Synthesis and antibacterial activity of silver nanoparticles with different sizes

Silver nanoparticles with different sizes (7, 29, and 89 nm mean values) were synthesized using gallic acid in an aqueous chemical reduction method. The nanoparticles were characterized using transmission electron microscopy (TEM), dynamic light scattering (DLS), X-ray diffraction (XRD), and ultraviolet–visible (UV–Vis) absorption spectroscopy; the antibacterial activity was assessed using the standard microdilution method, determining the minimum inhibitory concentration (MIC) according to the National Committee for Clinical Laboratory Standards. From the microscopies studies (TEM) we observed that silver nanoparticles have spherical (7 and 29 nm) and pseudospherical shape (89 nm) with a narrow size distribution. The sizes of the silver nanoparticles were controlled by varying some experimental conditions. It was found that the antibacterial activity of the nanoparticles varies when their size diminishes.     

Synthesis and characterization of superparamagnetic iron oxide nanoparticles for biomedical applications

Monodisperse iron oxide nanoparticles (NPs) of 4 nm were obtained through high-temperature solution phase reaction of iron (III) acetylacetonate with 1, 2-hexadecanediol in the presence of oleic acid and oleylamine. The as-synthesized iron oxide nanoparticles have been characterized by X-ray diffraction, transmission electron microscopy, Mössbauer spectroscopy and magnetic measurements. The species obtained were Fe₃O₄ and/or $\upgamma$ -Fe₂O₃. These NPs are superparamagnetic at room temperature and even though the reduced particle size they show a high saturation magnetization (MS ≈ 90 emu/g).     

Magnetic iron oxide nanoparticles: Synthesis and surface coating techniques for biomedical applications

Iron oxide nanoparticles are the most popular magnetic nanoparticles used in biomedical applications due to their low cost, low toxicity, and unique magnetic property. Magnetic iron oxide nanoparticles, including magnetite （Fe304） and maghemite （γ-Fe203）, usually exhibit a superparamagnetic property as their size goes smaller than 20 nm, which are often denoted as superparamagnetic iron oxide nanoparticles （SPIONs） and utilized for drug delivery, diagnosis, therapy, and etc. This review article gives a brief introduction on magnetic iron oxide nanoparticles in terms of their fundamentals of magnetism, magnetic resonance imaging （MRI）, and drug delivery, as well as the synthesis approaches, surface coating, and application examples from recent key literatures. Because the quality and surface chemistry play important roles in biomedical applications, our review focuses on the synthesis approaches and surface modifications of iron oxide nanopar- ticles. We aim to provide a detailed introduction to readers who are new to this field, helping them to choose suitable synthesis methods and to optimize the surface chemistry of iron oxide nanoparticles for their interests.     

Synthesis and characterization of DSSC by using Pt nano-counter electrode: photosensor applications

Pt electrode prepared by chemical method has been employed as counter electrode in dye-sensitized solar cell. TiO₂ nanomaterial was deposited on fluorine-doped tin oxide substrate to be used as photoanode. Structure of the TiO₂ and Pt films was investigated by atomic force microscope. The effect of illumination intensity on the photovoltaic parameters such as open circuit voltage, short circuit current density, output power, fill factor and efficiency of these cells was investigated in the range 2.5–130 mW/cm^?2. The cell efficiency is stable above 70 mW/cm². The fill factor is almost constant all over the studied range of illumination intensity. Impedance spectroscopy of the studied device as the summary measurements of the capacitance–voltage, conductance–voltage and series resistance–voltage characteristics were investigated in a wide range of frequencies (5 kHz–1 MHz). At low frequencies, the capacitance has positive values with peak around the origin due to the interfaces. At 200 and 300 kHz, the capacitance is inverted to negative with further increasing of the positive biasing voltage. Above 400 kHz, C–V profile shows complete negative behavior. Also, the impedance–voltage and phase–voltage characteristics were investigated. This cell shows a new promising device for photosensor applications due to high sensitivity in low and high illuminations.     

Synthesis and characterization of vanadium nanoparticles on activated carbon and their catalytic activity in thiophene hydrodesulphurization

Vanadium nanoparticles (∼7 nm) stabilized on activated carbon were synthesized by the reduction of VCl₃·3THF with K[BEt₃H]. This material was characterized by inductive coupled plasma-atomic emission spectroscopy (ICP-AES), high-resolution transmission electron microscopy (HRTEM) and X-ray photoelectron spectroscopy (XPS) analyses. The catalytic performance of the carbon-supported vanadium was studied using thiophene hydrodesulfurization (HDS) as model reaction at 300 °C and P = 1 atm. The catalytic activity of the vanadium carbide phase on the activated carbon carrier was more significant than that of the reference catalysts, alumina supported NiMoS. The method proposed for the synthesis of such a catalyst led to an excellent performance of the HDS process.     

Synthesis and study of electroactive nanoparticles and their polymer composites for novel applications

Polymer ceramic composites using a polymer binder, nanosized BaTiO₃ and metal particles were developed for radiation shielding in the microwave region. From X-ray Diffraction (XRD) the crystallinity and nanosize of BaTiO₃ was confirmed in the composite. Interesting changes in Differential Scanning Calorimetry (DSC) were observed before and after ball milling of BaTiO₃. Shielding Efficiency (SE) of microwave radiation has been measured from transmitted fraction (TF) of electromagnetic waves (EM) at different frequencies. The changes in TF were assigned to reflection and absorption of EM waves in different composites.     

聚合物表面银纳米颗粒的大面积均匀沉积及其应用

通过化学浸润和光还原法在聚合物薄膜基片（三醋酸纤维树酯）上直接沉积制备出大面积范围内颗粒大小、表面密度等分布均匀的纳米金属银颗粒.紫外吸收光谱和高分辨透射电镜分析表明，在室温实验条件下调整化学溶液浓度，可获得颗粒直径在2—5nm范围内的球形金属纳米银颗粒.通过接触拷贝方式，获得了基于银纳米颗粒形成的全息光栅. 关键词： 银纳米颗粒 聚合物薄膜 浸润 光还原     

Leucine-coated cobalt ferrite nanoparticles: Synthesis,characterization and potential biomedical applications for drug delivery

This work was primarily focused on the synthesis, characterization and biomedical applications of cobalt ferrite (CoFe₂O₄) nanoparticles, which were synthesized by a facile solvothermal method using an amino acid of Leucine (Leu) as the surface coating agents. The morphology, structure and properties of the as-synthesized uncoated and Leu-coated CoFe₂O₄ nanoparticles were characterized in detail by means of XRD, SEM, TEM, DLS, FTIR, XPS, TGA and SQUID. More importantly, it was found that the Leu-coated CoFe₂O₄ nanoparticles can be used as the efficient drug delivery with a drug loading capacity of 0.32 mg/mg for doxorubicin hydrochloride (DOX), and the loaded DOX demonstrated a sustained and progressive release manner. The in vitro cytotoxicity studies towards the HeLa cells were carried out, and the results indicated that the Leu-coated CoFe₂O₄ nanoparticles exhibited a relatively high cell viability compared with that of bare CoFe₂O₄ nanoparticles and the DOX loaded Leu-coated CoFe₂O₄ nanoparticles presented an obvious cytotoxic effect on HeLa cells.     

Synthesis and characterization of L10 FePt nanoparticles from Pt–Fe3O4 core-shell nanoparticles

Pt/Fe₃O₄ core-shell nanoparticles have been prepared by a modified polyol method. Pt nanoparticles were first prepared via the reduction of Pt(acac)₂ by polyethylene glycol-200 (PEG-200), and layers of iron oxide were subsequently deposited on the surface of Pt nanoparticles by the thermal decomposition of Fe(acac)₃. The nanoparticles were characterized by XRD and HR-TEM. The as-prepared Pt/Fe₃O₄ nanoparticles have a chemically disordered FCC structure and transformed into chemically ordered fct structure after annealing in reducing atmosphere (4% H₂, 96% Ar) at 700 °C. The ordered fct FePt phase has high magnetic anisotropy with coercivity reaching 7.5 kOe at room temperature and 9.3 kOe at 10 K.     

Synthesis and characterization of polymer encapsulated Cu–Ni magnetic nanoparticles for hyperthermia applications

Copper nickel alloy nanoparticles were synthesized by polyol reduction method and by physical melting process. The particles were further coated with a biodegradable polymer, polyethylene glycol. The particles have a curie temperature in the range of 43–46 °C and are designed to be used for hyperthermia applications. Morphology of these encapsulated particles was determined by electron microscopy. The curie temperature for alloy particles and encapsulated particles was also measured.     

Synthesis and characterization of stable Co and Cd doped nickel hydroxide nanoparticles for electrochemical applications

The present paper describes the physical-chemical characterization and electrochemical behavior of a new nanomaterial formed by the addition of cadmium and cobalt atoms into the structure of nickel hydroxide nanoparticles, these ones synthesized by an easy sonochemical method. Particles of about 5nm diameter were obtained and characterized by high resolution transmission electron microscopy (HRTEM), X-ray diffraction and Raman spectroscopy. Different nickel hydroxide nanoparticles were immobilized onto transparent conducting substrates by using electrostatic layer-by-layer providing thin films at the nanoscale and the electrochemical behavior was investigated. The formation of a mixed hydroxide was corroborated by observation of very interesting properties as redox potential shifting to less positive potentials and high stability when submitted to long electrochemical cycling or high times of ultrasonic synthesis, suggesting practical applications.     

Synthesis of Pt-Ni-Fe/CNT/CP nanocomposite as an electrocatalytic electrode for PEM fuel cell cathode

In order to use carbon nanotube (CNT)-supported catalyst as fuel cell electrodes, Pt-Ni-Fe/CNT/carbon paper (CP) electrode was prepared using an ethylene glycol reduction method. CNTs were directly synthesized on Ni-impregnated carbon paper, plain carbon cloth, and Teflonized carbon cloth using chemical vapor deposition. FESEM and TEM images and thermogravimetric analysis indicated that in situ CNT on carbon paper (ICNT/CP) possesses more appropriate structural quality and stronger adhesion to the substrate than other substrates. The contact angle analysis demonstrated that the degree of ICNT/CP surface hydrophobicity encountered a 24% increase in comparison to CP and promoted to superhydrophobicity from hydrophobicity. The polarization curves and electrochemical impedance spectroscopy results of the loaded Pt-Ni-Fe on in situ and ex situ CNT/CP illustrated that the power density increased and charge transfer resistance reduced compared to commercial Pt/C loaded on CP. The results can be attributed to the outstanding properties of CNTs and high catalytic activity of triple catalysts causing alloying of Pt with Ni and Fe, which makes them a proper candidate to be used as cathode electrodes in proton exchange membrane fuel cells.     

Synthesis and characterization of bovine femur bone hydroxyapatite containing silver nanoparticles for the biomedical applications

Bovine femur bone hydroxyapatite (HA) containing silver (Ag) nanoparticles was synthesized by thermal decomposition method and subsequent reduction of silver nitrate with N,N-dimethylformamide (DMF) in the presence of poly(vinylacetate) (PVAc). The structural, morphological, and chemical properties of the HA–Ag nanoparticles were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). TEM images showed that the Ag nanoparticles with size ranging from 8 to 20 nm and were arranged at the periphery of HA crystals. Bactericidal activity of HA–Ag with different concentration of Ag nanoparticles immobilized on the surface of HA was investigated against gram-positive Staphylococcus aureus (S. aureus, non-MRSA), Methicillin resistant S. aureus (MRSA) and gram-negative Escherichia coli (E. coli) by the disc diffusion susceptibility test. The HA–Ag nanoparticles showed that broad spectrum activity against non-MRSA, MRSA, and E. coli bacterial strains.     

Synthesis and characterization of various phases of cobalt oxide nanoparticles using inorganic precursor

Controllable and uniform doping of nanowires (NWs) is the ultimate challenge prior to their effective application. Si NWs amorphize and bend toward the impinging ions under ion irradiation as a result of viscous flow. We demonstrate that thermal annealing induces a full recovery of the crystalline phase corresponding to the unbending of the NWs. The competition between Solid Phase Epitaxy and Random Nucleation and Growth at the nanoscale is the key parameter controlling the recovery.     

Angle-dependent THz tomography – characterization of thin ceramic oxide films for fuel cell applications

A time-resolved THz tomography system for the incidence-angle-dependent three-dimensional characterization of layered structures is presented. The capabilities of the developed system are demonstrated on multi-layer ceramic samples used for solid oxide fuel cells (SOFC). Appropriate methods for determining unknown refractive indices are discussed. It is shown how the angle of incidence of a THz imaging system has a significant influence on measured signals. This fact can be exploited especially in Brewster-angle configurations to enhance the capabilities of any THz tomography system. Data evaluation algorithms are presented. Received: 8 June 2000 / Revised version: 13 September 2000 / Published online: 10 January 2001     

Size-controlled synthesis of superparamagnetic iron oxide nanoparticles and their surface coating by gold for biomedical applications

The size mono-dispersity, saturation magnetization, and surface chemistry of magnetic nanoparticles (NPs) are recognized as critical factors for efficient biomedical applications. Here, we performed modified water-in-oil inverse nano-emulsion procedure for preparation of stable colloidal superparamagnetic iron oxide NPs (SPIONs) with high saturation magnetization. To achieve mono-dispersed SPIONs, optimization process was probed on several important factors including molar ratio of iron salts [Fe³⁺ and Fe²⁺], the concentration of ammonium hydroxide as reducing agent, and molar ratio of water to surfactant. The biocompatibility of the obtained NPs, at various concentrations, was evaluated via MTT (3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide) assay and the results showed that the NPs were non-toxic at concentrations <0.1 mg/mL. Surface functionalization was performed by conformal coating of the NPs with a thin shell of gold (∼4 nm) through chemical reduction of attached gold salts at the surface of the SPIONs. The Fe₃O₄ core/Au shell particles demonstrate strong plasmon resonance absorption and can be separated from solution using an external magnetic field. Experimental data from both physical and chemical determinations of the changes in particle size, surface plasmon resonance optical band, phase components, core–shell surface composition, and magnetic properties have confirmed the formation of the mono-dispersed core–shell nanostructure.     

Studies on electrodeposition of Fe-W alloys for fuel cell applications

Electrodeposition of Fe-W alloy has been carried out from acidic triammonium citrate (TAC) complex bath solution. The deposit is characterised by XRD, SEM, EDAX, XPS and polarization techniques. The alloys are amorphous and become partially crystalline on heat treatment. The composition (Fe/W) of elements in the coating and their oxidation states vary from the surface to the bulk of the material. The coatings exhibit as novel electrode material with low over voltage and good corrosion resistance for anodic oxidation of methanol in H₂SO₄ medium. The anodic peak current, a measure of oxidation reaction rate is considerably high on Fe-W alloy when compared to pure Fe and also the relative surface area of Fe by alloying it with W found to increase by 1200-fold.     

Air stable colloidal copper nanoparticles: Synthesis,characterization and their surface-enhanced Raman scattering properties

Air stable colloidal copper nanoparticles are synthesized by a simple chemical reduction method using octadecylsilane as a reducing agent and octadecylamine as a stabilizing agent in toluene without any inert gas. The formation of nanosized copper was confirmed by its characteristic surface plasmon absorption peaks in UV–visible spectra. The transmission electron microscopic (TEM) images show that the resulting copper nanoparticles are distributed uniformly with a narrow size distribution. The X-ray diffraction (XRD) demonstrated that the obtained copper nanoparticles are single crystalline nanoparticles. Fourier transform infra-red (FT-IR) spectroscopic data suggested that the silane Si–H is responsible for the reduction of copper ions. And also the resulting colloidal copper nanoparticles exhibit large surface-enhanced Raman scattering (SERS) signals.     

Multifunctional magnetite and silica–magnetite nanoparticles: Synthesis,surface activation and applications in life sciences

A method for the introduction of amine groups onto the surface of magnetite and silica-coated magnetite nanoparticles has been established based on the condensation of aminopropyltriethoxysilane. Amine-modified particles were grafted with an oligonucleotide and used in the capture of a complimentary sequence. The particles’ efficiency at capture was observed to correlate directly with amine group surface density.