等浓度的氯化铵和硫酸铵溶液哪个pH高

有中学化学参考资料题:0.10 mol/L的NH4Cl和(NH4)2SO4溶液哪个pH值高?这似乎是个中学生可做的简单题目,仔细考虑不是如此.如果简单地认为盐酸和硫酸都是强酸,而硫酸是二元酸,硫酸铵溶液中铵盐浓度为0.20 mol/L,那么NH4Cl溶液pH高,那是不妥的.硫酸是二元酸,第一个氢离子能完全电离,第二个氢离子部分电离,如此考虑情况怎么样呢?是不是答案发生变化?这要通过计算来说明.     

Enhanced efficiency and stability in Sn-based perovskite solar cells with secondary crystallization growth

The conversion efficiencies reported for Tin(Sn)halide-based perovskite solar cells(PSCs)fall a large gap behind those of lead halide-based PSCs,mainly because of poor film quality of the former.Here we report an efficient strategy based on a simple secondary crystallization growth(SCG)technique to improve film quality for tin halide-based PSCs by applying a series of functional amine chlorides on the perovskite surface.They were discovered to enhance the film crystallinity and suppress the oxidation of Sn²⁺remarkably,hence reduce trap state density and non-irradiative recombination in the absorber films.Furthermore,the SCG film holds the band levels matching better with carrier transport layers and herein favoring charge extraction at the device interfaces.Consequently,a champion device efficiency of 8.07% was achieved alo ng with significant enhancements in VOC and JSC,in contrast to 5.35% of the control device value.Moreover,the SCG film-based devices also exhibit superior stability comparing with the control one.This work explicitly paves a novel and general strategy for developing high performance lead-free PSCs.     

Energy level engineering of charge selective contact and halide perovskite by modulating band offset:Mechanistic insights

Mixed cation and anion based perovskites solar cells exhibited enhanced stability under outdoor conditions,however,it yielded limited power conversion efficiency when TiO₂ and Spiro-OMeTAD were employed as electron and hole transport layer(ETL/HTL)respectively.The inevitable interfacial recombination of charge carriers at ETL/perovskite and perovskite/HTL interface diminished the efficiency in planar(n-i-p)perovskite solar cells.By employing computational approach for uni-dimensional device simulator,the effect of band offset on charge recombination at both interfaces was investigated.We noted that it acquired cliff structure when the conduction band minimum of the ETL was lower than that of the perovskite,and thus maximized interfacial recombination.However,if the conduction band minimum of ETL is higher than perovskite,a spike structure is formed,which improve the performance of solar cell.An optimum value of conduction band offset allows to reach performance of 25.21%,with an open circuit voltage(VOC)of 1231 mV,a current density JSC of 24.57 mA/cm² and a fill factor of 83.28%.Additionally,we found that beyond the optimum offset value,large spike structure could decrease the performance.With an optimized energy level of Spiro-OMeTAD and the thickness of mixed-perovskite layer performance of 26.56% can be attained.Our results demonstrate a detailed understanding about the energy level tuning between the charge selective layers and perovskite and how the improvement in PV performance can be achieved by adjusting the energy level offset.     

A new strategy to access Co/N co-doped carbon nanotubes as oxygen reduction reaction catalysts

Carbon nanotubes(CNTs),as one-dimensional nanomaterials,show great potential in energy conversion and storage due to their efficient electrical conductivity and mass transfer.However,the security risks,time-consuming and high cost of the preparation process hinder its further application.Here,we develop that a negative pressure rather than a following gas environment can promote the generation of cobalt and nitrogen co-doped CNTs(Co/N-CNTs) by using cobalt zeolitic imidazolate framework(ZIF-67) as a precursor,in which the negative pressure plays a key role in adjusting the size of cobalt nanoparticles and stimulating the rearragement of carbon atoms for forming CNTs.Importantly,the obtained Co/N-CNTs,with high content of pyridinic nitrogen and abundant graphitized structure,exhibit superior catalytic activity for oxygen reduction reaction(ORR) with half-wave potential(E_1/2) of 0.85 V and durability in terms of the minimum current loss(2%) after the 30,000 s test.Our development provides a new pathway for large-scale and cost-effective preparation of metal-doped CNTs for various applications.     

Recent Advances of Pure Organic Room Temperature Phosphorescence Materials for Bioimaging Applications

Bioimaging,as a powerful and helpful tool,which allows people to investigate deeply within living organisms,has contributed a lot for both clinical theranostics and scientific research.Pure organic room temperature phosphorescence(RTP)materials with the unique features of ultralong luminescence lifetime and large Stokes shift,can efficiently avoid biological autofluorescence and scattered light through a time-resolved imaging modality,and thus are attracting increasing attention.This review classifies pure organic RTP materials into three categories,including small molecule RTP materials,polymer RTP materials and supramolecular RTP materials,and summarizes the recent advances of pure organic RTP materials for bioimaging applications.     

Stabilizing High-voltage Cathode Materials for Next-generation Li-ion Batteries

The pressing demand for high-energy/power lithium-ion batteries requires the deployment of cathode materials with higher capacity and output voltage.Despite more than ten years of research,high-voltage cathode mate-rials,such as high-voltage layered oxides,spinel LiNi0.5Mn1.5O4,and high-voltage polyanionic compounds still cannot be commercially viable due to the instabilities of standard electrolytes,cathode materials,and cathode electrolyte interphases under high-voltage operation.This paper summarizes the recent advances in addressing the surface and interface issues haunting the application of high-voltage cathode materials.The understanding of the limitations and advantages of different modification protocols will direct the future endeavours on advancing high-energy/power lithium-ion batteries.     

Conformational Properties of Comb-shaped Polyelectrolytes with Negatively Charged Backbone and Neutral Side Chains Studied by a Generic Coarse-grained Bead-and-Spring Model

A generic coarse-grained bead-and-spring model,mapped onto comb-shaped polycarboxylate-based(PCE)superplasticizers,is developed and studied by Langevin molecular dynamics simulations with implicit solvent and explicit counterions.The agreement on the radius of gyration of the PCEs with experiments shows that our model can be useful in studying the equilibrium sizes of PCEs in solution.The effects of ionic strength,side-chain number,and side-chain length on the conformational behavior of PCEs in solution are explored.Single-chain equilibrium properties,including the radius of gyration,end-to-end distance and persistenee length of the polymer backbone,shape-asphericity parameter,and the mean span dimension,are determined.It is found that with the increase of ionic strength,the equilibrium sizes of the polymers decrease only slightly,and a linear dependenew of the persistence length of backbone on the Debye screening length is found,in good agreement with the theory developed by Dobrynin.Increasing side-chain numbers and/or side-chain lengths increases not only the equilibrium sizes(radius of gyration and mean span)of the polymer as a whole,but also the persistence length of the backbone due to excluded volume interactions.     

Suppressing trap states and energy loss by optimizing vertical phase distribution through ternary strategy in organic solar cells

Suppressing the trap-state density and the energy loss via ternary strategy was demonstrated.Favorable vertical phase distribution with donors(acceptors)accumulated(depleted)at the interface of active layer and charge extraction layer can be obtained by introducing appropriate amount of polymer acceptor N2200 into the systems of PBDB-T:IT-M and PBDB-TF:Y6.In addition,N2200 is gradiently distributed in the vertical direction in the ternary blend film.Various measurements were carried out to study the effects of N2200 on the binary systems.It was found that the optimized morphology especially in vertical direction can significantly decrease the trap state density of the binary blend films,which is beneficial for the charge transport and collection.All these features enable an obvious decrease in charge recombination in both PBDB-T:IT-M and PBDB-TF:Y6 based organic solar cells(OSCs),and power conversion efficiencies(PCEs)of 12.5%and 16.42%were obtained for the ternary OSCs,respectively.This work indicates that it is an effective method to suppress the trap state density and thus improve the device performance through ternary strategy.     

Three-dimensionalization via control of laser-structuring parameters for high energy and high power lithium-ion battery under various operating conditions

Laser-structuring is an effective method to promote ion diffusion and improve the performance of lithium-ion battery(LIB)electrodes.In this work,the effects of laser structuring parameters(groove pitch and depth)on the fundamental characteristics of LIB electrode,such as interfacial area,internal resistances,material loss and electrochemical performance,are investigated,LiNi_0.5Co_0.2Mn_0.3O₂ cathodes were structured by a femtosecond laser by varying groove depth and pitch,which resulted in a material loss of 5%-14%and an increase of 140%-260%in the in terfacial area between electrode surface and electrolyte.It is shown that the importance of groove depth and pitch on the electrochemical performance(specific capacity and areal discharge capacity)of laser-structured electrode varies with current rates.Groove pitch is more im porta nt at low current rate but groove depth is at high curre nt rate.From the mapping of lithium concentration within the electrodes of varying groove depth and pitch by laser-induced breakdown spectroscopy,it is verified that the groove functions as a diffusion path for lithium ions.The ionic,electronic,and charge transfer resistances measured with symmetric and half cells showed that these internal resistances are differently affected by laser structuring parameters and the changes in porosity,ionic diffusion and electronic pathways.It is demonstrated that the laser structuring parameters for maximum electrode performance and minimum capacity loss should be determined in consideration of the main operating conditions of LIBs.     

Mesh-like vertical structures enable both high areal capacity and excellent rate capability

In order to balance electrochemical kinetics with loading level for achieving efficient energy storage with high areal capacity and good rate capability simultaneously for wearable electronics,herein,2 D meshlike vertical structures(NiCo_2 S_4@Ni(OH)_2) with a high mass loading of 2.17 mg cm^-2 and combined merits of both 1 D nanowires and 2 D nanosheets are designed for fabricating flexible hybrid supercapacitors.Particularly,the seamlessly interconnected NiCo_2 S_4 core not only provides high capacity of 287.5 μAh cm^-2 but also functions as conductive skeleton for fast electron transport;Ni(OH)_2 sheath occupying the voids in NiCo_2 S_4 meshes contributes extra capacity of 248.4 μAh cm^-2;the holey features guarantee rapid ion diffusion along and across NiCO_2 S_4@Ni(OH)_2 meshes.The resultant flexible electrode exhibits a high areal capacity of 535.9 μAh cm^-2(246.9 mAh g^-1) at 3 mA cm^-2 and outstanding rate performance with 84.7% retention at 30 mA cm^-2,suggesting efficient utilization of both NiCo_2 S_4 and Ni(OH)_2 with specific capacities approaching to their theoretical values.The flexible solid-state hybrid device based on NiCo_2 S_4@Ni(OH)_2 cathode and Fe_2 O_3 anode delivers a high energy density of 315 μWh cm^-2 at the power density of 2.14 mW cm^-2 with excellent electrochemical cycling stability.     

线上线下混合式物理化学实验研究型教学改革

针对目前实验教学在创新型人才培养中存在的问题,介绍了北京航空航天大学化学学院物理化学实验教学的改革与实践情况。结合线上教学灵活、不受时空限制,以及线下教学培养学生动手操作能力和严谨求实的科学素养的特点,从递进式教学内容设计、个性化实验操作指导和训练、科研式论文报告总结、针对性展示和专题分析等方面进行了线上线下混合式研究型教学改革。将理论方法、虚拟操作、实际训练和总结提升等相结合,充分发挥教师指导和学生主体的优势,多维度培养和提升学生的科学素养、创新思维和综合创新能力,为提升实验教学质量和促进创新型人才培养提供了有益的借鉴。     

基于微课的翻转课堂教学模式在分析化学实验教学中的探索

分析化学实验是大学化学实验的重要内容,是分析化学课程学习中不可缺少的组成部分。为了提高分析化学实验教学质量,提升学生动手能力、分析问题和解决问题的能力以及创新能力,解决传统教学模式存在的主要问题,对分析化学实验教学模式进行了改革探索。将以微课为基础的翻转课堂教学模式引入到分析化学实验中,激发学生的实验热情,提高学生综合实验技能,巩固基础理论知识,培养了科学研究思维,真正实现创新性人才培养目标。     

有机化学实验教学中学生科学探究能力的培养

The ability of scientific inquiry is one of the important abilities of undergraduate students. We have been thinking and exploring to cultivate students' scientific research ability in the course of laboratory teaching. In recent years, we had carried out persistently reform and practice to the laboratory teaching content and the teaching method in organic chemistry, for example, introduction to the frontier of scientific research, exploring the abnormal phenomena of the experiment, organization of experiment discussion, and carrying out the extracurricular research experiments. The above measures can greatly stimulate the students' interest in learning. Their abilities to think, observe, analyze and solve problems were fully developed. The students' ability of scientific inquiry had been cultivated in multiple aspects. The above measures have effectively promoted the improvement of teaching quality of organic chemistry laboratory course, and also supported the training objectives of high-quality innovative talents in chemistry.     

非化学专业有机化学实验教学中对学生科研思维的培养

研究型大学对学生科研思维的培养至关重要,有机化学实验作为近化学专业类学生重要的基础实验课程,对学生操作技能、创新能力和科研思维培养有重要作用。本文以非化学专业本科生有机化学实验"大学化学实验(O)"的教学实践为例,从学生学习方式、教师教学方法、实验教学内容设置等方面阐述如何在教学过程中完成对学生科研思维的培养。     

应用型本科院校开展学生科研训练的探索与研究*

大学生创新实践能力的培养是当前高校教育的重要命题,作为一所应用型本科院校,吕梁学院积极探索学生培养新模式,率先在化学化工系开展了人才培养方案改革、扩大实验室开放、“科研小助手”的选拔与培养等工作,项目的实施带动了多方面的变化并产出了一批科研与竞赛成果,为在全校范围全面开展学生科研训练提供了宝贵经验。     

注重基础促进交叉尊重选择培育英才 ——北京大学化学学科"拔尖计划"十年

北京大学化学与分子工程学院在实施基础学科拔尖学生培养计划过程中,实行动态管理制度,低年级统一培养,高年级通过制定个性化教学方案和参加科研训练的办法遴选拔尖学生,探索"扎根课堂打好基础,依托科研提高能力,着眼交流开阔眼界"的培养模式,实现"以高水平科研带动创新人才培养"的目标。在基础核心课程中设置平行的英文班和阅读讨论班以适应不同学生的需求。2016年,随着北京大学综合改革计划的推进,进一步明确了"一体化、多层次、开放式、重基础、求创新"的教学指导思想,在注重化学基础理论知识和基本实验方法培养、注重数学和物理基础知识学习的基础上,构建多样化和多模式的立体课程体系,为学生提供适合的课程学习和个性化学术发展途径。     

基础有机化学教学与前沿科学研究的融合——共价有机骨架材料的成键方式

作为材料研究领域的明星,共价有机框架材料的研究是基于有机化学反应的成功选择和合成条件的不断优化。本文探讨将共价有机框架材料的成键方式引入有机化学教学课堂的途径,阐述有机化学反应在新型纳米材料设计合成中的应用。科教融合教学模式不仅能够培养学生掌握知识、运用知识解决实际复杂问题的能力;同时可以调动学生的学习兴趣、拓展科研视野、激发科研热情;更能在科研成果中增强学生的专业认同感、培养学生的创新意识和社会担当。科教融合是实现创新人才培养的一个重要环节。     

科研促进近化学专业物理化学教学探索与实践

探讨物理化学课程教学与纳米能源材料领域前沿科研成果有机结合的教学模式,培养学生的创新兴趣、多元化思维及科研素质。全面提高学生的综合能力和独立工作能力,为其今后从事科学技术研发奠定理论基础。     

研究性与系统性相结合的有机合成实验教学实践

为了培养学生的创新能力和实践能力,使学生较全面地掌握有机合成实验理论知识和实验技能,开展了有机合成实验研究性和系统性结合的教学探索和实践。在课程建设和教学过程中,贯彻以学生为主体的教学改革思路与方法。从教学内容和模式、授课方式、考核方式等多个教学环节进行探索研究,科教融合,结合实际课堂教学,倡导启发式教学方法。研究型教学模式的实施有效地调动了学生自主研究性学习的积极性,有利于提高学生的综合实践能力,促进实验教学与科学研究的衔接。     

“学案式”基础化学实验报告探讨与实践

Lab reports are an integral part of the fundamental chemical laboratory teaching and necessary for students to master the chemical knowledge. However, there are some problems such as simple contents in current teaching and learning of fundamental chemistry laboratories in universities. In this paper, a "learning-guidance mode" lab report based on classical experiments was studied to enrich the format and contents of the lab report. Upon examination, the contents of the "learning-guidance mode" lab report throughout every aspect and whole process of laboratory teaching can help students to establish self-learning consciousness and improve self-learning ability and exploration spirit. Meanwhile, it can also train students to possess capability of scientific thinking and solving problems, thus enhancing the effect of teaching of fundamental chemistry laboratory.