Studies of the spin-Hamiltonian parameters, d–d transitions and defect structures for two tetragonal Cu centers in Ba2ZnF6:Cu crystal

Two theoretical methods, the perturbation theory method (PTM) and the complete diagonalization (of energy matrix) method (CDM), are applied to calculate the spin-Hamiltonian parameters (g-factors g, g and hyperfine structure constants A, A, obtained from electron paramagnetic resonance (EPR) spectra) and d–d transitions (obtained from optical spectra) for two tetragonal Cu²⁺ centers in Ba₂ZnF₆:Cu²⁺ crystals. The Cu²⁺(I) ion replaces the Zn²⁺ ion at tetragonally compressed octahedral coordination and has the ground state ²A₁(|d_z²), whereas the Cu²⁺(II) ion is at an interstitial site with a square-planar F⁻coordination and has the ground state ²B₂(|d_x²-y²). The calculated spin-Hamiltonian parameters and d–d transitions from the PTM and CDM coincide and are in reasonable agreement with the experimental values. This suggests that both methods are effective for the theoretical studies of EPR and optical spectral data for 3d⁹ ions in tetragonal symmetry with different ground states. The defect structures of the two Cu²⁺ centers in Ba₂ZnF₆:Cu²⁺ are also estimated.     

Anisotropic magnetotransport near the quantum Hall state

We report experimental results on an anisotropic magnetotransport of a bilayer electron system at the Landau level filling factor under tilted magnetic fields. We find that the magnetoresistance changes when the direction of applied in-plane field B is changed with respect to the direction of the current while keeping the strength of B fixed. This anisotropy only appears at the ground state where interlayer electron tunneling is permitted. Therefore, this phenomenon indicates that bilayer systems at with interlayer tunneling inherently have a dissipation mechanism related to the direction of the in-plane field.     

1.3 μm range effectively cylindrical In0.53Ga0.47As/In0.52Al0.48As quantum wires grown on (2 2 1)A InP substrates by molecular beam epitaxy

Vertically coupled quantum wires (QWRs) have been made by alternately stacking nominally 3.6 nm thick In_0.53Ga_0.47As self-organized QWR layers and 1 nm thick In_0.52Al_0.48As barrier layers on (2 2 1)A-oriented InP substrates by molecular beam epitaxy. The surface of In_0.53Ga_0.47As QWR layers was corrugated at an amplitude of 1.1 nm and period of 27 nm, and lateral confinement potential is induced by their thickness modulation. The wavelength of photoluminescence (PL) from the stacked QWRs at 15 K becomes longer from 1220 to 1327 nm with increasing total number of stacked QWR layers, N_SL, from 1 to 9, while PL full-width at half-maximum is reduced from 22 to 8.6 meV. The PL intensity with the polarization parallel to the wire direction, I, is 1.30 times larger than that with the normal polarization, I, when N_SL=1. The PL intensity ratio, I/I, reaches as large as 4 when N_SL=9, indicating successful control of relative strength between vertical confinement and lateral confinement of carriers. The value of I/I obtained for the stacked QWRs with N_SL=9 is the same value as cylindrical QWRs have. The results indicate that effectively cylindrical QWRs with the best uniformity and 1.3 μm range emission were realized by stacking of self-organized QWR layers.     

Dielectric/piezoelectric properties and temperature dependence of domain structure evolution in lead free single crystal

(K_0.5Na_0.5)NbO₃ (KNN) single crystals were grown using a high temperature flux method. The dielectric permittivity was measured as a function of temperature for [001]-oriented KNN single crystals. The ferroelectric phase transition temperatures, including the rhombohedral–orthorhombic T_R−O, orthorhombic–tetragonal T_O−T and tetragonal–cubic T_C were found to be located at −149  C, 205 C and 393 C, respectively. The domain structure evolution with an increasing temperature in [001]-oriented KNN single crystal was observed using polarized light microscopy (PLM), where three distinguished changes of the domain structures were found to occur at −150  C, 213 C and 400 C, corresponding to the three phase transition temperatures.     

Magnetotunneling spectroscopy of ring-shaped (InGa)As quantum dots: Evidence of excited states with 2pz character

We study the effect of a high magnetic field (B) on the current–voltage characteristics, I(V), of a GaAs/(AlGa)As resonant tunneling diode incorporating a layer of ring-shaped quantum dots (QDs) in the quantum well (QW). The dots give rise to a series of four unusual resonances in I(V) which show a high degree of reproducibility across the epitaxial wafer. By combining data for B parallel and perpendicular to the growth axis z, we identify that the unusual resonances arise from resonant tunneling into QD excited states with 2p_z-like symmetry. The two series of magneto-oscillations in I for Bz allow us to determine the resonant charging and discharging of the QW with varying bias.     

A rapid measurement of : The DECPMG sequence

The Driven-Equilibrium Carr–Purcell Meiboom–Gill (DECPMG) pulse sequence is a rapid method for obtaining the average ratio of longitudinal to transverse relaxation times T₁/T₂ as a function of T₂. Since this is a one-dimensional experiment, the T₁/T_2T2 ratio can be acquired, potentially, in just two scans; the second scan being a reference CPMG measurement. Conventionally, T₁/T₂ is determined from a two-dimensional T₁-T₂ relaxation correlation experiment. The method described here offers a significant reduction in experimental time without a reduction in signal-to-noise. The T₁/T₂ ratio is useful for comparing the behaviour of liquids in porous media. Here we demonstrate the application of the DECPMG sequence to the study of oil-bearing rocks by differentiating oil or water saturated rock cores, and by observing the relative strengths of surface interaction for water in two types of rock by measuring T₁/T₂ as a function of magnetic field strength.     

Electron drag in intermediate magnetic fields with low electron density

Electron drag between two two-dimensional electron systems has been measured in intermediate magnetic fields (/τ<ω_ck_BT) with a relatively low electron density. We explore, in this sample, the unusual increase of drag in intermediate magnetic fields which was well characterized by a nearly temperature independent B³ dependence. The anomalous behavior of electron drag observed in higher density samples is found to persist for low sample density.     

Nonlinear diffusion and particle production in relativistic systems

The short parton production phase in high-energy heavy-ion collisions is treated analytically as a nonlinear diffusion process. The initial buildup of the rapidity density distributions of produced charged hadrons within τ_p0.25 fm/c occurs in three sources during the colored partonic phase. In a two-step approach, the subsequent diffusion in pseudorapidity space during the interaction time of τ_int7–10 fm/c (mean duration of the collision) is essentially linear as expressed in the Relativistic Diffusion Model (RDM) which yields excellent agreement with the data at RHIC energies, and allows for predictions at LHC energies. Results for d+Au are discussed in detail.     

Wavelength and temperature dependence properties of human blood-serum

For biological importance and general scientific interest, the present paper studies the physical properties dependent on wavelength and temperature, for six different samples of human blood-serum, at two different laser wavelengths (514.5 and 632.8 nm). The properties are described in terms of scalar quantities, viz. refractive index or optical permittivity, optical and dielectric dispersion. A modified and high accurate laser Mach–Zehnder interferometric technique is used for measurement of the refractive index (n) and its gradient with temperature (dn/dT). The values of n and dn/dT are applied to calculate the optical permittivity () and its gradient with temperature d/dT. The refractive properties such as the variation of n, , −dn/dT and, −d/dT as a functions of wavelengths are determined. On the other hand, the optical properties such as reflectance, transmittance and absorptance as a function of light incident angle, temperature and wavelength are studied. Additionally the following dielectric parameters are calculated: specific refractivity, specific dispersivity, polarizability per unit volume, wave impedance, volume expansion coefficient and the electric susceptibility.     

Surface morphology and composition of c-, a- and m-sapphire surfaces in O2 and H2 environments

This paper reports that monitoring the composition of the c(0 0 0 1), a(11–20) and m(10–10) sapphire surfaces is essential for a proper interpretation of the surface morphologies obtained after annealing at 1253 and 1473 K in ArH₂ or ArO₂ atmospheres. Our experimental investigations, which have used Auger electron spectroscopy (AES) and atomic force microscopy (AFM) on the surfaces of 99.99% pure sapphire wafers, have led to the following original conclusions: (i) Calcium segregates at the c-surface of sapphire both under ArO₂ and ArH₂. (ii) Potassium adsorption enhances the kinetics of step-bunching on the c-surface under ArO₂. (iii) The step edges on the a-surface may develop a comb-like morphology made of parallel strips along the [10–10] direction. (iv) At 1253 K, clean m-surfaces may be stable. (v) Under ArH₂, alumina surface diffusion is much slower than under ArO₂ for all surface orientations, the surface concentration of impurities is low, and the Al–O ratio of the AES signals at the surface is significantly larger.     

Far-field properties and beam quality of vectorial Hermite–Laguerre–Gaussian beams beyond the paraxial approximation

The far-field properties and beam quality of vectorial nonparaxial Hermite–Laguerre–Gaussian (HLG) beams are studied in detail, where, instead of the second-order-moments-based M² factor, the extended power in the bucket (PIB) and βparameter are used to characterize the beam quality in the far field and the intensity in the formulae is replaced by the z component of the time-averaged Poynting vector S_z. It is found that the S_z PIB and βparameter of vectorial nonparaxial HLG beams depend on the mode indices n, m, αparameter and waist-width-to-wavelength ratio w₀/λ and the PIB and βparameter are additionally dependent on the bucket's size taken.     

Effective spin susceptibility, electron mass and Landé factor in two-dimensional (2D) Si inversion layers

We have studied the silicon (Si) band-structure, electron–electron and electron-ionized donor interaction effects on our accurate and approximate results (AcR and ApR) for renormalized effective spin susceptibitity (RESS), electron mass (EEM), Landé factor and spin polarization in the impure 2D Si (electron system), showing that:(i) our ApR, being strongly deviated from our AcR, reproduces approximately all the data obtained recently by Pudalov et al. (Phys. Rev. Lett. 88 (2002) 196404) [in particular, RESS =4.7 at the critical value of Wigner–Seitz radius r_s: r_s=r_c≈8.5 at which occur the “apparent” metal–insulator transition (MIT)] and can also be compared with other ApRs found in the recent literature,(ii) both the RESS and EEM produce physical singularities at the same critical value: r_s=r_c11.05661 (weakly disordered samples) at which occurs the “true” MIT; the existence of such two “apparent and true” critical values in this impure system agrees with a recent discussion by Abrahams et al. (Rev. Mod. Phys. 73 (2001) 251), and(iii) at r_s=r_c=8.5, at which occurs the “apparent” MIT, our AcR for effective spin polarization and the corresponding result, obtained using a disordered Hubbard model and a determinant quantum Monte Carlo method by Denteneer and Scalettar (Phys. Rev. Lett. 90 (2003) 246401), both give the same result: ξ_eff.=ξ_c0.31 at B0.4 T, which is found to be lower than the critical parallel magnetic field for full spin polarization, B_c=1.29 T, supporting thus the existence of such an “apparent” MIT.     

Interband absorption and luminescence in small quantum dots under strong magnetic fields

Interband absorption and luminescence of quasi-two-dimensional, circularly symmetric, N_e-electron quantum dots are studied at high magnetic fields, 8B60 T, and low temperatures, T2 K. In the N_e=0 and 1 dots, the initial and final states of such processes are fixed, and thus the dependence on B of peak intensities is monotonic. For larger systems, ground state rearrangements with varying magnetic field lead to substantial modifications of the absorption and luminescence spectra. Collective effects are seen in the N_e=2 and 3 dots at “filling fractions” and .     

Investigation of the local structure and the effects of the orbit reduction factor on the EPR g-factors for octahedral (CrO6) cluster in TiO2:Cr and MgO:Cr systems

A theoretical method for studying the inter-relation between electronic and molecular structure has been proposed based on the complete energy matrices for a d³ configuration ion in a tetragonal ligand-field. By means of this method, the local structure for Cr³⁺ ion doped in oxides TiO₂ (anatase) and MgO has been determined. The calculated results indicate that the local structure of the (CrO₆)⁹⁻ cluster in TiO₂:Cr³⁺ and MgO:Cr³⁺ systems exists as a compressed distortion relative to the regular octahedron. Meanwhile, the dependence of the EPR zero-field splitting parameter D on the local structure parameter ΔR (ΔR=R₁−R₂) has been revealed. In addition, the relation between the EPR g-factors (g,g,Δg) and the orbit reduction factor k has been discussed for the two systems, suggesting that the orbit reduction factor k is very important to understand the EPR g-factors.     

Scanning tunneling microscopy/spectroscopy on multi-layered cuprate superconductor Ba2Ca5Cu6O12 (O1−x Fx)2

Scanning tunneling microscopy/spectroscopy (STM/STS) measurements on multi-layered cuprate superconductor Ba₂Ca₅Cu₆O₁₂ (O_1−x F_x)₂ are carried out. STM topographies show randomly distributed bright spot structures with a typical spot size of 0.8 nm. These bright spots are occupied about 28% per one unit cell of c-plane, which is comparable to the regular amount of apical oxygen of 20% obtained from element analysis. Tunneling spectra simultaneously show both the small and the large gap structures. These gap sizes at 4.9 K are about Δ 15 meV and 90 meV, respectively. The small gap structure disappears at the temperature close to T_C, while the large gap persists up to 200 K. Therefore, these features correspond to the superconducting gap and pseudogap, respectively. These facts give evidence for some ordered state with large energy scale even in the superconducting state. For the superconducting gap, the ratio of 2Δ/K_BT_C = 4.9 is obtained with T_C = 70 K, which is determined from temperature dependence of the tunneling spectra.     

The extraction of total cross section from

We report on the first measurement of the differential cross section of -meson photoproduction for the d(γ,pK⁺K⁻)n exclusive reaction channel. The experiment was performed using a tagged-photon beam and the CEBAF Large Acceptance Spectrometer (CLAS) at Jefferson Lab. A combined analysis using data from the d(γ,pK⁺K⁻)n channel and those from a previous publication on coherent production on the deuteron has been carried out to extract the −N total cross section, σ_N. The extracted −N total cross section favors a value above 20 mb. This value is larger than the value extracted using vector-meson dominance models for photoproduction on the proton.     

Modified Kolmogorov wave turbulence in QCD matched onto “Bottom-up” thermalization

We investigate modification of Kolmogorov wave turbulence in QCD calculating gluon spectra as functions of time in the presence of a low energy source which feeds in energy density in the infrared region at a time-dependent rate. Then considering the picture of saturation constraints as has been constructed in the “bottom-up” thermalization approach we revisit that picture for RHIC center-mass energy, W=130 GeV, and also extend it to LHC center-mass energy, W=5500 GeV, thus for two cases having an opportunity to calculate the equilibration time, τ_eq|therm, of the gluon system produced in a central heavy ion collision at mid-rapidity region. Thereby, at RHIC and LHC energies we can match the equilibration time, obtained from the late stage gluon spectrum of the modified Kolmogorov wave turbulence, onto that of the “bottom-up” thermalization and other evolutional approaches as well. In addition, from the revised “bottom-up” approach we find the gluon liberation coefficient to be on the average, ε0.81–1.06 at RHIC and ε0.50–0.56 at LHC. We also present other phenomenological estimates of τ_therm which, at QCD realistic couplings, yield 0.45–0.65 fmτ_therm0.97–2.72 fm at RHIC and 0.31–0.40 fmτ_therm0.86–2.04 fm at LHC. We show that the second upper-bounds of τ_therm in both cases are due to the late stage gluon spectrum of the original Kolmogorov wave turbulence in QCD, previously deduced with a low energy source which feeds in energy density at a constant rate. On the other hand, the lower-bounds and first upper-bounds of τ_therm are due to the late stage gluon spectrum of the modified QCD wave turbulence, deduced here at the specific time-dependent rate. In the latter case, at certain conditions, taking also into account both very small and realistic couplings we give estimates: 0.65 fmτ_therm1.29 fm at RHIC and 0.52 fmτ_therm1.16 fm at LHC, as well as at realistic couplings we find 0.53<τ_therm<0.7 fm at RHIC and 0.41<τ_therm<0.65 fm at LHC.     

Asymmetric di-jet production in polarized hadronic collisions

Using the collinear QCD factorization approach, we study the single-transverse-spin dependent cross section Δσ(S) for the hadronic production of two jets of momenta P₁=P+q/2 and P₂=−P+q/2. We consider the kinematic region where the transverse components of the momentum vectors satisfy PqΛ_QCD. For the case of initial-state gluon radiation, we show that at the leading power in q/P and at the lowest non-trivial perturbative order, the dependence of Δσ(S) on q decouples from that on P, so that the cross section can be factorized into a hard part that is a function only of the single scale P, and into perturbatively generated transverse-momentum dependent (TMD) parton distributions with transverse momenta .     

Velocity of electroweak bubble walls

We study the velocity of bubble walls in the electroweak phase transition. For several extensions of the Standard Model, we estimate the friction and calculate the wall velocity, taking into account the hydrodynamics. We find that deflagrations are generally more likely than detonations. Nevertheless, for models with extra bosons, which give a strongly first-order phase transition, the deflagration velocity is in general quite high, 0.1v_w0.6. Therefore, such phase transitions may produce an important signal of gravitational waves. On the other hand, models with extra fermions which are strongly coupled to the Higgs boson may provide a strongly first-order phase transition and small velocities, 10⁻²v_w10⁻¹, as required by electroweak baryogenesis.     

Thermodynamics of charged Brans–Dicke AdS black holes

It is well known that in four dimensions, black hole solution of the Brans–Dicke–Maxwell equations is just the Reissner–Nordstrom solution with a constant scalar field. However, in n4 dimensions, the solution is not yet the (n+1)-dimensional Reissner–Nordstrom solution and the scalar field is not a constant in general. In this Letter, by applying a conformal transformation to the dilaton gravity theory, we derive a class of black hole solutions in (n+1)-dimensional (n4) Brans–Dicke–Maxwell theory in the background of anti-de Sitter universe. We obtain the conserved and thermodynamic quantities through the use of the Euclidean action method. We find a Smarr-type formula and perform a stability analysis in the canonical ensemble. We find that the solution is thermally stable for small α, while for large α the system has an unstable phase, where α is a coupling constant between the scalar and matter field.