双通道原子荧光法同时测定水中砷和硒

采用双通道原子荧光法同时测定水中的砷和硒含量。以氢氧化钾–硼氢化钾溶液为还原剂,以硫脲–抗坏血酸–盐酸溶液为介质,在0~10μg/L范围内,砷、硒的质量浓度分别与荧光强度呈良好的线性,线性相关系数大于0.999,检出限分别为0.016,0.032μg/L。砷、硒测定结果的相对标准偏差为1.4%~1.5%(n=11),加标回收率在98.0%~102.0%之间。该方法操作简单、精确度高,适合于水中砷和硒含量的测定。     

氢化物发生电感耦合等离子体原子发射光谱法同时测定水和生物样品中砷、铋、锑和硒

研究了一种小型同心氢化物发生器配置一个气液分离器后与多道ICP－AES联用，同时测定水和生物样品中砷、铋、锑、硒的方法。检出限为砷0.4μg/L，铋0.5μg/L，锑1．4μg／L，硒0.5μg／L，相对标准偏差为砷2.7％，铋1．5％，锑2．7％，硒1．9％。用本法测定美国和国家标准物质中的氢化元素，结果满意。     

共沉淀富集氢化物发生-原子荧光光谱法同时测定山药中砷和硒

建立了共沉淀富集氢化物发生-原子荧光光谱法同时测定山药中痕量砷、硒。考察了共沉淀剂种类、用量,pH值及硼氢化钾浓度的影响。在优化实验条件下,在0～40μg/L范围内,砷、硒的线性相关系数分别为0.994、0.9967,检出限分别为0.0007μg/L、0.0011μg/L,相对标准偏差砷为1.06%、硒为0.77%。该法用于山药中砷、硒的测定,其平均加入回收率分别为95.4%和90.6%。该方法样液用量少,操作简便,适用于食品中痕量砷、硒的测定。     

利用乙酸对电感耦合等离子体质谱法的增敏效应测定砷与硒

建立了100 g/L乙酸基体改进电感耦合等离子体质谱法分析难电离元素砷和硒的方法。以100 g/L乙酸作为基体改进剂,可使砷和硒信号分别增加4~7倍。方法检出限分别为0.019μg/L和0.11μg/L,6次测定标准样品中10.0μg/L砷和硒的相对标准偏差(RSD)均小于3%。     

高压釜消解-氢化物发生原子荧光光度法测定土壤中的砷、硒

对高压釜密封消解一氢化物发生原子荧光法测定土壤中砷、硒的方法进行了研究。采用HNO3-HClO4作消解剂，在最佳的消解条件和测定条件下，测定砷、硒的线性回归方程分别为I=244．1c 1．03、I=88．26c 2．86．线性范围均为0．50～10．00μg／L，相关系数均为0．9999，检出限均为0．0002μg/mL。测定土壤中砷、硒的回收率分别为90％～105％、89％～104％，RSD分别为2．2％～4．0％、1．9％～3．1％。     

氢化物发生-原子荧光光谱法同时测定水中砷和锑

建立在硝酸介质中用氢化物发生-原子荧光光谱法同时测定水中砷和锑的方法。优化了仪器工作条件、酸度、硼氢化钾及还原剂浓度。砷、锑的线性范围为0～10．0μg／L;检出限分别为0．02,0．01μg／L;测定结果的相对标准偏差分别为1．77％～3．72％,2．95％～4．87％（n=6）;加标回收率分别为98％106％,96％105％。该法操作简便,灵敏度高,快速,便于推广,适用于水中砷和锑的同时测定。     

流动注射原子吸收光谱法测定富硒天麻、葡萄及大米中的硒

建立了流动注射氢化物发生-原子吸收光谱法测定富硒天麻、葡萄及大米中硒的方法。测定硒的线性范围为0．33μg/L-50μg/L，相对标准偏差小于3％，加标回收率为93％-106％。方法已广泛应用于实际样品中微量硒的测定。     

原子荧光光谱法测定野生杏仁中的微量硒

用原子荧光光谱法测定野生杏仁中的微量硒,对酸度、还原剂浓度等条件进行了试验。硒含量在0～10μg/L内与原子荧光强度线性相关,线性方程为Y=16．03X 36．28,相关系数r=0．9998,硒的的检出限为0．5μg／L,加标回收率为95％～105％,测定结果的相对标准偏差(n=6)小于5．0％。     

流动注射氢化物发生-原子吸收光谱法测定中药中的微量砷

探讨了流动注射氧化物发生-原子吸收光谱法测定微量砷的最佳条件,建立了中药中微量砷的流动注射氧化物发生-原子吸收光谱分析方法。砷的检出限为0.59μg/L,线性范围为0～30μg/L,线性回归方程为A=0.02228c 6.282×10~(-3),相关系数r=0.9992,相对标准偏差为2.6％～4.4％,回收率为91％～103％。方法操作简便、快速,灵敏度及自动化程度高。     

氢化物-原子荧光法同时测定大米中的砷和硒

采用氢化物-原子荧光光谱法测定大米中的砷和硒。在0～10μg／L范围内,砷和硒的浓度与荧光强度呈线性关系,相关系数分别为0．9996和0．9998,加标回收率分别为96．2％～100．8％和98．1％～107．6％,砷、硒测定结果的相对标准偏差分别不大于6．8％,5．7％（n=6）。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.