Redox-Switchable Resorcin[4]arene Cavitands: Molecular Grippers

Diquinone-based resorcin[4]arene cavitands that open to a kite and close to a vase form upon changing their redox state, thereby releasing and binding guests, have been prepared and studied. The switching mechanism is based on intramolecular H-bonding interactions that stabilize the vase form and are only present in the reduced hydroquinone state. The intramolecular H-bonds were characterized using X-ray, IR, and NMR spectroscopies. Guests were bound in the closed, reduced state and fully released in the open, oxidized state.     

Zn(II)-induced conformational control of amphiphilic cavitands in langmuir monolayers

The reversible switching from the C(4v)-symmetric vase to the C(2v)-symmetric kite conformation of an amphiphilic resorcin[4]arene cavitand was induced by Zn(II) ion coordination. Langmuir monolayers were obtained of both conformers with the area per molecule increasing dramatically from 120 A(2) for the vase to 270 A(2) for the kite form. (1)H NMR spectroscopy in chloroform solution supports the formation of a stoichiometric kite-cavitand[radical dot](Zn(II))(2) complex, with the metal ions coordinating to pairs of neighbouring quinoxaline N-atoms.     

Hinged molecular capsules: synthesis and conformational control via temperature, pH, or solvent composition

Three new covalently linked molecular capsules were synthesized from their resorcinarene cavitand precursors in good yields. The capsules undergo reversible conformational switching between the closed "vase" form and the open "kite" form upon temperature or pH variation. The kite conformation obtained via either method in CDCl(3) switches to vase conformation upon addition of polar solvents such as acetone-d(6) or THF-d(8).     

NMR Investigations into the Vase‐Kite Conformational Switching of Resorcin[4]arene Cavitands

We report the detailed investigation of temperature‐ and pH‐triggered conformational switching of resorcin[4]arene cavitands 1 – 10 (Figs. 1, 8, and 9). Depending on the experimental conditions, these macrocycles adopt a vase conformation, featuring a deep cavity for potential guest inclusion, or two kite conformations (kite 1 and kite 2) with flat, extended surfaces (Schemes 1 and 2). The thermodynamic and kinetic parameters for the interconversion between these structures were determined by variable‐temperature NMR (VT‐NMR) spectroscopy (Figs. 2–7 and 10, and Tables 1 and 2). It was discovered that vase→kite switching of cavitands is strongly solvent‐dependent: it is controlled not only by solvent polarity but also by solvent size. Conformational interconversions similar to those of the parent structure 1 with four quinoxaline flaps are also observed when the octol base skeleton is differentially or incompletely bridged. Only octanitro derivative 2 was found to exist exclusively in the kite conformation under all experimental conditions. The detailed insight into the vase?kite conformational equilibrium gained in this investigation provides the basis for the design and construction of new, dynamic resorcin[4]arene cavitands that are switchable between bistable states featuring strongly different structures and functions.     

Water-stabilized cavitands

Tetrabenzimidazole cavitands 4 were prepared by condensation of ortho esters with octaamino cavitand 3 in 70-80% yield. Molecular modeling predicted that no intramolecular hydrogen bonds are possible between the imidazole fragments in the vase conformation of 4. Instead, this conformation provides four perfect binding sites for hydroxyl-containing molecules through an N-H---O-H---N pattern. Such interactions provide the means for sealing the cavitand's cavity. Accordingly, dry compounds 4 are not soluble in dry CDCl3 but readily dissolve upon addition of small amounts of alcohols or by saturation of the solution with water. 1H NMR spectroscopy revealed that in these solutions molecules 4 adopt a vase conformation while 1D GOESY experiments revealed their monomeric nature. In water-saturated CDCl3, these cavitands 4 form kinetically stable 1:1 inclusion complexes with tetramethylphosphonium bromide and triethylammonium chloride in which the cation is incorporated into the pi-basic cavity. Thus, cavitands 4 are a novel class of open-ended molecular containers capable of the formation of highly kinetically stable complexes upon assistance by hydrogen-bonding water molecules.     

Metal-switching and self-inclusion of functional cavitands

Cavitands bearing both eight (5) and two (13) metal-ligating carboxymethylphosphonate groups on their rims were synthesized by Arbuzov reaction of the corresponding bromoacetamido cavitands with trialkyl phosphites. These exist in the vase conformation in CDCl(3) and are stabilized by a cyclic seam of hydrogen bonds. This structure was also found in the solid state for the octabromoacetamide 4a and diphosphonate cavitand 13 by single-crystal X-ray analysis. Cavitands 5 and 13 form caviplexes in CDCl(3), CD(2)Cl(2), and alcohol solutions with adamantane derivatives 15a,b, quinuclidine 15d, ammonium and phosphonium salts 14, and drugs like ibuprofen 15c, all of which are stable on the NMR time scale at 295 K. NMR spectroscopy reveals that at 223 K octaphosphonate 5b exists in two forms: the major C(4)-symmetrical compound is filled with solvent while the minor species shows intramolecular inclusion of a dialkoxyphosphoryl group. In methanol-d(4) 5 and 13 exist in a lower symmetry vase conformation with self-inclusion of one alkyl group. Interaction of these complexes with La(OTf)(3) results in a change in the conformation of the cavitand from vase to kite with concomitant and quantitative release of the encapsulated guests. Two to three equivalents of the lanthanide salt per equivalent of cavitand 5a-d is necessary for the complete decomplexation of the included guest. The kite and the vase conformers equilibrate slowly on the NMR time scale at 295 K. The addition of good ligands for metal cations (nitrate or CMPO calixarene 16) shifts the equilibrium to the vase-shaped caviplex and allows quantitative control of the binding and release of the guest. The lanthanide complexes of octaphosphonates 5 in methanol-d(4) are velcraplex-like dimers held together by four metal cations.     

Synthesis and Conformational Switching of Partially and Differentially Bridged Resorcin[4]arenes Bearing Fluorescent Dye Labels. Preliminary Communication

We report the synthesis of modified Cram‐type cavitands bearing one or two fluorescent labels for single‐molecule spectroscopic studies of vase? kite conformational switching (Scheme 3). Syntheses were performed by stepwise bridging of the four couples of neighboring H‐bonded OH groups of resorcin[4]arene bowls (Schemes 2 and 3). The new substitution patterns enable the construction of a large variety of future functional architectures. ¹H‐NMR Investigations showed that the new partially and differentially bridged cavitands feature temperature‐ and pH‐triggered vase? kite conformational isomerism similar to symmetrical cavitands with four identical quinoxaline bridges (Table). It was discovered that vase? kite switching of cavitands is strongly solvent‐dependent.     

Metal ligation regulates conformational equilibria and binding properties of cavitands

A self-folding cavitand binds quinuclidinium cation in its vase conformation and lanthanum ions in its kite conformation. Metal coordination provides a novel switching mechanism for the uptake and release of guests.     

Conformational Switching of Resorcin[4]arene Cavitands by Protonation,Preliminary Communication

The synthesis of the quinoxaline‐bridged resorcin[4]arene cavitand 1 was accomplished from 2‐[3,5‐di(tert‐butyl)phenyl]acetaldehyde via formation of the intermediate octol 2 . Such cavitands are known to occur in an open `kite' conformation at low temperature (<213 K) but to adopt a `vase' conformation at elevated temperatures (>318 K). We discovered that protonation of cavitand 1 at room temperature by common acids, such as CF₃COOH, also causes reversible switching from `vase' to `kite', and that this conformational change can be conveniently monitored by both ¹H‐NMR and UV/VIS spectroscopy.     

Controlling the Size and Morphology of Supramolecular Assemblies of Viologen–Resorcin[4]arene Cavitands

A novel class of self‐assembling nanoparticles is formed with viologen–resorcin[4]arene cavitands; the association model is strongly controlled by their hydrophobicity. Interestingly, the cavitand assemblies are designed through click chemistry to form self‐assembled noncovalently connected aggregates through counterion displacement. The iodide and benzoate ions are utilized as strongly polarizable counterions to induce cavitand self‐assembly. The counterion‐mediated decrease in hydrophilicity of the viologen–resorcin[4]arenes is the underlying trigger to induce particle formation. These particles can be used as nanocontainers and find their applications in delivery systems.     

Tetrathiafulvalene (TTF)‐Bridged Resorcin[4]arene Cavitands: Towards New Electrochemical Molecular Switches

We report the synthesis of novel resorcin[4]arene‐based cavitands featuring two extended bridges consisting of quinoxaline‐fused TTF (tetrathiafulvalene) moieties. In the neutral form, these cavitands were expected to adopt the vase form, whereas, upon oxidation, the open kite geometry should be preferred due to Coulombic repulsion between the two TTF radical cations (Scheme 2). The key step in the preparation of these novel molecular switches was the P(OEt)₃‐mediated coupling between a macrocyclic bis(1,3‐dithiol‐2‐thione) and 2 equiv. of a suitable 1,3‐dithiol‐2‐one. Following the successful application of this strategy to the preparation of mono‐TTF‐cavitand 3 (Scheme 3), the synthesis of the bis‐TTF derivatives 2 (Scheme 4) and 19 (Scheme 5) was pursued; however, the target compounds could not be isolated due to their insolubility. Upon decorating both the octol bowl and the TTF cavity rims with long alkyl chains, the soluble bis‐TTF cavitand 23 was finally obtained, besides a minor amount of the novel cage compound 25a featuring a highly distorted TTF bridge (Scheme 6). In contrast to 25a , the deep cavitand 23 undergoes reversible vase → kite switching upon lowering the temperature from 293 to 193 K (Fig. 1). Electrochemical studies by cyclic voltammetry (CV) and differential pulse voltammetry (DPV) provided preliminary evidence for successful vase → kite switching of 23 induced by the oxidation of the TTF cavity walls.     

Functionalized and Partially or Differentially Bridged Resorcin[4]arene Cavitands: Synthesis and Solid‐State Structures

We report the synthesis and structural characterization of modified Cram‐type, resorcin[4]arene‐based cavitands. Two main loci on the cavitand backbone were selected for structural modification: the upper part (wall domain) and the lower part (legs). Synthesis of unsymmetrically bridged cavitands with different wall components (i.e., 7, 8 , and 14 – 18 ) was performed by stepwise bridging of the four couples of neighboring, H‐bonded OH‐groups of octol 1a (Schemes 1, 2, 4, and 5). Cavitands with modified legs (i.e., 20, 24, 27 , and 28 ), targeted for surface immobilization, were synthesized by short routes starting from suitable aldehyde starting materials incorporating either the fully preformed leg moieties or functional precursors to the final legs (Schemes 7–10). The new cavitand substitution patterns described in this paper should enable the construction of a wide variety of functional architectures in the future. X‐Ray crystallography afforded the characterization of cavitands 2c (Fig. 3) and 24 (Fig. 7) in the vase conformation, with 2c featuring a well‐ordered CH₂Cl₂ guest molecule in its cavity. A particular highlight is the X‐ray crystal‐structure determination of octanitro derivative 19 (Scheme 6), which, for the first time, shows a cavitand, lacking substituents in the ortho‐position to the two O‐atoms of the four resorcinol moieties, in the kite‐conformation (Fig. 5).     

Spatially Directional Resorcin[4]arene Cavitand Glycoconjugates for Organic Catalysis

The synthesis of novel spatially directional multivalent resorcin[4]arene cavitand glycoconjugates (RCGs) and their ability to catalyze organic reactions is reported. The β‐d ‐glucopyranoside moieties on the upper rim of the “bowl”‐shaped resorcin[4]arene cavitand core are capable of multiple hydrogen‐bond interactions resulting in a pseudo‐cavity, which has been investigated for organic transformations in aqueous media. The RCGs have been demonstrated to catalyze thiazole formation, thiocyanation, copper(I)‐catalyzed azide alkyne cycloaddition (CuAAC), and Mannich reactions; they impart stereoselectivity in the three‐component Mannich reaction. Thermodynamic values obtained from ¹H diffusion‐ordered spectroscopy (DOSY) experiments suggest that the upper saccharide cavity of the RCG and not the resorcin[4]arene cavity is the site of the complexation event.     

Light-actuated resorcin[4]arene cavitands

A light-actuated resorcin[4]arene cavitand equipped with two quinone (Q) and two opposite Ru(II)-based photosensitizing walls was synthesized and investigated. The cavitand is capable of switching from an open to a contracted conformation upon reduction of the two Q to the corresponding SQ radical anions by intramolecular photoinduced electron transfer in the presence of a sacrificial donor. The molecular switch was investigated by cyclic and rotating disc voltammetry, UV–Vis–NIR spectroelectrochemistry, transient absorption, NMR, and EPR spectroscopy. This study provides the basis for the development of future light-activated switches and molecular actuating nanodevices.     

Guest recognition with micelle-bound cavitands

We report that a benzimidazole cavitand is incorporated in aqueous phosphocholine (PC) micelles, folds into the vase conformation, and functions as small-molecule host. As a micelle-bound host it has the ability to sequester selective hydrophobic guest "anchors" into its interior. These anchors include cycloalkanes, adamantanes, and nitrogen heterocycles that compete favorably with the large excess of PC alkyl side-chains that make up the micelle interior. The adamantyl anchor was further functionalized with a fluorophore, and in another instance a dipeptide and both guests retain their recognition properties with the micelle-bound cavitand. Additionally, we report that variations in the cavitand periphery and rim are well-tolerated under our experimental conditions. We find that enhanced binding toward certain guests in both micelles as well as in solution occurs in response to titration with base; this previously unknown property of benzimidazole cavitands is reported in detail.     

Synthesis of a Zn-salen resorcinarene-based cavitand and its fluorescence response to nitro compounds

The synthesis, spectroscopic characterisation, conformational switching and fluorescence quenching efficiency of a resorcinarene-based cavitand containing Zn-salen (Zn-Cav) are reported. Synthesis of Zn-Cav was accomplished by the condensation of a quinoxaline derivatised with Zn-salen and a resorcinarene-based cavitand containing three quinoxalines. ¹H NMR spectroscopy confirmed that in DMSO, chloroform and acetone Zn-Cav resides in the vase conformation. The molecular geometry of Zn-Cav selectively changes from vase to kite under acidic conditions. Detection by fluorescence quenching of nitro-containing molecules, such as 4-nitrotoluene, 2,4-dinitrotoluene and 2,3-dimethyl-2,3-dinitrobutane was explored by spectrofluorimetry. It was found that the fluorescence of Zn-Cav is efficiently quenched by nitroaromatic compounds.     

Synthesis of porphyrin conjugates based on conformationally rigid and flexible resorcin[4]arene frameworks

Porphyrin conjugates were synthesized based on conformationally rigid, bowl shaped cavitand, and flexible unfirm resorcin[4]arenes. The influence of the resorcin[4]arene fragment on the porphyrin fluorescence is investigated.     

Synthesis of Methylene-Bridged Resorcin[4]arene Dimers

Methylene-bridged resorcin[4]arene dimers were synthesized by the Sc(OTf)₃-catalyzed hydroxymethylation of partially acetylated resorcin[4]arenes, and their preliminary complexation properties with tetraethylammonium ion were examined in CD₃OD by ¹H NMR spectroscopy. The dimers adopted a closed capsular conformation in this solvent and bound the guest molecule into their cavity.     

Hydrazide as a new hydrogen-bonding motif for resorcin[4]arene-based molecular capsules

The resorcin[4]arene-based benzoylhydrazide cavitands formed stable molecular capsules in nonpolar solvents by the eight intermolecular N-H...O=C hydrogen bondings, two from each four paired hydrazides, and the four intramolecular O-H2C-O...H-N hydrogen bondings on each cavitand. The stability of these molecular capsules depends on the encapsulated guest in the following order: CH3SO3(-) > CH3CO2(-) > CH3CH2NH2 x HCl approximately = CH3NH2 x HCl > (CH3)4N(+) > toluene > C2D2Cl4.     

Alleno‐Acetylenic Cage (AAC) Receptors: Chiroptical Switching and Enantioselective Complexation of trans‐1,2‐Dimethylcyclohexane in a Diaxial Conformation

Four enantiopure 1,3‐diethynylallenes (DEAs) with OH termini were attached to the rim of a resorcin[4]arene cavitand. The system undergoes conformational switching between a cage form, closed by a circular H‐bonding array, and an open form, with the tertiary alcohol groups reaching outwards. The cage form is predominant in apolar solvents, and the open conformation in small, polar solvents. Both states were confirmed in solution and in X‐ray co‐crystal structures. ECD spectra of the alleno‐acetylenic cages (AACs) are highly conformation sensitive, the longest wavelength Cotton effect at 304 nm switches from Δ?=+191 m ^?1 cm^?1 for open (P)₄‐AAC?acetonitrile to Δ?=?691 m ^?1 cm^?1 (ΔΔ?=882 m ^?1 cm^?1) for closed (P)₄‐AAC?cyclohexane. Complete chiral resolution of (±)‐trans‐1,2‐dimethylcyclohexane was found in the X‐ray structures, with (P)₄‐AAC exclusively bound to the (R,R)‐ and (M)₄‐AAC to the (S,S)‐guest. Guest inclusion occurs in a higher energy diaxial conformation.