疏水缔合水溶性聚合物P(AM/NaAA/DiAC16)的合成与性能

以双烯丙基胺和1-溴代十六烷为原料合成了疏水单体N,N-双烯丙基十六胺,采取前加碱二元胶束共聚-后水解法合成了三元疏水缔合水溶性聚合物聚(丙烯酰胺/丙烯酸钠/N,N-双烯丙基十六胺)[P(AM/NaAA/DiAC16)],用FTIR、1H-NMR进行了结构表征;以芘为荧光探针,利用稳态荧光光谱法、粘度法研究了P(AM/NaAA/DiAC16)在水溶液的缔合行为.当x(DiAC16)=0.10～0.40 %时,在30℃、1mol·L-1NaCl溶液中,其Huggins常数KH小于0.80(144～0.294),表明稀溶液中缔合作用较弱.随聚合物浓度、疏水单体用量的增加,P(AM/NaAA/DiAC16)在二次蒸馏水中、1.000 mol·L-1 NaCl水溶液中,I1/I3值减少;在矿化度为19 334 μg/g盐水溶液中,水溶液的表观粘度增加、临界缔合浓度降低.结果表明,P(AM/NaAA/DiAC16)缔合行为取决于聚合物浓度、疏水单体用量及介质的极性.     

疏水缔合聚丙烯酰胺在表面活性单体胶束溶液中的制备及其流变特性

配制了表面活性单体2-丙烯酰胺基十二烷磺酸钠(NaAMC12S)与十二烷基硫酸钠(SDS)的胶束溶液,分别测定了强疏水单体N-正十二烷基丙烯酰胺(C12AM)在两种胶束溶液中的增溶性能;在此基础上,于两种胶束溶液中分别进行了丙烯酰胺(AM)与C12AM的胶束共聚合,制备了疏水缔合聚丙烯酰胺(HAPAM),它们分别为二元共聚物C12AM/AM与三元共聚物C12AM/NaAMC12S/AM;测定了两种共聚物的红外光谱;采用荧光探针法与表观粘度法重点研究了它们的疏水缔合性与流变性能.结果表明,在表面活性单体NaAMC12S的胶束溶液中,可顺利地实现AM与疏水单体的胶束共聚合,由于表面活性单体也参与了共聚合,故制得的产物为三元共聚物C12AM/NaAMC12S/AM;与在SDS胶束溶液中制备的二元共聚物C12AM/AM相比,前者的疏水缔合性更强,其强疏水缔合性以强疏水单体C12AM的贡献为主,以表面活性单体NaAMC12S的贡献为辅.     

聚(丙烯酰胺/丙烯酸钠/N,N-二辛基丙烯酰胺)与表面活性剂的相互作用

利用粘度法研究了孪尾疏水缔合水溶性聚(丙烯酰胺/丙烯酸钠/N,N-二辛基丙烯酰胺)[P(AM/NaAA/D iC8AM)]与表面活性剂十二烷基硫酸钠(SDS)、十六烷基三甲基溴化铵(CTAB)、壬基酚聚氧乙烯醚(OP-10)的相互作用。研究表明SDS、CTAB的加入,能显著地降低P(AM/NaAA/D iC8AM)水溶液的临界缔合浓度。表明P(AM/NaAA/D iC8AM)与SDS、CTAB的疏水缔合作用较强,而与OP-10的疏水缔合作用较弱。     

含孪尾型丙烯酰胺的HAPAM在新胶束聚合体系中的制备及其疏水缔合性

以表面活性单体2-丙烯酰胺基十二烷磺酸钠(NaAMC12S)为表面活性剂构建了新的胶束共聚合体系,实施了丙烯酰胺(AM)与N,N-二正十二烷基丙烯酰胺(DiC12AM)的胶束共聚合,制备了含孪尾型丙烯酰胺的疏水缔合聚丙烯酰胺(HAPAM),该聚合物为三元共聚物DiC12AM/NaAMC12S/AM.通过控制共聚合条件,制得了微结构系列变化的共聚物;采用红外光谱法表征了三元共聚物的化学结构,用荧光探针法与表观粘度法重点研究了共聚物DiC12AM/NaAMC12S/AM的大分子链微结构与其疏水缔合性的关系.结果表明:新胶束共聚合体系大大简化了胶束的共聚合操作,而且由于表面活性单体进入共聚物主链,使三元共聚物DiC12AM/NaAMC12S/AM具有更强的疏水缔合性.与由单尾型丙烯酰胺N-正十二烷基丙烯酰胺(C12AM)为疏水单体制备的HAPAM相比,由DiC12AM制得的HAPAM疏水缔合性更为显著.     

孪尾疏水缔合三元共聚物的粘度行为:水解度的影响

以十二烷基硫酸钠(SDS)为表面活性剂,利用氧化还原体系、采用前加碱共聚-共水解的方法制备了孪尾疏水缔合水溶性三元共聚物聚(丙烯酰胺／丙烯酸钠／N,N-二己基丙烯酰胺)[P(AM/NaAA／DiC6AM)],研究了P(AM／NaAA／DiC6AM)稀溶液及亚浓溶液的性能。随理论水解度的增加,P(AM／NaAA／DiC6AM)水溶液的特性粘数[η]增加,Huggins常数KH减小。P(AM／NaAA／DiC6AM)水溶液的表现粘度随理论水解度的增加而增加,随温度、剪切速率的增加而降低,随剪切速率的增加开始时降低较快而后变化较小。P(AM／NaAA/DiC6AM)在盐溶液中随NaCl、CaCl2质量浓度的增加,出现盐增粘现象;理论水解度不同的P(AM／NaAA／DiC6AM)与SDS水溶液的表现粘度在wSDS=0．050～0．400g／L范围内随SDS质量浓度的变化差别不大。     

环糊精功能化疏水缔合丙烯酰胺聚合物的制备与性能评价

以十六烷基二甲基烯丙基氯化铵(C₁₆DMAAC)为疏水单体、烯丙基环糊精(A-CD)为环糊精功能化单体,与丙烯酰胺(AM)通过自由基共聚作用制备了环糊精功能化疏水缔合丙烯酰胺聚合物P(AM/A-CD/C₁₆DMAAC)。采用红外光谱和电子扫描电镜对P(AM/A-CD/C₁₆DMAAC)的结构进行表征。并考察了聚合物的水溶性、粘浓性质、特性粘数和粘均分子量。发现聚合物具有良好的空间结构和溶解特性,临界缔合浓度为1600mg/L,粘均分子量达5.5×10⁶g/mol,聚合物具备作为三次采油的应用潜能。     

新一族疏水缔合聚丙烯酰胺NaAMC14S/AM与Gemini表面活性剂之间的相互作用

在水溶液中进行了表面活性单体丙烯酰胺基十四烷基磺酸钠(NaAMC14S)与丙烯酰胺(AM)的均相共聚合, 制备了具有微嵌段结构的疏水缔合聚丙烯酰胺NaAMC14S/AM, 合成了阳离子型Gemini表面活性剂二溴化-N,N′-二(二甲基十二烷基)己二铵(C12C6C12Br2), 采用表观粘度法和荧光探针法研究了共聚物NaAMC14S/AM与Gemini表面活性剂C12C6C12Br2的相互作用. 研究结果表明, 疏水缔合聚丙烯酰胺NaAMC14S/AM与Gemini表面活性剂C12C6C12Br2之间存在着很强的相互作用, 既存在静电相互作用, 又存在强烈的疏水相互作用, 表现在以下几方面: C12C6C12Br2的加入, 使共聚物NaAMC14S/AM在浓度小于其临界缔合浓度(cac)时即发生分子间的缔合; C12C6C12Br2在低于其临界胶束浓度时, 就与共聚物NaAMC14S/AM形成混合胶束; 当共聚物的浓度为0.30%(w)时, 随着C12C6C12Br2加入量的增多, 共聚物水溶液的粘度会发生大幅度的增加, 在最大值处粘度竟提高了3个数量级. 研究还发现, 共聚物NaAMC14S/AM与C12C6C12Br2之间的相互作用还与共聚物分子链中的疏水微嵌段含量有关, 疏水微嵌段含量越多, NaAMC14S/AM与C12C6C12Br2之间的相互作用越强, 溶液粘度增加的程度越大.     

疏水缔合水溶性聚合物——P(AM-NaAA-DiAC_8)的合成及其缔合性能

以双烯丙基胺和1-溴代辛烷为原料,合成了疏水单体N,N-双烯丙基辛胺(DiAC8).采取前加碱二元胶束共聚-共水解法合成了三元疏水缔合水溶性聚合物--聚(丙烯酰胺-丙烯酸钠-N,N-双烯丙基辛胺)[P(AM-NaAA-DiAC8)]. DiAC8和P(AM-NaAA-DiAC8)的结构经1H NMR和FT-IR表征.以芘为荧光探针,利用稳态荧光光谱法研究了P(AM-NaAA-DiAC8)在水溶液中的缔合行为,结果表明当r(DiAC8)=0.1%～1.4%时,随聚合物浓度、疏水单体用量的增加,P(AM-NaAA-DiAC8)在二次蒸馏水和1 mol·L-1NaCl水溶液中的Ⅰ1/Ⅰ3值减少.表明P(AM-NaAA-DiAC8)缔合行为取决于聚合物浓度、疏水单体用量及介质的极性.     

表活性单体NaAMCnS及其聚合物的合成及性能研究

针对疏水缔合聚合物水溶性不足的问题，本文合成了三种含烷基磺酸根的阴离子型表面活性单体2-丙烯酰胺基辛烷基磺酸钠（NaAMC₈S）、2-丙烯酰胺基十二烷基磺酸钠(NaAMC₁₂S)和2-丙烯酰胺基十八烷基磺酸钠(NaAMC₁₈S),通过氢谱、碳谱、高分辨质谱对其结构进行了表征。通过表面张力法和电导率法测定了NaAMC₈S和NaAMC₁₂S的临界胶束浓度；用荧光探针技术研究了其增溶作用；以偶氮二异丁脒盐酸盐（AIBA）为引发剂，在水溶液中研究了丙烯酰胺（AM）分别与NaAMC₈S、NaAMC₁₂S的二元共聚反应，通过控制AM与NaAMC₈S、NaAMC₁₂S的投料比制备得到两个系列聚合物P（AM/NaAMC₈S）、P(AM/NaAMC₁₂S),研究了表面活性单体含量对聚合物疏水缔合作用及耐温抗盐性能的影响。实验结果表明，NaAMC₈     

AM/DMC/C11AM疏水缔合聚两性电解质的合成、表征与溶液性质

通过Ritter反应合成弱阴离子型疏水单体丙烯酰胺基十一烷基酸(C11AM). 以丙烯酰胺(AM)、甲基丙烯酰氧乙基三甲基氯化铵(DMC)和丙烯酰胺基十一烷基酸(C11AM)为原料, 在水介质中合成新型疏水缔合聚两性电解质AM/DMC/C11AM. 利用1H NMR确证了疏水单体和共聚产物的分子结构. 流变性和芘荧光探针的研究结果表明, AM/DMC/C11AM系列疏水缔合聚两性电解质由于兼具疏水缔合性质和反聚电解质效应, 使其具有较好的耐盐性能.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.