MnCo<Subscript>2</Subscript>O<Subscript>4</Subscript> nanoparticles with excellent catalytic activity in thermal decomposition of ammonium perchlorate

MnCo₂O₄ spinel nanoparticles (NPs) have been prepared using Aloe vera gel solution. The characterization of prepared spinel was performed applying Fourier transform infrared spectroscopy, X-ray diffraction, Raman spectroscopy, transmission electron spectroscope, scanning electron microscope and dynamic light scattering. The results manifested that the prepared nanoparticles were mainly spherical plus minor agglomeration with average size distribution between 35 and 60 nm. The catalytic activity of the prepared nanoparticles upon thermal degradation of ammonium perchlorate (AP) was evaluated applying differential scanning calorimetry and thermogravimetry instruments. MnCo₂O₄ nanoparticles increased the released heat of AP from 450 to 1480 J g^?1 and decreased the decomposition temperature from 420 to 293 °C. The kinetic parameters obtained from Kissinger methods showed that the activation energy of AP thermal decomposition in the presence of MnCo₂O₄ NPs considerably decreased. Also, a mechanism has been proposed in the presence of catalyst for the process of thermal decomposition of AP.     

Preparation and characterization of luminescent cellulose–Y<Subscript>4</Subscript>Si<Subscript>2</Subscript>O<Subscript>7</Subscript>N<Subscript>2</Subscript>:Ce<Superscript>4+</Superscript> hybrid hydrogels

Novel luminescent bio-based hydrogels comprising cellulose and Y₄Si₂O₇N₂:Ce⁴⁺ (YC) were prepared in an alkali/urea aqueous system using epichlorohydrin as a cross-linker. The structure, characteristics and properties of the hydrogels were investigated by various techniques, including FTIR spectroscopy, wideangle X-ray diffraction, scanning electron microscopy, etc. The results showed that when the content of YC was less than 0.05 g, the YC particles were tightly embedded in the macro porous of cellulose matrix, which not only supplied cavities for YC immobilization, but also supplied the pore wall to protect the structure and character of YC. Hence, the cellulose–YC hybrid hydrogels exhibited strong cyan fluorescence under a UV lamp. However, excess of YC particles were enshrouded in the cellulose matrix resulted in smaller pores, weaker fluorescence intensity, lower swelling ratio and higher mechanical properties.     

Thermal behavior of Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>/TiO<Subscript>2</Subscript> mesoporous gels

Summary Titania-based photocatalytic materials were prepared by sol-gel method using Fe³⁺ and polyethyleneglycol (PEG₆₀₀) as additives. Thermogravimetry (TG), differential thermal analysis (DTA) and evolved gas analysis (EGA) with MS detection were used to elucidate processes that take place during heating of Fe³⁺ containing titania gels. The microstructure development of the Fe₂O₃/TiO₂ gel samples with and without PEG₆₀₀ admixtures was characterized by emanation thermal analysis (ETA) under in situ heating in air. A mathematical model was used for the evaluation of ETA results. Surface area and porosity measurements of the samples dried at 120&deg;C and the samples preheated for 1 h to 300 and 500&deg;C were compared. From the XRD measurements it was confirmed that the crystallization of anatase took place after thermal heating up to 600&deg;C.     

Rapid dissolution of spruce cellulose in H<Subscript>2</Subscript>SO<Subscript>4</Subscript> aqueous solution at low temperature

Dissolution of cellulose is the key challenge in its applications. It has been discovered that spruce cellulose with high molecular weight (4.10 × 10⁵ g mol^?1) can be dissolved in 64 wt% H₂SO₄ aqueous solution at low temperature within 2 min, and the cellulose concentration in solution can reach as high as 5 % (w/v). FT-IR spectra and XRD spectra proved that it is a direct solvent for cellulose rather than a derivative aqueous solution system. The cold H₂SO₄ aqueous solution broke the hydrogen bonds among cellulose molecules and the low temperature dramatically slowed down the hydrolysis, which led to the dissolution of cellulose. The resultant cellulose solution was relatively stable, and the molecular weight of cellulose only slightly decreased after storage at ?20 °C for 1 h. Due to the high molecular weight of cellulose, cellulose solution could form regenerated films with good mechanical properties and transparency at low concentration (2 % w/v). This work has not only provided the new evidence of cellulose dissolution which facilitated the development of cellulose solvent, but also suggested a convenient way to directly transfer cellulose with high molecular weight into materials without structure modifications.     

Low-temperature heat capacity and high-temperature thermal behavior of sodium lutetium molybdate phosphate Na<Subscript>2</Subscript>Lu(MoO<Subscript>4</Subscript>)(PO<Subscript>4</Subscript>)

The low-temperature heat capacity of Na₂Lu (MoO₄)(PO₄) was measured by adiabatic calorimetry in the range of 7.47–345.74 K. The experimental data were used to calculate the thermodynamic functions of Na₂Lu (MoO₄)(PO₄). At 298.15 K, the following values were obtained: C _p ⁰ (298.15 K) = 237.7 ± 0.1 J/(K mol), S ⁰(298.15 K) = 278.1 ± 0.8 J/(K mol), H ⁰(298.15 K) ? H ⁰ (0 K) = 42330 ± 20 J/mol, and Φ⁰(298.15 K) = 136.1 ± 0. 3 J/(K mol). A heat capacity anomaly was found in the range of 10-67 K with a maximum at T _tr = 39.18 K. The entropy and enthalpy of transition are ΔS = 12.39 ± 0.75 J/(K mol) and ΔH = 403 ± 16 J/mol. The thermal investigation of sodium lutetium molybdate phosphate in the high-temperature range (623–1223 K) was performed using differential scanning calorimetry. It was found that during melting in the range of 1030–1200 K, Na₂Lu(MoO₄)(PO₄) degrades to simpler compounds; the degradation scenario is verified by X-ray powder diffraction.     

Synthesis of the mixed oxide catalysts based upon the nickel-copper hydrotalcites of the type Ni<Subscript>x</Subscript>Cu<Subscript>6-x</Subscript>Cr<Subscript>2</Subscript>(OH)<Subscript>16</Subscript>(CO<Subscript>3</Subscript>)×4H<Subscript>2</Subscript>O

Summary High resolution TG coupled to a gas evolution mass spectrometer has been used to study the thermal properties of a chromium based series of Ni/Cu hydrotalcites of formulae Ni_xCu_6-xCr₂(OH)₁₆(CO₃)×4H₂O where x varied from 6 to 0. The effect of increased Cu composition results in the increase of the endotherms and mass loss steps to higher temperatures. Evolved gas mass spectrometry shows that water is lost in a number of steps and that the interlayer carbonate anion is lost simultaneously with hydroxyl units. Differential scanning calorimetry was used to determine the heat flow steps for the thermal decomposition of the synthetic hydrotalcites. Hydrotalcites in which M²⁺ consist of Cu, Ni or Co form important precursors for mixed metal-oxide catalysts. The application of these mixed metal oxides is in the wet catalytic oxidation of low concentrations of retractable organics in water. Therefore, the thermal behaviour of synthetic hydrotalcites, Ni_xCu_6-xCr₂(OH)₁₆CO₃×nH₂O was studied by thermal analysis techniques in order to determine the correct temperatures for the synthesis of the mixed metal oxides.     

Hydrolysis of cellulose by the heteropoly acid H<Subscript>3</Subscript>PW<Subscript>12</Subscript>O<Subscript>40</Subscript>

The potential of heteropoly acid H₃PW₁₂O₄₀ to catalyze the hydrolysis of cellulose to glucose under hydrothermal conditions was explored. This technology could contribute to sustainable societies in the future by using cellulose biomass. A study to optimize the reaction conditions, such as the amount of catalyst, reaction time, temperature, and the amount of cellulose used, was performed. A remarkably high yield of glucose (50.5%) and selectivity higher than 90% at 453 K for 2 h with a mass ratio of cellulose to H₃PW₁₂O₄₀ of 0.42 were achieved. This was attributed to the high hydrothermal stability and the excellent catalytic properties, such as the strong Brønsted acid sites. This homogeneous catalyst can be recycled for reuse by extraction with diethyl ether. The results illustrate that H₃PW₁₂O₄₀ is an environmentally benign acid catalyst for the hydrolysis of cellulose.     

Synthesis,characterisation and photocatalytic activity of Ag<Superscript>+</Superscript>- and Sn<Superscript>2+</Superscript>-substituted KSbTeO<Subscript>6</Subscript>

Ag⁺- and Sn²⁺-substituted KSbTeO₆ were prepared by a facile ion-exchange method at ambient temperature. All the samples were characterised by scanning electron microscopy, energy-dispersive spectra, thermogravimetric analysis, powder X-ray diffraction, Raman spectra and UV-VIS diffuse reflectance spectra. Both Sn²⁺- and Ag⁺-substituted KSbTeO₆ were crystallised in a cubic lattice with the \(Fd\bar 3m\) space group. The band-gap energy of all the samples was deduced from their UV-VIS diffuse reflectance spectral profiles. The visible light-induced photocatalytic oxidation of the methylene blue (MB) dye was examined in the presence of all the as-prepared materials. The Ag⁺- and Sn²⁺-substituted KSbTeO₆ exhibited a higher photocatalytic activity than the parent KSbTeO₆ in degradation of the MB dye under visible light irradiation.     

Thermal decomposition of [Cd(NH<Subscript>3</Subscript>)<Subscript>6</Subscript>](NO<Subscript>3</Subscript>)<Subscript>2</Subscript>

Thermal decomposition of [Cd(NH₃)₆](NO₃)₂ was studied by thermogravimetry (TG) with simultaneous differential thermal analysis (SDTA) for two samples and at two different sets of measurement parameters. The gaseous products of the decomposition were on-line identified by evolved gas analysis (EGA) with a quadruple mass spectrometer (QMS). The decomposition of the title compound proceeds, for both cases, in the three main stages. In the first stage, deammination of [Cd(NH₃)₆](NO₃)₂ to [Cd(NH₃)](NO₃)₂ undergoes by three steps and 5/6 of all NH₃ molecules are liberated. At second stage the liberation of residual 1/6NH₃ molecules and the formation of Cd(NO₃)₂ undergoes. However, during this process simultaneously a two-step oxidation of a part of ammonia molecules also takes place. In a first step as a result a mixture of ammonia, water vapour and nitrogen is formatted. At the second step, subsequent oxidation of a next part of NH₃ molecules undergoes. As a result, a mixture of nitrogen oxide, nitrogen and water vapour is formatted, what for these both steps clearly indicates the EGA analysis. The third stage of the thermal decomposition is connected with the melting and subsequent decomposition of residual Cd(NO₃)₂ to oxygen, nitrogen dioxide and solid CdO. Additionally, third sample was measured by differential scanning calorimetry (DSC) and the results are fully consistent with those obtained by TG.     

Cellulose scaffolds modulated synthesis of Co<Subscript>3</Subscript>O<Subscript>4</Subscript> nanocrystals: preparation,characterization and properties

Magnetic Co₃O₄ nanoparticles were prepared by using microporous regenerated cellulose films as sacrificial scaffolds. The cellulose macromolecules and the porous structure of the films made them used as spatially confined reacting sites where Co(OH)₂ nanoparticles could be synthesized in situ. When the cellulose matrix was removed by sintering at 500 °C, Co₃O₄ nanoparticles were obtained. XRD and XPS indicated that the prepared nanoparticles were pure Co₃O₄ without any impurity. TEM and SEM images revealed that the particle size of the nanoparticles was smaller than 100 nm. The nanoparticles had weak ferromagnetic properties at 25 °C. Furthermore, the pronounced quantum confinement effects of the synthesized nanoparticles have been observed, the optical bandgap energies determined were about 1.92 ~ 2.12 and 2.74 ~ 2.76 eV for O²⁻ → Co³⁺ and O²⁻ → Co²⁺ charge-transfer processes, respectively. Furthermore, the resulted Co₃O₄ nanoparticles behaved stable electrochemical performance with promising applications in the electrode for lithium ion battery.     

Phase transition and thermal decomposition of [Al(DMSO)<Subscript>6</Subscript>]Cl<Subscript>3</Subscript>

Phase transition and thermal decomposition of hexadimethylsulfoxidealuminium chloride were studied by differential scanning calorimetry (DSC), thermogravimetry (TG) and simultaneous differential thermal analysis (SDTA). The gaseous products of the decomposition were on-line identified by a quadrupole mass spectrometer (QMS). In the temperature range of 95–300 K, [Al(DMSO)₆]Cl₃ indicates one phase transition at T _c^h=244.96 K (on heating) and at T _c^c=220.87 K (on cooling). Large thermal hysteresis of the phase transition (∼24 K) indicates its first order character. Large value of transition entropy (ΔS≈40 J mol⁻¹ K⁻¹) suggests its configurational character. Thermal decomposition of the title compound proceeds in four main stages. In the first stage, which starts just above ca. 300 K, the compound loses two DMSO molecules per one formula unit and undergoes into [Al(DMSO)₄]Cl₃. In the second stage, the next three DMSO ligands are released and simultaneously decomposed. The third stage, which continues up to ca. 552 K, is connected with a loss of the last DMSO ligand and the formation of AlCl₃. In the fourth stage AlCl₃ reacts with carbon monoxide that originates from the decomposition of DMSO, and first aluminium oxychloride and next solid Al₂O₃ plus carbon are created.     

Thermal analysis of CsH<Subscript>2</Subscript>PO<Subscript>4</Subscript> nanoparticles using surfactants CTAB and F-68

A study concerned to thermogravimetric analysis is performed in cesium dihydrogen phosphate (CsH₂PO₄) that was synthesized, using cetyltrimethylammonium-bromide (CTAB), polyoxyethylene-polyoxypropylene (F-68) and mixture of (F-68:CTAB) with two mole ratio 0.06 and 0.12 as surfactant. The dehydration behavior of particles was studied using thermal gravimetric analysis and differential scanning calorimetric. Subsequently, the experimental results indicated that the first dehydration temperature in the range of 237–239 °C upon heating, the second peaks occur at temperature range 290–295 °C and overlapping in the thermogravimetric events is observed. The mass loss values are obtained in the range of 6.62–6.97 wt% that is less than reported theoretical value 7.8 wt%. These values show well compatibility of reaction CsH₂PO₄ to Cs₂H₂P₂O₇ with 3.92 wt% whereas mass loss value of CsH₂PO₄ to CsPO₃ is less than theoretical value 7.8 wt%. The activation energy of two steps dehydration are calculated using Kissinger equation for the samples synthesized via CTAB and (F-68) with minimum value mass loss 6.62% and maximum value mass loss 6.97%, respectively. The calculation results reveal that the reaction rate in the first step (CsH₂PO₄ → Cs₂H₂P₂O₇) is faster than the second step (CsH₂PO₄ → CsPO₃). The weight loss values of the samples demonstrate that existence of CTAB can be considered as effective factor which prevents more weight loss during the dehydration process.     

Thermal study of TiO<Subscript>2</Subscript>–CeO<Subscript>2</Subscript> yellow ceramic pigment obtained by the Pechini method

TiO₂–CeO₂ oxides for application as ceramic pigments were synthesized by the Pechini method. In the present work the polymeric network of the pigment precursor was studied using thermal analysis. Results obtained using TG and DTA showed the occurrence of three main mass loss stages and profiles associated to the decomposition of the organic matter and crystallization. The kinetics of the degradation was evaluated by means of TG applying different heating rates. The activation energies (E _a) and reaction order (n) for each stage were determined using Horowitz–Metzger, Coats–Redfern, Kissinger and Broido methods. Values of E _a varying between 257–267 kJ mol^–1 and n=0–1 were found. According to the kinetic analysis the decomposition reactions were diffusion controlled.     

Thermal analysis on C<Subscript>6</Subscript>H<Subscript>10</Subscript>Ge<Subscript>2</Subscript>O<Subscript>7</Subscript>-doped MgB<Subscript>2</Subscript>

Additives to MgB₂ can improve the superconducting functional characteristics, such as critical current density (J _c) and irreversibility field (H _irr). Recently, we have shown that repagermanium (C₆H₁₀Ge₂O₇) is an effective additive, enhancing both J _c and H _irr. To look into details of the processes taking place during the reactive sintering, a thermal analysis study (0.167 K s^?1, in Ar) is reported. We used differential scanning calorimetry between 298 and 863 K and simultaneous thermogravimetric—differential thermal analysis between 298 and 1233 K. Samples were mixtures of powders with composition 97 mol% MgB₂ and 3 mol% C₆H₁₀Ge₂O₇. Up to 863 K, repagermanium decomposes by multiple steps and forms amorphous phases. A reaction with MgB₂ is not observed. Above this temperature, partial decomposition of MgB₂ occurs. Crystalline Ge and MgO are detected before formation of Mg₂Ge and MgB₄, when temperature approaches the melting point of Ge (1211 K). Carbon substitution for boron in the crystal lattice of MgB₂ is observed for samples heated above 863 K. The amount of substitutional C does not significantly change with temperature.     

MgFe<Subscript>2</Subscript>O<Subscript>4</Subscript>/cellulose/SO<Subscript>3</Subscript>H nanocomposite: a new biopolymer-based nanocatalyst for one-pot multicomponent syntheses of polysubstituted tetrahydropyridines and dihydropyrimidinones

A new biopolymer cellulose-based magnetic heterogeneous catalyst, MgFe₂O₄/cellulose/SO₃H nanocomposite, was prepared. Fourier-transform infrared spectra, X-ray diffraction, energy-dispersive X-ray, field-emission scanning electron microscopy, thermal analysis (TG, DTG and DSC), dynamic light scattering and vibrating sample magnetometer measurements have been used to characterize the catalyst. Then, it was applied efficiently as an inexpensive and green catalyst in two multicomponent syntheses of polysubstituted tetrahydropyridines and dihydropyrimidinones under solvent-free conditions. The nanocatalyst can be recovered and reused several times without significant loss of catalytic activity.     

High-temperature thermal behaviour of Cr-Doped LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> spinels synthesized by the sucrose-aided combustion method

Chromium doped spinels LiCr_YMn_2−YO₄ (0.2≤Y≤0.8) has been synthesized by the sucrose-aided combustion procedure. The thermal behaviour, phase homogeneity and structural characteristics of the samples were studied by thermal analysis, coupled mass spectrometry, and room-and high-temperature X-ray diffraction methods. It was found that the ‘as prepared’ samples contained residual organic impurities undetectable for X-ray diffraction, that burn out completely at 400°C. Samples treated between 400 and 750°C are single phase spinels, whose crystallites size increase from 10 to 50 nm on increasing the temperature. Cr-doping enhances the thermal stability of the spinels, which augments on increasing the Cr content Y. The enhanced thermal stability of the spinels has been accounted for based on the high excess stabilization energy of Cr³⁺ in octahedral ligand field.     

A study of complexation between crystalline <Emphasis Type="Italic">trans</Emphasis>-[Pd(H<Subscript>2</Subscript>O)<Subscript>2</Subscript>(NO<Subscript>3</Subscript>)<Subscript>2</Subscript>] and acetylacetone

Complexation between crystalline trans-[Pd(H₂O)₂(NO₃)₂] and acetylacetone was studied. The complexes Pd₂(Acac)₂(μ-NO₃)₂(I) and Pd₂(Acac)₂(μ-Acac)(μ-NO₃)(II) were obtained and examined by elemental analysis, X-ray powder diffraction analysis, differential scanning calorimetry, simultaneous thermal analysis, mass spectrometry, and vibrational spectroscopy.     

Phase relationships in the SiO<Subscript>2</Subscript>-TiO<Subscript>2</Subscript> system

Phase equilibria in a miscibility gap of the SiO₂-TiO₂ system were studied. A visual polythermal analysis and annealing of samples were performed in a Galakhov microfurnace. The microstructure and composition of the obtained samples were investigated by scanning electron microscopy and electron probe microanalysis. A critical analysis of the experimental data was made. Thermodynamically optimized based on the sub-regular solution model, a phase diagram of the SiO₂-TiO₂ system was constructed.     

PW based phase change nanocomposites containing <Emphasis Type="Italic">γ</Emphasis>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>

Phase change nanocomposites were prepared by dispersing γ-Al₂O₃ nanoparticles into melting paraffin wax (PW). Intensive sonication was used to make well dispersed and homogeneous composites. Differential scanning calorimetric (DSC) and transient short-hot-wire (SHW) method were employed to measure the thermal properties of the composites. The composites decreased the latent heat thermal energy storage capacity, L _s, and melting point, T _m, compared with those of the PW. Interestingly, the composites with low mass fraction of the nanoparticles, have higher latent heat capacity than the calculated latent heat capacity value. The thermal conductivity of the nanocomposites was enhanced and increased with the mass fraction of Al₂O₃ in both liquid state and solid state.     

Synthesis and characterization of macroporous Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>/C composites as cathode materials for Li-ion batteries

The macroporous Li₃V₂(PO₄)₃/C composite was synthesized by oxalic acid-assisted carbon thermal reaction, and the common Li₃V₂(PO₄)₃/C composite was also prepared for comparison. These samples were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), and electrochemical performance tests. Based on XRD and SEM results, the sample has monoclinic structure and macroporous morphology when oxalic acid is introduced. Electrochemical tests show that the macroporous Li₃V₂(PO₄)₃/C sample has a high initial discharge capacity (130 mAh g⁻¹ at 0.1 C) and a reversible discharge capacity of 124.9 mAh g⁻¹ over 20 cycles. Moreover, the discharge capacity of the sample is still 91.5 mAh g⁻¹, even at a high rate of 2 C, which is better than that of the sample with common morphology. The improvement in electrochemical performance should be attributed to its improved lithium ion diffusion coefficient for the macroporous morphology, which was verfied by cyclic voltammetry and electrochemical impedance spectroscopy.