基于金属有机框架化合物纳米电催化剂的研究进展

金属有机框架化合物具有比表面积大、孔隙率高、结构有序可控等特点,近年来作为电催化材料在电化学能源储存和转化应用中备受关注。本文从金属有机框架化合物作为前驱体制备电催化剂的独特优点入手,总结了目前该类材料在电催化领域的最新研究进展,并对其今后的发展趋势以及面临的机遇和挑战进行了简单的展望。     

导电金属有机框架材料在电催化中的成就，挑战和机遇

To fulfill the demands of green and sustainable energy, the production of novel catalysts for different energy conversion processes is critical. Owing to the intriguing advantages of the intrinsic active species, tunable crystal structure, remarkable chemical and physical properties, and good stability, metal-organic frameworks (MOFs) have been extensively investigated in various electrochemical energy conversions, such as the CO₂ reduction reaction, N₂ reduction reaction, oxygen evolution reaction, hydrogen evolution reaction, and oxygen reduction reaction. More importantly, it is feasible to change the chemical environments, pore sizes, and porosity of MOFs, which will theoretically facilitate the diffusion of reactants across the open porous networks, thereby improving the electrocatalytic performance. However, owing to the high energy barriers of charge transfer and limited free charge carriers, most MOFs show poor electrical conductivity, thus limiting their diverse applications. As reported previously, MOFs were used as a porous substrate to confine the growth of nanoparticles or co-doped electrocatalysts after annealing. The conductive MOFs can combine the advantages of conventional MOFs with electronic conductivity, which significantly enhance the electrocatalytic performance. In addition, conductive MOFs can achieve conductivity via electronic or ionic routes without post-annealing treatment, thereby extending their potential applications. Different synthesis strategies have recently been developed to endow MOFs with electrical conductivity, such as post-synthesis modification, guest molecule introduction, and composite formatting. The performance of conductive MOFs can even outperform those of commercial RuO₂ catalysts or Pt-group catalysts. However, it is difficult to endow most MOFs with high conductivity. This review summarizes the mechanisms of constructing conductive MOFs, such as redox hopping, through-bond pathways, through-space pathways, extended conjugation, and guest-promoted transport. Synthetic methods, including hydro/solvothermal synthesis and interface-assisted synthesis, are introduced. Recent advances in the use of conductive MOFs as heterogeneous catalysts in electrocatalysis have been comprehensively elucidated. It has been reported that conductive MOFs can demonstrate considerable catalytic activity, selectivity, and stability in different electrochemical reactions, revealing the immense potential for future displacement of Pt-group catalysts. Finally, the challenges and opportunities of conductive MOFs in electrocatalysis are discussed. Based on systematic synthesis strategies, more conductive MOFs can be constructed for electrocatalytic reactions. In addition, the morphology and structure of conductive MOFs, which can change the electrochemical accessibility between substrates and MOFs, are also crucial for catalysis, and thus, they should be extensively studied in the future. It is believed that a breakthrough for high-performance conductive MOF-based electrocatalysts could be achieved.     

氧还原和析氧反应的双功能电催化剂--氮磷共掺碳负载四氧化三钴

金属-空气电池具备诸多优势,譬如绿色环保、能量转化率高、启动快速、能量密度高、使用寿命和干态存储时间长等.与燃料电池相比,金属-空气电池结构简单,放电电压平稳,成本低,但依然存在一些制约发展的问题,如阴极催化剂.阴极催化剂在金属-空气电池中发挥催化氧还原反应(oxygen reduction reaction, ORR)和析氧反应(oxygen evolution reac-tion, OER)的关键作用.铂及其合金常用作 ORR的单功能催化剂,而钌和铱等是目前 OER催化效率最高的,但 ORR活性很低,因此需要开发出一种廉价而又具备双功能催化作用的催化剂.单异原子掺杂的碳基催化剂的研究集中在 ORR催化性能上,而多异原子共掺碳最近有研究表明具有双催化氧的性质,如氮磷共掺碳.在这些氮磷共掺的碳架中,氮磷共掺物起着 OER催化作用,掺氮物为 ORR催化的活性位点,而掺磷物起着强化作用.异原子掺杂负载的钴基催化剂(如掺氮还原氧化石墨烯载 Co3O4)是近年来双功能催化剂研究的另一个热点.钴基催化剂有着催化 ORR和 OER的多价价态,然而其本身导电性能差,这一缺陷可通过杂化石墨化碳来弥补,石墨化碳有着优良的导电性能.据我们所知,目前仍没有关于氮磷共掺碳负载的 Co3O4双催化氧的研究.我们合成了氮磷共掺碳(NPC)负载的 Co3O4(Co3O4/NPC),并首次探索了其氧还原和析氧性能. Co3O4/NPC合成分两步进行.首先通过三聚氰胺与植酸之间的酯化或缩聚覆盖在导电炭黑颗粒表面,在保护气氛下焙烧得到 NPC,然后经溶剂热反应以及空气中氧化合成 Co3O4/NPC.催化剂的性能综合考虑了催化活性和稳定性两方面.采用线性扫描伏安法评估了 OER和 ORR的催化活性.对于 OER, Co3O4/NPC的起始电势是0.54 V (以饱和甘汞电极为参比电极),在0.80 V时电流密度达到21.95 mA/cm2,均优于 Co3O4/C和 NPC. Co3O4/NPC的高效 OER催化可归因于氮磷共掺物与 Co3O4之间的协同作用.对于 ORR, Co3O4/NPC的催化效率与商用 Pt/C相近,它们的扩散极限电流密度分别为–4.49和–4.76 mA/cm2(E =–0.80 V).在 ORR过程中, Co3O4起到主要的催化作用.采用计时电流(电流-时间)法评估了催化剂的稳定性.经6 h测定,对于 OER, Co3O4/NPC剩46%电流;而对于 ORR,剩95%电流.整体而言, Co3O4/NPC在 OER和 ORR中都表现出高的催化效率以及良好的稳定性.     

双金属导电金属有机框架材料Ni/Co-CAT的制备及其氧还原催化性能研究

以2,3,6,7,10,11 -六羟基三亚苯(2,3,6,7,10,11-Hexahydroxytriphenylene, HHTP)为有机配体, Ni、Co为金属中心, 通过水热法制备了对应的儿茶酚酯盐(Ni-catecholate、Ni-Co-catecholate, 以下简称Ni-CAT和Ni-Co-CAT). 对其进行表征后, 选用单室反应器装置搭建微生物燃料电池(Microbial fuel cell, MFC). 将Ni-CAT和Ni-Co-CAT与炭黑以3∶1的质量比混合后应用于MFC阴极催化氧还原反应(Oxygen reduction reaction, ORR). 结果表明, Ni-Co-CAT催化的MFC反应器性能最好, 其MFC反应器的最大输出电压和功率密度分别为310 mV和190 mW/cm², 与商业Pt/C的性能相当. Ni-Co-CAT催化MFC的极限电流密度为2.84 mA/cm², 优于Ni-CAT的2.18 mA/cm², 表明在Ni-CAT结构中引入Co后, MFC产电效能得到了提升. 主要原因是, Ni-Co-CAT与炭黑充分混合后, 具有了更高的孔隙率和比表面积, 其结构上的金属位点M-O₆ (M=Ni或Co)提供了更多的催化活性, 使Ni-Co-CAT具有最优的电化学催化性能.     

基于金属有机框架衍生的Fe-N-C纳米复合材料作为高效的氧还原催化剂

Environmentally friendly and renewable energy technologies, such as fuel cells and metal-air batteries, hold great promise for solving current energy and environmental challenges. The oxygen reduction reaction (ORR) plays a pivotal role in this top-drawer question. However, the sluggish kinetics of the ORR and prohibitive costs limit the global scalability of such devices. Traditionally, platinum-based electrocatalysts exhibit the best performance for ORRs in both acid and alkaline electrolytes. However, to significantly reduce the cost and realize sustainable development, utilization of Pt must be replaced or significantly reduced in the ORR cathode for fuel cell applications. Therefore, developing earth-abundant and high-performance non-precious metal catalysts (NPMCs) for ORR is of critical importance for the commercialization of fuel cells. In comparison to traditional catalysts, metal-organic frameworks (MOFs) are ideal precursors that integrate metal, nitrogen, and carbon functionalities together into one ordered 3D crystal structure. MOFs, assembled by secondary building of units comprised of metals and organic linkers with strong bonding, have received significant research attention because they possess permanent porosity, a three-dimensional (3D) structure, and can be prepared using a diversity of metals and organic linkers. High surface area, and microporous carbon materials can be easily obtained by carbonization of MOFs at high temperatures. In particular, MOF-derived carbon nanocomposites, which were prepared from transition metals, and have the form M-N-C (M = Fe or Co), have demonstrated remarkably improved catalytic activity and stability. Herein, we report an NPMC material consisting of Fe₃C nanoparticles encapsulated in mesoporous N-doped carbon (Fe-N-C), synthesized by a simple strategy involving physical mixing of MIL-100(Fe) with glucose and urea, and subsequent pyrolysis under inert atmosphere. The strong interaction between metal atoms and nitrogen atoms is beneficial in generating more active sites, and sites with a higher intrinsic catalytic activity, via carbonization. The as-obtained catalysts exhibit remarkable ORR activity in alkaline media, with the best catalyst (Fe-N-C-900, which is synthesized at 900 ℃) featuring a more positive onset potential (0.96 V vs the reversible hydrogen electrode (RHE)), a more positive half-wave potential (0.83 V vs RHE), a much higher diffusion limiting current density (6.28 mA·cm^-2) and a larger electron-transfer number (n), even at low overpotentials, compared with other contrast materials. Fe-N-C-900's excellent catalytic activity and stability in ORR are due to its large BET surface area, its large total pore volume, its nitrogen dopants, its active Fe₃C nanoparticles and the cooperative effects among its reactive functionalities.     

金属-空气电池中双功能电催化剂微纳结构设计（英文）

金属-空气二次电池在可再生电能的存储和转换方面具有广阔的应用前景.在金属-空气二次电池的空气侧,放电时发生氧还原反应(ORR),充电时发生氧析出反应(OER).然而, ORR和OER反应的动力学过程缓慢,因此限制了金属-空气二次电池的实际应用.因此,发展高性能ORR和OER电催化剂对金属-空气二次电池的发展尤为重要.目前,大多数的研究集中在ORR或OER的单功能电催化剂上,而关于双功能电催化剂的研究和综述相对较少.两个反应均具有较高的过电位和较缓慢的动力学过程,而且充电过程的高电压会导致ORR催化剂失活,反之亦然.因此,开发针对这两个反应均具有高活性和高稳定性的双功能电催化剂极具挑战性.近年来,研究者对具有低成本和高性能双功能电催化剂进行了探索.这些双功能电催化剂包括碳基材料,过渡金属材料和复合材料.双功能电催化剂可以通过提高本征活性和表观活性两种策略来提高其整体的活性.其中,本征活性与晶体结构和电子结构密切相关,即可以通过调节晶体结构和电子结构来提高其本征活性.例如,可以改变金属-氧键的强度、氧空位浓度等来调变电催化活性.在碳基材料中掺杂杂原子可以改变碳的电荷密度分布,从而实现对电催...     

含氮金属有机框架衍生的铜基催化剂电催化还原二氧化碳

With the development of human society and economy, the demand for energy resources has also increased rapidly. However, the use of traditional fossil energy leads to high amounts of carbon dioxide emissions, causing severe greenhouse effects. This, in turn, triggers a series of environmental problems. Harnessing renewable energy such as solar energy, wind energy, and hydropower to replace the traditional energy sources is very urgent. Conversion CO₂ into value-added fuels and chemicals could be a useful strategy to mitigate the current energy and environmental crisis. It is well known that Cu-based materials are good electrocatalysts for the electrochemical reduction of CO₂ (ECR-CO₂). However, they suffer from some disadvantages such as high overpotential and poor selectivity and durability. Therefore, the development of copper based electrocatalysts with high activity and selectivity is essential.     

泡沫镍原位负载双金属AlCo层状双氢氧化物纳米催化剂高效电催化析氧反应

经一步水热法在泡沫镍（NF）上原位生长获得了AlCo-LDH/NF （LDH=层状双氢氧化物）催化剂。基于AlCo-LDH的高表面积和良好相界面,催化剂表现出了优异的电催化析氧反应（OER）活性。在碱性介质中,当电流密度为200 mA·cm^-2时,AlCo₃-LDH/NF催化剂具有419 mV的低过电位和50.04 mV·dec^-1的低Tafel斜率。     

NiCo2O4/MXene Hybrid as an Efficient Bifunctional Electrocatalyst for Oxygen Evolution and Reduction Reaction

For the advancement of electrochemical energy conversion and storage technologies, bifunctional electrocatalysts are crucial for efficiently driving both the oxygen evolution (OER) and reduction reactions (ORR). Cobalt-based spinel oxides are a class of promising bifunctional electrocatalysts. However their low electrical conductivity and stability may hinder further improvement. A novel composite material composed of NiCo₂O₄ nanoparticles integrated with emerging two dimensional MXene nanosheets (NiCo₂O₄/MXene) was developed. The successful integration of NiCo₂O₄ with MXene brings about a number of attractive structural features. This includes synergistic effects between NiCo₂O₄ and MXene, highly accessible surface areas, complete exposure of numerous active sites, and excellent electronic conductivity, all of which collectively contribute to the desirability of composite material for OER and ORR. The synthesized NiCo₂O₄/MXene composite showed extraordinary OER electrocatalytic activity with a lower overpotential of 360 mV at a current density of 10 mA/cm², and a small Tafel slope of 64 mV/dec compared to NiCo₂O₄, MXene and NiCo₂O₄+MXene (physically mixed). Additionally, NiCo₂O₄/MXene displays an ORR limiting current density of −4 mA/cm² and exhibited highest onset potential and half wave potential of 0.92 V and 0.72 V vs. RHE, respectively, for the ORR in alkaline media compared to NiCo₂O₄, MXene and NiCo₂O₄+MXene (physically mixed).     

Bifunctional Electrocatalyst with 0D/2D Heterostructure for Highly Efficient Hydrogen and Oxygen Generation

A novel MoS₂ quantum dots/CoSe₂ nanosheet (MoS₂ QDs/CoSe₂) hybrid with 0D/2D heterostructure has been developed. The CoSe₂ nanosheets (NSs) enable an excellent oxygen evolution reaction (OER) activity with increasing vacancy configuration on one hand, while the MoS₂ QDs serve as an eminent hydrogen evolution reaction (HER) catalyst on the other. By integrating MoS₂ QDs and CoSe₂ NSs, the hybrid exhibits excellent electrocatalytic performances in HER and OER. The unique 0D/2D hetero‐interface increases the exposed active sites and facilitates electron transfer, thereby boosting the electrocatalytic activity. Relatively low overpotentials of 82 mV and 280 mV are required to drive the current density of 10 mA/cm² for HER and OER, with corresponding Tafel slopes of 69 and 75 mV/dec, respectively. As such, this work provides an efficient yet simple approach to construct bifunctional electrocatalysts with enhanced activity and stability.     

One-step In-situ Synthesis of Vacancy-rich CoFe2O4@Defective Graphene Hybrids as Bifunctional Oxygen Electrocatalysts for Rechargeable Zn-Air Batteries

Developing efficient catalysts toward both oxygen reduction reaction(ORR) and oxygen evolution reaction(OER) is the core task for rechargeable metal-air batteries. Although integration of two active components should be an effective method to produce the bifunctional catalysts in principle, traditional techniques still can not attain fine tunable surface structure during material-hybridization process. Herein, we present a facile short-time in-situ argon(Ar) plasma strategy to fabricate a high-performance bifunctional hybrid catalyst of vacancy-rich CoFe₂O₄ synergized with defective graphene(r-CoFe₂O₄@DG). Reflected by the low voltage gap of 0.79 V in two half-reaction measurements, the striking capability to catalyze ORR/OER endows it excellent and durable performance in rechargeable Zn-air batteries, with a maximum power density of 155.2 mW/cm² and robust stability(up to 60 h). Further experimental and theoretical studies validate its remarkable bifunctional energetics root from plasma-induced surface vacancy defects and interfacial charge polarization between DG and CoFe₂O₄. This work offers more opportunities for reliable clean energy systems by rational interfacial and defect engineering on catalyst design.     

N‐Doped Carbon Aerogel Derived from a Metal–Organic Framework Foam as an Efficient Electrocatalyst for Oxygen Reduction

Metal–organic frameworks (MOFs) are promising alternative precursors for the fabrication of heteroatom‐doped carbon materials for energy storage and conversion. However, the direct pyrolysis of bulk MOFs usually gives microporous carbonaceous materials, which significantly hinder the mass transportation and the accessibility of active sites. Herein, N‐doped carbon aerogels with hierarchical micro‐, meso‐, and macropores were fabricated through one‐step pyrolysis of zeolitic imidazolate framework‐8/carboxymethylcellulose composite gel. Owing to the hierarchical porosity, high specific surface area, favorable conductivity, excellent thermal and chemical stability, the as‐prepared N‐doped carbon aerogel exhibits excellent oxygen reduction reaction (ORR) activity, long‐term durability, and good methanol tolerance in alkaline medium. This work thus provides a new way to fabricate new types of MOF‐derived carbon aerogels for various applications.     

Hollow Nanotube Ru/Cu2+1O Supported on Copper Foam as a Bifunctional Catalyst for Overall Water Splitting

Hydrogen energy is considered as one of the ideal clean energies for solving the energy shortage and environmental issues, and developing highly efficient electrocatalysts for overall water splitting to produce hydrogen is still a huge challenge. Herein, for the first time, Ru-doped Cu₂₊₁O vertically arranged nanotube arrays in situ grown on Cu foam (Ru/Cu₂₊₁O NT/CuF) are reported and further investigated for their catalytic properties for overall water splitting. The Ru/Cu₂₊₁O NT/CuF presents ultrahigh catalytic activities for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline conditions, and it exhibits a small overpotential of 32 mV at 10 mA cm⁻² in the HER, and only needs 210 mV overpotential to achieve a current density of 10 mA cm⁻² in the OER. Importantly, the alkaline electrolyzer using Ru/Cu₂₊₁O NT/CuF as a bifunctional electrocatalyst only needs 1.53 V voltage to deliver a current density of 10 mA cm⁻², which is much lower than the benchmark of IrO₂(+)/Pt(−) counterpart (1.64 V at 10 mA cm⁻²). The excellent performance of the Ru/Cu₂₊₁O NT/CuF catalyst is attributed to its high conductive substrate and special Ru-doped nanotube structure, which provides a high electrochemical active surface area and 3D gas diffusion channel.     

Advanced Bifunctional Oxygen Reduction and Evolution Electrocatalyst Derived from Surface‐Mounted Metal–Organic Frameworks

Metal–organic frameworks (MOFs) and their derivatives are considered as promising catalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), which are important for many energy provision technologies, such as electrolyzers, fuel cells and some types of advanced batteries. In this work, a “strain modulation” approach has been applied through the use of surface‐mounted NiFe‐MOFs in order to design an advanced bifunctional ORR/OER electrocatalyst. The material exhibits an excellent OER activity in alkaline media, reaching an industrially relevant current density of 200 mA cm^?2 at an overpotential of only ≈210 mV. It demonstrates operational long‐term stability even at a high current density of 500 mA cm^?2 and exhibits the so far narrowest “overpotential window” ΔE_ORR‐OER of 0.69 V in 0.1 m KOH with a mass loading being two orders of magnitude lower than that of benchmark electrocatalysts.     

Flower-like Fe-Co-M (M=S,O, P and Se) Nanosheet Arrays Grown on Nickel Foam as High-efficiency Bifunctional Electrocatalysts

The development of highly efficient, inexpensive, abundant and non-precious metal electrocatalysts is the lifeblood of the hydrogen production industry, especially the hydrogen production industry by electrolysis of water. A Fe-Co-S/NF bifunctional electrocatalyst with nanoflower-like structure was synthesized on three-dimensional porous nickel foam through one-step hydrothermal and one-step high-temperature sulfuration operations, and the material displays high-efficiency electrocatalytic performance. As a catalyst for the hydrogen evolution reaction, Fe-Co-S/NF can drive a current density of 10 mA/cm² at an overpotential of 143 mV with a Tafel slope of 80.2 mV/dec. When it was used as an oxygen evolution reaction catalyst, it exhibits good OER reactivity with a low Tafel slope (82.6 mV/dec) and with requiring only 117 mV overpotential to drive current densities up to 50 mA/cm². In addition, the Fe-Co-S/NF//Fe-Co-S/NF electrolytic cell was assembled, an electrolysis voltage of 1.64 V is required to drive a current density of 50 mA/cm², which is one of the most active catalysts reported so far. This work indicates that the introduction of S, P and Se treating processes could effectively improve electrical conductivity of the material and enhance the catalytic activity of the material. This work offers an effective and convenient method for improving the morphology of the catalyst, increasing the surface area of the catalyst and developing high-efficiency and low-cost catalysts.     

Hierarchical Rhree-dimensional CoNi LDH-Ni3S2 Supported on Ni Foam as a Stable and Efficient Electrocatalytic Material for Overall Water Splitting

Herein, a novel self-supporting three-dimensional nanostructured CoNi LDH-Ni₃S₂ catalyst was generated in a two-step process combining hydrothermal synthesis and high-temperature electrodeposition techniques. The CoNi LDH-Ni₃S₂/NF electrode exhibits superior electrocatalytic performance with low overpotentials of 193 and 382 mV in 1 M KOH to drive a high current density of 100 mA cm⁻² for HER and OER, respectively. Meanwhile, a small cell voltage of 1.51 V was obtained upon using CoNi LDH-Ni₃S₂/NF as a dual-functional catalyst. Additionally, CoNi LDH-Ni₃S₂/NF exhibits high stability with almost no change in HER and OER overpotentials and electrocatalytic total decomposition of water within 80,000 s.