Stereoselective Synthesis of [5‐[4,4,4,4′,4′,4′‐Hexafluoro‐N‐(2‐hydroxyethoxy)‐D‐valine]]‐ and [5‐[4,4,4,4′,4′,4′‐Hexafluoro‐N‐(2‐hydroxyethoxy)‐L‐valine]cyclosporin A

Addition of various amines to the 3,3‐bis(trifluoromethyl)acrylamides 10a and 10b gave the tripeptides 11a – 11f , mostly as mixtures of epimers (Scheme 3). The crystalline tripeptide 11f ₂ was found to be the N‐terminal (2‐hydroxyethoxy)‐substituted (R,S,S)‐ester HOCH₂CH₂O‐D ‐Val(F₆)‐MeLeu‐Ala‐O^tBu by X‐ray crystallography. The C‐terminal‐protected tripeptide 11f ₂ was condensed with the N‐terminus octapeptide 2b to the depsipeptide 12a which was thermally rearranged to the undecapeptide 13a (Scheme 4). The condensation of the epimeric tripeptide 11f ₁ with the octapeptide 2b gave the undecapeptide 13b directly. The undecapeptides 13a and 13b were fully deprotected and cyclized to the [5‐[4,4,4,4′,4′,4′‐hexafluoro‐N‐(2‐hydroxyethoxy)‐D ‐valine]]‐ and [5‐[4,4,4,4′,4′,4′‐hexafluoro‐N‐(2‐hydroxyethoxy)‐L ‐valine]]cyclosporins 14a and 14b , respectively (Scheme 5). Rate differences observed for the thermal rearrangements of 12a to 13a and of 12b to 13b are discussed.     

Synthesis and Properties of N,N′‐Bis(difuroxano [3,4‐b:3′,4′‐d]phenyl)oxalic Amide

N,N′‐Bis(difuroxano[3,4‐b:3′,4′‐d]phenyl)oxalic amide was synthesized via acylation, nitration, azidation, and pyrolysis‐denitrogenation from the starting materials of oxalyl chloride and 3,5‐dichloroaniline, under mild reaction conditions, with the yields of 81.0%, 82.0%, 86.0% and 81.7% respectively. The title compound and its precursors were characterized by ¹H NMR, IR, MS, and elemental analysis. The title compound has a density of 1.92 g·cm^?3 by a suspension method, a standard formation enthalpy of 979 kJ·mol^?1 calculated by Gaussian programs, a detonation velocity of 8.17 km·s^?1, and a detonation pressure of 31 GPa obtained by Kamlet Equation. The thermal decomposition reactions of the title compound at different heating rates were tested by differential scanning calorimetry (DSC). The kinetics parameters of the pyrolysis of the compound were calculated by Kissinger's method. The values of apparent activation energy (E_a) and pre‐exponential constant (A) were 226.7 kJ·mol^?1 and 10^23.17 s^?1 respectively. It was presupposed that N,N′‐bis(difuroxano[3,4‐b:3′,4′‐d]phenyl)oxalic amide would be a promising high energetic explosive with low sensitivity.     

Supramolecular Architectures of Four New Transition Metal Complexes with 3‐[4‐(Carboxymethoxy)phenyl]propanoic Acid and N‐[4‐(Carboxymethoxy)phenyl]iminodiacetic Acid

Four new transition metal complexes: [Cu(Hcppa)₂(H₂O)₂] ( 1 ), [Co₂(cppa)₂(H₂O)₁₀] ( 2 ), [Co₃(cpia)₂(H₂O)₈] · 2H₂O ( 3 ) and [Ni₃(cpia)₂(H₂O)₁₂] · 6H₂O ( 4 ) {H₂cppa = 3‐(4‐(carboxymethoxy)phenyl]propanoic acid; H₃cpia = N‐[4‐(carboxymethoxy)phenyl]iminodiacetic acid} were synthesized and characterized. Complexes 1 and 2 show mononuclear structures, complexes 3 and 4 exhibit dinuclear structures. All complexes extend to 3D supramolecular networks through hydrogen bonds, of which complexes 3 and 4 display microporous structures. In complexes 2 – 4 the water clusters are trapped by the cooperative association of coordinate interactions as well as hydrogen bonds, forming different 1D metal‐water chain structures. Thermal stabilities of complexes 1 – 4 were discussed.     

邻-(N-芳酰基-N-甲氨基苯)-二硫化合物的合成：通过N-甲基-2-单芳基苯并噻唑啉在溶剂中的自发偶联反应和它们的血管内皮生长因子抑制活性

N-甲基-2-单芳基苯并噻唑啉 (1) 在固体状态时可以稳定地储藏在空气中。但是,它们在不同溶剂中却表现出了不同的行为。在醇溶液或二甲亚砜-水的体系中,1相对稳定;而在其它有机溶剂如：丙酮,氯仿,二氯甲烷和乙酸乙酯等溶剂中,会发生自发偶联反应生成相应的邻-(N-芳酰基-N-甲氨基苯)-二硫化合物 (2)。对这些新的化合物 (1) 和 (2) 进行了体外人乳腺癌细胞 (MDA-MB-231) 血管内皮生长因子靶点筛选,大部分化合物都表现出了抑制活性。实验结果表明这两类化合物 (1) 和 (2) 作为血管内皮生长因子抑制剂值得进行深入研究。     

Synthesis of a new monomer N′‐(β‐methacryloyloxyethyl)‐2‐pyrimidyl‐(p‐benzyloxycarbonyl)aminobenzenesulfonamide and its copolymerization with N‐phenyl maleimide

The new monomer N′‐(β‐methacryloyloxyethyl)‐2‐pyrimidyl‐(p‐benzyloxy‐ carbonyl)aminobenzenesulfonamide (MPBAS) (M₁) is synthesized using sulfadiazine as parent compound. It could be homopolymerized and copolymerized with N‐phenyl maleimide (NPMI) (M₂) by radical mechanism using AIBN as initiator at 60 °C in dimethylformamide. The new monomer MPBAS and polymers were identified by IR, element analysis and ¹H NMR in detail. The monomer reactivity ratios in copolymerization were determined by YBR method, and r₁ (MPBAS) = 2.39 ± 0.05, r₂ (NPMI) = 0.33 ± 0.02. In the presence of ammonium formate, benzyloxycarbonyl groups could be broken fluently from MPBAS segments of copolymer by catalytic transfer hydrogenation, and the copolymer with sulfadiazine side groups are recovered. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2548–2554, 2000     

Copper(II) Complexes with N‐(9‐anthracenyl)‐N′‐(3‐pyridyl)urea (L) and a Derivative of L: Synthesis,Structure, and Fluorescent Properties

Three copper(II) complexes, [Cu₂(OAc)₄L₂] · 2CH₃OH ( 1 ), [CuBr₂L′₂(CH₃OH)] · CH₃OH ( 2a ), and [CuBr₂L′₂(DMSO)] · 0.5CH₃OH ( 2b ) {L = N‐(9‐anthracenyl)‐N′‐(3‐pyridyl)urea and L′ = N‐[10‐(10‐methoxy‐anthronyl)]‐N′‐(3‐pyridyl)urea} have been synthesized by the reaction of L with the corresponding copper(II) salts. Complex 1 shows a dinuclear structure with a conventional “paddlewheel” motif, in which four acetate units bridge the two Cu^II ions. In complexes 2a and 2b , the anthracenyl ligand L has been converted to an anthronyl derivative L′, and the central metal ion exhibits a distorted square pyramidal arrangement, with two pyridyl nitrogen atoms and two bromide ions defining the basal plane and the apical position is occupied by a solvent molecule (CH₃OH in 2a and DMSO in 2b ).     

RAFT Polymerization of N‐[3‐(Trimethoxysilyl)‐propyl]acrylamide and Its Versatile Use in Silica Hybrid Materials

Reversible addition–fragmentation chain transfer (RAFT) polymerization and characterization of an alkoxysilane acrylamide monomer using a trithiocarbonate chain transfer agent are described. Poly(N‐[3‐(trimethoxysilyl)propyl]acrylamide) (PTMSPAA) homopolymers are obtained with good control over the polymerization. A linear increase in the molecular weight is observed whereas the polydispersity values do not exceed 1.2 regardless of the monomer conversion. Moreover, PTMSPAA is used as a macro‐RAFT agent to polymerize N‐isopropylacrylamide (NIPAM). By varying the degree of polymerization of NIPAM within the block copolymer, different sizes of thermoresponsive particles are obtained. These particles are stabilized by the condensation of the alkoxysilane moieties of the polymers. Furthermore, a co‐network of silica and PTMSPAA is prepared using the sol–gel process. After drying, transparent mesoporous hybrids are obtained with a surface area of up to 400 m² g⁻¹.

     

A Copper(II) Ion‐Selective Potentiometric Sensor Based on N,N′,N″,N′′′‐Tetrakis(2‐pyridylmethyl)‐1,4,8,11‐tetraazacyclotetradecane in PVC Matrix

The simple PVC‐based membrane containing N,N′,N″,N′′′‐tetrakis(2‐pyridylmethyl)‐1,4,8,11‐tetraazacyclotetradecane (tpmc) as an ionophore and dibutyl phthalate as a plasticizer, directly coated on a glassy carbon electrode was examined as a new sensor for Cu²⁺ ions. The potential response was linear within the concentration range of 1.0×10^?1–1.0×10^?6 M with a Nernstian slope of 28.8 mV/decade and detection limit of 7.0×10^?7 M. The electrode was used in aqueous solutions over a wide pH range (1.3–6). The sensor exhibited excellent selectivity for Cu²⁺ ion over a number of cations and was successfully used in its determination in real samples.     

Synthesis and biological activity of novel N‐benzoyl‐N‐tert‐butyl‐N′‐(β‐triphenylgermyl)propionylhydrazines

A series of new N‐benzoyl‐N‐tert‐butyl‐N′‐(β‐triphenylgermyl)propionylhydrazines were synthesized by the condensation reaction of β‐triphenylgermyl propanoic acid with N‐benzoyl‐N‐tert‐butylhydrazines in good yields by using N,N′‐dicyclohexylcorbodiimide as dehydrating agent. These title compounds were evaluated for molting hormone mimicking activity. The results of bioassay showed that the compounds exhibit moderate larvicidal activity, and toxicity assays indicated that the title compounds can induce a premature, abnormal and lethal larval molt. We found that the title compounds possess potential anticancer activities in vitro. Copyright © 2002 John Wiley & Sons, Ltd.     

Synthesis of 1‐Acyl‐3,4‐dihydroquinazoline‐2(1H)‐thiones by Cyclization of N‐[2‐(Isothiocyanatomethyl)phenyl] Amides Generated in situ from N‐[2‐(Azidomethyl)phenyl] Amides

An efficient method for the preparation of 1‐acyl‐3,4‐dihydroquinazoline‐2(1H)‐thiones 5 has been developed. The reaction of N‐[2‐(azidomethyl)phenyl] amides 3 , easily prepared by a three‐step sequence starting with (2‐aminophenyl)methanols, with Ph₃P, followed by CS₂, allowed generation of N‐[2‐(isothiocyanatomethyl)phenyl]‐amide intermediates 4 , which underwent cyclization on treatment with NaH to furnish the corresponding desired products in generally good yields.     

Interaction of Bovine Serum Albumin with N‐(4‐Ethoxyphenyl)‐N′‐(4‐Antipyrinyl)Thiourea (EPAT) Using Spectroscopies

The interaction between N‐(4‐ethoxyphenyl)‐N′‐(4‐antipyrinyl)thiourea (EPAT) and bovine serum albumin (BSA) was studied by fluorescence spectroscopy in combination with UV absorption spectroscopy. The intrinsic fluorescence of bovine serum albumin was quenched by EPAT through a static quenching procedure. The binding constants of EPAT with BSA were estimated according to the fluorescence quenching results at different temperatures. The thermodynamic parameters: enthalpy change (ΔH) and entropy change (ΔS) were calculated to be ?10.69 kJ/mol and 42.64 J·mol^?1·K^?1 according to thermodynamic equations, respectively, and indicating that the binding force was suggested to be mainly a hydrophobic force. The effect of common ions on the binding constant was also investigated. A new fluorescence spectroscopy assay of the proteins was presented in this paper. The determination results of the proteins in bovine serum by means of this method were very close to those obtained using Coomassie Brilliant Blue G‐250 colorimetry.     

1H and 13C chemical shifts for acridines: Part XVIII. 9‐Chloroacridine and 9‐(N‐allyl)‐ and 9‐(N‐propargyl)acridinamine derivatives

The¹H and ¹³C NMR resonances for acridine derivatives 9‐substituted with chloro, allylamino and propargylamino groups were completely assigned using a concerted application of gs‐COSY, gs‐HMQC and gs‐HMBC experiments. 9‐(N‐Allyl)‐ and 9‐(N‐propargyl)acridinamine derivatives present amino–imino tautomerism including a large broadening of ¹H and ¹³C NMR signals at room temperature. To obtain suitable resolution, therefore, these latter compounds were studied at 370 K in DMSO‐d6 solutions and showed a complete shift towards the imino tautomers. Copyright © 2003 John Wiley & Sons, Ltd.     

Thermal Behavior of N,N＇Bis[N-（2,2,2-trinitroethyl）-N-nitro]ethylenediamine

The thermal behavior and kinetic parameters of the exothermic decomposition reaction of N‐N‐bis[N‐(2,2,2‐tri‐nitroethyl)‐N‐nitro]ethylenediamine in a temperature‐programmed mode have been investigated by means of differential scanning calorimetry (DSC). The results show that kinetic model function in differential form, apparent activation energy E_a and pre‐exponential factor A of this reaction are 3(1 ‐α)^2/3, 203.67 kJ·mol^?1 and 10^20.61s^?1, respectively. The critical temperature of thermal explosion of the compound is 182.2 °C. The values of ΔS^≠ ΔH^≠ and ΔG^≠ of this reaction are 143.3 J·mol^?1·K^?1, 199.5 kJ·mol^?1 and 135.5 kJ·mol^?1, respectively.     

N,N,N′,N′‐Tetraalkylaminoazoxybenzene Derivatives; Convenient Synthesis and Mechanistic Study

N,N,N′,N′‐tetraalkyaminoazoxybenzene derivatives were conveniently prepared by the coupling of N,N‐dialkylnitrosoaniline in the presence of acetone and KOH. The reaction mechanism was proposed and investigated, and the structure of compound 3b was also confirmed by single crystal X‐ray diffractometry.     

N,N,N′,N′,N″‐penta(methyl acrylate)diethylenetriamine: A novel ligand for atom transfer radical polymerization of methyl methacrylate

A novel ligand, N,N,N′,N′,N″‐penta (methyl acrylate) diethylenetriamine (MA₅‐DETA), was synthesized by the reaction of diethylenetriamine with methyl acrylate in almost quantitive yield. The polymerizations of methyl methacrylate with MA₅‐DETA as the ligand and α,α‐dichlorotoluene (DCT) and ethyl 2‐bromoisobutyrate (2‐EBiB) as the initiators, respectively, under different conditions were examined. The polymerization with CuCl/MA₅‐DETA/DCT was closely controlled in bulk and gave polymers with quite narrow molecular weight distributions (M_w/M_n's) of 1.16–1.29. The polymerization with the system CuBr/MA₅‐DETA/EBiB in bulk gave high activity. However, the system was not well controlled and gave the polymers with M_w/M_n = 1.35–1.53. The solution polymerization in anisole with CuBr/MA₅‐DETA/EBiB showed a better‐controlled nature. Moreover, the addition of CuBr₂ into the aforementioned system can further improve its controllability. The M_w/M_n's of the resulting polymers ranged from 1.11 to 1.21. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1963–1969, 2004     

Highly stable electrochromic polyamides based on N,N‐bis(4‐aminophenyl)‐N′,N′‐bis(4‐tert‐butylphenyl)‐1,4‐phenylenediamine

A new triphenylamine‐containing aromatic diamine monomer, N,N‐bis(4‐aminophenyl)‐N′,N′‐bis(4‐tert‐butylphenyl)‐1,4‐phenylenediamine, was synthesized by an established synthetic procedure from readily available reagents. A novel family of electroactive polyamides with di‐tert‐butyl‐substituted N,N,N′,N′‐tetraphenyl‐1,4‐phenylenediamine units were prepared via the phosphorylation polyamidation reactions of the newly synthesized diamine monomer with various aromatic or aliphatic dicarboxylic acids. All the polymers were amorphous with good solubility in many organic solvents, such as N‐methyl‐2‐pyrrolidinone (NMP) and N,N‐dimethylacetamide, and could be solution‐cast into tough and flexible polymer films. The polyamides derived from aromatic dicarboxylic acids had useful levels of thermal stability, with glass‐transition temperatures of 269–296 °C, 10% weight‐loss temperatures in excess of 544 °C, and char yields at 800 °C in nitrogen higher than 62%. The dilute solutions of these polyamides in NMP exhibited strong absorption bands centered at 316–342 nm and photoluminescence maxima around 362–465 nm in the violet‐blue region. The polyamides derived from aliphatic dicarboxylic acids were optically transparent in the visible region and fluoresced with a higher quantum yield compared with those derived from aromatic dicarboxylic acids. The hole‐transporting and electrochromic properties were examined by electrochemical and spectro‐electrochemical methods. Cyclic voltammograms of the polyamide films cast onto an indium‐tin oxide‐coated glass substrate exhibited two reversible oxidation redox couples at 0.57–0.60 V and 0.95–0.98 V versus Ag/AgCl in acetonitrile solution. The polyamide films revealed excellent elcterochemical and electrochromic stability, with a color change from a colorless or pale yellowish neutral form to green and blue oxidized forms at applied potentials ranging from 0.0 to 1.2 V. These anodically coloring polymeric materials showed interesting electrochromic properties, such as high coloration efficiency (CE = 216 cm²/C for the green coloring) and high contrast ratio of optical transmittance change (ΔT%) up to 64% at 424 nm and 59% at 983 nm for the green coloration, and 90% at 778 nm for the blue coloration. The electroactivity of the polymer remains intact even after cycling 500 times between its neutral and fully oxidized states. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2330–2343, 2009     

Crystallographic report: Crystal structure of bis[dipyrido[3,2,‐a:2′,3′‐c]phenazine]lead(II)diiodide

The mononuclear lead(II) complex of formula [PbI₂(DPPZ)₂] (DPPZ = dipyrido[3,2,‐a:2′,3′‐c]phenazine) has two‐fold symmetry and features a distorted octahedral geometry for lead defined by an N₄I₂ donor set. Copyright © 2004 John Wiley & Sons, Ltd.     

Accelerating effects of N‐aryl‐N′,N′‐dialkyl ureas on epoxy‐dicyandiamide curing system

This report focuses on epoxy‐dicyandiamide (DICY) curing system accelerated by N‐aryl‐N′,N′‐dialkyl urea, aiming at clarifying the accelerating mechanism and the relationship between accelerating effect and molecular structure of the accelerators. Nine N‐aryl‐N′,N′‐dialkyl ureas were synthesized and investigated with measurements of differential scanning calorimetry, thermo gravimetric/differential thermal analysis and NMR spectroscopy. The results revealed that the ureas released the corresponding secondary amines by the thermal dissociation in the presence of epoxide, which led to the formation of tertiary amines that catalyze the addition reaction of DICY to epoxide. Moreover, a tendency that the ureas able to release more compact amines exhibited higher acceleration effects was discovered. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

A New Route to N‐Aryl 2‐Alkenamides,N‐Allyl N‐Aryl 2‐Alkenamides,and N‐Aryl α,β‐Unsaturated γ‐Lactams from N‐Aryl 3‐(Phenylsulfonyl)propanamides

A series of N‐aryl 2‐alkenamides were produced efficiently by treating N‐aryl 3‐(phenylsulfonyl)‐propanamides with potassium tert‐butoxide in THF at 0°C. With out isolation, it was further treated with an additional equivalent of potassium tert‐butoxide and allyl bromide to give N‐allyl N‐aryl 2‐alkenamides in one pot in good yields. Followed by a ring‐closing metathesis reaction, these N‐allyl N‐aryl 2‐alkenamides were respectively converted into corresponding N‐aryl α,β‐unsaturated γ‐lactams in moderate yields.