水性黏结剂海藻酸钠和果胶酸钠对锂离子电池石墨负极电化学性能的影响

利用循环伏安和恒电流充放电测试,结合扫描电镜观测,研究了水性黏结剂海藻酸钠和果胶酸钠对石墨负极电化学性能的影响.结果表明,石墨负极在这两种黏结剂中均可以进行有效的嵌锂脱锂循环,且电化学循环性能较好,50次循环后可逆比容量损失不超过5%.两种水性黏结剂在改善石墨电极的嵌脱锂循环性能方面具有较好的发展前景.     

粒度对石墨负极材料嵌锂性能的影响

研究了不同粒径（13～80 μm）石墨材料作为锂离子电池负极材料的嵌锂性能.结果表明，石墨粒度大小对嵌锂性能有明显影响，石墨的不可逆容量随着粒径的减小而逐渐增大，当粒径从80 μm减小到13 μm时，其不可逆容量增大了10％.而对可逆容量来说，随着粒径的减小，可逆容量逐渐增大;当粒径减小到20 μm时，可逆容量达到最大;再进一步减小石墨颗粒的粒径，可逆容量则随之减小.这表明石墨颗粒过大或过小都不利于锂离子的可逆脱嵌，只有合适的粒度才能最大限度地可逆脱嵌锂离子.根据不同粒度石墨的比表面的变化趋势，阐述了嵌锂性能随粒度变化的原因.     

负极材料NiO的制备及电化学性能

以Ni(NO₃)₂·6H₂O和NaOH为原料,采用水热法合成了锂离子电池负极材料NiO。通过TG-DSC分析，确定了合成过程的反应机理。通过XRD、SEM和恒流充放电测试,研究了NiO样品的结构、形貌及电化学性能。400 ℃焙烧得到立方结构的NiO产品，以0.10 mA·cm^-2充放电,首次放电比容量达到1 151 mAh·g^-1，经过20次循环后的比容量仍为776 mAh·g^-1。     

改性石墨用于锂离子电池负极

石墨可用于锂离子电池负极材料，其改性方面的研究主要有：石墨的还原、氧化、表面包膜以及物理法处理。这些方法可以改变石墨的电子状态及表面结构，能够提高石墨的性能。本文介绍了改性石墨用于锂离子电池负极的研究概况。     

锂离子电池硅基负极粘结剂发展现状

在锂离子电池负极材料的研究中，硅材料以其高达4200 mAh·g^-1的理论比容量，成为近年来新能源电池领域的研究热点.但是在锂化/去锂化过程中，硅负极体积变化高达300%，导致快速的容量衰减和较短的循环寿命.目前硅负极改性最有效的方法之一，是通过粘结剂来保持活性物质、导电添加剂和集流体间的接触完整性，减少硅材料在充放电循环过程中体积变化引起的裂化和粉碎，保持硅负极的高容量，提升电池循环性能.基于硅材料作为锂离子电池负极的优异特性，以及目前锂离子电池粘结剂的发展，将针对锂离子电池硅基负极粘结剂做出系统讨论，描述不同粘结剂对电池性能的主要影响，为锂离子电池硅基负极粘结剂的开发和应用提供研究方向.     

热处理温度对石墨复合负极材料电化学性能的影响

以球形天然石墨为原料,柠檬酸为碳源,通过喷雾造粒及高温热处理得到了高容量石墨复合(G/C)负极材料。利用X射线衍射仪(XRD)、扫描电子显微镜(SEM)和高分辨率透射电子显微镜(HRTEM)对样品物相和微观形貌进行表征,并通过恒流充放电及循环伏安(CV)研究了不同热处理温度对G/C材料电化学性能的影响。2900℃制得样品既具有石墨负极电压曲线特性,又可释放出远高于商品化石墨负极的比容量:首次循环活化后充电比容量为423mAh·g^-1,100次循环后仍高达416mAh·g^-1,容量保持率为98%。     

热处理温度对石墨复合负极材料电化学性能的影响

以球形天然石墨为原料,柠檬酸为碳源,通过喷雾造粒及高温热处理得到了高容量石墨复合(G/C)负极材料.利用X射线衍射仪(XRD)、扫描电子显微镜(SEM)和高分辨率透射电子显微镜(HRTEM)对样品物相和微观形貌进行表征,并通过恒流充放电及循环伏安(CV)研究了不同热处理温度对G/C材料电化学性能的影响.2 900 ℃制得样品既具有石墨负极电压曲线特性,又可释放出远高于商品化石墨负极的比容量:首次循环活化后充电比容量为423 mAh·g^-1,100次循环后仍高达416 mAh·g^-1,容量保持率为98%.     

氯化钠对锂离子电池石墨负极的修饰改性

Numerous carbonaceous materials have been studied as anodes of lithium ion batteries during the past several years[1￣4].Graphite was favored for battery applications because it exhibits a high specific capac- ity, low working potential close to that of l…     

电解液组成对中间相石墨微球电化学性能的影响

以2800℃热处理的煤焦油沥青基中间相石墨微球为锂离子二次电池负极材料,考察了中间相石墨微球在不同组成的电解质溶液中的电化学嵌脱锂性能.确定了试样在不同电解液中电极表面生成的SEI膜的化学组成和相对含量,剖析了共溶剂对SEI膜形成反应、膜组成和织构的影响.结果表明,在不同共溶剂的EC基电解液中,电极界面SEI膜形成的电位虽然不同,但SEI膜的化学组成基本相同,负极界面SEI膜的织构是决定电解液与电极材料相容性的关键.     

聚酰亚胺作为锂离子电池硅基负极粘结剂的研究进展

硅基负极材料是提升锂离子电池能量密度的重要材料基础,负极粘结剂性能的优劣是影响硅基负极材料推广应用的关键因素。本文全面综述了锂离子电池负极粘结剂材料的研究及应用进展,详细阐述了粘结剂对于硅基负极材料及锂离子电池电化学性能的影响,简要介绍了目前常用的羧甲基纤维素(CMC)、聚丙烯酸(PAA)、海藻酸盐(Alg)三种硅基负极粘结剂的特点,重点讨论了聚酰亚胺(PI)材料作为负极粘结剂的优势,其分子结构可设计、形变可逆、高强高模等优点有望抑制硅基负极体积膨胀并避免颗粒粉化,系统综述了目前PI在硅基负极粘结剂中的研究进展。在此基础上,为PI粘结剂后续研究提供了新的方法策略,为锂离子电池负极粘结剂的开发和应用提供了新的设计理念。     

锂离子电池快充石墨负极研究与应用

相较于传统燃油汽车,电动汽车缓慢的充电速度始终制约了其进一步推广。为电动汽车实现“加油式”快速充电能够缓解充电桩的使用压力,增加电动汽车的应用场景和市场占有率。因此,亟需开发出具有快速充放电能力的高性能锂离子电池。石墨因其低廉的价格和优异的电化学性能已经在锂离子电池负极领域得到了广泛的商业化应用,然而其较低的嵌锂电位导致在快充过程中出现析锂,损害电化学性能的同时会带来安全隐患。因此,必须对石墨进行改良处理,以适应快充技术的需要。本文系统介绍了近年来石墨负极快充化改良领域的研究进展,从成分设计,形貌调控,结构优化,电解液适配等方面进行了评述,并总结了快充石墨面临的挑战,展望了其发展前景,为推动快充技术的商业化应用提供了借鉴。     

锂离子电池快充石墨负极研究与应用

Driven by the excessive environmental pollution caused by the over-use of non-renewable fossil-derived energy, renewable energy and electrochemical energy storage devices have made great progress in the past decades. Electrochemical energy storage devices, such as lithium-ion batteries, have the advantages of high capacity, long life cycle, and good safety performance; therefore, they have been used in various applications. For example, economical and environment-friendly electric vehicles have recently taken up increasing market share. However, when compared with vehicles propelled using fossil-derived energy, the slow charging speed of electric vehicles has always restricted their further promotion. The realization of rapid charging for electric vehicles can alleviate the high-pressure usage of charging piles as well as increase the application and market share of electric vehicles. Therefore, it is important to develop high-performance lithium-ion batteries with rapid charge and discharge capacities. The fast-charging capacity of lithium-ion batteries is limited by the slow migration of lithium ions in the electrode and the electrode/electrolyte interface. Therefore, the key to developing fast-charging lithium-ion batteries lies in the successful design of suitable electrode materials. Because of its low cost and excellent electrochemical performance, graphite has been widely used to develop the cathode of lithium-ion batteries. However, the migration of lithium ions in graphite is slow, resulting in large polarization during the high-current charge and discharge processes. In addition, the low lithium intercalation potential of graphite leads to lithium precipitation during fast charging, which can decrease the electrochemical performance and cause potential safety hazards. Therefore, graphite must be improved to meet the needs of such fast-charging devices. In this article, we systematically introduce the research progress made in recent years within the scope of rapid-charging improvement of graphite(-based) cathodes and then highlight the modification strategies for graphite with the goal of achieving functional coating, desired morphological and structural design, optimized electrolyte properties, and an improved charging protocol. Additionally, this article evaluates the advantages and disadvantages of the modification strategies as well as their application prospects. The scheme of functional coating for modifying graphite must simplify the process and improve production efficiency to meet the needs of industrial development. Morphology design should ensure satisfactory initial Coulomb efficiency, while the improvement of the electrolyte properties and optimization of the charging protocol need to consider the commercialization costs. Finally, this paper proposes further evaluation of the effects of the modification strategies based on soft-pack or cylindrical batteries to strengthen the commercialization prospect of the modification strategies.      

纳米碳与石墨碳复合材料的电化学性能

在天然石墨(NG)中掺杂不同比例的碳纳米管(CNT)得到纳米碳与石墨碳的复合材料.电化学测试结果表明,在NG中掺杂质量分数为10%的CNT所得复合材料的电化学性能最好.经过20次充放电循环,该复合材料的放电容量比同样条件下的石墨提高15.9%.纳米碳管的中空式结构和不易塌陷的特点使复合材料的充放电容量和循环稳定性明显提高.     

温度对石墨电极性能的影响

运用电化学阻抗谱(EIS)并结合循环伏安法(CV)研究了石墨电极25和60 ℃时在1 mol·L-1 LiPF6-EC(碳酸乙烯酯):DEC(碳酸二乙酯):DMC(碳酸二甲酯)电解液中, 以及60 ℃时在1 mol·L-1 LiPF6-EC:DEC:DMC+5%VC(碳酸亚乙烯酯)电解液中的首次阴极极化过程. 发现高温下(60 ℃)石墨电极在1 mol·L-1 LiPF6-EC:DEC:DMC电解液中可逆循环容量衰减的主要原因在于其表面无法形成稳定的固体电解质相界面(SEI)膜. 实验结果显示, VC添加剂能够增进高温下石墨电极表面SEI膜的稳定性, 进而改进石墨电极的循环性能.     

天然石墨阳极在室温离子液体电解液中的电化学性质

对比研究了天然石墨在室温离子液体和有机电解液中的嵌脱锂性质, 探讨了添加剂提高天然石墨在离子液体电解液中电化学性质的微观机制.     

Electrochemical properties and structures of surface-fluorinated graphite for the lithium ion secondary battery

Surface modification of graphite powder has been performed by elemental fluorine and radiofrequency (rf) plasma fluorination. Both methods give rise to an enlargement of the surface areas of graphite samples and a change of the pore volume distribution. The capacities of surface-fluorinated graphite samples are higher than those of original samples and even more than the theoretical capacity of graphite, 372 mAh g⁻¹, without any reduction of the first colombic efficiencies. The increments of the capacities are ∼5, 10, and 15% for graphite samples with average particle diameters of 7, 25 and 40 μm, respectively.     

Sn-SnSb/石墨复合材料的制备及电化学性能

以柠檬酸钠为配位剂、NaBH4为还原剂，将Sn(Ⅱ)和Sb(Ⅲ)盐在水溶液中共还原制得Sn-SnSb合金。X射线衍射和扫描电镜的测试结果表明：所得合金为多相合金，颗粒大小约200 nm。将该合金粉和石墨按质量比4∶1经机械球磨形成Sn-SnSb/石墨复合材料，将其作为锂离子电池阳极材料进行电化学性能测试，结果表明，该复合材料可逆容量超过600 mAh·g^-1，具有良好的循环性能，15次循环内的稳定比容量为461 mAh·g^-1，而纯Sn-SnSb合金粉15次循环后充电比容量为337 mAh·g^-1。     

Synthesis of Monoclinic Li_(0.33)MnO_2 and Its Electrochemical Properties in Different Potential Windows

Li0.33MnO2 cathode material was synthesized by solid state reaction. The material showed a small coherent domain size about 10 nm determined by X-ray diffraction and transmission electron microscopy. The electrochemical properties of the material were studied in different potential windows of 3.5―2.0 V and 4.3―2.0 V. An irreversible transformation to spinel phase was observed in the initial several cycles, which was more prominent on cycling at 4.3―2.0 V. Electrochemical impedance spectroscopy showed that the Li+ diffusion coefficient of the material was about 2×10–9 cm2/s. Li0.33MnO2 showed a reversible discharge capacity of 140 and 200 mA·h/g in the potential windows of 3.5―2.0 V and 4.3―2.0 V, respectively. But the capacity retention at 4.3―2.0 V was poor due to the thicker spinel layer formed on the material surface.