significant features observed in NFA-based OPVs, with a particular focus on photophysical, electrical, and morphological characteristics.     

The consequences of kesterite equilibria for efficient solar cells

Copper-zinc-tin-chalcogenide kesterites, Cu(2)ZnSnS(4) and Cu(2)ZnSnSe(4) (CZTS(e)) are ideal candidates for the production of thin film solar cells on large scales due to the high natural abundance of all constituents, a tunable direct band gap ranging from 1.0 to 1.5 eV, a large absorption coefficient, and demonstrated power conversion efficiencies close to 10%. However, Sn losses through desorption of SnS(e) from CZTS(e) at elevated temperatures (above 400 °C) impede the thorough control of film composition and film homogeneity. No robust and feasible fabrication process is currently available. Here we show that understanding the formation reaction of the kesterite absorber is the key to control the growth process and to drastically improve the solar cell efficiency. Furthermore, we demonstrate that this knowledge can be used to simplify the four-dimensional parameter space (spanned by the four different elements) to an easy and robust two-dimensional process. Sufficiently high partial pressures of SnS(e) and S(e) (a) prevent the decomposition reaction of the CZTS(e) at elevated temperatures and (b) introduce any missing Sn into a Sn-deficient film. This finding enables us to simplify the precursor to a film containing only Cu and Zn, whereas Sn and S(e) are introduced from the gas phase by a self-regulating process.     

Simple organic molecules bearing a 3,4-ethylenedioxythiophene linker for efficient dye-sensitized solar cells

3,4-Ethylenedioxythiophene and bis[2-(2-methoxyethoxy)ethoxy]thiophene bridged donor-acceptor molecules for dye-sensitized solar cells have been synthesized, one of which achieved a solar-to-energy conversion efficiency of 7.3%, compared to 7.7% optimized for N719 dye.