A New Route to Vitamin E Key‐Intermediates by Olefin Cross‐Metathesis

Ru‐Catalyzed olefin cross‐metathesis (CM) has been successfully applied to the synthesis of several phytyl derivatives ( 2b, 2d – f, 3b ) with a trisubstituted C?C bond, as useful intermediates for an alternative route to α‐tocopheryl acetate (vitamin E acetate; 1b ) (Scheme 1). Using the second‐generation Grubbs catalyst RuCl₂(C₂₁H₂₆N₂)(CHPh)PCy₃ (Cy = cyclohexyl; 4a ) and Hoveyda–Grubbs catalyst RuCl₂(C₂₁H₂₆N₂){CH‐C₆H₄(O‐ⁱPr)‐2} ( 4b ), the reactions were performed with various C‐allyl ( 5a – f, 7a,b ) and O‐allyl ( 8a – d ) derivatives of trimethylhydroquinone‐1‐acetate as substrates. 2,6,10,14‐Tetramethylpentadec‐1‐ene ( 6a ) and derivatives 6c – e of phytol ( 6b ) as well as phytal ( 6f ) were employed as olefin partners for the CM reactions (Schemes 2 and 5). The vitamin E precursors could be prepared in up to 83% isolated yield as (E/Z)‐mixtures.     

Micron‐granula polyolefin with self‐immobilized nickel and iron diimine catalysts bearing one or two allyl groups

Self‐immobilized nickel and iron diimine catalysts bearing one or two allyl groups of [ArN?C]₂(C₁₀H₆)NiBr₂ [Ar = 4‐allyl‐2,6‐(i‐Pr)₂C₆H₂] ( 1 ), [ArN?C(Me)][Ar′N? C(Me)]C₅H₃NFeCl₂ [Ar = Ar′ = 4‐allyl‐2,6‐(i‐Pr)₂C₆H₃, Ar = 2,6‐(i‐Pr)₂C₆H₃, and Ar′ = 4‐allyl‐2,6‐(i‐Pr)₂C₆H₃] were synthesized and characterized. All three catalysts were investigated for olefin polymerization. As a result, these catalysts not only showed high activities as the catalyst free from the allyl group, such as [ArN?C]₂C₁₀H₆NiBr₂ (Ar = 2,6‐(i‐Pr)₂C₆H₂)], but also greatly improved the morphology of polymer particles to afford micron‐granula polyolefin. The self‐immobilization of catalysts, the formation mechanism of microspherical polymer, and the influence on the size of the particles are discussed. The molecular structure of self‐immobilized nickel catalyst 1 was also characterized by crystallographic analysis. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1018–1024, 2004     

Peculiarities of Ethylene Polymerization Reactions with Heterogeneous Ziegler–Natta Catalysts: Kinetic Analysis

The previously developed kinetic scheme for olefin polymerization reactions with heterogeneous Ziegler–Natta catalysts states that the catalysts have several types of active centers which have different activities, different stabilities, produce different types of polymer materials, and respond differently to reaction conditions. In the case of ethylene polymerization reactions, each type of center exhibits an unusual chemical feature: a growing polymer chain containing one ethylene unit, Ti—C₂H₅, is unusually stable and can decompose with the formation of the Ti—H bond. This paper examines quantitative kinetic ramifications of this chemical mechanism. Modeling of the complex kinetics scheme described in the Scheme demonstrates that it correctly and quantitatively predicts three most significant peculiarities of ethylene polymerization reactions, the high reaction order with respect to the ethylene concentration, reversible poisoning with hydrogen, and activation in the presence of α‐olefins.     

Facile synthesis of sterically demanding SHOP‐type nickel catalysts for ethylene polymerization

The P,O‐chelated shell higher olefin process (SHOP) type nickel complexes are practical homogeneous catalysts for the industrial preparation of linear low‐carbon α‐olefins from ethylene. We describes that a facile synthetic route enables the modulation of steric hindrance and electronic nature of SHOP‐type nickel complexes. A series of sterically bulky SHOP‐type nickel complexes with variable electronic nature, {[4‐R‐C₆H₄C(O) = C‐PArPh]NiPh (PPh₃); Ar = 2‐[2′,6′‐(OMe)₂C₆H₃]C₆H₄; R = H ( Ni1 ); R = OMe ( Ni2 ); R = CF₃ ( Ni3 )}, were prepared and used as single component catalysts toward ethylene polymerization without using any phosphine scavenger. These nickel catalysts exhibit high thermal stability during ethylene polymerization and result in highly crystalline linear α‐olefinic solid polymer. The catalytic performance of the SHOP‐type nickel complexes was significantly improved by introducing a bulky ortho‐biphenyl group on the phosphorous atom or an electron‐withdrawing trifluoromethyl on the backbone of the ligand, indicating steric and electronic effects play critical roles in SHOP‐type nickel complexes catalyzed ethylene polymerization.     

Cyclic and linear poly(ferrocenylene alkylene)s synthesized from addition‐condensation polymerization of ferrocene with aldehydes

Oligo‐ and poly(ferrocenylene alkylene)s, [Fe(C₅H_5‐x)(C₅H_5‐y)CHR]_n (x = y = 1 or x = 2, y = 0; R = alkyl, aryl), were synthesized by Lewis acid‐promoted addition‐condensation polymerization of ferrocene with aldehydes. The reaction of alkyl aldehydes, such as n‐hept‐CHO, EtCHO and nBuCHO, with ferrocene yields a mixture of the cyclic and linear poly(ferrocenylene alkylene)s, while aryl aldehyde, such as C₆F₅CHO, CF₃C₆H₄‐4‐CHO and MeC₆H₄‐4‐CHO, forms the linear polymers exclusively. The linear polymer has terminal ? Fe(C₅H₄)(C₅H₅) and ? CH₂Aryl groups, which are characterized by high resolution mass spectroscopy. Results of addition‐condensation polymerization of ferrocenemethanol catalyzed by BF₃ indicate that the propagating polymer of the above addition‐condensation polymerization contains terminal 1‐hydroxyalkyl‐ferrocenylene group, ? Fe(C₅H₄)[C₅H₄{CH(OH)R}]. The trimer prepared from ferrocene and paraformaldehyde dimethylacetal contains 1,1′‐, 1,2‐, and 1,3‐ferrocenylene units, suggesting that the polymers obtained from alkyl and aryl aldehydes are also composed of these structural units. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3627–3635     

Novel cyclohexyl‐substituted salicylaldiminato–nickel(II) complex as a catalyst for ethylene homopolymerization and copolymerization

The cyclohexyl‐substituted salicylaldiminato–Ni(II) complex [O? (3‐C₆H₁₁)(5‐CH₃)C₆H₂CH?N‐2,6‐C₆H₃ⁱPr₂]Ni(PPh₃)(Ph) ( 4 ) has been synthesized and characterized with ¹H NMR and X‐ray structure analysis. In the presence of phosphine scavengers such as bis(1,5‐cyclooctadiene)nickel(0) [Ni(COD)₂], triisobutylaluminum (TIBA), and triethylaluminum (TEA), 4 is an active catalyst for ethylene polymerization and copolymerization with the polar monomers tert‐butyl‐10‐undecenoate, methyl‐10‐undecenoate, and 4‐penten‐1‐ol under mild conditions. The polymerization parameters affecting the catalytic activity and viscosity‐average molecular weight of polyethylene, such as the temperature, time, ethylene pressure, and catalyst concentration, are discussed. A polymerization activity of 3.62 × 10⁵ g of PE (mol of Ni h)^?1 and a weight‐average molecular weight of polyethylene of 5.73 × 10⁴ g^.mol^?1 have been found for 10 μmol of 4 and a Ni(COD)₂/ 4 ratio of 3 in a 30‐mL toluene solution at 45 °C and 12 × 10⁵ Pa of ethylene for 20 min. The polydispersity index of the resulting polyethylene is about 2.04. After the addition of tetrahydrofuran and Et₂O to the reaction system, 4 exhibits still high activity for ethylene polymerization. Methyl‐10‐undecenoate (0.65 mol %), 0.74 mol % tert‐butyl‐10‐undecenoate, and 0.98 mol % 4‐penten‐1‐ol have been incorporated into the polymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6071–6080, 2004     

Alternating Ring‐Opening Metathesis Copolymerization by Grubbs‐Type Initiators with Unsymmetrical N‐Heterocyclic Carbenes

A series of Ru^IV–alkylidenes based on unsymmetrical imidazolin‐2‐ylidenes, that is, [RuCl₂{1‐(2,4,6‐trimethylphenyl)‐3‐R‐4,5‐dihydro‐(3H)‐imidazol‐1‐ylidene}(CHPh)(pyridin)] (R=CH₂Ph ( 5 ), Ph ( 6 ), ethyl ( 7 ), methyl ( 8 )), have been synthesized. These and the parent initiators [RuCl₂(PCy₃){1‐(2,4,6‐trimethylphenyl)‐3‐R‐4,5‐dihydro‐(3H)‐imidazol‐1‐ylidene}(CHC₆H₅)] (R=CH₂C₆H₅ ( 1 ), C₆H₅ ( 2 ), ethyl ( 3 )) were used for the alternating copolymerization of norborn‐2‐ene (NBE) with cis‐cyclooctene (COE) and cyclopentene (CPE), respectively. Alternating copolymers, that is, poly(NBE‐alt‐COE)_n and poly(NBE‐alt‐CPE)_n containing up to 97 and 91 % alternating diads, respectively, were obtained. The copolymerization parameters of the alternating copolymerization of NBE with CPE under the action of initiators 1 – 3 and 5 – 8 were determined by using both a zero‐ and first‐order Markov model. Finally, kinetic investigations using initiators 1 – 3 , 6 , and 7 were carried out. These revealed that in contrast to the 2nd‐generation Grubbs‐type initiators 1 – 3 the corresponding pyridine derivatives 6 and 7 represent fast and quantitative initiating systems. Hydrogenation of poly(NBE‐alt‐COE)_n yielded a fully saturated, hydrocarbon‐based polymer. Its backbone can formally be derived by 1‐olefin polymerization of CPE (1,3‐insertion) followed by five ethylene units and thus serves as an excellent model compound for 1‐olefin polymerization‐derived copolymers.     

Isobutene polymerization initiated by [CP*TiMe2]+ in the presence of a series of novel,weakly coordinating counteranions

The highly electrophilic borane B(C₆F₅)₃ reacts with n‐octadecanol (n‐C₁₈H₃₇OH) and n‐octadecanethiol (n‐C₁₈H₃₇SH) to form the 1:1 adducts (n‐C₁₈H₃₇EH)B(C₆F₅)₃ (E = O or S). The latter are acidic and react with Cp*TiMe₃ in methylene chloride and toluene to give methane and the complexes [Cp*TiMe₂][(n‐C₁₈H₃₇E)B(C₆F₅)₃], which are very good initiators for the carbocationic polymerization of isobutene (IB) from ?40 to ?20 °C. High conversions to high molecular weight polyisobutene (PIB) in methylene chloride and moderate conversions to high molecular weight PIB in toluene are observed and are consistent with the anions [(n‐C₁₈H₃₇E)B(C₆F₅)₃]^? being very weakly coordinating. Although polymerization in methylene chloride is too rapid for the temperature to be controlled, polymerization in toluene is slower, and the temperatures can be controlled so that Arrhenius‐type plots of the logarithm of the number‐average molecular weight versus T^?1 = 1/T may be obtained. Activation energies for the degree of polymerization in these polymerization reactions and similar polymerizations carried out with n‐C₁₈H₃₇EH:borane ratios of 1:2 and with the activators [Ph₃C][B(C₆F₅)₄] and Al(C₆F₅)₃ range from ?11 to ?27 kJ mol^?1, values comparable to those for most conventional IB polymerization initiators. However, the values of the weight‐average and number‐average molecular weights are unusually high for the temperatures used, and this is consistent with current theories of the role of weakly coordinating anions. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3302–3311, 2002     

Synthesis,structure characterization and catalytic activity of lanthanide complexes containing an ansa carbonous‐bridged cyclopentadienyl—thienyl ligand

A kind of new lanthanocene complex with an ansa carbonous‐bridged cyclopentadienyl/aromatic heterocycle ligand was prepared and characterized. Based on the data of elemental analyses, MS and IR, they were presumed to be solvent‐free complexes (cyclo‐C₄H₃SCMe₂C₅H₄)₂LnCl [Ln = Er (1), Dd ( 2 ), Y ( 3 ), Sm ( 4 )]. These complexes were effective for the polymerization of methyl methacrylate in the presence of co‐catalyst. When AlEt₃ and NaH (nanometric) were used as different co‐catalysts, the lanthanocene complexes 1–4 showed different catalytic behavior. These differences resulted from the formation of different active species. The catalyst system (cyclo‐C₄H₃SCMe₂C₅H₄)₂LnCl/NaH (nanometric) showed high catalytic activity (yield ≥ 95% and Mη > 10⁵) in a short time at the ambient temperature. Copyright © 2008 John Wiley & Sons, Ltd.     

Copolymerizations of ethylene and polar comonomers with bis(phenoxyketimine) group IV complexes: Effects of the central metal properties

With triisobutylaluminum as a protection reagent, copolymerizations of ethylene with 10‐undecen‐1‐ol, 10‐undecenoic acid, and 5‐hexen‐1‐ol have been performed with bis[(3,5‐di‐^tBu? C₆H₂? 2‐O)? PhC?N(2‐F? C₆H₄)]ZrCl₂ ( a )/methylaluminoxane or bis[(3,5‐di‐^tBu? C₆H₂? 2‐O)? PhC?N(2‐F? C₆H₄)]TiCl₂ ( b )/methylaluminoxane as the catalyst. Both catalysts exhibit high activities of copolymerization in the presence of polar groups. The properties of the copolymers are strongly affected by the central metal properties of the catalysts. In comparison with complex a , titanium complex b appears to be less sensitive to polar monomers and more favorable for the preparation of higher molecular weight functionalized polyethylenes containing higher contents of polar groups. Studies on the polymerization temperature indicate that the catalytic activities decrease greatly with both complex a and complex b . The comonomer contents incorporated into the copolymers are slightly dependent on the polymerization temperature in the case of complex a , whereas in the case of complex b , the effect of the polymerization temperature is more distinct: an increase in the polymerization temperature can efficiently facilitate the incorporation of polar comonomers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 59–68, 2007     

Electrochemical polymerization of aniline in the SDS/n‐C5H11OH/H2SO4(aq) lyotropic liquid crystal

Electrochemical polymerization of aniline was performed by the method of ultramicroelectrode cyclic voltammetry in the lamellar liquid crystal and hexagonal liquid crystal of SDS/n‐C₅H₁₁OH/H₂SO₄(aq) system. The results indicate that the electrochemical polymerization of aniline can be catalyzed by the SDS/n‐C₅H₁₁OH/H₂SO₄(aq) lyotropic liquid crystal. The polymerization potential of aniline is smaller in the lyotropic liquid crystal system than that in the 0.10 mol L?1 sulfuric acid solution. The catalytic efficiency and polymerization rate of aniline increase with the n‐pentanol content, but decrease with the increase of the SDS content or [PhNH₂/H₂SO₄(aq)] content. Moreover, the catalytic efficiency of the lamellar liquid crystal exceeds that of the hexagonal liquid crystal in the SDS/n‐C₅H₁₁OH/H₂SO₄(aq) system. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2388–2394, 2006     

Olefin polymerization and copolymerization with soluble transition‐metal complex catalysts

Olefin polymerizations catalyzed by Cp′TiCl₂(O‐2,6‐ⁱPr₂C₆H₃) ( 1 – 5 ; Cp′ = cyclopentadienyl group), RuCl₂(ethylene)(pybox) { 7 ; pybox = 2,6‐bis[(4S)‐4‐isopropyl‐2‐oxazolin‐2‐yl]pyridine}, and FeCl₂(pybox) ( 8 ) were investigated in the presence of a cocatalyst. The Cp*TiCl₂(O‐2,6‐ⁱPr₂C₆H₃) ( 5 )–methylaluminoxane (MAO) catalyst exhibited remarkable catalytic activity for both ethylene and 1‐hexene polymerizations, and the effect of the substituents on the cyclopentadienyl group was an important factor for the catalytic activity. A high level of 1‐hexene incorporation and a lower r_E · r_H value with 5 than with [Me₂Si(C₅Me₄)(N^tBu)]TiCl₂ ( 6 ) were obtained, despite the rather wide bond angle of Cp Ti O (120.5°) of 5 compared with the bond angle of Cp Ti N of 6 (107.6°). The 7 –MAO catalyst exhibited moderate catalytic activity for ethylene homopolymerization and ethylene/1‐hexene copolymerization, and the resultant copolymer incorporated 1‐hexene. The 8 –MAO catalyst also exhibited activity for ethylene polymerization, and an attempted ethylene/1‐hexene copolymerization gave linear polyethylene. The efficient polymerization of a norbornene macromonomer bearing a ring‐opened poly(norbornene) substituent was accomplished by ringopening metathesis polymerization with the well‐defined Mo(CHCMe₂Ph)(N‐2,6‐ⁱPr₂C₆H₃)[OCMe(CF₃)₂]₂ ( 10 ). The key step for the macromonomer synthesis was the exclusive end‐capping of the ring‐opened poly(norbornene) with p‐Me₃SiOC₆H₄CHO, and the use of 10 was effective for this polymerization proceeding with complete conversion. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4613–4626, 2000     

Ethylene polymerization and ethylene/hexene copolymerization with vanadium(III) catalysts bearing heteroatom‐containing salicylaldiminato ligands

A series of novel vanadium(III) complexes bearing heteroatom‐containing group‐substituted salicylaldiminato ligands [RN?CH(ArO)]VCl₂(THF)₂ (Ar = C₆H₄, R = C₃H₂NS, 2a ; C₇H₄NS, 2c ; C₇H₅N₂, 2d ; Ar = C₆H₂tBu₂ (2,4), R = C₃H₂NS, 2b ) have been synthesized and characterized. Structure of complex 2c was further confirmed by X‐ray crystallographic analysis. The complexes were investigated as the catalysts for ethylene polymerization in the presence of Et₂AlCl. Complexes 2a–d exhibited high catalytic activities (up to 22.8 kg polyethylene/mmol_V h bar), and affording polymer with unimodal molecular weight distributions at 25–70 °C in the first 5‐min polymerization, whereas produced bimodal molecular weight distribution polymers at 70 °C when polymerization time prolonged to 30 min. The catalyst structure plays an important role in controlling the molecular weight and molecular weight distribution of the resultant polymers produced in 30 min polymerization. In addition, ethylene/hexene copolymerizations with catalysts 2a–d were also explored in the presence of Et₂AlCl, which leads to the high molecular weight and unimodal distributions copolymers with high comonomer incorporation. Catalytic activity, comonomer incorporation, and polymer molecular weight can be controlled over a wide range by the variation of catalyst structure and the reaction parameters, such as comonomer feed concentration, polymerization time, and polymerization reaction temperature. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3573–3582, 2009     

Olefin polymerization with Me4Cp–Amido complexes with electron‐withdrawing groups

A series of Me₄Cp–amido complexes {[η⁵:η¹‐(Me₄C₅)SiMe₂NR]TiCl₂; R = t‐Bu, 1 ; C₆H₅, 2 ; C₆F₅, 3 ; SO₂Ph, 4 ; or SO₂Me, 5 } were prepared and investigated for olefin polymerization in the presence of methylaluminoxane (MAO). X‐ray crystallography of complexes 3 and 4 revealed very long Ti N bonds relative to the bonds of 1 . These complexes were employed for ethylene–styrene copolymerizations, styrene homopolymerizations, and propylene homopolymerizations in the presence of MAO. The productivities of the catalysts derived from 3 – 5 were much lower than the productivity of the catalyst derived from 1 for the propylene polymerizations and ethylene–styrene copolymerizations, whereas the styrene polymerization activities were much higher for the catalysts derived from 3 – 5 than for the catalyst derived from 1 . The polymerization behavior of the catalysts derived from the metallocenes 3 – 5 were more reminiscent of monocyclopentadienyl titanocene Cp′TiX₃/MAO catalysts than of CpATiX₂/MAO catalysts such as 1 containing alkylamido ligands. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4649–4660, 2000     

Efficient terpolymerization of ethylene and styrene with α‐olefins by aryloxo‐modified half‐titanocene‐based catalysts and cocatalyst systems

Aryloxo‐modified half‐titanocenes, Cp′TiCl₂(O‐2,6‐ⁱPr₂C₆H₃) [Cp′ = Cp* ( 1 ), ^tBuC₅H₄ ( 2 )], catalyze terpolymerization of ethylene and styrene with α‐olefin (1‐hexene and 1‐decene) efficiently in the presence of cocatalyst, affording high‐molecular‐weight polymers with unimodal distributions (compositions). Efficient comonomer incorporations have been achieved by these catalysts. The content of each comonomer (α‐olefin, styrene, etc.) could be controlled by varying the comonomer concentration charged, and resonances ascribed to styrene and α‐olefin repeated insertion were negligible. The terpolymerization with p‐methylstyrene (p‐MS) in place of styrene also proceeded in the presence of [PhN(H)Me₂][B(C₆F₅)₄] and AlⁱBu₃ cocatalyst, and p‐MS was incorporated in an efficient matter, affording high‐molecular‐weight polymers with uniform molecular weight distributions. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2565–2574     

Phosphine (oxide)‐(thio) phenolate palladium complexes: Synthesis,characterization and (co)polymerization of norbornene

A series of palladium complexes ( 2a–2g ) ( 2a : [6‐^tBu‐2‐PPh₂‐C₆H₃O]PdMe(Py); 2b : [6‐C₆F₅–2‐PPh₂‐C₆H₃O]PdMe(Py); 2c : [6‐^tBu‐2‐PPh^tBu‐C₆H₃O]PdMe(Py); 2d : [2‐PPh^tBu‐C₆H₄O] PdMe(Py); 2e : [6‐SiMe₃–2‐PPh₂‐C₆H₃O]PdMe(Py); 2f : [2‐^tBu‐6‐(Ph₂P=O)‐C₆H₃O]PdMe(Py); 2g : [6‐SiMe₃–2‐(Ph₂P=O)‐C₆H₃S]PdMe(Py)) bearing phosphine (oxide)‐(thio) phenolate ligand have been efficiently synthesized and characterized. The solid‐state structures of complexes 2d , 2f and 2g have been further confirmed by single‐crystal X‐ray diffraction, which revealed a square‐planar geometry of palladium center. In the presence of B(C₆F₅)₃, these complexes can be used as catalysts to polymerize norbornene (NB) with relatively high yields, producing vinyl‐addition polymers. Interestingly, 2a /B(C₆F₅)₃ system catalyzed the polymerization of NB in living polymerization manner at high temperature (polydispersity index 1.07, M_n up to 1.5 × 10⁴). The co‐polymerization of NB and polar monomers was also studied using catalysts 2a and 2f . All the obtained co‐polymers could dissolve in common solvent.     

Ansa‐Complexes of [Mn(η5‐C5H5)(η6‐C6H6)]: Preparation,Characterization, and Reactivity of [n]Manganoarenophanes (n=1, 2, 3)

We report the synthesis of [n]manganoarenophanes (n=1, 2) featuring boron, silicon, germanium, and tin as ansa‐bridging elements. Their preparation was achieved by salt‐elimination reactions of the dilithiated precursor [Mn(η⁵‐C₅H₄Li)(η⁶‐C₆H₅Li)]?pmdta (pmdta=N,N,N′,N′,N′′‐pentamethyldiethylenetriamine) with corresponding element dichlorides. Besides characterization by multinuclear NMR spectroscopy and elemental analysis, the identity of two single‐atom‐bridged derivatives, [Mn(η⁵‐C₅H₄)(η⁶‐C₆H₅)SntBu₂] and [Mn(η⁵‐C₅H₄)(η⁶‐C₆H₅)SiPh₂], could also be determined by X‐ray structural analysis. We investigated for the first time the reactivity of these ansa‐cyclopentadienyl–benzene manganese compounds. The reaction of the distannyl‐bridged complex [Mn(η⁵‐C₅H₄)(η⁶‐C₆H₅)Sn₂tBu₄] with elemental sulfur was shown to proceed through the expected oxidative addition of the Sn?Sn bond to give a triatomic ansa‐bridge. The investigation of the ring‐opening polymerization (ROP) capability of [Mn(η⁵‐C₅H₄)(η⁶‐C₆H₅)SntBu₂] with [Pt(PEt₃)₃] showed that an unexpected, unselective insertion into the C_ipso?Sn bonds of [Mn(η⁵‐C₅H₄)(η⁶‐C₆H₅)SntBu₂] had occurred.     

Synthesis of Globular Precursors

o‐Carborane (C₂B₁₀H₁₂) was adapted to perform as the core of globular macromolecules, dendrons or dendrimers. To meet this objective, precisely defined substitution patterns of terminal olefin groups on the carborane framework were subjected to Heck cross‐coupling reactions or hydroboration leading to hydroxyl terminated arms. These led to new terminal groups (chloro, bromo, and tosyl leaving groups, organic acid, and azide) that permitted ester production, click chemistry, and oxonium ring opening to be performed as examples of reactions that demonstrate the wide possibilities of the globular icosahedral carboranes to produce new dendritic or dendrimer‐like structures. Polyanionic species were obtained in high yield through the ring‐opening reaction of cyclic oxonium compound [3,3′‐Co(8‐C₄H₈O₂‐1,2‐C₂B₉H₁₀)(1′,2′‐C₂B₉H₁₁)] by using terminal hydroxyl groups as nucleophiles. These new polyanionic compounds that contain multiple metallacarborane clusters at their periphery may prove useful as new classes of compounds for boron neutron capture therapy with enhanced water solubility and as cores to make a new class of high‐boron globular macromolecules.     

Direct Synthesis of Titanium Complexes with Chelating cis‐9,10‐Dihydrophenanthrenediamide Ligands through Sequential C?C Bond‐Forming Reactions from o‐Metalated Arylimines

A series of new titanium(IV) complexes with o‐metalated arylimine and/or cis‐9,10‐dihydrophenanthrenediamide ligands, [o‐C₆H₄(CH?NR)TiCl₃] (R=2,6‐iPr₂C₆H₃ ( 3 a ), 2,6‐Me₂C₆H₃ ( 3 b ), tBu ( 3 c )), [cis‐9,10‐PhenH₂(NR)₂TiCl₂] (PhenH₂=9,10‐dihydrophenanthrene; R=2,6‐iPr₂C₆H₃ ( 4 a ), 2,6‐Me₂C₆H₃ ( 4 b ), tBu ( 4 c )), [{cis‐9,10‐PhenH₂(NR)₂}{o‐C₆H₄(HC?NR)}TiCl] (R=2,6‐iPr₂C₆H₃ ( 5 a ), 2,6‐Me₂C₆H₃ ( 5 b ), tBu ( 5 c )), have been synthesised from the reactions of TiCl₄ with o‐C₆H₄(CH?NR)Li (R=2,6‐iPr₂C₆H₃, 2,6‐Me₂C₆H₃, tBu). Complexes 4 and 5 were formed unexpectedly from the reactions of TiCl₄ with two or three equivalents of the corresponding o‐C₆H₄(CH?NR)Li followed by sequential intramolecular C? C bond‐forming reductive elimination and oxidative coupling reactions. Attempts to isolate the intermediates, [{o‐C₆H₄(CH?NR)}₂TiCl₂] ( 2 ), were unsuccessful. All complexes were characterised by ¹H and ¹³C NMR spectroscopy, and the molecular structures of 3 a , 4 a – c , 5 a , and 5 c were determined by X‐ray crystallography.     

N‐(2‐benzimidazolylquinolin‐8‐yl)benzamidate half‐titanocene chlorides: Synthesis,characterization and their catalytic behavior toward ethylene polymerization

A series of N‐(2‐benzimidazolyquinolin‐8‐yl)benzamidate half‐titanocene chlorides, Cp′TiLCl ( C1 – C8 : Cp′ = C₅H₅, MeC₅H₄, or C₅Me₅; L = N‐(benzimidazolyquinolin‐8‐yl)benzamides)), was synthesized by the KCl elimination reaction of half‐titanocene trichlorides with the correspondent potassium N‐(2‐benzimidazolyquinolin‐8‐yl)benzamide. These half‐titanocene complexes were fully characterized by elemental and NMR analyses, and the molecular structures of complexes C2 and C8 were determined by the single‐crystal X‐ray diffraction. The high stability of the pentamethylcyclopentadienyl complex ( C8 ) was evident by no decomposing nature of its solution in air for one week. The oxo‐bridged dimeric complex ( C9 ) was isolated from the solution of the corresponding cyclopentadienyl complex ( C3 ) solution in air. Complexes C1 – C8 exhibited good to high catalytic activities toward ethylene polymerization and ethylene/α‐olefin copolymerization in the presence of methylaluminoxane (MAO) cocatalyst. In the typical catalytic system of C1/ MAO, the polymerization productivities were enhanced with either elevating reaction temperature or increasing the ratio of MAO to titanium precursor. In general, it was observed that higher the catalytic activity of the catalytic system lower the molecular weight of polyethylene. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3154–3169, 2009