金属有机骨架材料在轻烃分离中的应用

金属有机骨架材料(metal-organic frameworks,MOFs)是一种由金属离子或金属簇通过与有机配体自组装而形成的新型材料。近年来,金属有机骨架材料在轻烃(包括甲烷、乙炔、乙烯、乙烷、丙烯和丙烷)分离方面引起了广泛兴趣。本文简要地介绍了多种金属有机骨架材料分离不同轻烃气体的最新研究进展,并对影响分离效果的因素与研究前景进行了总结和展望。     

人工界面层在金属锂负极中的应用

金属锂具有极高的比容量(3860 mAh·g^?1)和最低的电化学反应电位(相对标准氢电位为?3.040 V),被认为是高能量密度二次电池最具潜力的负极材料。然而金属锂负极界面稳定性差、不可控的枝晶生长、沉积/剥离过程中巨大的体积变化等严重阻碍了金属锂负极的商业化应用。在金属锂表面构建一层物理化学性质稳定的人工界面保护层被认为是解决金属锂负极界面不稳定和枝晶生长,缓解体积膨胀带来的界面波动等一系列问题的有效手段。本综述依据界面传导性质,从离子导通而电子绝缘的人工固态电解质界面(SEI)层、离子/电子混合传导界面、纳米界面钝化层三个部分对人工界面保护层进行了归纳总结。分析了人工界面保护层的物质结构与性能之间的构效关系,探讨了如何提高人工界面保护层的物理化学稳定性、界面离子输运、界面强度与柔韧性、界面兼容性等。最后,指出用于金属锂负极的人工界面保护层目前面临的主要挑战,并对其未来的发展进行了展望。     

金属锂电池的热失控与安全性研究进展

锂离子电池在便携式储能器件及电动汽车领域得到了广泛应用,然而频繁发生的电池起火爆炸事故,使热失控和热安全问题备受人们关注,目前已有多篇综述报道了缓解锂离子电池热失控的措施。相比于已经接近理论比能极限的锂离子电池,金属锂负极具有更高的比容量、更低的电势和高反应活性,但是不可控的锂枝晶生长,使得金属锂电池的热失控问题更为复杂和严重。针对金属锂电池的热失控问题,本文首先介绍了热失控的诱因及基本过程和阶段,其次从材料层面综述了提高电池热安全性的多种策略,包括使用阻燃性电解质、离子液体电解质、高浓电解质和局域高浓电解质等不易燃液态电解质体系,开发高热稳定性隔膜、热响应隔膜、阻燃性隔膜和具有枝晶检测预警与枝晶消除功能的新型智能隔膜,以及研究热响应聚合物电解质,最后对金属锂电池热失控在未来的进一步研究进行了展望。     

金属有机骨架材料在催化中的应用

金属有机骨架(MOFs)材料是一种相对新型的多孔材料,由于其结构的多样性、可设计性、可剪裁性以及超高的比表面积,近年来吸引了广泛的研究兴趣,并在很多领域展现了潜在的应用前景.特别是在催化方面的应用更受到了强烈的关注.本文的前两部分主要以催化活性位点的来源进行分类,包括配位不饱和金属中心、功能性有机配体、化学修饰接入功能位点以及嵌入在MOFs孔内的金属配合物或金属纳米颗粒等,总结了近几年来MOFs及其复合材料在多相催化方向取得的一些进展.同时在后面两部分也简要地介绍了MOFs在光催化及以MOFs为模板构筑的多孔纳米材料在催化(特别是电催化)方面的一些应用.最后,对MOFs在催化方面的应用前景做了展望.     

金属有机骨架材料在二氧化碳加氢中的应用

大气中二氧化碳(CO_2)浓度的急剧增加引起了人们的关注,并提出了许多将CO_2转化为高价值化学品的策略。金属有机框架材料(MOFs)由于其独特的孔隙率、大的比表面积、丰富的孔结构、多活性中心、良好的稳定性和可回收性,可用于二氧化碳的捕获和催化转化。基于晶体多孔材料的金属有机骨架(MOF)设计和合成的各种功能纳米材料可以作为多相催化剂或载体/前体来应对这些挑战。在本文中,笔者将主要关注MOFs在催化二氧化碳加氢领域的最新研究进展,包括催化加氢制备一氧化碳、甲烷、甲酸、甲醇和烯烃,分析了基于MOFs的催化剂的合成方法和提高催化活性的原因。介绍了提高新型MOF材料的催化活性和探索新的CO_2转化可行的策略。讨论了MOF型催化剂在CO_2化学转化中的主要挑战和机遇,对本研究领域中进一步的发展进行了简要的展望。     

金属有机骨架材料在传感器中的应用

摘 要 金属有机骨架（Metal Organic Framework,MOFs）是由有机配体与金属离子或金属离子簇通过配位作用自组装而成的一种具有永久孔道性的开放结晶骨架,通常也被称为配位聚合物（PCPS）。因为其较大的比表面积、规整的孔道结构、热稳定性和化学可裁剪性,使其在多个领域具有广阔的应用前景。近年来,随着MOFs在传感领域的发展,许多不同的功能基团被引入到MOFs的孔道中,研制出具有荧光识别性能的MOFs。本论文综述了近几年来基于MOFs的化学传感器在离子识别、PH检测、挥发性有机物和气体检测、爆炸物识别和生物分子检测等关键领域的研究进展,并对MOFs在化学传感器的应用前景进行了展望。     

卟啉金属有机骨架材料的合成及其在催化反应中的应用

金属有机骨架(metal-organic frameworks,MOFs)材料不仅具有非常高的孔隙率和表面积,而且其骨架结构可调控性强,容易实现功能化。功能性MOFs材料是近年发展起来的均相催化剂多相化的有效方法之一。均相催化剂金属卟啉具有很好的催化活性,卟啉构建功能性MOFs材料主要通过两种方式:一种是卟啉作为有机构筑模块制备MOFs材料,另一种是将金属卟啉封装到MOFs内部。卟啉MOFs材料因集合了MOFs的微观结构可调控性和仿酶催化剂金属卟啉的特殊催化活性而引起广泛关注。本文介绍了卟啉MOFs材料的设计合成策略及近年来卟啉MOFs材料在催化领域中的应用,并对其催化应用趋势作了展望,以期对卟啉MOFs材料的设计合成及其催化性能有比较全面的认识。     

固态锂电池中金属锂负极与固体电解质界面的关键挑战

随着新能源汽车的快速发展,车用锂电池的安全性能备受关注。不同于传统锂离子电池采用可燃有机液体电解液,固态锂电池采用无机类固体电解质,具有不可燃、不漏液、高安全、长寿命等一系列优点。此外,固体电解质可兼容高容量金属锂负极,进而实现高能量密度(300 Wh/kg)。然而,由于固体电解质缺乏流动性,其与金属锂负极的界面问题已经成为制约固态锂电池发展的瓶颈。本文简要讨论了金属锂负极与固体电解质界面所存在的几项关键挑战:(1)界面润湿;(2)枝晶生长;(3)金属锂的利用率等问题,并介绍了针对这几项关键问题的近期研究进展。     

中孔金属有机骨架材料的制备与应用

相对于微孔金属有机骨架化合物,中孔金属有机骨架化合物的研究大大拓宽了该类材料的应用,尤其是在多相催化、挥发性有机物吸附和药物输送等领域。目前存在的问题主要集中在材料制备环节,尽管可以从分子水平设计出具有合适尺寸的中孔金属有机骨架材料,但是会出现合成过程中骨架结构发生贯穿无法得到中孔,甚至样品活化过程中骨架发生坍塌失去中孔等问题。本文综述了中孔金属有机骨架材料的设计策略与制备方法,如使用长配体、混合配体、表面活性剂辅助及后合成修饰等方法,并对各种制备方法的优缺点进行了总结。简要介绍了中孔金属有机骨架材料在气体存储、多相催化、分子传感、挥发性有机物吸附和药物载体等领域的应用进展,最后展望了该材料的发展前景。     

金属有机骨架材料在气体分离膜中的应用

金属有机骨架(Metal organic frameworks,MOF)是一种新型材料,有着比表面积高、孔径可调等优点,以此为基础制备MOF膜克服了 MOF材料界面相容性和热稳定性差的缺点,在气体分离领域具有良好的应用前景.本文介绍了 MOF膜的功能层应用、物理共混、界面聚合以及接枝改性;简述了每种方法对不同气体分离性...     

基于表界面反应及优化的锂金属电池研究进展

金属锂具有高理论比容量和低还原电位, 是锂电池阳极的理想材料之一. 但在长期循环充放电过程中, 金属锂因锂枝晶生长会导致出现界面恶化及能量损失严重等问题, 对锂金属电极与电解质表界面反应的优化是一个重要研究方向. 本文介绍了锂枝晶产生的危害, 从分析及抑制锂枝晶沉积两方面综合评述了为解决这一问题所采取的方法, 包括固态电解质界面形成机制和保护机理、 表面改性、 三维锂阳极和液态/固态电解质等方法, 总结了各种方法的优劣势, 并展望锂金属电池在能源领域的研究前景.     

多孔金属有机框架材料作为锂金属负极保护层助力长寿命锂氧气电池

在众多能源储存系统中,锂氧气电池以其高达3500 Wh·kg^-1的理论能量密度有望在性能上超越商用锂离子电池.然而,在电池充放电过程中,金属锂不可控的枝晶生长和严重的腐蚀问题极大地阻碍了锂氧气电池的发展.为了解决以上问题,制备了一种具有高比表面积、丰富孔道结构的金属有机框架材料（MOF-801）,并将其设计成金属锂负极的保护层应用在锂氧气电池中.在本工作中,成功合成了具有高达762.9 m²·g^-1比表面积,边长约为800 nm的立方体状纯净MOF-801材料.并且这种材料表现出对于有机电解液体系（四乙二醇二甲醚1 mol·L^-1三氟甲基磺酸锂）和强还原性的金属锂都具有很好的稳定性.得益于该材料丰富的孔道结构以及高比表面积,锂离子得以更均匀地分布在电极表面促进金属锂均匀沉积,有效避免了由于枝晶刺破隔膜而导致的短路甚至火灾事故.此外,MOF-801保护层本身的阻隔作用和材料捕捉水的特性可以帮助减少污染物质（水、氧气、强氧化性物质等）的穿梭效应带来的副反应,缓解锂氧气电池中金属锂负极的腐蚀情况.因此,将经过保护的金属锂组装成的对称电池进行测试,循环寿命长达800 h,同时充/放电过电势仅为0.023 V（未经保护的电池寿命仅为254 h,最终充/放电过电势高达5 V）,且循环阻抗大大降低,证明了这种策略有效地稳定了金属锂/电解液界面.将经过MOF材料保护的电极实际应用在锂氧气电池中,在限容量1000 mAh·g^-1,限电流500 mA·g^-1条件下,可以实现长达170圈的稳定长寿命的循环（是未经保护的电池寿命的2.88倍）.使用MOF-801保护层的锂氧气电池还表现出了高达8935 mAh·g^-1的高比容量.因此,本工作所报道的保护层策略为未来的碱金属空气电池负极保护领域提供了新颖的视角.     

Eutectic-Based Polymer Electrolyte with the Enhanced Lithium Salt Dissociation for High-Performance Lithium Metal Batteries

The deployment of lithium metal anode in solid-state batteries with polymer electrolytes has been recognized as a promising approach to achieving high-energy-density technologies. However, the practical application of the polymer electrolytes is currently constrained by various challenges, including low ionic conductivity, inadequate electrochemical window, and poor interface stability. To address these issues, a novel eutectic-based polymer electrolyte consisting of succinonitrile (SN) and poly (ethylene glycol) methyl ether acrylate (PEGMEA) is developed. The research results demonstrate that the interactions between SN and PEGMEA promote the dissociation of the lithium difluoro(oxalato) borate (LiDFOB) salt and increase the concentration of free Li⁺. The well-designed eutectic-based PAN_1.2-SPE (PEGMEA: SN=1: 1.2 mass ratio) exhibits high ionic conductivity of 1.30 mS cm⁻¹ at 30 °C and superior interface stability with Li anode. The Li/Li symmetric cell based on PAN_1.2-SPE enables long-term plating/stripping at 0.3 and 0.5 mA cm⁻², and the Li/LiFePO₄ cell achieves superior long-term cycling stability (capacity retention of 80.3 % after 1500 cycles). Moreover, Li/LiFePO₄ and Li/LiNi_0.6Co_0.2Mn_0.2O₂ pouch cells employing PAN_1.2-SPE demonstrate excellent cycling and safety characteristics. This study presents a new pathway for designing high-performance polymer electrolytes and promotes the practical application of high-stable lithium metal batteries.     

Reactive Polymer as Artificial Solid Electrolyte Interface for Stable Lithium Metal Batteries

Lithium (Li) metal anodes have the highest theoretical capacity and lowest electrochemical potential making them ideal for Li metal batteries (LMBs). However, Li dendrite formation on the anode impedes the proper discharge capacity and practical cycle life of LMBs, particularly in carbonate electrolytes. Herein, we developed a reactive alternative polymer named P(St-MaI) containing carboxylic acid and cyclic ether moieties which would in situ form artificial polymeric solid electrolyte interface (SEI) with Li. This SEI can accommodate volume changes and maintain good interfacial contact. The presence of carboxylic acid and cyclic ether pendant groups greatly contribute to the induction of uniform Li ion deposition. In addition, the presence of benzyl rings makes the polymer have a certain mechanical strength and plays a key role in inhibiting the growth of Li dendrites. As a result, the symmetric Li||Li cell with P(St-MaI)@Li layer can stably cycle for over 900 h under 1 mA cm⁻² without polarization voltage increasing, while their Li||LiFePO₄ full batteries maintain high capacity retention of 96 % after 930 cycles at 1C in carbonate electrolytes. The innovative strategy of artificial SEI is broadly applicable in designing new materials to inhibit Li dendrite growth on Li metal anodes.     

锂金属电池中的复合负极

锂金属具有理论比容量高、电位低等优点,被认为是电极中的“圣杯”。然而,锂金属负极在循环过程当中存在着不可控的枝晶生长、体积膨胀等问题,严重地阻碍了锂金属电池的商业化进程。本综述首先概述了锂枝晶的形成机理,然后对由小及大,自内而外,总结了近年来三种不同层次的锂金属电池复合负极:锂金属负极内部结构的复合、锂金属电池内部结构的复合以及锂金属电池内部环境与外界操作条件的复合。最后,本综述对未来多层次锂金属电池复合负极的前景做出了展望。     

Anion-modulated Ion Conductor with Chain Conformational Transformation for stabilizing Interfacial Phase of High-Voltage Lithium Metal Batteries

In solid-state lithium metal batteries (SSLMBs), the inhomogeneous electrolyte-electrode interphase layer aggravates the interfacial stability, leading to discontinuous interfacial ion/charge transport and continuous degradation of the electrolyte. Herein, we constructed an anion-modulated ionic conductor (AMIC) that enables in situ construction of electrolyte/electrode interphases for high-voltage SSLMBs by exploiting conformational transitions under multiple interactions between polymer and lithium salt anions. Anions modulate the decomposition behavior of supramolecular poly (vinylene carbonate) (PVC) at the electrode interface by changing the spatial conformation of the polymer chains, which further enhances ion transport and stabilizes the interfacial morphology. In addition, the AMIC weakens the “Li⁺-solvation” and increases Li⁺ vehicle sites, thereby enhancing the lithium-ion transport number (t_Li⁺=~0.67). Consequently, Li || LiNi_0.8Co_0.1Mn_0.1O₂ cell maintains about 85 % capacity retention and Coulombic efficiency >99.8 % in 200 cycles at a charge cut-off voltage of 4.5 V. This study provides a new understanding of lithium salt anions regulating polymer chain segment behavior in the solid-state polymer electrolyte (SPE) and highlights the importance of the ion environment in the construction of interfacial phases and ionic conduction.     

A Chemically Bonded Ultraconformal Layer between the Elastic Solid Electrolyte and Lithium Anode for High-performance Lithium Metal Batteries

Although high ionic conductivities have been achieved in most solid-state electrolytes used in lithium metal batteries (LMBs), rapid and stable lithium-ion transport between solid-state electrolytes and lithium anodes remains a great challenge due to the high interfacial impedances and infinite volume changes of metallic lithium. In this work, a chemical vapor-phase fluorination approach is developed to establish a lithiophilic surface on rubber-derived electrolytes, which results in the formation of a resilient, ultrathin, and mechanically integral LiF-rich layer after electrochemical cycling. The resulting ultraconformal layer chemically connects the electrolyte and lithium anode and maintains dynamic contact during operation, thus facilitating rapid and stable lithium-ion transport across interfaces, as well as promoting uniform lithium deposition and inhibiting side reactions between electrolyte components and metallic lithium. LMBs containing the novel electrolyte have an ultralong cycling life of 2500 h and deliver a high critical current density of 1.1 mA cm⁻² in lithium symmetric cells as well as showing good stability over 300 cycles in a full cell.     

Asymmetric Solvents Regulated Crystallization-Limited Electrolytes for All-Climate Lithium Metal Batteries

Electrolytes that can keep liquid state are one of the most important physical metrics to ensure the ions transfer with stable operation of rechargeable lithium-based batteries at a wide temperature window. It is generally accepted that strong polar solvents with high melting points favor the safe operation of batteries above room temperatures but are susceptible to crystallization at low temperatures (≤−40 °C). Here, a crystallization limitation strategy was proposed to handle this issue. We demonstrate that, although the high melting points of ethylene sulfite (ES, −17 °C) and fluoroethylene carbonate (FEC, ≈23 °C), their mixtures can avoid crystallization at low temperatures, which can be attributed to low intermolecular interactions and altered molecular motion dynamics. A suitable ES/FEC ratio (10 % FEC) can balance the bulk and interface transport of ions, enabling LiNi_0.8Mn_0.1Co_0.1O₂||lithium (NCM811||Li) full cells to deliver excellent temperature resilience and cycling stability over a wide temperature range from −50 °C to +70 °C. More than 66 % of the capacity retention was achieved at −50 °C compared to room temperature. The NCM811||Li pouch cells exhibit high cycling stability under realistic conditions (electrolyte weight to cathode capacity ratio (E/C)≤3.5 g Ah⁻¹, negative to positive electrode capacity ratio (N/P)≤1.09) at different temperatures.     

Simultaneous Stabilization of Lithium Anode and Cathode using Hyperconjugative Electrolytes for High-voltage Lithium Metal Batteries

Although great progress has been made in new electrolytes for lithium metal batteries (LMBs), the intrinsic relationship between electrolyte composition and cell performance remains unclear due to the lack of valid quantization method. Here, we proposed the concept of negative center of electrostatic potential (NCESP) and Mayer bond order (MBO) to describe solvent capability, which highly relate to solvation structure and oxidation potential, respectively. Based on established principles, the selected electrolyte with 1.7 M LiFSI in methoxytrimethylsilane (MOTMS)/ (trifluoromethyl)trimethylsilane (TFMTMS) shows unique hyperconjugation nature to stabilize both Li anode and high-voltage cathode. The 4.6 V 30 μm Li||4.5 mAh cm⁻² lithium cobalt oxide (LCO) (low N/P ratio of 1.3) cell with our electrolyte shows stable cycling with 91 % capacity retention over 200 cycles. The bottom-up design concept of electrolyte opens up a general strategy for advancing high-voltage LMBs.