Theoretical Study on the Structure and Stability of Si5X （X = Li, Be, B, C, N, O, F, Na, Mg, Al, Si, P, S, Cl） Clusters

1 INTRODUCTION In the later 60s of last century, silicon substituted for germanium to present as mainstream in semicon- ductor. The semi-conductive devices made by silicon have many advantages, for example, refractory pro- perty, high radioresistance, simple and stable process- ing technic, high machinability and low cost. So it was widely used to manufacture large power appara- tuses, for instance, digit and linear integrated circuit, large scale integrated circuit (LSI), etc. Thus, th…     

SYNTHESIS AND CRYSTAL STRUCTURE OF 5, 10, 15, 20, 22, 24-HEXAHYDRO-5, 5, 10, 10, 15, 15, 20, 20-OCTAMETHYL-PORPHINE

<正> The title com pound (HHOMP) has been synthesized with the pho-toinduced condensation of acetone and pyrrole in the presence of iodoaromatic hydrocarbons, and its molecular and crystal structures have been determined by X-ray analysis. C28H36N4, Mr = 428. 63, triclinic; space group P1; a =10. 165(3), b = 10. 185(2), c=13. 012(3)(?); α=85. 41(2), β=67. 84(2), γ= 89. 75(2)°; V = 1243 (?)3; Z = 2; D = 1. 145g. cm-3; μ= 0. 635cm-1; F (000) = 464. Although the HHOMP molecule twists, it is found that the four nitrogen atoms are still in a plane.     

ICP—AES法测定钢铁样中硅,磷,锰,铬,镍,铜,铝

详细地研究了钢铁样中主量铁对７种被测定元素的干扰和被测定元素间的干扰情况，并研究了不同酸分解样品的效果，确定了用电感耦合等离子体发射光谱测定钢铁样中硅、磷、锰、铬、镍、铜和铝的方法。     

Sn(Ⅱ)-X和Sn(Ⅳ)-X (X=O,S,N,C,P,As,Se,Te,F,Cl,Br,I)键价参数

基于剑桥晶体数据库中同配配合物的Sn(Ⅱ)-X和Sn(Ⅳ)-X (X=O,S,N,C,P,As,Se,Te,F,Cl,Br,I)键长数据,采用键价参数B=0.037 nm拟合得到Sn(Ⅱ)-X和Sn(Ⅳ)-X的键价参数R0,这样拟合的经验参数R0中有一些是首次推出.本文所报道的Sn(Ⅱ)-O键基于B=0.037 nm的R0值(0.1956 nm)可适用于多数Sn(Ⅱ)呈各种配位数时的氧化态指定,而文献报道的B=0.055 nm和R0=0.1859 nm主要对于低配位的情况能取得Sn(Ⅱ)原子价态指定的较好结果.本研究证明,进一步研究键价参数对键价和(BVS)计算至关重要的那些可能的因素实乃当务之急.     

马一嘉,罗冰虹,谭凯馨

硫在作物生长过程中必不可少的营养元素之一,主要参与作物生理代谢及生长发育。因此,土壤中硫的含量一直是人们关注的热点,快速准确的检测方法也成为人们研究土壤中硫的关键。在高温燃烧碘量法测定土壤硫含量中,碘酸钾溶液滴定亚硫酸时,对于低含量样品,滴定终点的判断较为困难。通过大量的试验,采用硫代硫酸钠滴定吸收器中反应后剩余的碘酸钾溶液,滴定终点由蓝色消失为无色。终点便于肉眼的观察,提高了分析结果的准确性和再现性;采用EXCEL中的LINEST函数回归标准物质滴定校准工作曲线,方法简便快速。通过国家一级标准物质的分析验证,方法准确度高、精密度好,适用于大批量土壤样品中低含量硫的测定。     

王玉功,倪能 ,杨发旺

采用电感耦合等离子体发射光谱法(ICP-AES)测定地表水和地下水中的全S、P、B来近似代替水中的SO42-、PO43-、H3BO3。结果表明,ICP-AES可同时测定地表水和地下水的SO42-、PO43-、H3BO3,方法检出限分别为0.0265mg/L、0.0320mg/L、0.0192mg/L。方法的精密度(RSD,n=6)为0.53﹪～6.09﹪,加标回收率为91.9﹪～102.2﹪,经与单个项目分别测定的方法比对实验,测定值无明显系统偏差。方法快速、准确,经国家标准物质验证,结果与标准值相符。     

Sn(II)―X和Sn(IV)―X (X=O,S, N,C, P,As, Se,Te, F,Cl, Br,I)键价参数

基于剑桥晶体数据库中同配配合物的Sn(Ⅱ)―X和Sn(Ⅳ)―X(X=O,S,N,C,P,As,Se,Te,F,Cl,Br,I)键长数据,采用键价参数B=0.037nm拟合得到Sn(Ⅱ)―X和Sn(Ⅳ)―X的键价参数R0,这样拟合的经验参数R0中有一些是首次推出.本文所报道的Sn(Ⅱ)―O键基于B=0.037nm的R0值(0.1956nm)可适用于多数Sn(Ⅱ)呈各种配位数时的氧化态指定,而文献报道的B=0.055nm和R0=0.1859nm主要对于低配位的情况能取得Sn(Ⅱ)原子价态指定的较好结果.本研究证明,进一步研究键价参数对键价和(BVS)计算至关重要的那些可能的因素实乃当务之急.     

在小硅化物SiX^m4（X=H,He,Li,Be,O,F,Ne,Na,Mg,S,Cl,Ar;m=0,…

用从头算方法，在ＨＦ／ＳＴＯ－３Ｇ、ＨＦ／３－２１Ｇ和ＨＦ／６－３１Ｇ水平上研究了小硅化物ＳｉＸ＾ｍ４的成键倾向性。计算结果表明，所研究的分子势能曲线均有稳定的极小值（ＳｉＬｉ４除外）。与已知的稳定分子ＳｉＨ１、ＳｉＦ４和ＳｉＣｌ４比较，含惰性元素的未知分子ＳｉＨｅ＾４＋４、ＳｉＮｅ＾４＋４和ＳｉＡｒ＾４＋４比含碱金属和碱土金属的未知分子ＳｉＬＩ４、ＳｉＮａ４、ＳｉＢｅ＾４＋４和ＳｉＭｇ＾４＋４有     

理论计算研究二维/二维BP/g-C3N4异质结的光催化CO2还原性能

Photocatalytic reduction of CO₂ to hydrocarbon compounds is a promising method for addressing energy shortages and environmental pollution. Considerable efforts have been devoted to exploring valid strategies to enhance photocatalytic efficiency. Among various modification methods, the hybridization of different photocatalysts is effective for addressing the shortcomings of a single photocatalyst and enhancing its CO₂ reduction performance. In addition, metal-free materials such as g-C₃N₄ and black phosphorus (BP) are attractive because of their unique structures and electronic properties. Many experimental results have verified the superior photocatalytic activity of a BP/g-C₃N₄ composite. However, theoretical understanding of the intrinsic mechanism of the activity enhancement is still lacking. Herein, the geometric structures, optical absorption, electronic properties, and CO₂ reduction reaction processes of 2D/2D BP/g-C₃N₄ composite models are investigated using density functional theory calculations. The composite model consists of a monolayer of BP and a tri-s-triazine-based monolayer of g-C₃N₄. Based on the calculated work function, it is inferred that electrons transfer from g-C₃N₄ to BP owing to the higher Fermi level of g-C₃N₄ compared with that of BP. Furthermore, the charge density difference suggests the formation of a built-in electric field at the interface, which is conducive to the separation of photogenerated electron-hole pairs. The optical absorption coefficient demonstrates that the light absorption of the composite is significantly higher than that of its single-component counterpart. Integrated analysis of the band edge potential and interfacial electronic interaction indicates that the migration of photogenerated charge carriers in the BP/g-C₃N₄ hybrid follows the S-scheme photocatalytic mechanism. Under visible-light irradiation, the photogenerated electrons on BP recombine with the photogenerated holes on g-C₃N₄, leaving photogenerated electrons and holes in the conduction band of g-C₃N₄ and the valence band of BP, respectively. Compared with pristine g-C₃N₄, this S-scheme heterojunction allows efficient separation of photogenerated charge carriers while effectively preserving strong redox abilities. Additionally, the possible reaction path for CO₂ reduction on g-C₃N₄ and BP/g-C₃N₄ is discussed by computing the free energy of each step. It was found that CO₂ reduction on the composite occurs most readily on the g-C₃N₄ side. The reaction path on the composite is different from that on g-C₃N₄. The heterojunction reduces the maximum energy barrier for CO₂ reduction from 1.48 to 1.22 eV, following the optimal reaction path. Consequently, the BP/g-C₃N₄ heterojunction is theoretically proven to be an excellent CO₂ reduction photocatalyst. This work is helpful for understanding the effect of BP modification on the photocatalytic activity of g-C₃N₄. It also provides a theoretical basis for the design of other high-performance CO₂ reduction photocatalysts.      

石墨相氮化碳负载磷钨酸杂化材料的制备及其氧化脱硫催化性能

以1-丁基-3-甲基咪唑溴离子液体([Bmim]Br)、磷钨酸(H_3PW_(12)O_(40))和g-C_3N_4为原料,采用原位沉淀法合成了负载型[Bmim]_3PW_(12)O_(40)/g-C_3N_4催化剂(BPWO/g-C_3N_4)。通过XRD、FT-IR、UV-vis、氮气吸附、TEM和XPS等手段对催化剂的形貌和结构进行了表征,并以二苯并噻吩(DBT)的正庚烷溶液为模拟油、过氧化氢为氧化剂,考察了各组分负载量、催化剂用量、氧/硫物质的量比(O/S)和反应温度变量等对其氧化脱硫效果的影响。结果表明,BPWO/g-C_3N_4具有Keggin型杂多阴离子结构特征,BPWO (20%)/g-C_3N_4催化剂具有最优的对DBT的氧化脱硫性能,在50℃、O/S物质的量比为6.0的条件下反应180 min,可以完全氧化浓度为800μg/g的含DBT模拟油。同时,该BPWO/g-C_3N_4催化剂具有良好的重复使用性能,循环使用八次后其对DBT的氧化活性没有明显降低。     

Ni,Co基硒化物修饰g-C3N4光催化产氢研究

Developing novel and efficient catalysts is a significant way to break the bottleneck of low separation and transfer efficiency of charge carriers in pristine photocatalysts. Here, two fresh photocatalysts, g-C₃N₄@Ni₃Se₄ and g-C₃N₄@CoSe₂ hybrids, are first synthesized by anchoring Ni₃Se₄ and CoSe₂ nanoparticles on the surface of well-dispersed g-C₃N₄ nanosheets. The resulting materials show excellent performance for photocatalytic in situ hydrogen generation. Pristine g-C₃N₄ has poor photocatalytic hydrogen evolution activity (about 1.9 μmol·h^-1) because of the rapid recombination of electron-hole pairs. However, the hydrogen generation activity is well improved after growing Ni₃Se₄ and CoSe₂ on the surface of g-C₃N₄, owing to the unique effect of these selenides in accelerating the separation and migration of charge carriers. The hydrogen production activities of G-C₃N₄@Ni₃Se₄ and g-C₃N₄@CoSe₂ are about 16.4 μmol·h^-1 and 25.6 μmol·h^-1, which are 8-fold and 13-fold that of pristine g-C₃N₄, respectively. In detail, coupling Ni₃Se₄ and CoSe₂ with g-C₃N₄ greatly improves the light absorbance density and extends the light response region. The photoluminescence intensity of the photoexcited Eosin Y dye in the presence of g-C₃N₄@Ni₃Se₄ and g-C₃N₄@CoSe₂ is weaker than that in the presence of pure g-C₃N₄. On the other hand, the upper limit of the electron-transfer rate constants in the presence of g-C₃N₄@Ni₃Se₄ and g-C₃N₄@CoSe₂ is greater than that in the presence of pure g-C₃N₄. Among the g-C₃N₄@Ni₃Se₄@FTO, g-C₃N₄@CoSe₂@FTO, and g-C₃N₄@FTO electrodes, the g-C₃N₄@FTO electrode has the lowest photocurrent density and the highest electrochemical impedance, implying that the introduction of CoSe₂ and Ni₃Se₄ onto the surface of g-C₃N₄ enhances the separation and transfer efficiency of photogenerated charge carriers. In other words, the formation of two star metals selenide based on g-C₃N₄ can efficiently inhibit the recombination of photogenerated charge carriers and accelerate photocatalytic water splitting to generate H₂. Meanwhile, the right shift of the absorption band edge effectively reduces the transition threshold of the photoexcited electrons from the valence band to the conduction band. In addition, the more negative zeta potential for the g-C₃N₄@Ni₃Se₄ and g-C₃N₄@CoSe₂ catalysts as compared with that for pure g-C₃N₄ leads to a notable enhancement in the adsorption of protons by the sample surface. Moreover, the results of density functional theory calculations indicate that the hydrogen adsorption energy of the N sites in g-C₃N₄ is -0.22 eV; further, the hydrogen atoms are preferentially adsorbed at the bridge site of two selenium atoms to form a Se―H―Se bond, and the adsorption energy is 1.53 eV. In-depth characterization has been carried out by transmission electron microscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, X-ray diffraction, ultraviolet-visible diffuse reflectance spectroscopy, transient photocurrent measurements, and Fourier transform infrared spectroscopy; the results of these experiments are in good agreement with one another.     

碱催化剂g-C3N4在液相反应中溶胀特性的研究

Graphitic carbon nitrides (g-C₃N₄) with different surface areas were prepared by pyrolysis using different precursors including melamine, dicyandiamide, thiourea and urea, and subsequently characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectra (FTIR), X-ray photoelectron spectroscopy (XPS), thermal gravimetric analysis (TGA) and N2 adsorption. Their basicities were measured by temperature-programmed desorption of CO₂ (CO₂-TPD) and acid-base titration. The catalytic properties for the Knoevenagel condensation of benzaldehyde and malononitrile were investigated in various solvents. In non-polar toluene solution, the benzaldehyde conversions of the g-C₃N₄ catalysts were low and changed according to their respective surface areas and basicities. However, in polar ethanol solution, the benzaldehyde conversions of all catalysts were similar, and much higher than those in toluene. This could not be explained by the results obtained from either of the two conventional basicity measurements. Further experimental results proved that g-C₃N₄ catalysts swelled in polar solutions, and more basic sites were exposed on the surface of the swollen catalysts, leading to the imminent increase in catalytic activity. This was proved by the catalyst poisoning data, which showed that the g-C₃N₄ catalyst lost its activity completely in toluene by adding 40.9 mmol·g^-1 benzoic acid, while the same catalyst was still active in ethanol until the added amount exceeded 143.3 m·g^-1. Additionally, the reaction tests in various solutions showed that the swelling effect was enhanced according to the polarity of the solvent used. A similar conclusion could be reached for the Knoevenagel condensation of furfural and malononitrile in various solvents. The reusability of g-C₃N₄ catalyst in Knoevenagel condensation was also studied, which showed that g-C₃N₄ was stable in liquid-phase reactions, whose activity dropped from 74.2% to 63.8% after three regeneration processes.     

Z型可见光催化剂Au NPs/g-C3N4/BiOBr的构建及其光催化性能

通过水热和原位还原法制备了一种新型Z型异质结三元复合材料Au NPs/g-C₃N₄/BiOBr,并通过X射线衍射、X射线光电子能谱、透射电子显微镜、紫外-可见漫反射光谱和光致发光发射光谱等技术对材料的形貌、结构进行了表征。通过在可见光下降解苯酚来评价光催化剂的活性。研究发现,Au NPs/g-C₃N₄/BiOBr显示出增强的光催化活性,对苯酚的降解能力是g-C₃N₄的3倍,是BiOBr的2.5倍。这可归因于三元复合材料的窄带隙（2.10eV）、Z型机理对光生电子-空穴对的有效分离和Au纳米颗粒的表面等离子体共振效应（SPR）。     

多组分纳米纤维体系中载流子动力学的有效级联调制及其高效光催化产氢性能研究（英文）

利用半导体作为催化剂,将水光催化还原为H₂,为缓解全球能源危机以及环境污染问题提供了一种经济环保的途径。优化调控载流子动力学行为对提高半导体光催化分解水还原为绿色燃料-H₂的活性具有十分重要的意义。目前,基于半导体异质结效应或局域表面等离激元共振的敏化过程来设计和调控半导体基异质结构体系已成为调控载流子动力学行为的一种经典策略。然而,通过精细设计异质结构,合理耦合上述敏化过程,实现载流子动力学的级联调制,从而获得高效的光催化产H₂活性仍然任重道远。在本文中,我们通过原位氧化(g-C₃N₄的剥离和Ag₂S)和还原(Ag)反应,将等离激元Ag纳米颗粒(NPs)和两种不同的半导体Ag₂SNPs和g-C₃N₄纳米片(NSs)组装在电纺TiO₂纳米纤维(NFs)中,形成了一种新型四元异质组分纳米纤维(HNFs)体系。结合时间分辨光致发光光谱,3D时域有限差分模拟以及对照实验,我们...     

非金属掺杂石墨相氮化碳光催化的研究进展与展望

Since Fujishima and Honda demonstrated the photoelectrochemical water splitting on TiO₂ photoanode and Pt counter electrode, photocatalysis has been considered as one of the most promising technologies for solving both the problems of environmental pollution and energy shortage. This process can effectively use solar energy, the most abundant energy resource on the earth, to drive various catalytic reactions, such as water splitting, CO₂ reduction, organic pollutant degradation, and organic synthesis, for energy generation and environmental purification. Except for the various metal-based semiconductors, such as metal oxides, metal sulfides, and metal oxynitrides, developed for photocatalysis, graphitic carbon nitride (g-C₃N₄) has attracted significant attention in the recent years because of its earth abundancy, non-toxicity, good stability, and relatively narrow band gap (2.7 eV) for visible light response. However, g-C₃N₄ suffers from insufficient absorption of visible light in the solar spectrum and rapid recombination of photogenerated electrons and holes, thus resulting in low photocatalytic activity. Until now, various strategies have been developed to enhance the photocatalytic activity of g-C₃N₄, including element doping, nanostructure and heterostructure design, and co-catalyst decoration. Among these methods, element doping has been found to be very effective for adjusting the unique electronic and molecular structures of g-C₃N₄, which could significantly expand the range of photoresponse under visible light and improve the charge separation. Especially, non-metal doping has been well investigated frequently to improve the photocatalytic activity of g-C₃N₄. The non-metal dopants commonly used for the doping of g-C₃N₄ include oxygen (O), phosphorus (P), sulfur (S), boron (B), and halogen (F, Cl, Br, I) and also carbon (C) and nitrogen (N) (for self-doping), as they are easily accessible and can be introduced into the g-C₃N₄ framework through different physical and chemical synthetic methods. In this review article, the structural and optical properties of g-C₃N₄ is introduced first, followed by a brief introduction to the modification of g-C₃N₄ as photocatalysts. Then, the progress in the non-metal doped g-C₃N₄ with improved photocatalytic activity is reviewed in detail, with the photocatalytic mechanisms presented for easy understanding of the fundamentals of photocatalysis and for guiding in the design of novel g-C₃N₄ photocatalysts. Finally, the prospects of the modification of g-C₃N₄ for further advances in photocatalysis is presented.     

Surface molecular imprinting on g-C3N4 photooxidative nanozyme for improved colorimetric biosensing

Molecular imprinting on g-C₃N₄ leads to an over 1000-fold alleviation in matrix-interference from serum samples.     

三元金属硫化物-石墨相氮化碳异质结催化剂的制备及光催化性能

以双氰胺、醋酸锌、钼酸铵、醋酸镉和硫化钠为原料,采用水热法合成了一系列Zn-Mo共掺杂CdS(Zn-Mo-CdS),并与g-C₃N₄组成异质结催化剂(Zn-Mo-CdS/g-C₃N₄)。采用X射线衍射光谱(XRD)、紫外-可见(UV-Vis)光谱、电感耦合等离子体-原子发射光谱(ICP-AES)、电化学阻抗谱(EIS)、X光电子能谱(XPS)等分析手段对制备的催化剂进行了表征。结果表明, Zn-Mo-CdS与g-C₃N₄之间紧密结合并形成异质结,促进界面电荷迁移,抑制光生电子-空穴对的复合。以可见光下降解染料罗丹明B (RhB)为探针反应考察了催化剂性能。结果表明, Zn-Mo-CdS/g-C₃N₄异质结催化剂的光催化性能与单纯g-C₃N₄、Zn-Mo-CdS及双金属硫化物/g-C₃N₄异质结催化剂相比均有大幅度提高,质量比m(Zn-Mo-CdS)/m(g-C₃N₄) = 4 : 1时制备的异质结催化剂表现出最大的降解速率常数,是单纯g-C₃N₄和Zn-Mo-CdS的30倍和10倍。不仅Zn-Mo-CdS,其他三元金属复合硫化物如Mo-Ni-CdS和Ni-Sn-CdS与g-C₃N₄之间也能有效构筑异质结,促进电子-空穴对的分离和催化性能提升。     

g-C3N4/BiVO4复合催化剂的制备及应用于光催化还原CO2的性能

用简单的超声分散法合成了具有可见光响应的类石墨氮化碳(g-C₃N₄)/BiVO₄复合光催化剂. 采用X射线衍射(XRD), X射线光电子能谱(XPS), 扫描电子显微镜(SEM), 透射电子显微镜(TEM), 紫外-可见(UV-Vis)分光光谱, 傅里叶红外变换(FTIR)光谱, 荧光发射谱(PL)和光电流响应等技术对所制备催化剂进行相关表征. 通过可见光下(λ> 420 nm)光催化还原CO₂的性能来评价样品的光催化活性, 发现不同复合比的催化剂中, 含40% (w) g-C₃N₄的复合催化剂表现出最高的光催化活性, 其催化活性分别为纯g-C₃N₄纳米片和纯BiVO₄的催化活性的2倍和4倍.光催化活性增加的主要原因是g-C₃N₄和BiVO₄之间形成了异质结, 且相互间能级匹配, 有利于光生电子和空穴的分离.