Study of the reaction Fe(CN)5(4‐CNpy)3− + S2O82− in aqueous salt and micellar solutions

The reaction Fe(CN)₅(4‐CNpy)³⁻ + S₂O₈²⁻ (4‐CNpy=4‐cyanopyridine) was studied in aqueous salt solutions in the presence of several electrolytes as well as in anionic, cationic, and nonionic surfactant solutions. In aqueous salt solutions the noncoulombic interactions seem to be important in determining the positive salt effects observed. The salting effects are influencing the activity coefficients of any participant in the reaction, including those ion pairs which can be formed between the anionic reagents and the cations which come from the added salts. The changes in surfactant concentration in anionic and nonionic surfactant solutions do not affect the reaction rate, which is similar to that in pure water at the same ionic strength. In cationic micellar solutions an increase in the rate constant compared to that in pure water is found; the reaction rate decreasing when the surfactant concentration increases. The kinetic trends can be explained assuming that the reagents are totally bound to the micelles and, therefore, an increase in the surfactant concentration results in a decrease in the reagent concentrations at the micellar phase and thus in a decrease in the observed rate constant. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet: 31: 229–235, 1999     

Kinetics and mechanism of the interaction of nitric oxide with pentacyanoferrate(II). Formation and dissociation of [Fe(CN)5NO]3 -

The interaction of NO with [Fe(CN)(5)H(2)O](3)(-) (generated by aquation of the corresponding ammine complex) to produce [Fe(CN)(5)NO](3)(-) was studied by UV-vis spectrophotometry. The reaction product is the well characterized nitrosyl complex, described as a low-spin Fe(II) bound to the NO radical. The experiments were performed in the pH range 4-10, at different concentrations of NO, temperatures and pressures. The rate law was first-order in each of the reactants, with the specific complex-formation rate constant, k(f)( )()= 250 +/- 10 M(-)(1) s(-)(1) (25.4 degrees C, I = 0.1 M, pH 7.0), DeltaH(f)() = 70 +/- 1 kJ mol(-)(1), DeltaS(f)() = +34 +/- 4 J K(-)(1) mol(-)(1), and DeltaV(f)() = +17.4 +/- 0.3 cm(3) mol(-)(1). These values support a dissociative mechanism, with rate-controlling dissociation of coordinated water, and subsequent fast coordination of NO. The complex-formation process depends on pH, indicating that the initial product [Fe(CN)(5)NO](3)(-) is unstable, with a faster decomposition rate at lower pH. The decomposition process is associated with release of cyanide, further reaction of NO with [Fe(CN)(4)NO](2)(-), and formation of nitroprusside and other unknown products. The decomposition can be prevented by addition of free cyanide to the solutions, enabling a study of the dissociation process of NO from [Fe(CN)(5)NO](3)(-). Cyanide also acts as a scavenger for the [Fe(CN)(5)](3)(-) intermediate, giving [Fe(CN)(6)](4)(-) as a final product. From the first-order behavior, the dissociation rate constant was obtained as k(d) = (1.58 +/- 0.06) x 10(-)(5) s(-)(1) at 25.0 degrees C, I = 0.1 M, and pH 10.2. Activation parameters were found to be DeltaH(d)() = 106.4 +/- 0.8 kJ mol(-)(1), DeltaS(d)() = +20 +/- 2 J K(-)(1) mol(-)(1), and DeltaV(d)() = +7.1 +/- 0.2 cm(3) mol(-)(1), which are all in line with a dissociative mechanism. The low value of k(d) as compared to values for the release of other ligands L from [Fe(II)(CN)(5)L](n)()(-) suggests a moderate to strong sigma-pi interaction of NO with the iron(II) center. It is concluded that the release of NO from nitroprusside in biological media does not originate from [Fe(CN)(5)NO](3)(-) produced on reduction of nitroprusside but probably proceeds through the release of cyanide and further reactions of the [Fe(CN)(4)NO](2)(-) ion.     

Use of microdevices to determine the diffusion coefficient of electrochemically generated species: application to binary solvent mixtures and micellar solutions

A new approach for the determination of diffusion coefficient, D, of redox species is presented. It is based on the use of a home-constructed twin electrode within a thin-layered cell (TETLC) filled with a solution of electroactive species. Values of D are readily calculated, provided that the time required for the electrochemically generated species (produced at the generator electrode) to reach the collector electrode and the distance between both electrodes are known. Other parameters typically required to calculate D, e.g., concentration of the redox species, area of the electrode, and number of electrons transferred, are not needed. Diffusion coefficients of Fe(CN)(6)(3-), Ru(NH3)(6)(2+), and quinone were determined in water and, for Fe(CN)(6)(4-), in binary mixtures with glycerol. The results obtained were in good agreement with literature values. Aqueous glycerol solutions are microheterogeneous, as shown by the dependence on medium composition of the empirical solvent polarity scale, ET(30), determined by the solvatochromic probe RB. The responses of RB and the electrochemically generated species (Fe(CN)(6)(4-)) to the composition of aqueous glycerol mixtures were found to be remarkably similar. Measurements of D of ferrocene in micellar solutions of the cationic surfactant CTABr were also performed. Values of D for ferrocene and the ferrocenium cation are very different, in agreement with the chemical affinity of both species for the cationic micelle.     

Two-dimensional metamagnet composed of cyano-bridged CuII-WV bimetallic assembly

Two-dimensional cyanide-bridged copper(II) octacyanotungstates(V), [(Cu(3-CNpy)2(H2O))2(Cu(3-CNpy)2(H2O)2)(W(CN)8)2] (3-CNpy = 3-cyanopyridine) (1) and [(Cu(4-CNpy)2)2(Cu(4-CNpy)2(H2O)2)(W(CN)8)2] x 6H2O (4-CNpy = 4-cyanopyridine) (2), were prepared and these compounds exhibited metamagnetic behavior with Néel temperatures of 8.0 K (1) and 4.4 K (2).     

Acid-base equilibria and dynamics in sodium dodecyl sulfate micelles: geminate recombination and effect of charge stabilization

The synthetic flavylium salt 4-carboxy-7-hydroxy-4'-methoxyflavylium chloride (CHMF) exhibits two acid-base equilibria in the range of pH 1-8 in both aqueous and micellar sodium dodecyl sulfate (SDS) solutions. The values of pK(a1) and pK(a2) for the cation-zwitterion (AH(2)(+) <--> Z + H(+)) and the zwitterion-base (Z <--> A(-) + H(+)) equilibria increase from 0.73 and 4.84 in water to 2.77 and 5.64 in SDS micelles, respectively. The kinetic study of the Z <--> A(-) + H(+) ground-state reactions in SDS points to the diffusion-controlled protonation of A(-) in the aqueous phase (k(p2w) = 4.2 x 10(10) M(-)(1) s(-)(1)) and in the micelle (k(p2m) = 2.3 x 10(11) M(-)(1) s(-)(1)). The deprotonation rate of Z did not significantly change upon going from water (k(d2) = 6.3 x 10(5) s(-)(1)) to SDS (k(d2) = 5.2 x 10(5) s(-)(1)), in contrast with the behavior of ordinary cationic flavylium salts, for which k(d2) strongly decreases in SDS micelles. These results suggest that deprotonation of the zwitterionic acid is not substantially perturbed by the micellar charge. Electronic excitation of the Z form of CHMF induces fast adiabatic deprotonation of the hydroxyl group of Z() (2.9 x 10(10) s(-)(1) in water and 8.4 x 10(9) s(-)(1) in 0.1 M SDS), followed by geminate recombination on the picosecond time scale. Interestingly, while recombination in water (k(rec) = 1.7 x 10(9) s(-)(1)) occurs preferentially at the carboxylate group, at the SDS micelle surface, recombination (k(rec) = 9.2 x 10(9) s(-)(1)) occurs at the hydroxyl group. The important conclusion is that proton mobility at the SDS micelle surface is substantially reduced with respect to the mobility in water, which implies that geminate recombination should be a general phenomenon in SDS micelles.     

Influence of the addition of alcohol on the reaction methyl-4-nitrobenzenesulfonate + Br(-) in tetradecyltrimethylammonium bromide aqueous micellar solutions

The reaction methyl-4-nitrobenzenesulfonate + Br(-) was studied in tetradecyltrimethylammonium bromide (TTAB) aqueous micellar solutions in the absence and in the presence of various amounts of n-hexanol, n-pentanol, and n-butanol. Kinetic micellar effects provoked by the addition of the linear alcohols can be rationalized by using simple pseudophase kinetic models. The equilibrium binding constants of the methyl-4-nitrobenzenesulfonate molecules to the cationic micelles decreases when [alcohol] increases. The (k(2)(m)/V(m)) values found are practically the same for the different TTAB-alcohol micellar solutions studied, independent of the nature and concentration of the alcohol present in the reaction medium. This has been explained by considering the balance of two factors operating on reactivity in opposite ways: (1). an increase in the volume of the micellar interfacial region upon increasing alcohol concentration, and (2). a decrease in the polarity of the interfacial region as the amount of alcohol present in the micellar solutions increases.     

Synthesis, crystal structures, and magnetic properties of a new family of heterometallic cyanide-bridged Fe(III)2M(II)2 (M=Mn, Ni, and Co) square complexes

New heterobimetallic tetranuclear complexes of formula [Fe(III){B(pz)(4)}(CN)(2)(μ-CN)Mn(II)(bpy)(2)](2)(ClO(4))(2)·CH(3)CN (1), [Fe(III){HB(pz)(3)}(CN)(2)(μ-CN)Ni(II)(dmphen)(2)](2)(ClO(4))(2)·2CH(3)OH (2a), [Fe(III){B(pz)(4)}(CN)(2)(μ-CN)Ni(II)(dmphen)(2)](2)(ClO(4))(2)·2CH(3)OH (2b), [Fe(III){HB(pz)(3)}(CN)(2)(μ-CN)Co(II)(dmphen)(2)](2)(ClO(4))(2)·2CH(3)OH (3a), and [Fe(III){B(pz)(4)}(CN)(2)(μ-CN)Co(II)(dmphen)(2)](2)(ClO(4))(2)·2CH(3)OH (3b), [HB(pz)(3)(-) = hydrotris(1-pyrazolyl)borate, B(Pz)(4)(-) = tetrakis(1-pyrazolyl)borate, dmphen = 2,9-dimethyl-1,10-phenanthroline, bpy = 2,2'-bipyridine] have been synthesized and structurally and magnetically characterized. Complexes 1-3b have been prepared by following a rational route based on the self-assembly of the tricyanometalate precursor fac-[Fe(III)(L)(CN)(3)](-) (L = tridentate anionic ligand) and cationic preformed complexes [M(II)(L')(2)(H(2)O)(2)](2+) (L' = bidentate α-diimine type ligand), this last species having four blocked coordination sites and two labile ones located in cis positions. The structures of 1-3b consist of cationic tetranuclear Fe(III)(2)M(II)(2) square complexes [M = Mn (1), Ni (2a and 2b), Co (3a and 3b)] where corners are defined by the metal ions and the edges by the Fe-CN-M units. The charge is balanced by free perchlorate anions. The [Fe(L)(CN)(3)](-) complex in 1-3b acts as a ligand through two cyanide groups toward two divalent metal complexes. The magnetic properties of 1-3b have been investigated in the temperature range 2-300 K. A moderately strong antiferromagnetic interaction between the low-spin Fe(III) (S = 1/2) and high-spin Mn(II) (S = 5/2) ions has been found for 1 leading to an S = 4 ground state (J(1) = -6.2 and J(2) = -2.7 cm(-1)), whereas a moderately strong ferromagnetic interaction between the low-spin Fe(III) (S = 1/2) and high-spin Ni(II) (S = 1) and Co(II) (S = 3/2) ions has been found for complexes 2a-3b with S = 3 (2a and 2b) and S = 4 (3a and 3b) ground spin states [J(1) = +21.4 cm(-1) and J(2) = +19.4 cm(-1) (2a); J(1) = +17.0 cm(-1) and J(2) = +12.5 cm(-1) (2b); J(1) = +5.4 cm(-1) and J(2) = +11.1 cm(-1) (3a); J(1) = +8.1 cm(-1) and J(2) = +11.0 cm(-1) (3b)] [the exchange Hamiltonian being of the type H? = -J(S?(i)·S?(j))]. Density functional theory (DFT) calculations have been used to substantiate the nature and magnitude of the exchange magnetic coupling observed in 1-3b and also to analyze the dependence of the exchange magnetic coupling on the structural parameters of the Fe-C-N-M skeleton.     

Use of SDS micelles to stabilize a ternary intermediate in the reaction of ferrioxamine B and 1,10-phenanthroline

Spectrophotometric measurements of the reaction of ferrioxamine B (FeHDFB(+)) with 1,10-phenanthroline (phen) reveal the presence of a ternary intermediate complex in both aqueous solution and an aqueous solution of 0.16 M sodium dodecyl sulfate (SDS). The stoichiometry of the intermediate is Fe(H(2)DFB)(phen)(2+) on the basis of a Schwarzenbach analysis of spectrophotometric data obtained at variable pH and phen concentrations. The ternary complex formation constant for the reaction FeHDFB(+) + H(+) + phen right arrow over left arrow Fe(H(2)DFB)(phen)(2+) is log K = 6.96 in aqueous solution and log K = 8.64 in aqueous 0.16 M SDS. The enhanced stability of Fe(H(2)DFB)(phen)(2+) in micellar solution was analyzed in terms of the pseudophase ion-exchange (PPIE) model of micellar reactions. The association constants for the binding of each reactant to the micellar pseudophase were measured by ultrafiltration. According to PPIE model calculations, the enhanced stability of Fe(H(2)DFB)(phen)(2+) in micellar SDS arises from a proximity effect created by the high local concentrations of reactants in the micellar pseudophase. The calculations also indicate that an inhibitory medium or compartmentalization effect is operative since the observed micellar enhancement is much smaller than predicted by the PPIE model. The micellar stabilization of the Fe(H(2)DFB)(phen)(2+) intermediate and the overall conversion of FeHDFB(+) to Fe(phen)(3)(2+) are discussed as a possible model system for siderophore iron release in microbial organisms.     

mer-[Fe III(bpca)(CN)3]-: a new low-spin iron(III) complex to build heterometallic ladder-like chains

The novel mononuclear complex PPh(4)-mer-[Fe(III)(bpca)(3)(CN)(3)].H(2)O (1) [PPh(4)(+) = tetraphenylphosphonium cation and bpca = bis(2-pyridylcarbonyl)amidate anion] and ladder-like chain compound [[Fe(III)(bpca)(micro-CN)(3)Mn(II)(H(2)O)(3)] [Fe(III)(bpca)(CN)(3)]].3H(2)O (2) have been prepared and characterized by X-ray diffraction analysis. Compound 1 is a low-spin iron(III) compound with three cyanide ligands in mer arrangement and a tridentate N-donor ligand building a distorted octahedral environment around the iron atom. Compound 2 is an ionic salt made up of cationic ladder-like chains [[Fe(III)(bpca)(micro-CN)(3)Mn(II)(H(2)O)(3)]](+) and uncoordinated anions [Fe(III)(bpca)(3)(CN)(3)](-). The magnetic properties of 2 correspond to those of a ferrimagnetic chain with significant intrachain antiferromagnetic coupling between the low-spin iron(III) centers and the high-spin manganese(II) cations. This compound exhibits ferrimagnetic ordering below 2.0 K.     

UV-vis spectroscopic study of interaction of metal ions with the E(T)(30) dye involving micellar media

Interaction between 3d-transition metal ions (Mn2+, Fe2+, Fe3+, Co2+, Ni2+, Cu2+ and Zn2+) and the E(T)(30) dye, 2,6-diphenyl-4-(2,4,6-triphenyl 1-pyridino)phenolate in aqueous medium have been studied by distributing the dye between the aqueous and micellar phase formed by cationic surfactant cetyltrimethylammonium bromide(CTAB). Values of equilibrium constant K for the dye-metal ion interaction and the partition coefficient of the dye between the micellar and the aqueous phase have been determined. K values show a systematic correlation with ionic potential of metal ions.     

Mononuclear iron(III) complexes of 3N ligands in organized assemblies: spectral and redox properties and attainment of regioselective extradiol dioxygenase activity

Four octahedral iron(III) complexes of the type [Fe(L)Cl(3)], where L is a tridentate 3N ligand like N,N-bis(pyrid-2-ylmethyl)amine (bpa, L1), N,N-bis(benzimidazol-2-ylmethyl)amine (bba, L2), 1,4,7-triazacyclononane (tacn, L3) and 2,2';6',2'-terpyridine (terpy, L4), have been isolated and their catechol dioxygenase activity investigated in dichloromethane, water and different aqueous micellar media. The positions of both the catecholato-to-iron(III) LMCT bands observed for the DBC(2-) (H(2)DBC = 3,5-di-tert-butylcatechol) adducts reveal that the adducts are present as cationic [Fe(L)(DBC)(H(2)O)](+) species, which interact strongly with anionic SDS micelles and dock themselves on the anionic micellar surface, and that they exist in the aqueous phase in CTAB and TX 100 micelles. The Fe(III)/Fe(II) redox potentials of the complexes throw light on the Lewis acidity of the iron(III) center as modified by the ligand donor atoms and hence the interaction of the complexes with different micelles. The DBSQ/DBC(2-) redox potentials in SDS micellar media are more positive than those in aqueous solution confirming the presence of the aqua species [Fe(L)(DBC)(H(2)O)](+). The DBC(2-) adducts of the iron(III) complexes of bpa, bba and tacn ligands, all with facial coordination, elicit extradiol (E) cleavage to different extents while the adduct of the terpy complex with meridional coordination of the ligand shows always intradiol (I) cleavage. It is remarkable that the bpa complex shows the highest yield of extradiol product and high product selectivity in aqueous SDS solution (E, 84.0%; E/I, 61.0?:?1) and in SDS?:?n-hexane reverse micellar medium (E, 93.7%) illustrating that a vacant or solvent coordinated site is essential for observing extradiol cleavage. Interestingly, the rates of dioxygenase reactions in aqueous and aqueous micellar solutions are significantly higher than those in non-aqueous solvents. Also, they diminish in the order, SDS > TX-100 > CTAB, illustrating the facile substitution of coordinated water molecule by molecular oxygen in [Fe(L)(DBC)(H(2)O)](+) bound to anionic SDS micelles.     

Preparative and structural studies on the carbonyl cyanides of iron, manganese, and ruthenium: fundamentals relevant to the hydrogenases

The reaction of cyanide, carbon monoxide, and ferrous derivatives led to the isolation of three products, trans- and cis-[Fe(CN)(4)(CO)(2)](2)(-) and [Fe(CN)(5)(CO)](3)(-), the first two of which were characterized by single-crystal X-ray diffraction. The new compounds show self-consistent IR, (13)C NMR, and mass spectroscopic properties. The reaction of trans-[Fe(CN)(4)(CO)(2)](2)(-) with Et(4)NCN gives [Fe(CN)(5)(CO)](3)(-) via a first-order (dissociative) pathway. The corresponding cyanation of cis-[Fe(CN)(4)(CO)(2)](2)(-), which is a minor product of the Fe(II)/CN(-)/CO reaction, does not proceed at measurable rates. Methylation of [Fe(CN)(5)(CO)](3)(-) gave exclusively cis-[Fe(CN)(4)(CNMe)(CO)](2)(-), demonstrating the enhanced nucleophilicity of CN(-) trans to CN(-) vs. CN(-) trans to CO. Methylation has an electronic effect similar to that of protonation as determined electrochemically. We also characterized [M(CN)(3)(CO)(3)](n)(-) for Ru (n = 1) and Mn (n = 2) derivatives. The Ru complex, which is new, was prepared by cyanation of a [RuCl(2)(CO)(3)](2) solution.     

Kinetic Effects in non Ionic Micellar Solutions

The elimination reaction between 2-(p-nitrophenyl)ethyl bromide and OH^- ions was studied in nonionic aqueous micellar solutions of two esters of long chain fatty acids and sorbitan polyethylene glycol, Tween 20 (monolaurate) and Tween 80 (monooleate). The equilibrium binding constants of the 2-(p-nitrophenyl)ethyl bromide molecules to the nonionic micellar aggregates were obtained by spectroscopic measurements. The experimental kinetic data were quantitatively rationalized by the treatment of first-order reactions based on the pseudophase model. Results from this work and from previous studies show that, whereas the presence of cationic and sulfobetaine micelles accelerates the reaction, the presence of nonionic micelles inhibits the reaction.     

Water-N,N-dimethylformamide alkyltrimethylammonium bromide micellar solutions: thermodynamic, structural, and kinetic studies

Various amounts of N,N-dimethylformamide (DMF) with the weight percentage of DMF varying within the range 0-20, were added to aqueous micellar solutions of hexadecyl-, tetradecyl-, and dodecyltrimethylammonium bromides (CTAB, TTAB, and DTAB, respectively). Information about changes in the critical micelle concentrations, in the micellar ionization degrees, in the aggregation numbers, and in the polarity of the interfacial region of micelles upon changing the weight percent of DMF was obtained through conductivity and fluorescence measurements. Surface tension measurements permitted the estimation of the Gordon parameter of the water-DMF mixtures. The thermodynamic and structural changes provoked by the addition of DMF to the cationic micellar solutions were evidenced through the micellar kinetic effects observed in the reaction methyl 4-nitrobenzenesulfonate + Br-, investigated in the water-DMF cationic micellar solutions. The pseudophase kinetic model was adequate to quantitatively rationalize the dependence of the observed rate constant on surfactant concentration as well as on the weight percent of DMF.     

"Abnormal" salt and solvent effects on anion/cation electron-transfer reactions: an interpretation based on Marcus-Hush treatment

Salt and solvent effects on the kinetics of the reactions [Fe(CN)6]3- + [Ru(NH3)5pz](2+) right arrow over left arrow [Fe(CN)6]4- + [Ru(NH3)5pz]3+ (pz = pyrazine) have been studied through T-jump measurements. The forward and reverse reactions show different behaviors: "abnormal" salt and solvent effects in the first case and normal effects in the second one. These facts imply an asymmetric behavior of anion/cation reactions depending on the charge of the oxidant. The results can be rationalized by using the Marcus-Hush treatment for electron-transfer reactions.     

Direct oxidation of L-cysteine by [FeIII(bpy)2(CN)2]+ and [FeIII(bpy)(CN)4]-

The oxidation of L-cysteine by the outer-sphere oxidants [Fe(bpy)2(CN)2]+ and [Fe(bpy)(CN)4]- in anaerobic aqueous solution is highly susceptible to catalysis by trace amounts of copper ions. This copper catalysis is effectively inhibited with the addition of 1.0 mM dipicolinic acid for the reduction of [Fe(bpy)2(CN)2]+ and is completely suppressed with the addition of 5.0 mM EDTA (pH<9.00), 10.0 mM EDTA (9.010.0) for the reduction of [Fe(bpy)(CN)4]-. 1H NMR and UV-vis spectra show that the products of the direct (uncatalyzed) reactions are the corresponding Fe(II) complexes and, when no radical scavengers are present, L-cystine, both being formed quantitatively. The two reactions display mild kinetic inhibition by Fe(II), and the inhibition can be suppressed by the free radical scavenger PBN (N-tert-butyl-alpha-phenylnitrone). At 25 degrees C and micro=0.1 M and under conditions where inhibition by Fe(II) is insignificant, the general rate law is -d[Fe(III)]/dt=k[cysteine]tot[Fe(III)], with k={k2Ka1[H+]2+k3Ka1Ka2[H+]+k4Ka1Ka2Ka3{/}[H+]3+Ka1[H+]2+Ka1Ka2[H+]+Ka1Ka2Ka3}, where Ka1, Ka2, and Ka3 are the successive acid dissociation constants of HSCH2CH(NH3+)CO2H. For [Fe(bpy)2(CN)2]+, the kinetics over the pH range of 3-7.9 yields k2=3.4+/-0.6 M(-1) s(-1) and k3=(1.18+/-0.02)x10(6) M(-1) s(-1) (k4 is insignificant in the fitting). For [Fe(bpy)(CN)4]- over the pH range of 6.1-11.9, the rate constants are k3=(2.13+/-0.08)x10(3) M(-1) s(-1) and k4=(1.01+/-0.06)x10(4) M(-1) s(-1) (k2 is insignificant in the fitting). All three terms in the rate law are assigned to rate-limiting electron-transfer reactions in which various thiolate forms of cysteine are reactive. Applying Marcus theory, the self-exchange rate constant of the *SCH2CH(NH2)CO2-/-SCH2CH(NH2)CO2- redox couple was obtained from the oxidation of L-cysteine by [Fe(bpy)(CN)4]-, with k11=4x10(5) M(-1) s(-1). The self-exchange rate constant of the *SCH2CH(NH3+)CO2-/-SCH2CH(NH3+)CO2- redox couple was similarly obtained from the rates with both Fe(III) oxidants, a value of 6x10(6) M(-1) s(-1) for k11 being derived. Both self-exchange rate constants are quite large as is to be expected from the minimal rearrangement that follows conversion of a thiolate to a thiyl radical, and the somewhat lower self-exchange rate constant for the dianionic form of cysteine is ascribed to electrostatic repulsion.     

Conductometric, surface tension, and kinetic studies in mixed SDS-Tween 20 and SDS-SB3-12 micellar solutions

Micellization in sodium dodecyl sulfate (SDS)-N-dodecyl-N,N-dimethyl-3-ammonio-1-propanesulfonate and SDS-polyoxyethylenesorbitan monolaurate binary surfactant solutions was studied by means of conductivity and surface tension measurements. These studies showed that two types of micellar aggregates are present in the mixed micellar solutions. Two reactions were investigated in these micellar media, the oxidation of 1-methoxy-4-(methylthio)benzene by IO(4)(-) and the spontaneous hydrolysis of phenyl chloroformate. Information on the distribution of reagents in the micellar reaction media was obtained through conductivity and spectroscopic measurements. Discussion of the kinetic data showed that the redox reaction takes place mainly in the aqueous phase of the mixed solutions, whereas hydrolysis occurs in the aqueous as well as in the micellar pseudophase. Variations in the observed rate constants of the two processes studied are gradual within the whole surfactant concentration range investigated, revealing little information about the mixed micellar medium.     

High-nuclearity metal-cyanide clusters: synthesis,magnetic properties,and inclusion behavior of open-cage species incorporating [(tach)M(CN)3] (M = Cr,Fe, Co) complexes

The use of 1,3,5-triaminocyclohexane (tach) as a capping ligand in generating metal-cyanide cage clusters with accessible cavities is demonstrated. The precursor complexes [(tach)M(CN)(3)] (M = Cr, Fe, Co) are synthesized by methods similar to those employed in preparing the analogous 1,4,7-triazacyclononane (tacn) complexes. Along with [(tach)Fe(CN)(3)](1)(-), the latter two species are found to adopt low-spin electron configurations. Assembly reactions between [(tach)M(CN)(3)] (M = Fe, Co) and [M'(H(2)O)(6)](2+) (M' = Ni, Co) in aqueous solution afford the clusters [(tach)(4)(H(2)O)(12)Ni(4)Co(4)(CN)(12)](8+), [(tach)(4)(H(2)O)(12)Co(8)(CN)(12)](8+), and [(tach)(4)(H(2)O)(12)Ni(4)Fe(4)(CN)(12)](8+), each possessing a cubic arrangement of eight metal ions linked through edge-spanning cyanide bridges. This geometry is stabilized by hydrogen-bonding interactions between tach and water ligands through an intervening solvate water molecule or bromide counteranion. The magnetic behavior of the Ni(4)Fe(4) cluster indicates weak ferromagnetic coupling (J = 5.5 cm(-)(1)) between the Ni(II) and Fe(III) centers, leading to an S = 6 ground state. Solutions containing [(tach)Fe(CN)(3)] and a large excess of [Ni(H(2)O)(6)](2+) instead yield a trigonal pyramidal [(tach)(H(2)O)(15)Ni(3)Fe(CN)(3)](6+) cluster, in which even weaker ferromagnetic coupling (J = 1.2 cm(-)(1)) gives rise to an S = (7)/(2) ground state. Paralleling reactions previously performed with [(Me(3)tacn)Cr(CN)(3)], [(tach)Cr(CN)(3)] reacts with [Ni(H(2)O)(6)](2+) in aqueous solution to produce [(tach)(8)Cr(8)Ni(6)(CN)(24)](12+), featuring a structure based on a cube of Cr(III) ions with each face centered by a square planar [Ni(CN)(4)](2)(-) unit. The metal-cyanide cage differs somewhat from that of the analogous Me(3)tacn-ligated cluster, however, in that it is distorted via compression along a body diagonal of the cube. Additionally, the compact tach capping ligands do not hinder access to the sizable interior cavity of the molecule, permitting host-guest chemistry. Mass spectrometry experiments indicate a 1:1 association of the intact cluster with tetrahydrofuran (THF) in aqueous solution, and a crystal structure shows the THF molecule to be suspended in the middle of the cluster cavity. Addition of THF to an aqueous solution containing [(tach)Co(CN)(3)] and [Cu(H(2)O)(6)](2+) templates the formation of a closely related cluster, [(tach)(8)(H(2)O)(6)Cu(6)Co(8)(CN)(24) superset THF](12+), in which paramagnetic Cu(II) ions with square pyramidal coordination are situated on the face-centering sites. Reactions intended to produce the cubic [(tach)(4)(H(2)O)(12)Co(8)(CN)(12)](8+) cluster frequently led to an isomeric two-dimensional framework, [(tach)(H(2)O)(3)Co(2)(CN)(3)](2+), exhibiting mer rather than fac stereochemistry at the [Co(H(2)O)(3)](2+) subunits. Attempts to assemble larger edge-bridged cubic clusters by reacting [(tach)Cr(CN)(3)] with [Ni(cyclam)](2+) (cyclam = 1,4,8,11-tetraazacyclotetradecane) complexes instead generated extended one- or two-dimensional solids. The magnetic properties of one of these solids, two-dimensional [(tach)(2)(cyclam)(3)Ni(3)Cr(2)(CN)(6)]I(2), suggest metamagnetic behavior, with ferromagnetic intralayer coupling and weak antiferromagnetic interactions between layers.     

Kinetic and rheological measurements of the effects of inert 2-, 3- and 4-bromobenzoate ions on the cationic micellar-mediated rate of piperidinolysis of ionized phenyl salicylate

The effects of the concentration of inert organic salts, [MX], (MX=2-, 3- and 4-BrBzNa with BrBzNa=BrC(6)H(4)CO(2)Na) on the rate of piperidinolysis of ionized phenyl salicylate (PS(-)) have been rationalized in terms of pseudophase micellar (PM) coupled with an empirical equation. The appearance of induction concentration in the plots of k(obs) versus [MX] (where k(obs) is pseudo-first-order rate constants for the reaction of piperidine (Pip) with PS(-)) is attributed to the occurrence of two or more than two independent ion exchange processes between different counterions at the cationic micellar surface. The derived kinetic equation, in terms of PM model coupled with an empirical equation, gives empirical parameters F(X/S) and K(X/S) whose magnitudes lead to the calculation of usual ion exchange constant K(X)(Br) (=K(X)/K(Br) with K(X) and K(Br) representing cationic micellar binding constants of counterions X(-) and Br(-), respectively). The value of F(X/S) measures the fraction of S(-) (=PS(-)) ions transferred from the cationic micellar pseudophase to the aqueous phase by the optimum value of [MX] due to ion exchange X(-)/S(-). Similarly, the value of K(X/S) measures the ability of X(-) ions to expel S(-) ions from cationic micellar pseudophase to aqueous phase through ion exchange X(-)/S(-). This rather new technique gives the respective values of K(X)(Br) as 8.8±0.3, 71±6 and 62±5 for X(-)=2-, 3- and 4-BrBz(-). Rheological measurements reveal the shear thinning behavior of all the surfactant solutions at 15mM CTABr (cetyltrimethylammonium bromide) indicating indirectly the presence of rodlike micelles. The plots of shear viscosity (η) at a constant shear rate (γ), i.e. η(γ), versus [MX] at 15 mM CTABr exhibit maxima for MX=3-BrBzNa and 4-BrBzNa while for MX=2-BrBzNa, the viscosity maximum appears to be missing. Such viscosity maxima are generally formed in surfactant solutions containing long stiff and flexible rodlike micelles with entangled and branched/multiconnected networks. Thus, 15 mM CTABr solutions at different [MX] contain long stiff and flexible rodlike micelles for MX=3- and 4-BrBzNa and short rodlike micelles for MX=2-BrBzNa.