等浓度的氯化铵和硫酸铵溶液哪个pH高

有中学化学参考资料题:0.10 mol/L的NH4Cl和(NH4)2SO4溶液哪个pH值高?这似乎是个中学生可做的简单题目,仔细考虑不是如此.如果简单地认为盐酸和硫酸都是强酸,而硫酸是二元酸,硫酸铵溶液中铵盐浓度为0.20 mol/L,那么NH4Cl溶液pH高,那是不妥的.硫酸是二元酸,第一个氢离子能完全电离,第二个氢离子部分电离,如此考虑情况怎么样呢?是不是答案发生变化?这要通过计算来说明.     

Enhanced efficiency and stability in Sn-based perovskite solar cells with secondary crystallization growth

The conversion efficiencies reported for Tin(Sn)halide-based perovskite solar cells(PSCs)fall a large gap behind those of lead halide-based PSCs,mainly because of poor film quality of the former.Here we report an efficient strategy based on a simple secondary crystallization growth(SCG)technique to improve film quality for tin halide-based PSCs by applying a series of functional amine chlorides on the perovskite surface.They were discovered to enhance the film crystallinity and suppress the oxidation of Sn²⁺remarkably,hence reduce trap state density and non-irradiative recombination in the absorber films.Furthermore,the SCG film holds the band levels matching better with carrier transport layers and herein favoring charge extraction at the device interfaces.Consequently,a champion device efficiency of 8.07% was achieved alo ng with significant enhancements in VOC and JSC,in contrast to 5.35% of the control device value.Moreover,the SCG film-based devices also exhibit superior stability comparing with the control one.This work explicitly paves a novel and general strategy for developing high performance lead-free PSCs.     

Energy level engineering of charge selective contact and halide perovskite by modulating band offset:Mechanistic insights

Mixed cation and anion based perovskites solar cells exhibited enhanced stability under outdoor conditions,however,it yielded limited power conversion efficiency when TiO₂ and Spiro-OMeTAD were employed as electron and hole transport layer(ETL/HTL)respectively.The inevitable interfacial recombination of charge carriers at ETL/perovskite and perovskite/HTL interface diminished the efficiency in planar(n-i-p)perovskite solar cells.By employing computational approach for uni-dimensional device simulator,the effect of band offset on charge recombination at both interfaces was investigated.We noted that it acquired cliff structure when the conduction band minimum of the ETL was lower than that of the perovskite,and thus maximized interfacial recombination.However,if the conduction band minimum of ETL is higher than perovskite,a spike structure is formed,which improve the performance of solar cell.An optimum value of conduction band offset allows to reach performance of 25.21%,with an open circuit voltage(VOC)of 1231 mV,a current density JSC of 24.57 mA/cm² and a fill factor of 83.28%.Additionally,we found that beyond the optimum offset value,large spike structure could decrease the performance.With an optimized energy level of Spiro-OMeTAD and the thickness of mixed-perovskite layer performance of 26.56% can be attained.Our results demonstrate a detailed understanding about the energy level tuning between the charge selective layers and perovskite and how the improvement in PV performance can be achieved by adjusting the energy level offset.     

Recent Advances of Pure Organic Room Temperature Phosphorescence Materials for Bioimaging Applications

Bioimaging,as a powerful and helpful tool,which allows people to investigate deeply within living organisms,has contributed a lot for both clinical theranostics and scientific research.Pure organic room temperature phosphorescence(RTP)materials with the unique features of ultralong luminescence lifetime and large Stokes shift,can efficiently avoid biological autofluorescence and scattered light through a time-resolved imaging modality,and thus are attracting increasing attention.This review classifies pure organic RTP materials into three categories,including small molecule RTP materials,polymer RTP materials and supramolecular RTP materials,and summarizes the recent advances of pure organic RTP materials for bioimaging applications.     

A new strategy to access Co/N co-doped carbon nanotubes as oxygen reduction reaction catalysts

Carbon nanotubes(CNTs),as one-dimensional nanomaterials,show great potential in energy conversion and storage due to their efficient electrical conductivity and mass transfer.However,the security risks,time-consuming and high cost of the preparation process hinder its further application.Here,we develop that a negative pressure rather than a following gas environment can promote the generation of cobalt and nitrogen co-doped CNTs(Co/N-CNTs) by using cobalt zeolitic imidazolate framework(ZIF-67) as a precursor,in which the negative pressure plays a key role in adjusting the size of cobalt nanoparticles and stimulating the rearragement of carbon atoms for forming CNTs.Importantly,the obtained Co/N-CNTs,with high content of pyridinic nitrogen and abundant graphitized structure,exhibit superior catalytic activity for oxygen reduction reaction(ORR) with half-wave potential(E_1/2) of 0.85 V and durability in terms of the minimum current loss(2%) after the 30,000 s test.Our development provides a new pathway for large-scale and cost-effective preparation of metal-doped CNTs for various applications.     

Stabilizing High-voltage Cathode Materials for Next-generation Li-ion Batteries

The pressing demand for high-energy/power lithium-ion batteries requires the deployment of cathode materials with higher capacity and output voltage.Despite more than ten years of research,high-voltage cathode mate-rials,such as high-voltage layered oxides,spinel LiNi0.5Mn1.5O4,and high-voltage polyanionic compounds still cannot be commercially viable due to the instabilities of standard electrolytes,cathode materials,and cathode electrolyte interphases under high-voltage operation.This paper summarizes the recent advances in addressing the surface and interface issues haunting the application of high-voltage cathode materials.The understanding of the limitations and advantages of different modification protocols will direct the future endeavours on advancing high-energy/power lithium-ion batteries.     

Suppressing trap states and energy loss by optimizing vertical phase distribution through ternary strategy in organic solar cells

Suppressing the trap-state density and the energy loss via ternary strategy was demonstrated.Favorable vertical phase distribution with donors(acceptors)accumulated(depleted)at the interface of active layer and charge extraction layer can be obtained by introducing appropriate amount of polymer acceptor N2200 into the systems of PBDB-T:IT-M and PBDB-TF:Y6.In addition,N2200 is gradiently distributed in the vertical direction in the ternary blend film.Various measurements were carried out to study the effects of N2200 on the binary systems.It was found that the optimized morphology especially in vertical direction can significantly decrease the trap state density of the binary blend films,which is beneficial for the charge transport and collection.All these features enable an obvious decrease in charge recombination in both PBDB-T:IT-M and PBDB-TF:Y6 based organic solar cells(OSCs),and power conversion efficiencies(PCEs)of 12.5%and 16.42%were obtained for the ternary OSCs,respectively.This work indicates that it is an effective method to suppress the trap state density and thus improve the device performance through ternary strategy.     

Conformational Properties of Comb-shaped Polyelectrolytes with Negatively Charged Backbone and Neutral Side Chains Studied by a Generic Coarse-grained Bead-and-Spring Model

A generic coarse-grained bead-and-spring model,mapped onto comb-shaped polycarboxylate-based(PCE)superplasticizers,is developed and studied by Langevin molecular dynamics simulations with implicit solvent and explicit counterions.The agreement on the radius of gyration of the PCEs with experiments shows that our model can be useful in studying the equilibrium sizes of PCEs in solution.The effects of ionic strength,side-chain number,and side-chain length on the conformational behavior of PCEs in solution are explored.Single-chain equilibrium properties,including the radius of gyration,end-to-end distance and persistenee length of the polymer backbone,shape-asphericity parameter,and the mean span dimension,are determined.It is found that with the increase of ionic strength,the equilibrium sizes of the polymers decrease only slightly,and a linear dependenew of the persistence length of backbone on the Debye screening length is found,in good agreement with the theory developed by Dobrynin.Increasing side-chain numbers and/or side-chain lengths increases not only the equilibrium sizes(radius of gyration and mean span)of the polymer as a whole,but also the persistence length of the backbone due to excluded volume interactions.     

Three-dimensionalization via control of laser-structuring parameters for high energy and high power lithium-ion battery under various operating conditions

Laser-structuring is an effective method to promote ion diffusion and improve the performance of lithium-ion battery(LIB)electrodes.In this work,the effects of laser structuring parameters(groove pitch and depth)on the fundamental characteristics of LIB electrode,such as interfacial area,internal resistances,material loss and electrochemical performance,are investigated,LiNi_0.5Co_0.2Mn_0.3O₂ cathodes were structured by a femtosecond laser by varying groove depth and pitch,which resulted in a material loss of 5%-14%and an increase of 140%-260%in the in terfacial area between electrode surface and electrolyte.It is shown that the importance of groove depth and pitch on the electrochemical performance(specific capacity and areal discharge capacity)of laser-structured electrode varies with current rates.Groove pitch is more im porta nt at low current rate but groove depth is at high curre nt rate.From the mapping of lithium concentration within the electrodes of varying groove depth and pitch by laser-induced breakdown spectroscopy,it is verified that the groove functions as a diffusion path for lithium ions.The ionic,electronic,and charge transfer resistances measured with symmetric and half cells showed that these internal resistances are differently affected by laser structuring parameters and the changes in porosity,ionic diffusion and electronic pathways.It is demonstrated that the laser structuring parameters for maximum electrode performance and minimum capacity loss should be determined in consideration of the main operating conditions of LIBs.     

Mesh-like vertical structures enable both high areal capacity and excellent rate capability

In order to balance electrochemical kinetics with loading level for achieving efficient energy storage with high areal capacity and good rate capability simultaneously for wearable electronics,herein,2 D meshlike vertical structures(NiCo_2 S_4@Ni(OH)_2) with a high mass loading of 2.17 mg cm^-2 and combined merits of both 1 D nanowires and 2 D nanosheets are designed for fabricating flexible hybrid supercapacitors.Particularly,the seamlessly interconnected NiCo_2 S_4 core not only provides high capacity of 287.5 μAh cm^-2 but also functions as conductive skeleton for fast electron transport;Ni(OH)_2 sheath occupying the voids in NiCo_2 S_4 meshes contributes extra capacity of 248.4 μAh cm^-2;the holey features guarantee rapid ion diffusion along and across NiCO_2 S_4@Ni(OH)_2 meshes.The resultant flexible electrode exhibits a high areal capacity of 535.9 μAh cm^-2(246.9 mAh g^-1) at 3 mA cm^-2 and outstanding rate performance with 84.7% retention at 30 mA cm^-2,suggesting efficient utilization of both NiCo_2 S_4 and Ni(OH)_2 with specific capacities approaching to their theoretical values.The flexible solid-state hybrid device based on NiCo_2 S_4@Ni(OH)_2 cathode and Fe_2 O_3 anode delivers a high energy density of 315 μWh cm^-2 at the power density of 2.14 mW cm^-2 with excellent electrochemical cycling stability.     

Contributions to the Chemistry of the Binary Compounds of the Transition Elements

Phase and structural relationships of the sulfur, selenium, and tellurium compounds of the 4d and 5d transition elements of groups IV to VII of the periodic system are discussed. Homologous elements behave very similarly with respect to the chalcogens, and this is particularly the case for niobium and tantalum, and for molybdenum and tungsten. However, zirconium, niobium, and molybdenum have a greater tendency towards formation of chalcogen-poor phases than their homologues hafnium, tantalum, and tungsten. Subchalcogenides are known only for zirconium and niobium. The number of phases and the tendency towards formation of solid solutions are considerably smaller among the tellurides than among the sulfides and selenides. The crystal structures of the telluride phases also differ from those of the sulfide and selenide phases of analogous composition. In addition, a review of the phase and structural relationships of the arsenic and antimony compounds of the 4d and 5d transition elements of groups V to VII is given.     

LOW DENSITY POLYETHYLENE/CLAY NANOCOMPOSITES MODIFIED BY ETHYLENE COPOLYMERS： EFFECTS OF FUNCTIONALIZED SEGMENTS ON MORPHOLOGY

Melt extrusion was used to prepare binary nanocomposites of ethylene copolymers and organoclay and trinary nanocomposites of low-density polyethylene （LDPE）, ethylene copolymer and organoclay. X-ray diffraction （XRD） and transmission electron microscopy （TEM） were used to analyze the structure of the clay phase and the morphology of the nanocomposites. Influences of the comonomer in the copolymer and the content of the copolymer on the morphology of the resulting nanocomposites were discussed. The binary and the trinary composites may form intercalated or exfoliated structures depending on the interaction between the copolymer and the clay layers and the content of the copolymer.     

纳米粒子的精准组装

纳米材料由于其独特的光、电、磁、力学等性质,成为了构建功能材料与器件的理想基元。实现纳米粒子的精确组装,是探究粒子之间的耦合聚集性质和制备宏观功能器件的基础。但是由于纳米粒子的小尺寸以及在溶液中运动的随机性与复杂性,精准控制纳米粒子组装体的形貌以及在空间中的相对位置仍存在巨大挑战。为了将纳米粒子组装成理想的有序结构,许多控制粒子组装的策略与方法得到发展。本文首先概述了纳米粒子自组装的控制方法与典型形貌,着重分析了影响粒子精准排布的因素与控制方法,并对纳米粒子及其组装体的光学性质与器件应用的最新研究进展进行了讨论,最后对目前纳米粒子精准组装所面临的挑战以及未来发展的方向进行了展望。     

电流变液中悬浮颗粒的体积与形状的变化

基于偶极近似,运用电极化方法,定量研究了电流变液中悬浮颗粒在外电场作用下其体积和形状的变化,并计算了其体积和形状的相对变化率.研究结果表明:悬浮颗粒的体积和形状的相对变化率均与电场强度的平方成正比,并与ER本身的性质有关.一般情况下,颗粒的体积和形状的相对变化率分别为8.4%和12.5%,对总体积变化率的贡献为1.68%.这种变化对于ER系统的电涨和电热都作出了贡献,仅当将颗粒当作刚性球时,其自由能才与电场强度的平方成正比.     

Spectrophotometric determination of the dissociation constants of crown ethers with grafted acridone unit in methanol based on Benesi-Hildebrand evaluation

As potential chromo- and fluorophores for optical sensors a number of acridone grafted crown ethers containing NO2 group(s) and/or Br or Cl atom(s) in the aromatic rings (compounds) were studied by spectrophotometric method. In the first step of this work the acid-base and complexing properties of these compounds as well as those of the acridone, thioacridone and 4,5-dinitroacridone were investigated. Compounds proved to be very week acids and therefore the conventional spectrophotometric method based on the measurement of the ratio of the protonated/deprotonated forms of the compounds was not applicable for the determination of the dissociation constants (pKa values). Thus, a new spectrophotometric approach was elaborated for the pKa determination of these compounds, which is based on spectrophotometric titration in methanol with strong base and the titration results were evaluated by the Benesi-Hildebrand method. (In the studies with TEAOH, TMAOH and LiOMe, the complex formation between the ionophores and the cations of the bases could be excluded.) As it was expected, the experimentally determined pKa values depended on the nature of the substituents of the acridone moiety and pKa values ranged between 12.6 and 14.9. The lower pKa value of thioacridone compared to the acridone can be explained by the larger size of the sulfur atom. The outstandingly larger pKa value for 4,5-dinitroacridone can be attributed to the formation of intramolecular hydrogen-bonds between the ortho-position nitro group and the NH proton. As a trend, the strong electron withdrawing nitro substituents decreased considerably the pKa values of compounds and compared to that of the halogen (Cl and Br) atoms (for example compounds and) of weaker withdrawing effect.     

3,7-二硝基亚氨基-2,4-二氮杂双环[3,3,0]辛烷的放热分解反应动力学

The kinetic parameters of the exothermic decomposition reaction of the title compound in a temperature-programmed mode have been studied by means of DSC. The DSC data obtained are fitted to the integral, differential and exothermic rate equations by linear least-squares, iterative, combined dichotomous and least-squares methods, respectively. After establishing the most probable general expression of differential and integral mechanism functions by the logical choice method, the corresponding values of the apparent activation energy (Ea), pre-exponential factor (A) and reaction order (n) will be obtained by the exothermic rate equation. The results show that the empirical kinetic model function in differential form and the values of Ea and A of this reaction are (1-α)0.44, 230.4 kJ/mol and 1018.16 s-1, respectively. With the help of the heating rate and obtained kinelic parameters, the kinetic equation of the exothermic decomposition reaction process of the title compound is proposed. The critical temperature of thermal explosion of the compound is 302.6℃. The above-mentioned kinetic parameters are quite useful for analyzing and evaluating the stability and thermal change rule of the title compound.     

PROPERTIES AND MORPHOLOGY OF UNSATURATED POLYESTER/ACRYLATE-TERMINATED POLYURETHANE/ORGANOMONTMORILLONITE NANOCOMPOSITES

Unsaturated polyester resin （UPR）/acrylate-terminated polyurethane （ATPU）/organo-modified montmorillonite （OMMT） nanocomposites were prepared by the in situ intercalative polymerization method. Samples were prepared by the sequential mixing, i.e. mixture of the ATPU and styrene （S） and OMMT were prepared in the first step; UPR was then added to the pre-intercalates of ATPU/S/OMMT. Results indicate that the mechanical properties and thermal properties of UPR/ATPU/OMMT nanocomposites greatly depend on the amount of ATPU and OMMT. Results show that the addition of ATPU could increase the impact strength of UPR/ATPU composites, but the tensile strength, flexural strength and heat resistance of the materials are obviously decreased. When the weight ratio between UPR, ATPU and OMMT were 82：15：3, the impact strength and heat distortion-temperature of nanocomposite were greatly improved, meanwhile there was little change for other properties of the nanocomposites. The synergistic enhancement effects of ATPU and OMMT on the composites were observed. The structures and morphology of the composites were investigated by X-ray diffraction, scanning electron microscopy and transmission electron microscopy.     

Applications of Thermal Analysis and Coupled Techniques in Pharmaceutical Industry

Thermal analysis methods are well-established techniques in research laboratories of pharmaceutical industry. The robustness and sensitivity of instrumentation, the introduction of automation and of reliable software according to the industrial needs widened considerably the areas of applications in the last decade. Calibration of instruments and validation of results follow the state of the art of cGMP as for other analytical techniques. Thermal analysis techniques are especially useful for the study of the behavior of the poly-phasic systems drug substances and excipients and find a unique place for new delivery systems. Since change of temperature and moisture occur by processing and storage, changes of the solid state may have a considerable effect on activity, toxicity and stability of compounds. Current requirements of the International Conference of Harmonisation for the characterization and the quantitation of polymorphism in new entities re-enforce the position of thermal analysis techniques. This challenging task needs the use of complementary methods. Combined techniques and microcalorimetry demonstrate their advantages. This article reviews the current use of thermal analysis and combined techniques in research and development and in production. The advantage of commercially coupled techniques to thermogravimetry is emphasized with some examples. This revised version was published online in August 2006 with corrections to the Cover Date.     

Statistical Theory of Stable and Meta-stable Transition for Crystallization and Fusion of Homopolymers Ⅵ. Statistical Dynamics of Polymeric Crystallization by Molecular Segregation-Dependence of Crystal Growth Rate on the Grown Mechanism and Concentratio

First a short review on the dependence of crystal growth rate on the growth mechanism and concentration is present. Based on the structural model of micronucleus and crystal constituent chains, and the feature of statistical dynamics for polymeric crystallization by molecular segregation, a general method for characterizing number the growth rate and micro crystal constituent chains and the size growth rate for crystals was proposed. According to this method, a set of quantitative expressions for correlating the growth rate in number and size with the four types of growth (folding, extending and combination of folding and extending), the crystalline temperature and the crystalline concentration was derived. Then combined the concentration index is combined with the fraction of conformation for segments, a new correlation of the concentration index to the temperature of crystallization and the flexibility of polymeric chain is theoretically obtained. The dependences of the index on the different types of growth are also studied. Finally the relationships between the growth rate for crystals and the concentration of solution were verified by the experimental validating the predictions made by the theory.