油棕废弃物热解的TG-FTIR分析

利用热重分析(TGA)和傅里叶红外光谱(FTIR)联用技术对油棕废弃物的热解特性及其气体产物的释放特性进行了研究,采用一级反应计算了油棕废弃物的热解动力学参数。研究表明,油棕废弃物较易于热解,失重集中在220℃～400℃,其热解活化能较小,约为60kJ/mol;气体产物的析出与生物质的热解失重有着相似的特性,气体产物主要在200℃～400℃析出,主要成分为H2O、CO2、CO、CH4和有机碳水化合物的混合物, 其中CO2和有机混合物的析出温度较低,而CO和CH4的析出温度相对较高。随着温度的进一步升高(>400℃),除少量的CO2和CO外,无其他气体产物析出。气体产物的析出量与生物质样品的化学组成和结构有关,CO2和有机混合物的析出与生物质的热解失重曲线(DTG)有着相似的特性,是引起油棕废弃物热解失重的主要原因。     

Microwave-assisted pyrolysis of biomass: Catalysts to improve product selectivity

This study was intended to evaluate the effects of catalysts on product selectivity of microwave-assisted pyrolysis of corn stover and aspen wood. Metal oxides, salts, and acids including K₂Cr₂O₇, Al₂O₃, KAc, H₃BO₃, Na₂HPO₄, MgCl₂, AlCl₃, CoCl₂, and ZnCl₂ were pre-mixed with corn stover or aspen wood pellets prior to pyrolysis using microwave heating. The thermal process produced three product fractions, namely bio-oil, gas, and charcoal. The effects of the catalysts on the fractional yields were studied. KAc, Al₂O₃, MgCl₂, H₃BO₃, and Na₂HPO₄ were found to increase the bio-oil yield by either suppressing charcoal yield or gas yield or both. These catalysts may function as a microwave absorbent to speed up heating or participate in so-called “in situ upgrading” of pyrolytic vapors during the microwave-assisted pyrolysis of biomass. GC–MS analysis of the bio-oils found that chloride salts promoted a few reactions while suppressing most of the other reactions observed for the control samples. At 8 g MgCl₂/100 biomass level, the GC–MS total ion chromatograms of the bio-oils from the treated corn stover or aspen show only one major furfural peak accounting for about 80% of the area under the spectrum. We conclude that some catalysts improve bio-oil yields, and chloride salts in particular simplify the chemical compositions of the resultant bio-oils and therefore improve the product selectivity of the pyrolysis process.     

Physicochemical properties evolution of chars from palm kernel shell pyrolysis

To clarify the effect of the pyrolysis operating conditions of the biomass on the physicochemical properties of the char and its combustion reactivity, palm kernel shell was pyrolyzed at different temperatures (400–700 °C). Analyses such as proximate and ultimate analysis, XRD, FTIR, N₂ adsorption, and SEM were used to investigate the physicochemical properties of biochar samples. The results show that an increase in pyrolysis temperature led to a development of pore structure and specific surface area of the produced biochar, which was beneficial for improving the biochar combustion reactivity. Besides, with increase in pyrolysis temperature, the carbon content exhibits a raise trend, but the oxygen and hydrogen contents exhibit the opposite behavior, and the aromaticity and graphitization degree of biochar produced at high temperature also increase. The combustion reactivity of biochar was found to be highly dependent on the pyrolysis temperature, and the aromatic structure and graphitization degree have greater effects on biochar combustion reactivity than those of the specific surface area and pore structure.     

生物油酸性组分分离精制研究

生物油因水分含量高和呈酸性未能作为高品位能源直接规模化应用。利用分子蒸馏技术将生物油水分与酸性组分作为整体对象进行分离,既得到生物油酸性组分富集馏分,又获得了水分含量低、酸性较弱与热值较高的精制生物油Ⅰ（蒸馏重质馏分）与精制生物油Ⅱ（常温冷凝馏分）。同时,具体考察了精制前后生物油的pH值、热值和水分等参数的变化规律。研究表明,生物油的水分与酸性组分得到有效分离,精制生物油Ⅰ和Ⅱ的低级羧酸含量从原始生物油的18.85%分别降低至0.96%和2.2%     

棕榈壳酶解-温和酸解木质素的结构及热解特性研究

采用酶解/温和酸解法提取了棕榈壳和麦秆的木质素(EMALs),利用傅里叶红外光谱(FT-IR)、裂解器-气相色谱质谱联用(Py-GC/MS)和热重-红外联用(TG-FTIR)技术,对两种EMALs的化学结构和热解特性进行了对比研究,并采用Ozaw a-Flynn-Wall方法计算了其热解反应的活化能。结果表明,棕榈壳EM AL和麦秆EM AL均为HGS型木质素。500℃下,两种EMALs的热解产物主要包括酚类、酸类和少量的醇类、醛酮类等化合物;棕榈壳EMAL热解酚类产物中H、G、S型单体酚类的比例分别为47.61%、25.64%和17.18%,而麦秆EMAL分别为23.66%、51.90%和15.50%。在热解反应主失重区(200-380℃),棕榈壳EM AL的主失重速率(50.80%/min)低于麦秆EM AL(78.63%/min);但棕榈壳EM AL热解同时存在肩状失重峰(265℃,27.40%/min),这与其较多H结构产物的释放相关。H型结构产物释放的放热效应降低了棕榈壳EMAL热解初期的活化能(20%,127.92 k J/mol),同时使其热解过程(20%-80%)的平均活化能(152.32 k J/mol)低于麦秆EMAL(161.75 k J/mol)。     

Parallels between slow pyrolysis of Estonian oil shale and forest biomass residues

Different types of forest residual biomass, including pine wood, pine bark and spruce needles, and Estonian Kukersite oil shale, were parallelly subjected to the slow pyrolysis in similar conditions. A Fischer assay, modeling industrial semi-coking retorts, was used. Both the yield and the composition of liquid, gaseous and solid products of pyrolysis were determined. FTIR-spectroscopic and chromatographic methods were used to study products group and individual composition. Common and specific features in biomass and oil shale semi-coking have been described. In comparison with oil shale, the biomass yielded less oil and more gas. Specifically large amounts of reaction water and carbon dioxide were obtained in biomass pyrolysis resulting in formation of significantly deoxygenated liquid and solid products. Bio-oils can be distinguished by the solubility in conventional solvents. Kukersite shale oil and the benzene-soluble fractions of different bio-oils were characterized by similar group composition.     

Fluidised bed pyrolysis of Moroccan oil shales using the hamburg pyrolysis process

In the present work, the pyrolysis of the Moroccan Timahdit oil shale was studied, using a fluidised bed process. Four experiments were carried out at different temperatures between 520 and 630 °C. By mass balance could be shown that in relation to the kerogen content up to 60 wt.% of oil and 25 wt.% of gas are obtained. These are 40% higher yields compared with the Fischer assay. It was shown that the carbon in the residue, which is much lower (only 12 wt.%) than in the Fischer assay (26 wt.%), explains this difference.     

Microwave pyrolysis of biomass

Because of the inherent moisture and large particle size of wood used in the Forest Products Industry, there has been regional interest in exploring the feasibility of processing wood, cellulose, and other such related materials using microwave dielectric-loss heating. A research project was undertaken in the late 1970’s to determine the important variables altering the rate of microwave-induced reactions of this polymeric material. The research presented dates from that period. Reaction proudcts were measured in detail and some optimization of the coupling of the microwave energy to the large particles was studied. Results and principal findings at the time of the study are presented in this paper as well as two papers by the author in the cited literature. Suggestions for future directions for this type of study are also presented.     

Fast pyrolysis of biomass

The development of viable fast pyrolysis processes for biomass and other carbonaceous feedstocks will offer significant advantages over conventional pyrolysis, flash pyrolysis and gasification processes with respect to product yield quality and flexibility. Fast pyrolysis is defined and related to other biomass thermochemical conversion processes in some detail. Brief references are made to corresponding coal, hydrocarbon and oil conversion research and development. Proposed mechanisms and chemical pathways are reviewed, potential products. product upgrading and product applications are identified. Fast pyrolysis research is reviewed on both the fundamental bench-scale level and the applied process development level.     

Determination of ergosterol as an indicator of fungal biomass in various samples using non-discriminating flash pyrolysis

Ergosterol is the major sterol constituent of most fungi. Since it is present in negligible amounts in higher plants, it can be used as a chemical marker for the presence of fungal contamination. A number of different ergosterol assays have been developed for the quantification of fungi in various samples. The paper presents the development of a new method for ergosterol detection based on the combination of non-discriminating flash pyrolysis with gas chromatography/mass spectrometry (Py-GC/MS). The design of the non-discriminating Py-GC/MS systems assures efficient transfer of high-molecular-weight pyrolysis products to the GC column for separation, followed by analyte detection by MS. The method was tested on different types of samples, including baker's yeast (Saccharomyces cerevisiae), moldy bread, indoor dust, and a leaf infected with powdery mildew. Ergosterol was detected in all these samples at levels ranging from approximately 4mg/g for the baker's yeast to approximately 6mug/g for household dust. The main benefits of non-discriminating pyrolysis over other techniques include elimination of the need for sample preparation, small sample size required and short analysis time.     

Biosurfactants production by Pseudomonas aeruginosa FR using palm oil

Biosurfactants production by a strain of Pseudomonas aeruginosa using palm oil as a sole carbon source was investigated. The experiments were carried out in 500-mL conical flasks containing 100 mL of mineral media supplemented with palm oil as the sole carbon source. The P. aeruginosa FR strain was able to reduce surface tension of three tested inorganic media. Rotation velocities from 100 to 150 rpm provided free-cell fermented media with the lowest surface tension of approx 33 mN/m. Emulsification index results of even 100% were achieved when diesel was used as oil phase. Eight surface-active compounds produced by the bacterium were identified by mass spectrometry.     

Introduction to pyrolysis of biomass

The pyrolytic properties of biomass are controlled by the chemical composition of its major components, namely cellulose, hemicelluloses and lignin and their minor components including extractives and inorganic materials. Pyrolysis of these materials proceeds through a series of complex, concurrent and consecutive reactions and provides a variety of products.Pyrolysis cellulose at lower temperatures below 300° C involves reduction in molecular weight, evolution of water, carbon dioxide and carbon monoxide and formation of char. On heating at higher temperature 300–500° C, the molecule is rapidly depolymerized to anhydroglucose units that further reacts to provide a XXXX pyrolyXXXXA: still higher temperatures, the anhydrosugar compounds undergo fussion, dehydration disproportionation and decarboxylation reaction to provide a mixture of low molecular weight gaseous and volatile produces. The composition of these produces and mechanism and kinetics of their production are reported.     

Kinetic analysis of catalytic slurry oil pyrolysis using thermogravimetric analysis

Journal of Thermal Analysis and Calorimetry - Pyrolysis is an important process for converting unconventional fuels, such as heavy oil, residues and oil sand, to high-value-added light products....     

High-temperature gasification kinetics of biomass pyrolysis

The rate of gas formation from wood pyrolysis has been experimentally measured at temperatures from 300°C to 1000°C. The formation rate of specific product gases has been measured rather than the rate of solid weight loss. Even for very fine particles, the rate becomes heat transfer limited a: high temperatures. The product gases also approach thermodynamic equilibrium rapidly at high temperatures. The results are corrected using the experimental residence time distribution.     

Biosurfactants production by Pseudomonas aeruginosa FR using palm oil

Biosurfactants production by a strain of Pseudomonas aeruginosa using palm oil as a sole carbon source was investigated. The experiments were carried out in 500-mL conical flasks containing 100 mL of mineral media supplemented with palm oil as the sole carbon source. The P. aeruginosa FR strain was able to reduce surface tension of three tested inorganic media. Rotation velocities from 100 to 150 rpm provided free-cell fermented media with the lowest surface tension of approx 33 mN/m. Emulsification index results of even 100% were achieved when diesel was used as oil phase. Eight surface-active compounds produced by the bacterium were identified by mass spectrometry.     

Study on pyrolysis kinetics of walnut shell

Slow pyrolysis of walnut shell which is a cheap and abundantly available solid waste was carried out using thermogravimetric analysis. The effects of raw material heating rate on the pyrolysis properties and kinetic parameters were investigated. A two-step consecutive reaction model were used to simulate the pyrolysis process. The kinetic parameters were established by using the pattern search method. Comparison between experimental data and the model prediction indicated that the two-step consecutive reaction model can better describe the slow pyrolysis of walnut shell as the formation of an intermediate during the pyrolysis process was taken into account.     

Transesterification of palm oil using supercritical methanol with co-solvent HCFC-141b

The transesterification of palm oil in supercritical methanol has been investigated without using any catalyst. HCFC-141b was used as co-solvent to reduce the molar ratio of methanol to palm oil under the milder conditions. The reaction was carried out in a flow-type tubular reactor. The residence time was fixed at 40 min. When the molar ratio of methanol to palm oil was set to 20:1 at 325 °C and 35 MPa, the optimum molar ratio of methanol to co-solvent was found to be 20:1. Addition of HCFC-141b increased FAME production even at the lower molar ratio of methanol to palm oil. In addition, a similar FAME content was obtained under the milder conditions (5 MPa lower pressure) compared with conditions without co-solvent at higher pressure. The role of HCFC-141b in the transesterification reaction under supercritical conditions was investigated.