Large Eddy Simulation of a plane impinging jet

Large Eddy Simulations of a plane turbulent impinging jet have been carried out using the dynamic Smagorinsky model. The statistical results are first validated with the measurements from the literature: mean and turbulent quantities along the jet axis and at different vertical locations are presented. This study is completed by the analysis of the wall shear stress at the impingement wall. The effect of the jet Reynolds number (3000Re13500) on the kinematic development of the jet is also discussed. To cite this article: F. Beaubert, S. Viazzo, C. R. Mecanique 330 (2002) 803–810.     

Large Eddy Simulation of the spray formation in confinements

The particle and powder properties produced within spray drying processes are influenced by various unsteady transport phenomena in the dispersed multiphase spray flow in a confined spray chamber. In this context differently scaled spray structures in a confined spray environment have been analyzed in experiments and numerical simulations. The experimental investigations have been carried out with Particle-Image-Velocimetry to determine the velocity of the gas and the discrete phase. Large-Eddy-Simulations have been set up to predict the transient behaviour of the spray process and have given more insight into the sensitivity of the spray flow structures in dependency from the spray chamber design.     

当量比对预混燃烧影响的大涡模拟研究

本文对在突扩燃烧室内甲烷和空气的预混燃烧进行了大涡模拟(LES)研究,考虑预混燃料的当量比对燃烧室提供的动力及产生的污染物的影响．利用LES计算了不同当量比条件下燃烧室内湍流预混燃烧反应流场的温度、浓度、涡量和压力分布,最后对当量比0.5时B点和C点的温度和速度进行EMD分解,得到了温度场和速度场的各阶模态的平均周期．结果表明：随着当量比从0.5增加至0.7,燃烧反应趋于剧烈,燃烧室的最高温度提高了350K,平均压力从32.876 Pa增大到34.833Pa,燃烧产生的瞬态径向最高浓度从0.5%增加到0.95%．     

Large Eddy Simulation of Flow around a Rectangular Cylinder Using the Finite Element Method

In previous papers, we proposed finite element schemes based on the Petrov-Galerkin weak formulation using exponential weighting functions for solving accurately, and in a stable manner, the flow field of an incompressible viscous fluid. In this paper, we present the Petrov-Galerkin finite element scheme for turbulent flow fields based on large eddy simulation using the standard Smagorinsky model with the Van Driest damping function. The filtered incompressible Navier-Stokes equations are numerically integrated in time by using a fractional step strategy with second-order accurate Adams-Bashforth explicit differencing for both convection an diffusion terms. In order to evaluate more accurately a mass matrix, the well-known multi-pass algorithm was also adopted in this study. Numerical results obtained are compared through flow around a rectangular cylinder at Re = 22,000 with the experimental data and other existing numerical data.     

Large eddy simulation of incompressible free round jet with discontinuous Galerkin method

In the paper, discontinuous Galerkin method is applied to simulation of incompressible free round turbulent jet using large eddy simulation with eddy viscosity approach. The solution algorithm is based on the classical projection method, but instead of the solution of the Poisson equation, a parabolic equation is advanced in pseudo‐time, which provides the pressure field ensuring the proper pressure–velocity coupling. For time and pseudo‐time integration, explicit Runge–Kutta method is employed. The computational meshes consist of hexahedral elements with flat faces. Within a given finite element, all flow variables are expressed with modal expansions of the same order (including velocity and pressure). Discretisation of the viscous terms in the Navier–Stokes equations and Laplacian in the Poisson equation is stabilised with mixed finite element approach. The correctness of the solution algorithm is verified in a commonly used test case of laminar flow in 3D lid‐driven cavity. The results of computations of the free jet are compared with experimental and numerical reference data, the latter obtained from the high‐order pseudospectral code. The statistics of centerline flow velocity – mean velocity and its fluctuations – show satisfactory agreement with the reference data. Copyright © 2015 John Wiley & Sons, Ltd.     

Large Eddy Simulation of Scalar Mixing in a Coaxial Confined Jet

The highly turbulent flow occurring inside gas-turbine combustors requires accurate simulation of scalar mixing if CFD methods are to be used with confidence in design. This has motivated the present paper, which describes the implementation of a passive scalar transport equation into an LES code, including assessment/testing of alternative discretisation schemes to avoid over/undershoots and excessive smoothing. Both second order accurate TVD and higher order accurate DRP schemes are assessed. The best performance is displayed by a DRP method, but this is only true on fine meshes; it produces similar (or larger) errors to a TVD scheme on coarser meshes, and the TVD approach has been retained for LES applications. The unsteady scalar mixing performance of the LES code is validated against published DNS data for a slightly heated channel flow. Excellent agreement between the current LES predictions and DNS data is obtained, for both velocity and scalar statistics. Finally, the developed methodology is applied to scalar transport in a confined co-axial jet mixing flow, for which experimental data are available. Agreement with statistically averaged fields for both velocity and scalar, is demonstrated to be very good, and a considerable improvement over the standard eddy viscosity RANS approach. Illustrations are presented of predicted time-resolved information e.g. time histories, and scalar pdf predictions. The LES results are shown, even using a simple Smagorinsky SGS model, to predict (correctly) lower values of the turbulent Prandtl number in the free shear regions of the flow, compared to higher values in the wall-affected regions. The ability to predict turbulent Prandtl number variations (rather than input these as in combustor RANS CFD models) is an important and promising feature of the LES approach for combustor flow simulation since it is known to be important in determining combustor exit temperature traverse.     

LDA measurements in the turbulent round jet

In the present paper, LDA was used to measure the velocity field of turbulent round air jet flows. Two cases were investigated; a jet issuing vertically upward and freely in the laboratory surrounding environment, and a jet issuing vertically upward but out of wall section setting flush horizontally at the nozzle exit. Data were collected for three exit Reynolds numbers of 1.32 × 10⁴, 2.64 × 10⁴ and 3.96 × 10⁴, which correspond to exit velocities of 10 m/s, 20 m/s and 30 m/s respectively. For each Reynolds number, profile measurements of the mean velocity, turbulence intensity, skewness and flatness factors were made at 8 downstream stations up to 30 nozzle-exit diameter. The relative influence of using a wall at the jet exit plane on the jet behavior and characteristics is the objective of the present study. The experimental results indicate that the wall, placed at the exit plane, limits the interaction of the jet flow with the surroundings, and consequently results in a reduction in the velocity spread rate, kinematic momentum flux, and kinematic mass flux. Further, the flatness and skewness factors distributions across the jet flow registered relatively higher values in the outer region of the jet when the wall was used. This indicates a more intermittent behavior of the jet flow in that region due to the existence of the wall.     

Computational modeling of turbulent mixing in a jet in crossflow

The jet in crossflow is a configuration of highest theoretical and practical importance, in which the turbulent mixing plays a major role. High-resolution measurements using Particle Image Velocimetry combined with Laser Induced Fluorescence have been conducted and used to validate simulations ranging from simple steady-state Reynolds-averaged Navier Stokes to sophisticated large-eddy simulation. The reasons for the erratic behavior of steady-state simulations in the given case, in which large-scale structures dominate the turbulent mixing, have been discussed. The analysis of intermittency proved to be an appropriate framework to account for the influence of these flow structures on the jet in crossflow, contributing to the explanation of the poor performance of the steady-state simulations.     

The development of an axisymmetric curved turbulent wall jet

An experimental study has been carried out of the low speed Coanda wall jet with both streamwise and axisymmetric curvature. A single component laser Doppler technique was used, and by taking several orientations at a given point, values of the three mean velocities and five of the six Reynolds stresses were obtained. The lateral divergence and convex streamwise curvature both enhanced the turbulence in the outer part of the jet compared with a plane two-dimensional wall jet. The inner layer exhibited a large separation of the positions of maximum velocity and zero shear stress. It was found that the streamwise mean velocity profile became established very rapidly downstream of the slot exit. The profile appeared fairly similar at later downstream positions, but the mean radial velocity and turbulence parameters showed the expected nonself preservation of the flow. Removal of the streamwise curvature resulted in a general return of the jet conditions toward those expected of a plane wall jet. The range and accuracy of the data may be used for developing turbulence models and computational techniques for this type of flow.     

The use of turbulent inflow conditions for the modelling of a high aspect ratio jet

The aim of this work is to investigate the capabilities of a turbulent inflow method. The application selected for this study is the high aspect ratio jet. The complexities associated to the numerical modelling of a high aspect ratio jet are embedded in its physical complexity. Consequently, the numerical modelling does not only require a high mesh resolution, but furthermore it requires a careful mesh construction, inflow conditions and subgrid-scale modelling to make an accurate computation of the unsteady flow phenomena. The results indicate that increased grid resolution and enhanced turbulence modelling reduce the effect of the imposed flow fluctuations. It is concluded that for a high aspect ratio free-jet turbulent inflow conditions are effective if the mesh resolution is insufficient to trigger shear-layer instabilities. Applied with sufficient mesh resolution the onset of vortex motions will occur in the shear layer, hence there is limited inflow sensitivity.     

Coupling tabulated chemistry with Large Eddy Simulation of turbulent reactive flows

A new modeling strategy is developed to introduce tabulated chemistry methods in the LES of turbulent premixed combustion. The objective is to recover the correct laminar flame propagation speed of the filtered flame front when the subgrid scale turbulence vanishes. The filtered flame structure is mapped by 1D filtered laminar premixed flames. Closure of the filtered progress variable and the energy balance equations are carefully addressed. The methodology is applied to 1D and 2D filtered laminar flames. These computations show the capability of the model to recover the laminar flame speed and the correct chemical structure when the flame wrinkling is completely resolved. The model is then extended to turbulent combustion regimes by introducing subgrid scale wrinkling effects on the flame front propagation. Finally, the LES of a 3D turbulent premixed flame is performed. To cite this article: R. Vicquelin et al., C. R. Mecanique 337 (2009).     

Numerical calculations of two-phase turbulent round jet

The investigation deals with the effect of suspended particles on the dissipation of turbulence energy.Additional dissipation is hypothesized as caused by the relative velocity between the particles and the fluid, and by structural changes of turbulence.An extended model for the turbulence energy equation is derived and applied to the case of an axially symmetrical free jet. The governing equations are solved numerically, and the results are compared with experimental data. Reasonably good agreement is obtained.     

Nanoparticle dispersion and coagulation in a turbulent round jet

Nanoparticle dispersion and coagulation behaviors in a turbulent round jet were studied in this article. An experimental system was designed to generate a uniformly distributed air–nanoparticle two-phase flow in a turbulent round jet. The particle size distribution (PSD) was measured by a scanning mobility particle sizer (SMPS) in the near field of the jet. The particle diameters were nearly constant in the potential core due to the high carrying velocity and laminar characteristic of the flow but grew larger in the region of high turbulence intensities because the vortex structures in the mixing layer promoted coagulation. Furthermore, the migration property of small-sized nanoparticles forced them to be preserved in the potential core also leading to the diameter increase. The comparison of the particle concentration distributions at different sections indicated that the shear layer is the major region for the mixing of particle-laden stream and ambient air. The particle diameters in the axial direction experienced three stages including a slightly changed stage, an increasing stage and a constant stage. The diameter increase should be attributed to turbulence coagulation.     

Conditional Moment Closure for Large Eddy Simulations

A conditional moment closure (CMC) based combustion model for large-eddy simulations (LES) of turbulent reacting flow is proposed and evaluated. Transport equations for the conditionally filtered species are derived that are consistent with the LES formulation and closures are suggested for the modelling of the conditional velocity, conditional scalar dissipation and the fluctuations around the conditional mean. A conventional β-probability density distribution of the scalar is used together with dynamic modelling for the sub-grid fluxes. The model is validated by comparison of simulations with measurements of a piloted, turbulent methane-air jet diffusion flame.     

Investigation of downstream and sideline subsonic jet noise using Large Eddy Simulation

The sound fields radiated by Mach number 0.6 and 0.9, circular jets with Reynolds numbers varying from 1.7×10³ to 4×10⁵ are investigated using Large Eddy Simulations. As the Reynolds number decreases, the properties of the sound radiation do not change significantly in the downstream direction, whereas they are modified in the sideline direction. At low Reynolds numbers, for large angles downstream from the jet axis, the acoustic levels are indeed remarkably lower and a large high-frequency part of the sound spectra vanishes. For all Reynolds numbers, the downstream and the sideline sound spectra both appear to scale in frequency with the Strouhal number. However their peak amplitudes vary following two different velocity exponents according to the radiation direction. The present observations suggest the presence of two sound sources: a Reynolds number-dependent source, predominant for large radiation angles, connected to the randomly-developing turbulence, and a deterministic source, radiating downstream, related to a mechanism intrinsic to the jet geometry, which is still to be comprehensively described. This view agrees well with the experimental results displaying two distinguishable components in turbulent mixing noise [1, 2].     

PIV measurements of a turbulent jet issuing from round sharp-edged plate

An experimental investigation is presented of a turbulent jet issuing from a round sharp-edged orifice plate (OP) into effectively unbounded surroundings. Planar measurements of velocity were conducted using Particle Image Velocimetry (PIV) in the near and transition regions. The Reynolds number, based on the jet initial diameter and velocity, is approximately 72,000. The instantaneous and mean velocities, Reynolds normal and shear stresses were obtained. The centerline velocity decay and the half-velocity radius were derived from the mean velocity. It is revealed that primary coherent structures occur in the near field of the OP jet and that they are typically distributed asymmetrically with respect to the nozzle axis. Comparison of the present PIV and previous hot-wire measurements for the OP jet suggests that high initial turbulence intensity leads to reduced rates of decay and spread of the mean flow field and moreover a lower rate of variation of the turbulence intensity. Results also show that self-similarity of the mean flow is well established from the transition region while the turbulent statistics are far from self-similar within the measured range to 16 diameters.     

Effect of different initial conditions on a turbulent round free jet

Velocity measurements were made in two jet flows, the first exiting from a smooth contraction nozzle and the second from a long pipe with a fully developed pipe flow profile. The Reynolds number, based on nozzle diameter and exit bulk velocity, was the same (䏪,000) in each flow. The smooth contraction jet flow developed much more rapidly and approached self-preservation more rapidly than the pipe jet. These differences were associated with differences in the turbulence structure in both the near and far fields between the two jets. Throughout the shear layer for x<3d, the peak in the v spectrum occurred at a lower frequency in the pipe jet than in the contraction jet. For x́d, the peaks in the two jets appeared to be nearly at the same frequency. In the pipe jet, the near-field distributions of f(r) and g(r), the longitudinal and transverse velocity correlation functions, differed significantly from the contraction jet. The integral length scale L_u was greater in the pipe jet, whereas L_v was smaller. In the far field, the distributions of f(r) and g(r) were nearly similar in the two flows. The larger initial shear layer thickness of the pipe jet produced a dimensionally lower frequency instability, resulting in longer wavelength structures, which developed and paired at larger downstream distances. The regular vortex formation and pairing were disrupted in the shear layer of the pipe jet. The streamwise vortices, which enhance entrainment and turbulent mixing, were absent in the shear layer of the pipe jet. The formation of large-scale structures should occur much farther downstream in the pipe jet than in the contraction jet.