Luminescence characteristics and X‐ray crystal structure of [Cd(bipy)3][PF6]2 (bipy = 2,2′‐bipyridine)

The photoluminescence characteristics of the [Cd(bipy)₃][PF₆]₂ complex are reported. A moderately large quantum yield (φ) of 1.07 × 10^?2 is exhibited in acetonitrile solution at 298 K. Crystallography shows the dication to have a distorted octahedral geometry and the crystal structure to be stabilized by C? H···π and C? H···F interactions. Copyright © 2005 John Wiley & Sons, Ltd.     

Pentamethylcyclopentadienyl(η6‐cyclooctatrienyl)ruthenium Tetrachlorozincate, [RuCp*(η6‐C8H10)]2ZnCl4

The crystal and molecular structures of the title compound, the first for a complex of the type [RuCp*(η⁶‐C₈‐ring)]⁺, is presented, the material being obtained serendipitously from a reaction between RuCl(cod)Cp* and 1‐ferrocenylbuta‐1,3‐diyne in the presence of ZnCl₂. <Ru‐C(Cp*)> (2.21 Å) is appreciably longer than in RuCp*₂ (2.18 Å) and similar to the value for the Ru‐η⁶ component (2.22 Å).     

The new polynuclear titanium(IV) complex [(Cp*TiCl)(μ‐O)2(Cp*Ti)2(μ‐O)(μ‐O)2]2Ti (Cp* is η5‐C5Me5)

A new polynuclear titanium(IV) complex, dichloro­deca‐μ₂‐oxo‐hexa­kis­(penta­methyl­cyclo­penta­dien­yl)hexa­titanium(IV), [Ti₆(C₁₀H₁₅)₆Cl₂O₁₀], has been synthesized by hydro­lysis of a titanium complex bearing an N‐(2‐hydr­oxy‐3,5‐dimethyl­benz­yl)diethano­lamine Mannich ligand. The mol­ecule has two O‐bridged Ti₃O₃ rings linked to two similar rings through a tetra­hedrally O‐coordinated Ti atom. All Ti atoms except the central one are coordinated to penta­methyl­cyclo­penta­dien­yl (Cp*) ligands. The Cp* ligands are arranged with approximate symmetry with respect to the Ti/O/Cl core.     

Synthesis,Reactivity, and Crystal Structure of the η2‐Thiocarbamoyl Palladium Complex [Pd(PPh3)2(η2‐SCNMe2)][PF6]

The η¹‐thiocarbamoyl palladium complexes [Pd(PPh₃)(η¹‐SCNMe₂)(η²‐S₂R)] (R = P(OEt)₂, 2 ; CNEt₂, 3 ) and trans‐[Pd(PPh₃)₂(η¹‐SCNMe₂)(η¹‐Spy)], 4 , (pyS: pyridine‐2‐thionate) are prepared by reacting the η²‐thiocarbamoyl palladium complex [Pd(PPh₃)₂(η²‐SCNMe₂)][PF₆], 1 with (EtO)₂PS₂NH₄, Et₂NCS₂Na, and pySK in methanol at room temperature, respectively. Treatment of 1 with dppm (dppm: bis(diphenylphosphino)methane) in dichloromethane at room temperature gives complex [Pd(PPh₃)(η¹‐SCNMe₂)(η²‐dppm)] [PF₆], 5 . All of the complexes are identified by spectroscopic methods and complex 1 is determined by single‐crystal X‐ray diffraction.     

Three ruthenocene derivatives: (η5‐4,7‐dimethylindenyl)(η5‐pentamethylcyclopentadienyl)ruthenium(II), [η5‐[2](4,7)indeno[2]paracyclophanyl](η5‐pentamethylcyclopentadienyl)ruthenium(II) and bis[η5‐[2](4,7)indeno[2]paracyclophanyl]­ruthenium(II)

In the title compounds, [Ru(C₁₀H₁₅)(C₁₁H₁₁)], (III), [Ru(C₁₀H₁₅)(C₁₉H₁₇)], (IV), and [Ru(C₁₉H₁₇)₂], (V), respectively, the coordinating ring systems are planar and parallel, with the Ru atoms lying at perpendicular distances of Ru–Cp* 1.790 (1) Å and Ru–indenyl 1.836 (1) Å in (III), Ru–Cp* 1.791 (1) Å and Ru–indenyl 1.837 (1) Å in (IV), and Ru–indenyl 1.812 (1) Å and 1.809 (1) Å in (V) (Cp* is penta­methyl­cyclo­penta­dienyl). The ring conformations are eclipsed for (III), staggered for (IV) and intermediate for (V). All three compounds show short intermolecular contacts from C—H groups to some ring centroids; these could be regarded as C—H?π hydrogen bonds. The mol­ecules of each compound are thus connected via the 2₁ screw axis to form layers parallel to the xy plane.     

Heteroleptic [n]Chromoarenophanes: ansa Complexes Derived from [Cr(η5‐C5H5)(η6‐C6H6)]

The synthesis of ansa complexes has been studied intensively owing to their importance as homogeneous catalysts and as precursors of metal‐containing polymers. However, paramagnetic non‐metallocene derivatives are rare and have been limited to examples with vanadium and titanium. Herein, we report an efficient procedure for the selective dilithiation of paramagnetic sandwich complex [Cr(η⁵‐C₅H₅)(η⁶‐C₆H₆)], which allows the preparation of a series of [n]chromoarenophanes (n=1, 2, 3) that feature silicon, germanium, and tin atoms at the bridging positions. The electronic and structural properties of these complexes were probed by X‐ray diffraction analysis, cyclic voltammetry, and by UV/Vis and EPR spectroscopy. The spectroscopic parameters for the strained and less strained complexes (i.e., with multiple‐atom linkers) indicate that the unpaired electron resides primarily in a d orbital on chromium(I); this result was also supported by density functional theory (DFT) calculations. We did not observe a correlation between the experimental UV/Vis and EPR data and the degree of molecular distortion in these ansa complexes. The treatment of tin‐bridged complex [Cr(η⁵‐C₅H₄)(η⁶‐C₆H₅)SntBu₂] with [Pt(PEt₃)₃] results in the non‐regioselective insertion of the low‐valent Pt⁰ fragment into the C_ipso? Sn bonds in both the five‐ and six‐membered rings, thereby furnishing a bimetallic complex. This observed reactivity suggests that ansa complexes of this type are promising starting materials for the synthesis of bimetallic complexes in general and also underline their potential to undergo ring‐opening processes to yield new metal‐containing polymers.     

Synthesis of 2‐Phenylthiazoles from α‐Tosyloxyketones and Thiobenzamide in [Bmim][PF6] Ionic Liquid at Ambient Temperature

The room temperature ionic liquid, 1‐n‐butyl‐3‐methylimidazolium hexafluorophosphate [bmim][PF₆] is used as a ‘green’ recyclable alternative to classical molecular solvents for the cyclocondensation of α‐tosyloxyketones with thiobenzamide to prepare 2‐phenylthiazoles in good yields.     

[μ‐1κ2O,O′:2(η5)‐Cyclopentadienylcarboxylato][2(η5)‐diphenylphosphinocyclopentadienyl]bis[1,1(η5)‐tetramethylcyclopentadienyl]iron(II)titanium(III)

Reacting stoichiometric amounts of 1‐(diphenylphosphino)ferrocene­carboxylic acid and [Ti(η⁵‐C₅HMe₄)₂(η²‐Me₃SiC[triple‐bond]CSiMe₃)] produced the title carboxyl­atotitanocene complex, [{μ‐1κ²O,O′:2(η⁵)‐C₅H₄CO₂}{2(η⁵)‐C₅H₄P(C₆H₅)₂}{1(η⁵)‐C₅H(CH₃)₄}₂Fe^IITi^III] or [FeTi(C₉H₁₃)₂(C₆H₄O₂)(C₁₇H₁₄P)]. The angle subtended by the Ti/O/O′ plane, where O and O′ are the donor atoms of the κ²‐carboxy­late group, and the plane of the carboxyl‐substituted ferrocene cyclo­penta­dienyl is 24.93 (6)°.     

Synthesis and Crystal Structures of the Molybdenum(II) Complexes with the N,N‐dimethylthiocarbamoyl Containing Ligand: Crystal Structures of β [Mo(CO)2{η2‐S2P(OEt)2}(η2‐SCNMe2)(PPh3)] and [Mo(CO)2(η3‐Tp)(η2‐SCNMe2)(PPh3)]

Reactions of the thiocarbamoyl‐molybdenum complex [Mo(CO)₂(η²‐SCNMe₂)(PPh₃)₂Cl] 1 , and ammonium diethyldithiophosphate, NH₄S₂P(OEt)₂, and potassium tris(pyrazoyl‐1‐yl)borate, KTp, in dichloromethane at room temperature yielded the seven coordinated diethyldithiophosphate thiocarbamoyl‐molybdenum complexe [Mo(CO)₂{η²‐S₂P(OEt)₂}(η²‐SCNMe₂)(PPh₃)] β‐3 , and tris(pyrazoyl‐1‐yl)borate thiocabamoyl‐molybdenum complex [Mo(CO)₂(η³‐Tp)(η²‐SCNMe₂)(PPh₃)] 4 , respectively. The geometry around the metal atom of compounds β‐3 and 4 are capped octahedrons. The α‐ and β‐isomers are defined to the dithio‐ligand and one of the carbonyl ligands in the trans position in former and two carbonyl ligands in the trans position in later. The thiocabamoyl and diethyldithiophosphate or tris(pyrazoyl‐1‐yl)borate ligands coordinate to the molybdenum metal center through the carbon and sulfur and two sulfur atoms, or three nitrogen atoms, respectively. Complexes β‐3 and 4 are characterized by X‐ray diffraction analyses.