Synthesis and Evaluation of Novel Proton Exchange Membranes Containing the Semisquaric Acid Group

We focus our attention here on semisquaric acid, which is known to show high acidity, as a new proton dissociating group for proton exchange membranes (PEMs). The introduction of a squaric acid group into aromatic polymers was conducted by the reaction of lithiated aromatic polymers and diisopropoxy squarate, followed by treatment with hydrochloric acid. A resulting polyphenylsulfone membrane with the squaric acid group introduced (PPSf‐SQ, IEC = 4.1 meq·g⁻¹) showed proton conductivity of 1.0 × 10⁻¹ S·cm⁻¹ at 80 °C under 95% relative humidity, which indicates that the semisquaric acid has the potential to become an alternative proton‐conducting group for PEMs.

     

Heteropolyacid-encapsulated self-assembled materials for anhydrous proton-conducting electrolytes

The composite material of heteropolyacid (12-phosphotungstic acid; PWA) and polystyrene sulfonic acid (PSS) construct the PWA-encapsulated material by the self-assembly of -SO3H onto the PWA surface; as a result, the fast proton transfer occurred at the interface between the PWA and -SO3H, and the encapsulated material indicated the high anhydrous proton conductivity of 1 x 10(-2) S cm(-1) at 180 degrees C. These anhydrous proton-conducting materials without the existence of water molecules are quite different from customary ion-exchange membrane, such as Nafion, and may have advantages as an electrolyte membrane for polymer electrolyte membrane fuel cells operating at intermediate temperatures under anhydrous conditions but also for electrochemical devices including electrochromic displays, chemical sensors, and others.     

Phosphoric acid‐doped imidazolium ionomers with enhanced stability for anhydrous proton‐exchange membrane applications

Phosphoric acid‐doped crosslinked proton‐conducting membranes with high anhydrous proton conductivity, and good chemical stability in phosphoric acid were synthesized and characterized. The synthetic procedure of the acid‐doped composite membranes mainly involves the in situ crosslinking of polymerizable monomer oils (styrene and acrylonitrile) and vinylimidazole, and followed by the sulfonation of pendant imidazole groups with butanesultone, and further doped with phosphoric acid. The resultant phosphoric acid‐doped composite electrolyte membranes are flexible and show high thermal stability and high‐proton conductivity up to the order of 10^?2 S cm^?1 at 160 °C under anhydrous conditions. The phosphoric acid uptake, swelling degree, and proton conductivity of the composite membranes increase with the vinylimidazole content. The resultant composite membranes also show good oxidative stability in Fenton's reagent (at 70 °C), and quite good chemical stability in phosphoric acid (at 160 °C). The properties of the prepared electrolyte membranes indicate their promising prospects in anhydrous proton‐exchange membrane applications. © 2013 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013 , 51, 1311–1317     

Two‐in‐One: Inherent Anhydrous and Water‐Assisted High Proton Conduction in a 3D Metal–Organic Framework

The development of solid‐state proton‐conducting materials with high conductivity that operate under both anhydrous and humidified conditions is currently of great interest in fuel‐cell technology. A 3D metal–organic framework (MOF) with acid–base pairs in its coordination space that efficiently conducts protons under both anhydrous and humid conditions has now been developed. The anhydrous proton conductivity for this MOF is among the highest values that have been reported for MOF materials, whereas its water‐assisted proton conductivity is comparable to that of the organic polymer Nafion, which is currently used for practical applications. Unlike other MOFs, which conduct protons either under anhydrous or humid conditions, this compound should represent a considerable advance in the development of efficient solid‐state proton‐conducting materials that work under both anhydrous and humid conditions.     

Anhydrous Superprotonic Conductivity in the Zirconium Acid Triphosphate ZrH5(PO4)3**

The development of solid-state proton conductors with high proton conductivity at low temperatures is crucial for the implementation of hydrogen-based technologies for portable and automotive applications. Here, we report on the discovery of a new crystalline metal acid triphosphate, ZrH₅(PO₄)₃ (ZP3), which exhibits record-high proton conductivity of 0.5–3.1×10⁻² S cm⁻¹ in the range 25–110 °C in anhydrous conditions. This is the highest anhydrous proton conductivity ever reported in a crystalline solid proton conductor in the range 25–110 °C. Superprotonic conductivity in ZP3 is enabled by extended defective frustrated hydrogen bond chains, where the protons are dynamically disordered over two oxygen centers. The high proton conductivity and stability in anhydrous conditions make ZP3 an excellent candidate for innovative applications in fuel cells without the need for complex water management systems, and in other energy technologies requiring fast proton transfer.     

One Dimensional Enhanced Anhydrous Proton Conduction in Well Defined Molecular Columns Induced by Non-Covalent Interactions

1D anhydrous proton conduction is enhanced significantly in ionic channels created by self-assembly of functionalized organic phosphonic acid and aromatic heterocyclic 1,2,4-triazole molecules. This study reveals high proton conduction in one dimension through a well-defined supramolecular architecture in which two different molecules undergo host–guest synergy and self-assemble to provide two-fold advantages: 1) formation of the ionic channels and 2) higher proton conduction in the absence of water. A clear correlation is found between the phenomena of ionic channels and anhydrous conductivity in the absolute dry state and we demonstrate that the one-dimensional conductivity can be as high as that recorded for 3D channels in, for instance, Nafion.     

Novel anhydrous proton conducting copolymers of 1‐vinyl‐1,2,4‐triazole and diisopropyl‐p‐vinylbenzyl phosphonate

Phosphonic acid functional polymers are currently of interest because of their high proton conductivity in humidified and anhydrous systems. In addition, heterocyclic compounds are used in anhydrous proton conducting polymer membranes. In that study, a new copolymer based on 1‐vinyl‐1,2,4‐triazole (VTri) and diisopropyl‐p‐vinylbenzyl phosphonate (VBP) was synthesized, and their thermal, chemical, and proton conducting properties were investigated. The copolymers were synthesized by free radical copolymerization of the corresponding monomers at several monomer feed ratios to obtain P(VTri‐co‐VBP) copolymers. The copolymer samples were then hydrolyzed to produce poly(vinyl triazole‐co‐vinyl phosphonic acid) copolymers. The composition of the copolymers was determined by elemental analysis. The copolymerization and hydrolysis reactions were verified by Fourier transform infrared spectroscopy and ion exchange capacity measurements. Thermogravimetry analysis indicates that the copolymers are thermally stable up to 300°C. In order to increase the proton conductivity, the copolymers were doped with H₃PO₄ at several stoichometric ratios. The proton conductivity increases with triazole and phosphoric acid content. In the absence of humidity, the copolymer electrolyte, P(VTri‐co‐VBPA)1:0.5 X = 2, showed a proton conductivity of 0.005 S/cm at 150°C. Copyright © 2013 John Wiley & Sons, Ltd.     

Anhydrous solid proton conductors based on perfluorosulfonic ionomer with polymeric solvent for polymer electrolyte fuel cell

Novel anhydrous polymeric proton conductors have been prepared from perfluorosulfonic acid ionomer with polymer solvent as supplying proton pathway through the segmental motion of polymer chains for polymer electrolyte fuel cell (PEFC) application. Since the membranes do not contain liquid-state acid or solvent, the membranes may promise more stable performances during the operation of PEFC. The Nafion-based anhydrous proton conductors showed maximum proton conductivity of about 4.0 × 10^?3 S cm^?1 at 130 °C under anhydrous condition. The mechanical properties of the membranes were enhanced by introducing H⁺-doped TiO₂ nanoparticles without the conductivity degradation. In addition, the electrochemical properties of the membrane electrode assembly (MEA) employing the anhydrous membrane as ionomer have been investigated, showing stable open circuit voltages (OCVs) over 0.9 V under non-humidified condition.     

Anhydrous proton transport system based on zwitterionic liquid and HTFSI

Novel binary ionic liquids based on zwitterionic liquid and HTFSI for anhydrous proton transport were prepared and showed ionic conductivity of about 10(-2) S cm(-1) at 150 degrees C and a zwitterionic liquid content of 60 mol%.     

2-取代咪唑衍生物掺杂高温非水用Nafion质子交换膜的制备和性能

高温质子交换膜燃料电池所面临的一个主要技术障碍是高温低湿度环境下能够具有满足电池工作条件的膜的制备.本文通过所合成的2-取代咪唑衍生物与全氟磺酸树脂的掺杂,采用溶液重铸法制备了可以在高温无水条件下工作的质子交换膜.通过2-位疏水基团的接枝,实现了非水质子传导介质的咪唑环在膜内的固定,所制备的复合质子交换膜的导质子率在160℃无水条件下达到6.8×10^-3Scm^-1;而且相比全氟磺酸均质膜,其热稳定性也有所提高.采用静电力显微镜观察到了所制备的复合质子交换膜内相互连接的离子团簇的形成;结合其质子传导活化能,提出了所制备的复合质子交换膜在120℃以下质子传导以跳跃方式为主;在120℃以上,则以咪唑环的＂钟摆＂形式实现质子在膜内的传输.     

Squaric acid N-hydroxylamides: synthesis, structure, and properties of vinylogous hydroxamic acid analogues

The synthesis of squaric acid N-hydroxylamide esters 5 and amides 6 from dimethyl squarate 2a is described. These derivatives are analogues of the naturally occurring iron(III) chelator hydroxamic acid. On the basis of a comparative reactivity study, a concerted retro-Cope mechanism for the formation of the N-hydroxylamide esters 5 by reaction of dimethyl squarate with hydroxylamines is proposed. A preliminary iron(III) binding study of these hydroxamic acid analogues is presented, demonstrating binding of iron(III) to amides 6 in aqueous solutions, while the esters 5 did not show any sign of metal ion binding. 13C NMR spectroscopic data (chemical shift and spin-lattice relaxation time determination) of these and related derivatives delineate the resonance structures predominant in these molecules. The resonance structures of the derivatives rationalize their spectroscopic data, chemical reactivity, and iron(III) binding properties. Single-crystal X-ray structure analyses of squaric acid N-hydroxylamide ester 5b and squaric acid N-hydroxylamide amide 6c confirm their connectivity and provide structural evidence supporting the spectroscopically derived conclusions. The squaric acid N-hydroxylamides are potentially useful in the construction of chemosensors for iron(III).     

不对称芳基取代的方酰胺和异方酰胺的合成

Ｎ－芳基氮氧方酸的活性羟基能够被芳伯胺取代。利用这一特性，可在方酸四碳环上引入另一不同的芳胺基，即可获得不对称芳基取代的方酰胺或异方酰胺。以乙醇等为介质，芳伯胺与７种Ｎ－芳基氮方酸反应，制得２５个不对称的方酰胺和２４个不对称的异方酰胺。该合成方法优点突出，反应简便有效，通用性强。     

Pore Geometry and Surface Engineering of Covalent Organic Frameworks for Anhydrous Proton Conduction

Developing new materials for anhydrous proton conduction under high-temperature conditions is significant and challenging. Herein, we create a series of highly crystalline covalent organic frameworks (COFs) via a pore engineering approach. We simultaneously engineer the pore geometry (generating concave dodecagonal nanopores) and pore surface (installing multiple functional groups such as −C=N−, −OH, −N=N− and −CF₃) to improve the utilization efficiency and host–guest interaction of proton carriers, hence benefiting the enhancement of anhydrous proton conduction. Upon loading with H₃PO₄, COFs can realize a proton conductivity of 2.33×10⁻² S cm⁻¹ under anhydrous conditions, among the highest values of all COF materials. These materials demonstrate good stability and maintain high proton conductivity over a wide temperature range (80–160 °C). This work paves a new way for designing COFs for anhydrous proton conduction applications, which shows great potential as high-temperature proton exchange membranes.     

A novel proton conductor of imidazole-aluminium phosphate hybrids in the solid state

Anhydrous proton transport at temperatures above 100 °C has attracted considerable attention in the development of fuel cells that operate at intermediate temperatures. Liquid-state imidazole (ImH) is known to be a fast anhydrous proton conductor above 100 °C; however, evaporation and severe conductivity drops above and below its melting point (～90 °C), respectively, are major drawbacks to ImH. In this paper, we report a novel solid-state anhydrous ImH-Al(H(2)PO(4))(3) (AlP) hybrid material prepared via a simple synthesis using mechanical milling. This solid-state hybrid exhibits relatively a high ionic conductivity of ～0.1 mS cm(-1) at 100 °C and remarkably a small activation energy of 0.23 eV. In addition, the ImH-AlP hybrid material provides a means of overcoming both temperature-dependent drawbacks to pure ImH: (1) the ImH-AlP hybrid is thermally stable up to 130 °C, and (2) the hybrid material maintains high ionic conductivity below the melting point of ImH.     

Polymer electrolyte membranes based on p‐toluenesulfonic acid doped poly(1‐vinyl‐1,2,4‐triazole): Synthesis,thermal and proton conductivity properties

Throughout this work, the synthesis, thermal as well as proton conducting properties of acid doped heterocyclic polymer were studied under anhydrous conditions. In this context, poly(1‐vinyl‐1,2,4‐triazole), PVTri was produced by free radical polymerization of 1‐vinyl‐1,2,4‐triazole with a high yield. The structure of the homopolymer was proved by FTIR and solid state ¹³C CP‐MAS NMR spectroscopy. The polymer was doped with p‐toluenesulfonic acid at various molar ratios, x = 0.5, 1, 1.5, 2, with respect to polymer repeating unit. The proton transfer from p‐toluenesulfonic acid to the triazole rings was proved with FTIR spectroscopy. Thermogravimetry analysis showed that the samples are thermally stable up to ～250 °C. Differential scanning calorimetry results illustrated that the materials are homogeneous and the dopant strongly affects the glass transition temperature of the host polymer. Cyclic voltammetry results showed that the electrochemical stability domain extends over 3 V. The proton conductivity of these materials increased with dopant concentration and the temperature. Charge transport relaxation times were derived via complex electrical modulus formalism (M*). The temperature dependence of conductivity relaxation times showed that the proton conductivity occurs via structure diffusion. In the anhydrous state, the proton conductivity of PVTri1PTSA and PVTri2PTSA was measured as 8 × 10^?4 S/cm at 150 °C and 0.012 S/cm at 110 °C, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1016–1021, 2010     

N-芳基氮氧方酸的合成研究

N-芳基氮氧方酸(3-芳胺基-4-羟基-3-环丁烯二酮)是合成不对称方酸衍生物的关键中间体之一，开展了对其合成方法的研究，发现并实现了方酸与芳伯胺在水中的脱水反应，制得17个N-芳基氮氧方酸3a～3q，其中N-8'-喹啉基氮氧方酸(3q)具有热致变色性质，根据实验事实，提出了可能的反应历程。该合成方法产率较高，产物易于分离纯化，是制备N-芳基氮氧方酸简便有效的好方法。     

13C-NMR. Spectra,Structure and Reactivity of Cyclic Oxocarbons

The structures of cyclic polyketones, their hydrates and reduction products were studied in different solvents by ¹³C-NMR. spectroscopy. In dimethylsulfoxide solution rhodizonic acid (1) , croconic acid (2) and squaric acid (3) exhibit signal averaging. In anhydrous tetrahydrofuran 1 and 2 could be observed as non-dynamic species. The spontaneous reactions of dodecahydroxycyclohexane (5) and decahydroxycyclopentane (‘leuconic acid’) (6) and the sequence of formation of ring-contracted products were investigated. Key intermediates could be clearly identified which support the mechanism proposed earlier involving a benzylic acid type rearrangement followed by decarboxylation and subsequent redox reactions.     

Anhydrous proton conducting membranes based on electron-deficient nanoparticles/PBI-OO/PFSA composites for high-temperature PEMFC

PEMFC operating at high temperature (100–200 °C) are expected to have significant advantages but face big challenges in the development of suitable proton exchange membranes. This communication describes novel PBI-OO/PFSA blend membranes, which facilitate proton conduction under anhydrous conditions based on a “proton donor–proton acceptor” concept. The proton conductivity of the blends under anhydrous conditions exceeded that of PFSA by a factor of 50 at ambient temperature and of 2–4 at elevated temperature. Intermolecular interaction between two polymer components was investigated by FT-IR spectroscopy. After incorporation of inorganic electron-deficient compounds (BN nanoparticles), the anhydrous proton conductivity of the composites was higher than that of the bare PFSA by three orders of magnitude at ambient temperature and more than one order of magnitude at 140 °C.     

方酸与某些偶氮化合物的反应

作为非苯系芳香性化合物和有机插烯二元酸,双功能性的方酸,可与许多亲核试剂反应并生成相应的双取代产物,通常都很难生成单取代产物。当它与芳环直接相连时会产生惊人的深色位移,这类化合物有诱人的应用前景。考虑到偶氮染料在染料工业中的作用和地位,我们试图在方酸衍生物中引入偶氮基,     

Intermediate temperature proton conductors for PEM fuel cells based on phosphonic acid as protogenic group: a progress report

The melting behaviour and transport properties of straight chain alkanes mono- and difunctionalized with phosphonic acid groups have been investigated as a function of their length. The increase of melting temperature and decrease of proton conductivity with increasing chain length is suggested to be the consequence of an increasing ordering of the alkane segments which constrains the free aggregation of the phosphonic acid groups. However, the proton mobility is reduced to a greater extent than the proton diffusion coefficient indicating an increasing cooperativity of proton transport with increasing length of the alkane segment. The results clearly indicate that the "spacer concept", which had been proven successful in the optimization of the proton conductivity of heterocycle based systems, fails in the case of phosphonic acid functionalized polymers. Instead, a very high concentration of phosphonic acid functional groups forming "bulky" hydrogen bonded aggregates is suggested to be essential for obtaining very high proton conductivity. Aggregation is also suggested to reduce condensation reactions generally observed in phosphonic acid containing systems. On the basis of this understanding, the proton conductivities of poly(vinyl phosphonic acid) and poly(meta-phenylene phosphonic acid) are discussed. Though both polymers exhibit a substantial concentration of phosphonic acid groups, aggregation seems to be constrained to such an extent that intrinsic proton conductivity is limited to values below sigma = 10(-3) S cm(-1) at T = 150 degrees C. The results suggest that different immobilization concepts have to be developed in order to minimize the conductivity reduction compared to the very high intrinsic proton conductivity of neat phosphonic acid under quasi dry conditions. In the presence of high water activities, however, (as usually present in PEM fuel cells) the very high ion exchange capacities (IEC) possible for phosphonic acid functionalized ionomers (IEC >10 meq g(-1)) may allow for high proton conductivities in the intermediate temperature range (T approximately 120 -160 degrees C).