乙酰葡萄糖氧代金属卟啉的合成及其对环己烷羟基化反应的催化作用

由吡咯和葡萄糖取代苯甲醛直接缩合制备了两种葡萄糖取代卟吩:四(邻位乙酰葡萄糖氧代苯基)卟吩和四(间位乙酰葡萄糖氧代苯基)卟吩,进一步金属化合成了4种葡萄糖金属卟啉:氯化四(邻位乙酰葡萄糖氧代苯基)卟吩合铁、氯化四(间位乙酰葡萄糖氧代苯基)卟吩合铁、氯化四(邻位四乙酰葡萄糖氧代苯基)卟吩合锰和氯化四(间位乙酰葡萄糖氧代苯基)卟吩合锰.它们的结构由紫外-可见光谱、核磁共振和元素分析证实.研究了这些葡萄糖取代金属卟啉对亚碘酰苯常温常压下氧化环己烷反应的催化作用.研究结果表明,4种糖基金属卟啉催化下的环己烷反应产率和反应速率都比一般金属卟啉高.反应动力学分析表明,在常温常压下,糖基金属卟啉催化下的环己烷氧化反应具有酶催化反应的动力学关系.     

金属卟啉催化环己烷羟基化反应中环己酮的形成机理研究

单金属卟啉和双金属卟啉催化下PhIO常温氧化环己烷的羟基化反应中金属卟啉结构和反应溶剂、反应温度、反应时间等环境因素对产物酮含量及酮形成反应动力学的影响进行了系统研究, 并与金属卟啉催化下PhIO氧化环己醇的反应进行了对比, 提出了金属卟啉催化下环己烷羟基化反应中产物酮的形成机理。     

Immobilization of anionic iron(III) porphyrins onto in situ obtained zinc oxide

A family of anionic iron(III) porphyrins (FePor) was immobilized onto zinc oxide (ZnO) obtained by the in situ hydrothermal decomposition of zinc hydroxide nitrate, a layered hydroxide salt. The immobilization probably occurred via the interaction between the anionic charges on the porphyrins and the positively charged surface of the ZnO, in slightly acidic to neutral pH. The resulting solids were characterized by transmission electron microscopy (TEM), X-ray powder diffraction (XRDP), Fourier transform infrared spectroscopy (FTIR), electron paramagnetic resonance (EPR), and ultraviolet-visible spectroscopy (UV-Vis) (solid samples), which confirmed the formation of ZnO and the immobilization of the FePor. The prepared materials were employed as catalysts for the heterogeneous catalytic oxidation of cyclooctene, cyclohexane, and n-heptane, using iodosylbenzene as the oxygen donor. Good catalytic results were achieved for all the substrates, and selectivity for the alcohol was verified during the oxidation of alkanes. The reuse capacity of the solid catalyst was also investigated.     

高分子多糖载体对四苯基金属卟啉催化性能影响

在壳聚糖四苯基金属卟啉中, 氨基或羟基可能对金属卟啉的稳定性和催化活性起重要作用. 为探索这两类基团的作用效果差异, 并调查具有类似壳聚糖结构的纤维素作为载体, 对金属卟啉的保护以及羟基的协助催化作用, 制备了纤维素四苯基铁、钴和锰卟啉. 研究了纤维素四苯基铁、钴和锰卟啉催化空气氧化环己烷的能力, 并与相应的壳聚糖金属卟啉比较. 在418 K和0.8 MPa的空气压力下, 纤维素四苯基铁(钴或锰)卟啉均只能作一次性催化而耗尽; 所获得的醇酮选择性均低于相应的壳聚糖四苯基金属卟啉. 研究结果表明: 纤维素对四苯基铁、钴和锰卟啉没有明显的保护作用, 羟基对其催化环己基过氧化氢的协助分解作用也比较小. 壳聚糖对金属卟啉有很强的保护作用, 氨基有较强的协助金属卟啉催化环己基过氧化氢分解的能力, 使醇酮选择性提高.     

金属次卟啉二甲酯对空气氧化环己烷的催化作用

在无任何外加溶剂及共还原剂的条件下, 将金属次卟啉二甲酯应用于催化空气氧化环己烷的氧化反应. 结果表明, 金属次卟啉二甲酯能够很好地催化环己烷的氧化反应, 与简单的金属四苯基卟啉相比, 金属次卟啉二甲酯催化剂具有更高的催化活性. 进而研究了络合金属对其催化性能的影响.     

咪唑修饰硅胶配位固载锰(Ⅲ)卟啉对环己烷空气氧化的催化作用

应用3-氯丙基三甲氧基硅烷和咪唑成功地对硅胶表面进行了修饰,并通过咪唑基纵轴配位方式固载了四苯基锰(Ⅲ)卟啉.在无任何外加溶剂及共还原剂的条件下,应用此高分子金属卟啉作为催化剂,选择性地催化空气氧化环己烷为环己酮和环己醇.研究结果表明,与未固载金属卟啉相比,固载金属卟啉具有更高的催化活性和催化选择性,反应具有更高的酮醇比,催化剂的稳定性有了较大的提高,便于回收和重复使用.另外还探讨了载体在此催化体系中对催化性能的影响.     

铁(Ⅲ)-柠檬酸盐配合物光解引发橙黄Ⅱ的脱色

介绍了金属卟啉化合物的结构、种类及其应用，综述了金属卟啉化合物对烷烃的仿生催化氧化研究进展。运用金属卟啉仿生催化空气氧化环己烷制备环己酮技术，使得停留在实验室研究水平的金属卟啉仿生催化烷烃空气氧化进入了工业化生产。     

单取代杂多化合物在以分子氧为氧化剂的环己烯氧化反应中的催化作用

单取代杂多化合物在以分子氧为氧化剂的环己烯氧化反应中的催化作用秦笃捷,王国甲,吴越（吉林大学化学系,长春,１３００２３）关键词杂多化合物,环己烯,催化氧化单取代杂多化合物作为＂卟啉无机同系物＂而用于均相及相转移催化已引起人们的关注［１～３］．由于这类...     

磁场对铁卟啉仿生催化性能的影响

在生命体中,细胞色素P－450单充氧酶辅基是具有铁Df琳结构的血红素．用金属叶琳作为细胞色素P－450单充氧酶的模型化合物探讨和研究人类生命现象一直是国内外化学仿生催化领域极为感兴趣的研究内容之一［’1．我们曾用p一氧代双铁叶琳作为细胞色素P－450单充氧酶的模型化合物,发现改变金属叶琳结构和金属原子电子自旋态将会引起金属叶琳磁性改变,而金属叶琳磁性改变会进一步导致金属叶琳仿生催化性能发生改变D”‘．我们认为,这一现象与人类和地球构成的生物圈可能有某些关联．为了考察地球磁场对人类生命现象的影响,我们进一步建立…     

Preparation of heterogeneous cationic metalloporphyrin/heteropolyanion composite catalysts and their high catalytic activity in hydroxylation of cyclohexane with molecular oxygen

A new route to improve the metalloporphyrin catalysts is developed, and it is to constitute heterogeneous composite catalysts with immobilized cationic metalloporphyrins and heteropolyanions. By using the method of synchronously synthesizing and immobilizing porphyrins on cross-linked polystyrene microspheres (CPS microspheres), the immobilized porphyrin TAPP-CPS microspheres, on which ternary amine (TA) group-containing phenyl porphyrin (PP) was immobilized, were first prepared, and then the immobilized cationic porphyrin TMPP-CPS microspheres, in whose structure trimethylammoniophenyl porphyrin (TMPP) was contained, were obtained via quaternization reaction. Finally, three immobilized metalloporphyrins, CoTMPP-CPS (shorten as CoP-CPS), MnTMPP-CPS (MnP-CPS) and FeTMPP-CPS (FeP-CPS), were gained through coordination reactions. These immobilized metalloporphyrins were composited with heteropolyanions by right of the mutual electrostatic interaction with phosphotungstic (PW) acid and phosphomolybdic (PMo) acid as reagents, respectively, resulting in several heterogeneous metalloporphyrin/heteropolyanion composite catalysts such as CoPPW-CPS, CoPPMo-CPS and MnPPW-CPS. The composite catalysts were used in the catalytic hydroxylation reaction of cyclohexane with molecular oxygen as oxidant, and their catalytic performances were investigated. The experimental results show that the heterogeneous composite catalysts have extraordinarily high catalytic activity in the hydroxylation reaction of cyclohexane by molecular oxygen, and the cyclohexanol yield in 8 h can get up to 45.5 %. More importantly, the catalytic activity of the heterogeneous composite catalysts is obviously higher than that of the immobilized cationic metalloporphyrins, and the enhanced catalytic activity is originated from a protection of heteropolyanions against the deactivation of metalloporphyrins.     

Synthesis and catalytic activities in cyclohexane hydroxylation of metalloporphyrins supported on styrene-methylacrylic acid copolymer microspheres

Through a new synthetic strategy, metalloporphyrins (M = Fe(III), Mn(III) or Co(II)) were covalently immobilized on styrene-methylacrylic acid copolymer microspheres. These copolymer-immobilized metalloporphyrins were found to be more efficient catalysts than the analogous non-supported metalloporphyrins for cyclohexane hydroxylation in metalloporphyrin–O₂–ascrobate mixtures. The catalytic activities of the immobilized catalysts follow the order Fe>Mn>Co.     

First insight into catalytic activity of anionic iron porphyrins immobilized on exfoliated layered double hydroxides

Mg-Al layered double hydroxide (LDH) intercalated with glycinate anions was synthesized through co-precipitation and exfoliated in formamide and the single-layer suspension was reacted with aqueous iron porphyrin solutions (Fe(TDFSPP) and Fe(TCFSPP)). The obtained materials were characterized by X-ray powder diffraction, UV-vis, and electron paramagnetic resonance and investigated in the oxidation reaction of cyclooctene and cyclohexane using iodosylbenzene as oxidant. The iron porphyrin seems to be immobilized at the surface of the glycinate intercalated LDH. The catalytic activities obtained in heterogeneous media for iron porphyrin, Fe(TDFSPP), was superior to the results obtained under homogeneous conditions, but the opposite effect was observed on the Fe(TCFSPP), indicating that, instead of the structural similarity of both iron porphyrins (second-generation porphyrins), the immobilization of each one produced different catalysts. The best catalytic activity of the Fe(TDFSPP)/Gly-LDH, compared to Fe(TCFSPP)/Gly-LDH, can be explained by the easy access of the oxidant and the substrate to the catalytic sites in the former, probably located at the surface of the layered double hydroxide pillared with glycinate anions. A model for the immobilization and a mechanism for the oxidation reaction will be discussed.     

Study of the catalytic behavior of montmorillonite/iron(III) and Mn(III) cationic porphyrins

Two samples of montmorillonite (one of Brazilian origin, BNC1 clay, and the other STX-1, supplied by the Clay Mineral Society Repository (University of Missouri, USA) were allowed to react with biomimetic metalloporphyrins of Fe(III) and Mn(III) in cationic form. The compounds were characterized by several techniques, showing that the metalloporphyrins molecules were adsorbed at the surface of the clay platelet crystals. The catalytic activities of the intercalated complexes for the oxidation of alkane were dependent upon the concentration of the porphyrin immobilized in the clay and factors such as the metal ion species in the porphyrins, choice of solvent, and concentration of the iodosylbenzene oxidant. Good selectivity to cyclohexanol instead of cyclohexanone was observed for the catalytic oxidation of cyclohexane by iodosylbenzene.     

金属卟啉催化下环己烷羟基化反应中的Hammett关系

合成了40个卟啉环上具有不同取代基的单铁、锰卟啉和u-氧桥连双铁、锰卟啉,研究了这些金属卟啉模拟细胞色素P－450单充氧酶在温和条件下催化环己烷羟基化的反应.首次用线性自由能关系对金属卟啉仿生催化反应和金属卟啉自氧化反应进行相关分析,获得一些新的结果和规律.在此基础上,对金属卟啉仿生催化反应的可能机理进行了探讨.     

Self-assembled 3D heterometallic Cu(II)/Fe(II) coordination polymers with octahedral net skeletons: structural features, molecular magnetism, thermal and oxidation catalytic properties

The new three-dimensional (3D) heterometallic Cu(II)/Fe(II) coordination polymers [Cu(6)(H(2)tea)(6)Fe(CN)(6)](n)(NO(3))(2n)·6nH(2)O (1) and [Cu(6)(Hmdea)(6)Fe(CN)(6)](n)(NO(3))(2n)·7nH(2)O (2) have been easily generated by aqueous-medium self-assembly reactions of copper(II) nitrate with triethanolamine or N-methyldiethanolamine (H(3)tea or H(2)mdea, respectively), in the presence of potassium ferricyanide and sodium hydroxide. They have been isolated as air-stable crystalline solids and fully characterized including by single-crystal X-ray diffraction analyses. The latter reveal the formation of 3D metal-organic frameworks that are constructed from the [Cu(2)(μ-H(2)tea)(2)](2+) or [Cu(2)(μ-Hmdea)(2)](2+) nodes and the octahedral [Fe(CN)(6)](4-) linkers, featuring regular (1) or distorted (2) octahedral net skeletons. Upon dehydration, both compounds show reversible escape and binding processes toward water or methanol molecules. Magnetic susceptibility measurements of 1 and 2 reveal strong antiferromagnetic [J = -199(1) cm(-1)] or strong ferromagnetic [J = +153(1) cm(-1)] couplings between the copper(II) ions through the μ-O-alkoxo atoms in 1 or 2, respectively. The differences in magnetic behavior are explained in terms of the dependence of the magnetic coupling constant on the Cu-O-Cu bridging angle. Compounds 1 and 2 also act as efficient catalyst precursors for the mild oxidation of cyclohexane by aqueous hydrogen peroxide to cyclohexanol and cyclohexanone (homogeneous catalytic system), leading to maximum total yields (based on cyclohexane) and turnover numbers (TONs) up to about 22% and 470, respectively.     

Efficient catalytic oxidation of alkanes by Lewis acid/[Os(VI)(N)Cl4]- using peroxides as terminal oxidants. Evidence for a metal-based active intermediate

The oxidation of alkanes by various peroxides ((t)BuOOH, H2O2, PhCH2C(CH3)2OOH) is efficiently catalyzed by [Os(VI)(N)Cl4](-)/Lewis acid (FeCl3 or Sc(OTf)3) in CH2Cl2/CH3CO2H to give alcohols and ketones. Oxidations occur rapidly at ambient conditions, and excellent yields and turnover numbers of over 7500 and 1000 can be achieved in the oxidation of cyclohexane with (t)BuOOH and H2O2, respectively. In particular, this catalytic system can utilize PhCH2C(CH3)2OOH (MPPH) efficiently as the terminal oxidant; good yields of cyclohexanol and cyclohexanone (>70%) and MPPOH (>90%) are obtained in the oxidation of cyclohexane. This suggests that the mechanism does not involve alkoxy radicals derived from homolytic cleavage of MPPH but is consistent with heterolytic cleavage of MPPH to produce a metal-based active intermediate. The following evidence also shows that no free alkyl radicals are produced in the catalytic oxidation of alkanes: (1) The product yields and distributions are only slightly affected by the presence of O2. (2) Addition of BrCCl3 does not affect the yields of cyclohexanol and cyclohexanone in the oxidation of cyclohexane. (3) A complete retention of stereochemistry occurs in the hydroxylation of cis- and trans-1,2-dimethylcyclohexane. The proposed mechanism involves initial O-atom transfer from ROOH to [Os(VI)(N)Cl4](-)/Lewis acid to generate [Os(VIII)(N)(O)Cl4](-)/Lewis acid, which then oxidizes alkanes via H-atom abstraction.     

络合剂和添加剂对化学镀铜影响的电化学研究

以CuSO4·5H2O作主盐,乙二胺四乙酸二钠盐(Na2EDTA)作主络合剂,三乙醇胺(TEA)作辅助络合剂,2,2′＿联吡啶(dipyridine)作添加剂,组成化学镀铜液体系,研究络合剂、添加剂对该镀液电化学极化性能的影响,并结合化学沉积速率考察TEA和2,2′＿联吡啶对镀液性能的影响.     

Synthesis and characterization of tungstophosphoric acid-modified mesoporous sponge-like TUD-1 materials

Mesoporous sponge-like siliceous materials (TUD-1) were synthesized using TEOS (tetraethylorthosilicate) as a precursor of silica and TEA (triethanolamine) as a mesostructure-directing agent. Different TEOS/TEA molar ratios and hydrotreatment times were used, and their influence on the textural and morphological properties of the solids was evaluated. They were characterized by transmission electron microscopy (TEM), X-ray diffraction, and N₂ adsorption/desorption isotherm analysis. By changing the TEOS/TEA molar ratio, micro-mesoporous and mesoporous (with a narrow or wide pore size distribution) materials were obtained. The increment of hydrotreatment times increased the average pore size of TUD-1 and significantly reduced the specific surface area. TEM images showed that the solids were formed by agglomerates of rather spherical particles whose size increased with the increment of the TEA amount used. The structure and morphology of TUD-1 solids modified with tungstophosphoric acid (TPA) were similar to those of the mesoporous silica used as support. Their diffraction patterns did not display any of the characteristic peaks of TPA or its more common hydrates, suggesting that TPA was well dispersed on the support as a noncrystalline phase. In addition, the characterization of all the solids impregnated with TPA by FT-IR and ³¹P NMR indicated the presence of undegraded [PW₁₂O₄₀]^3? and [H_3?XPW₁₂O₄₀]^X? species interacting electrostatically with the ≡Si–OH₂⁺ groups, and by potentiometric titration it was estimated that the solids presented very strong acid sites. The TUD-1 solids modified with TPA gave excellent yield in the solvent-free synthesis of 2,4,5-triphenyl-1H-imidazole, without formation of by-products resulting from competitive reactions or decomposition products. In summary, they are good candidates to be used in multicomponent reactions catalyzed by acids.

Open image in new window

     

[TPPFe(III)]~2O的合成及其对细胞色素P-450的模拟

TPPFe(III)Cl通过中性Al~2O~3色谱柱得到一个新化合物, 它在HPLC中的保留时间比TPPFe(III)Cl大得多, IR、UV-Vis和元素分析表明, 这个新化合物是[TPPFe(III)]~2O. 同TPPFe(III)Cl一样, 它具有在常温常压下催化碳氢化合物单充氧化的性质。[TPPFe(III)]~2O催化下PhIO氧化环己烷的反应, 在CH~2Cl~2和环己烷介质中, 氧化产率分别为14.97和62.6%, 高于TPPFe(III)Cl作催化剂时的产率。在环己烷溶剂中, 反应产率与反应时间呈线性关系, 且反应有大约3小时诱导期。但在CH~2Cl~2溶剂中不存在反应产物与时间的线性关系, 也不存在诱导期。与TPPFe(III)Cl比较,[TPPFe(III)]~2O对氧化剂更稳定。上述事实表明, [TPPFe(III)]~2O能够作为细胞色素P-450的模型化合物。     

Efficient and selective oxidation of methyl substituted cycloalkanes by heterogeneous methyltrioxorhenium–hydrogen peroxide systems

Polymer-supported methyltrioxorhenium (MTO) systems are efficient catalysts for the oxidative functionalisation of cyclohexane and cyclopentane derivatives with H₂O₂ as oxygen donor. Using poly(4-vinyl)pyridine and poly(4-vinyl)pyridine-N-oxide as MTO supports, cycloalkanol, cycloalkanediol, cycloalkanone and ω-hydroxy methyl ketone derivatives were obtained in different yields depending on the experimental conditions. Interestingly, cycloalkane dimers were selectively recovered in acceptable to good yields when the oxidation was performed with polystyrene-microencapsulated MTO catalyst. The EPR investigation suggests that the homolytic cleavage of the CH₃–Re bond with formation of CH₃ radicals occurs inside the polystyrene capsule, indicating a possible role of methyl radical in the cycloalkane dimerisation pathway.