Preparation and characterization of metal-chitosan nanocomposites

Various metal-chitosan nanocomposites were synthesized, including silver (Ag), gold (Au), platinum (Pt), and palladium (Pd) in aqueous solutions. Metal nanoparticles were formed by reduction of corresponding metal salts with NaBH4 in the presence of chitosan. And chitosan molecules adsorbing onto the surface of as-prepared metal nanoparticles formed the corresponding metal-chitosan nanocomposites. Transmission electron microscopy (TEM) images and UV-vis spectra of the nanocomposites revealed the presence of metal nanoparticles. Comparison of all the resulting particles size, it shows that silver nanoparticles are much larger than others (Au, Pt and Pd). In addition, the difference in particles size leads to develop different morphologies in the films cast from prepared metal-chitosan nanocomposites. Polarized optical microscopy (POM) images show a batonet-like structure for Ag-chitosan nanocomposites film, while for the films cast from other metal (Au, Pt, and Pd)-chitosan nanocomposites, some branched-like structures with a few differences among them were observed under POM observation.     

Synthesis and characterization of gold nanoparticles stabilized by palladium(II) phosphine thiol

This work is focused on the synthesis of innovative hybrids made by linking gold nanoparticles to protected organometallic Pd(II) thiolate. The organometallic protected Pd(II) thiolate, i.e. trans-thioacetate-ethynylphenyl-bis(tributylphosphine)palladium(II) has been synthesized, in situ deprotected and linked to Au nanoparticles. In this way new hybrid, with a direct link between Pd(II) and Au nanoparticles through a single S bridge, has been isolated. The combination of the organometallic Pd(II) thiol with gold nanoparticles allows the enhancement and tailoring of electronic and optical properties of the new organic-inorganic nano-compound. Single-crystal gold nanoparticles, uniform in shape and size were obtained by applying a modified two-phase method (improved Brust-Schiffrin reaction). In addition, the chemical environment of the Au nanoparticles was investigated and a covalent bonding between Au nanoparticles and the organometallic thiols was observed.     

Formation of Pd/Au nanostructures from Pd nanowires via galvanic replacement reaction

Bimetallic nanostructures with non-random metal atoms distribution are very important for various applications. To synthesize such structures via benign wet chemistry approach remains challenging. This paper reports a synthesis of a Au/Pd alloy nanostructure through the galvanic replacement reaction between Pd ultrathin nanowires (2.4 +/- 0.2 nm in width, over 30 nm in length) and AuCl3 in toluene. Both morphological and structural changes were monitored during the reaction up to 10 h. Continuous changes of chemical composition and crystalline structure from Pd nanowires to Pd68Au32 and Pd45Au55 alloys, and to Au nanoparticles were observed. More interestingly, by using combined techniques such as high-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), energy dispersive X-ray spectrometry (EDS), UV-vis absorption, and extended X-ray absorption fine structure (EXAFS) spectroscopy, we found the formation of Pd68Au32 non-random alloy with Au-rich core and Pd-rich shell, and random Pd45Au55 alloy with uniformly mixed Pd and Au atom inside the nanoparticles, respectively. Density functional theory (DFT) calculations indicated that alkylamine will strongly stabilize Pd to the surface, resulting in diffusion of Au atoms into the core region to form a non-random alloy. We believe such benign synthetic techniques can also enable the large scale preparation of various types of non-random alloys for several technically important catalysis applications.     

碳纳米粒子支撑的钯纳米催化剂在甲酸氧化中的电催化活性

采用化学还原法制备了碳纳米粒子支撑的钯纳米结构(Pd-CNP). 透射电镜表征显示在Pd-CNP纳米复合物中,金属Pd呈菜花状结构,粒径约20~30 nm。它们由许多更小的Pd纳米粒子（3~8 nm）组成. 电化学研究表明,虽然Pd-CNP的电化学活性面积比商业Pd黑低40%（可能原因是部分Pd表面被一层碳纳米粒子覆盖）,但其对甲酸氧化却表现出更好的电催化活性：质量比活性和面积比活性都比Pd黑高几倍. 催化活性增强的原因可能是碳纳米粒子支撑的Pd纳米结构具有特殊的层次化结构,可以形成更多的活性位,以及表面位更利于反应进行.     

无表面活性剂条件下一锅法制备金属/氧化锌复合材料用于催化二氧化碳加氢制甲醇反应

Catalytic hydrogenation of CO₂ to methanol is an important chemical process owing to its contribution in alleviating the impacts of the greenhouse effect and in realizing the requirement for renewable energy sources. Owing to their excellent synergic functionalities and unique optoelectronic as well as catalytic properties, transition metal/ZnO (M/ZnO) nanocomposites have been widely used as catalysts for this reaction in recent years. Development of size-controlled synthesis of metal/oxide complexes is highly desirable. Further, because it is extremely difficult to achieve the strong-metal-support-interaction (SMSI) effect when the M/ZnO nanocomposites are prepared via physical methods, the use of chemical methods is more favorable for the fabrication of multi-component catalysts. However, because of the requirement for an extra H₂ reduction step to obtain the active metallic phase (M) and surfactants to control the size of nanoparticles, most M/ZnO nanocomposites undergo two- or multi-step synthesis, which is disadvantageous for the stable catalytic performance of the M/ZnO nanocomposites. In this work, we demonstrate facile one-pot synthesis of M/ZnO (M = Pd, Au, Ag, and Cu) nanocomposites in refluxed ethylene glycol as a solvent, without using any surfactants. During the synthesis process, Pd and ZnO species can stabilize each other from further aggregation by reducing their individual surface energies, thereby achieving size control of particles. Besides, NaHCO₃ serves as a size-control tool for Pd nanoparticles by adjusting the alkaline conditions. Ethylene glycol serves as a mild reducing agent and solvent owing to its capacity to reduce Pd ions to generate Pd crystals. The nucleation and growth of Pd particles are achieved by thermal reduction, while the ZnO nanocrystals are formed by thermal decomposition of Zn(OAc)₂. X-ray diffraction patterns of the M/ZnO and ZnO were analyzed to study the phase of the nanocomposites, and the results show that no impurity phase was detected. Transmission electron microscopy (TEM) was used to study the morphology and structural properties. In addition, X-ray photoelectron spectroscopy analysis was performed to further confirm the formation of M/ZnO hybrid materials, and the results confirm SMSI between Pd and ZnO. Inductively coupled plasma mass spectrometry was used to check the actual elemental compositions, and the results show that the detected atomic ratios of Pd/Zn were consistent with the values in the theoretical recipe. To investigate the effects of the Pd/Zn molar ratios and the added amount of NaHCO₃ on Pd size, the average sizes of Pd particles were calculated, and the results were confirmed by TEM observation. The Cu/ZnO/Al₂O₃ composite is a widely known catalyst for hydrogenation of CO₂ to methanol, and other M/ZnO composites are also catalytic for this reaction. Therefore, different M/ZnO hybrids were further studied as catalysts for hydrogenation of CO₂ to methanol, among which Pd/ZnO (1 : 9) demonstrated the best performance (30% CO₂ conversion, 69% methanol selectivity, and 421.9 g_methanol·(kg catalyst·h)^-1 at 240 ℃ and 5 MPa. The outstanding catalytic performance may be explained by the following two factors: first, Pd is a good catalyst for the dissociation of H₂ to give active H atoms, and second, SMSI between Pd and ZnO favors the formation of surface oxygen vacancies on ZnO. Moreover, most M/ZnO composites exhibit excellent performance in methanol selectivity, especially the Au/ZnO catalyst, which has the highest methanol selectivity (82%) despite having the lowest CO₂ conversion. Hopefully, this work would provide a simple route for synthesis of M/ZnO nanocomposites with clean surfaces for catalysis.     

有序介孔碳CMK-3负载金纳米微粒复合材料的制备和表征

分别采用等体积浸渍-甲醛还原、等体积浸渍-氢气还原及溶胶负载法在介孔碳CMK-3上负载金纳米微粒;利用透射电镜和粉末X射线衍射仪对比分析了采用3种方法得到的复合材料的微结构和相组成;并测定了采用溶胶负载法得到的不同金含量的复合材料的热稳定性.结果表明,所制备的金纳米微粒的尺寸因制备方法不同而呈现明显差异;负载于复合材料中的金纳米微粒具有很好的热稳定性.     

The synthesis and optical properties of the heterostructured ZnO/Au nanocomposites

ZnO/Au heterostructured nanoparticles were formed through epitaxial growth of Au on the ZnO seeds. The morphology and structure of ZnO/Au nanocomposites were investigated by TEM and XRD analysis. The nanocontact between Au and ZnO results in red-shift of surface plasmon of the Au and increase the intensity of Raman signals of ZnO. Heterostructured ZnO/Au nanocomposites also enhance chemical stability of ZnO in aqueous solution.     

光化学合成Au核@Pd壳复合纳米粒子及其表征

在PEG-丙酮溶液体系中, 采用紫外光辐射还原Au(Ⅲ), Pd(Ⅱ)离子混合物和以Au晶种为核、紫外光辐射还原Pd(Ⅱ)使其沉积在Au晶种表面上这两种方法, 合成了Au核@Pd壳复合纳米粒子. 通过改变Au(Ⅲ)离子或Au晶种对Pd(Ⅱ)离子的摩尔比调节复合粒子的尺寸和Pd壳厚度, 分别获得了直径范围为5.6~4.6 nm和4.6~6.2 nm的复合粒子. 利用UV-Vis吸收光谱、TEM、HR-TEM和XPS等表征手段, 证明了合成的纳米粒子为核-壳复合结构. 研究了Au@Pd纳米粒子的直径随溶液中Au(Ⅲ)/Pd(Ⅱ)摩尔比的改变而变化的规律; 对Au核向Pd壳的供电子作用以及复合粒子的光化学形成机理进行了讨论.     

Fe3O4/Polypyrrole/Au nanocomposites with core/shell/shell structure: synthesis, characterization, and their electrochemical properties

Uniform Fe3O4 nanospheres with a diameter of 100 nm were rapidly prepared using a microwave solvothermal method. Then Fe304/polypyrrole (PPy) composite nanospheres with well-defined core/shell structures were obtained through chemical oxidative polymerization of pyrrole in the presence of Fe3O4; the average thickness of the coating shell was about 25 nm. Furthermore, by means of electrostatic interactions, plentiful gold nanoparticles with a diameter of 15 nm were assembled on the surface of Fe3O4/PPy to get Fe3O4/PPy/Au core/shell/shell structure. The morphology, structure, and composition of the products were characterized by transmission electronic microscopy (TEM), scanning electronic microscopy (SEM), X-ray powder diffraction (XRD), and Fourier transform infrared (FT-IR) spectroscopy. The resultant nanocomposites not only have the magnetism of Fe3O4 nanoparticles that make the nanocomposites easily controlled by an external magnetic field but also have the good conductivity and excellent electrochemical and catalytic properties of PPy and Au nanoparticles. Furthermore, the nanocomposites showed excellent electrocatalytic activities to biospecies such as ascorbic acid (AA).     

Electrosynthesis of nanocomposites of Ag,Au, Pd nanoparticles with aluminum(III), zinc(II), and titanium(IV) oxide-hydroxides

Journal of Solid State Electrochemistry - The two-step electrosyntheses of metal nanoparticles (MNP) (M = Pd, Ag, Au) nanocomposites with aluminum(III), zinc(II), titanium(IV)...     

Preparation and characterization of acrylic polymer–nanogold nanocomposites from 3-mercaptopropyltrimethoxysilane encapsulated gold nanoparticles

In this study, acrylic polymer–nanogold nanocomposites and their cast films were prepared from an acrylic copolymer and 3-mercaptopropyltrimethoxysilane (MPS) stabilized gold nanoparticles by a sol–gel reaction. The acrylic copolymer was synthesized from methyl methacrylate (MMA) and 3-(trimethoxysilyl)propyl methacrylate (MSMA). The Si–OMe groups of MPS on the surface of gold nanoparticles (MPS–Au) provided the further reaction with the same groups of MSMA, hence the covalent bonds between polymers and MPS–Au nanoparticles were formed. FE-SEM images show MPS–Au nanoparticles are dispersed well in the prepared nanocomposites, and no large aggregation is occurred. TGA results indicate that the decomposed temperatures (T_d) of low Au-content (0.1 wt.%) nanocomposites are higher than these of the acrylic copolymer and high Au-content (1.0 wt.%) nanocomposites. The temperature of maximum decomposed rate (T_p) of each prepared nanocomposite is higher than that of the acrylic copolymer. The hardness of the cast film increases with increasing the Au content. The results show the improved thermal stability and application potentials of the prepared acrylic polymer–nanogold nanocomposites.     

Ternary Ag/Polyaniline/Au nanocomposites: Preparation,characterization and electrochemical properties

Ternary Ag/Polyaniline/Au nanocomposites were synthesized successfully by immobilizing of Au nanoparticles (NPs) on the surface of Ag/Polyaniline (PANI) nanocomposites. Ag/PANI nanocomposites were prepared via in situ chemical polymerization of aniline in the presence of 4-aminothiophenol (4-ATP) capped silver colloidal NPs. Then, uniform gold (Au) NPs were assembled on the surface of resulted Ag/PANI nanocomposites through electrostatic interaction to get Ag/Polyaniline/Au nanocomposites. The nanocomposites were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), ultraviolet visible spectroscopy (UV-Vis), thermogravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FTIR). Moreover, Ag/PANI/Au nanocomposites were immobilized on the surface of a glassy carbon electrode and showed enhanced electrocatalytic activity for the reduction of H₂O₂ compared with Ag/PANI.     

A novel hydrogen peroxide sensor based on Ag nanoparticles electrodeposited on chitosan-graphene oxide/cysteamine-modified gold electrode

A novel strategy to fabricate a hydrogen peroxide sensor based on Ag nanoparticles electrodeposited on chitosan-graphene oxide nanocomposites/cysteamine-modified gold (Au) electrode was reported. The chitosan-graphene oxide nanocomposites were first assembled on a cysteamine-modified Au electrode to produce chitosan-graphene oxide/cysteamine/Au electrode. Then Ag nanoparticles were electrodeposited on the modified Au electrode and formed Ag nanoparticles/chitosan-graphene oxide/cysteamine/Au electrode. The chitosan-graphene oxide nanocomposites and the electrodeposited Ag nanoparticles were characterized by atomic force microscopy and scanning electron microscopy. The results showed the Ag nanoparticles were uniformly dispersed on the chitosan-graphene oxide/cysteamine/Au electrode. The cyclic voltammagrams and amperometric method were used to evaluate electrocatalytic properties of the Ag nanoparticles/chitosan-graphene oxide/cysteamine/Au electrode. The results showed that the modified electrode displayed good electrocatalytic activity to the reduction of hydrogen peroxide with a detection limit of 0.7 μM hydrogen peroxide based on a signal-to-noise ratio of 3. The sensor has good reproducibility, wide linear range, and long-term stability.     

Biomolecule-coated metal nanoparticles on titanium

Immobilizations of nanoparticles and biomolecules on biocompatible substrates such as titanium are two promising approaches to bringing new functionalities to Ti-based biomaterials. Herein, we used a variety of X-ray spectroscopic techniques to study and better understand metal-thiolate interactions in biofunctionalized metal nanoparticle systems supported on Ti substrates. Using a facile one-step procedure, a series of Au nanoparticle samples with varied biomolecule coatings ((2-mercatopropionyl)glycine (MPG) and bovine serum albumin (BSA)) and biomolecule concentrations are prepared. Ag and Pd systems are also studied to observe change with varying metal composition. The structure and properties of these biomolecule-coated nanoparticles are investigated with scanning electron microscopy (SEM) and element-specific X-ray techniques, including extended X-ray absorption fine structure (Au L(3)-edge), X-ray absorption near-edge structure (Au L(3), Ag L(3), Pd L(3), and S K-edge), and X-ray photoelectron spectroscopy (Au 4f, Ag 3d, Pd 3d, and S 2p core level). It was found that, by comparison of SEM and X-ray spectroscopy results, the coating of metal nanoparticles with varying model biomolecule systems can have a significant effect on both surface coverage and organization. This work offers a facile chemical method for bio- and nanofunctionalization of Ti substrates as well as provides a physical picture of the structure and bonding of biocoated metal nanoparticles, which may lead to useful applications in orthopedics and biomedicine.     

用原位液体池透射电镜技术表征金属钯在球形金纳米颗粒表面的异质沉积

采用原位液体池透射电镜技术,在扫描透射电子显微镜(STEM)中,实时观察溶液中金属钯(Pd)在金(Au)纳米颗粒及团簇周围的异质沉积过程。通过对该动态过程的定量分析,结合高分辨透射电子显微镜(HRTEM)对样品进行形貌与结构表征,研究异质沉积的机理。结果表明,电子束辐照下Au-Pd异质结构纳米颗粒的形成存在两种主要机制:第一种机制中,Pd在Au纳米颗粒表面的生长是以岛状沉积开始,随着时间推移,出现Pd岛的结构弛豫和沿着Au颗粒表面的迁移扩展。伴随Pd的不断沉积和弛豫,Au-Pd复合颗粒的外接圆直径表现为震荡生长,而Au表面的Pd覆盖率显示出随时间单调增加的趋势。第二种机制中,由于Pd单体在Au纳米颗粒上的沉积位点有限,使部分被还原的Pd在Au颗粒以外区域进行同质形核与生长形成Pd团簇,之后再与Au颗粒上的Pd岛合并。进一步的结果分析显示,Au颗粒外围的Pd沉积体为多晶结构,由随机取向的Pd纳米晶粒构成。     

Preparation of Au/TiO2 nanocomposites and their catalytic activity for DPPH radical scavenging reaction

Au/TiO2 nanocomposites have been prepared by UV photolysis or chemical reduction of a Au(III) complex formed on a spherical or a rodlike TiO2 support, and their catalytic activity for 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging reaction was investigated. The chemical reduction with dimethylamine borane (DMAB) provided smaller gold nanoparticles than those synthesized by UV photolysis. Type of the TiO2 also affected the size of gold particles; smaller gold particles were deposited on the spherical TiO2 support than on rodlike one. For the radical scavenging reaction, the Au/TiO2 nanocomposites prepared by chemical reduction exhibited a higher catalytic activity than those photochemically prepared, and rodlike TiO2 provided a higher activity than spherical one. The effects of preparation methods and type of TiO2 supports on the catalytic activity are discussed.     

Development of Palladium Surface‐Enriched Heteronuclear Au–Pd Nanoparticle Dehalogenation Catalysts in an Ionic Liquid

Heteronuclear Au–Pd nanoparticles were prepared and immobilized in the functionalized ionic liquid [C₂OHmim][NTf₂]. The structural and electronic properties of the nanoparticles were characterized by a range of techniques and the surface of the nanoparticles was found to be enriched in Pd. Moreover, the extent of Pd enrichment is easily controlled by varying the ratio of Au and Pd salts used in the synthesis. The heteronuclear nanoparticles were found to be effective catalysts in dehalogenation reactions with no activity observed for the pure Au nanoparticles and only limited activity for the pure Pd nanoparticles. The activity of the heteronuclear nanoparticles may be attributed to charge transfer from Pd to Au and consequently to more efficient reductive elimination.     

Deposition of gold nanoparticles on β-FeOOH nanorods for detecting melamine in aqueous solution

This study demonstrates a facile but efficient approach to deposit metallic (gold) nanoparticles on β-FeOOH nanorods to obtain Au/β-FeOOH nanocomposites without the assistance of any polymers or surfactants at ambient conditions. In this method, a strong reducing agent (NaBH(4)) can be used to extensively produce Au nanoparticles, converting β-FeOOH into Fe(3)O(4) and depositing gold particles onto magnetic Fe(3)O(4) simultaneously. The microstructure, composition, and chemical properties of the obtained nanocomposites are characterized by various advanced techniques, including transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray diffraction (XRD), and UV-vis spectroscopy. Moreover, the Au/β-FeOOH nanocomposite can be used to detect trace melamine using UV spectrum in the ultraviolet wavelength range (190-260 nm), in which the nanocomposites show a higher sensitivity toward melamine due to the promotion of symmetry-forbidden bands (n→π(*)) of melamine molecules and also avoid the disturbance of commercial products containing solid colloids or food colorings that distort visual spectrum during the detection of chemical sensing. The deposition mechanisms and their sensing detection toward melamine are discussed.     

Preparation and electrochemical properties of MnO2 nanosheets attached to Au nanoparticles on carbon nanotubes

A wet chemical route for the preparation of MnO(2) nanosheet/Au nanoparticle/MWNT hybrid materials is developed. The Au nanoparticles are prepared by reducing AuCl(4)(-) with citrate and attached to thiol-modified MWNTs. Owing to the reducing property and the binding ability to Mn-containing species of capping agents surrounded the Au nanoparticles, the MnO(2) nanosheets are formed on the surface of Au nanoparticles. The ternary nanocomposites of MnO(2)/Au/MWNT have been characterized by transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and FT-IR spectroscopy. The affiliation of MnO(2) nanosheets into the hybrids remarkably enhances the electrocatalytic performance of Au nanoparticle/MWNT towards the oxygen reduction reaction. The specific capacitance of the ternary hybrids is also increased dramatically comparing with that of Au/MWNT.     

Sensitive determination of dopamine in the presence of uric acid and ascorbic acid using TiO2 nanotubes modified with Pd, Pt and Au nanoparticles

A simple modified TiO(2) nanotubes electrode was fabricated by electrodeposition of Pd, Pt and Au nanoparticles. The TiO(2) nanotubes electrode was prepared using the anodizing method, followed by modifying Pd nanoparticles onto the tubes surface, offering a uniform conductive surface for electrodeposition of Pt and Au. The performance of the modified electrode was characterized by cyclic voltammetry and differential pulse voltammetry methods. The Au/Pt/Pd/TiO(2) NTs modified electrode represented a high sensitivity towards individual detection of dopamine as well as simultaneous detection of dopamine and uric acid using 0.1 M phosphate buffer solution (pH 7.00) as the base solution. In both case, electro-oxidation peak currents of dopamine were linearly related to accumulated concentration over a wide concentration range of 5.0 × 10(-8) to 3.0 × 10(-5) M. However in the same range of dopamine concentration, the sensitivity had a significant loss at Pt/Pd/TiO(2) NTs electrode, suggesting the necessity for Au nanoparticles in modified electrode. The limit of the detection was determined as 3 × 10(-8) M for dopamine at signal-to-noise ratio equal to 3. Furthermore, the Au/Pt/Pd/TiO(2) NTs modified electrode was able to distinguish the oxidation response of dopamine, uric acid and ascorbic acid in mixture solution of different acidity. It was shown that the modified electrode possessed a very good reproducibility and long-term stability. The method was also successfully applied for determination of DA in human urine samples with satisfactory results.