Liquid-phase isobutane alkylation with butenes over aluminum chloride complexes synthesized in situ from activated aluminum and <Emphasis Type="Italic">tert</Emphasis>-butyl chloride

The liquid-phase interaction between isobutane and butenes at 303 K and 2.5–3.0 MPa has been investigated using activated aluminum (Al*)-tert-butyl chloride (TBC) model system (TBC: Al* = 0.35−4 mol/mol). It has been demonstrated by attenuated total reflection FT-IR (ATR-FT-IR) spectroscopy that the catalytically active aluminum chloride complexes forming in situ in the hydrocarbon medium vary in composition. Alkylation as such takes place at equimolar proportions of the reactants (TBC: Al* = 1: 1) and butenes feed 1mass flow rate of 5 h⁻¹ per gram of Al*. According to ATR-FT-IR data, the most abundant aluminum complexes resulting under these conditions are the AlCl₄⁻ and Al₂Cl₇⁻ ions and, probably, the molecular complex AlCl₃ · sec-C₄H₉Cl. In a fourfold excess of TBC over Al* at butenes mass feed rate of 2.5 h⁻¹, isobutane undergoes self-alkylation. In this case, the Al₂Cl₇⁻ ion is not detected and the most abundant complexes are AlCl₄⁻, Al₃Cl₁₀⁻ and the molecular species AlCl₃ · tert-C₄H₉Cl. It is hypothesized that the Al₂Cl₇⁻ ion plays the key role in the liquid-phase alkylation of isobutane with butenes.     

In Situ Formation of Al(Fe)/Cl Metal Chloride Complexes and Evaluation of Their Catalytic Properties in the Reaction of Ethylene Oligomerization

According to FT-IR and UV spectroscopic data, the interaction of the Al/Fe alloy with tert-butyl chloride results in that AlCl₄^–, Al₂Cl₇^–, and FeCl₂⁺ ion complexes, Fe³⁺ ions, and AlCl₃ molecular form are produced in situ in the reaction medium. Ethylene was oligomerized in n-hexane on metal chloride complexes produced in situ from Al/Fe alloys and tert-butyl chloride.     

Kinetics of radical decomposition of di(tert-butyl) trioxide

The kinetics of radical decomposition of di(tert-butyl) trioxide was studied by spectrophotometry from the consumption of an acceptor of free radicals, 2,6-di(tert-butyl)-4-methylphenol, in CFCl₃ and CH₂Cl₂ (in the latter case, in the presence of 0.1M Bu^tOOH). The activation parameters of the reaction (log(A/s ⁻¹)=14.8±1.2 and 14.1±1.6,E _a=21.6±1.4 and 20.1±1.9 kcal mol⁻¹ in CFCl₃ and CH₂Cl₂, respectively) and the probability of radical escape to the bulk (e=0.9±0.1) were determined. The known experimental and calculated values of the O−OO bond strength in trioxides were analyzed. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 61–65, January, 1999.     

Phase transition and thermal decomposition of [Al(DMSO)<Subscript>6</Subscript>]Cl<Subscript>3</Subscript>

Phase transition and thermal decomposition of hexadimethylsulfoxidealuminium chloride were studied by differential scanning calorimetry (DSC), thermogravimetry (TG) and simultaneous differential thermal analysis (SDTA). The gaseous products of the decomposition were on-line identified by a quadrupole mass spectrometer (QMS). In the temperature range of 95–300 K, [Al(DMSO)₆]Cl₃ indicates one phase transition at T _c^h=244.96 K (on heating) and at T _c^c=220.87 K (on cooling). Large thermal hysteresis of the phase transition (∼24 K) indicates its first order character. Large value of transition entropy (ΔS≈40 J mol⁻¹ K⁻¹) suggests its configurational character. Thermal decomposition of the title compound proceeds in four main stages. In the first stage, which starts just above ca. 300 K, the compound loses two DMSO molecules per one formula unit and undergoes into [Al(DMSO)₄]Cl₃. In the second stage, the next three DMSO ligands are released and simultaneously decomposed. The third stage, which continues up to ca. 552 K, is connected with a loss of the last DMSO ligand and the formation of AlCl₃. In the fourth stage AlCl₃ reacts with carbon monoxide that originates from the decomposition of DMSO, and first aluminium oxychloride and next solid Al₂O₃ plus carbon are created.     

1H NMR spectroscopic study of theert-butyl chloride—aluminum bromide cationic initiating system

The interaction oftert-butyl chloride with aluminum bromide in methylene dibromide at −30°C leads to the formation of two types of adducts, which give signals with δ 2.4 and 3.2 in the¹H NMR spectra in addition to that of free alkyl halide. these signals are attributed to a polarized complex (PC) and ion pair (IP), respectively. An excess of AlBr₃ shifts the equilibria toward IP. The latter contains more AlBr₃ than the polarized complex. Based on the spectral data, we calculated the limiting values of some equilibrium constants. The ability of AlBr₃ to solvate counterions is consistent with the results of isobutylene polymerization under the action of the initiating Bu^tCl−AlBr₃ system at different ratios of the starting concentrations [AlBr₃]₀/[Bu^tCl]₀. An increase in this ratio results in both the acceleration of polymerization and an increase in the relative role of chain transfer reactions. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2217–2222, November, 1998.     

Pulse radiolysis study of I− oxidation with radical anions Cl2 ⋅− in an aqueous solution

Radiation-chemical transformations of chloride solutions in the presence of iodide additives were studied by pulse radiolysis. Radical anion Cl₂ ^⋅− oxidize I⁻ ion, while in the secondary reactions Cl₂ reacts with I⁻ to form a mixed trihalide ion ICl₂ ⁻. A reaction model that satisfactorily describes the experimental data was proposed. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1336–1340, June, 2005.     

Aluminum complexes with mono-and dianionic diimine ligands

The metathesis reaction of the magnesium complex [(dpp-BIAN)²⁻Mg²⁺(THF)₃] (dpp-BIAN is 1,2-bis[(2,6-diisopropylphenyl)imino]acenaphthene) with one equivalent of AlCl₃ in toluene gave the [(dpp-BIAN)²⁻AlCl₂]⁻[Mg₂Cl₃(THF)₆]⁺ complex (1). Reduction of dpp-BIAN with aluminum metal in the presence of AlCl₃ and AlI₃ in toluene and diethyl ether afforded the radical-anionic complex [(dpp-BIAN)⁻AlCl²] (2) and the dianionic complexes [(dpp-BIAN)²⁻AlI(Et₂O)] (3) and [(dpp-BIAN)²⁻AlCl(Et₂O)] (4), respectively. Compounds 1–4 were isolated in the crystalline state and characterized by IR spectroscopy and elemental analysis. The structures of compounds 1–3 were established by X-ray diffraction. Compound 2 was characterized by ESR spectroscopy. Compounds 3 and 4 were studied by 1H and 13C NMR spectroscopy. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 409–415, March, 2006.     

Effect of cationic gemini surfactants on the hydrolysis of carboxylate and phosphate esters using hydroxamate ions

The kinetics of the hydrolysis of p-nitrophenyl acetate (PNPA) and p-nitrophenyl diphenyl phosphate (PNPDPP) by hydroxamate ions mediated by gemini surfactants with quaternary ammonium bromide (16-n-16,2Br⁻, n = 3, 4, 6, 12) and pyridinium chloride (12py-n-py12,2Cl⁻, n = 3, 4) head group have been investigated at 27 °C. The gemini surfactant with the pyridinium head group, 12-py-4-py12,2Cl⁻ (tetramethylene-1,4 bis dodecylpyridinium chloride) shows a large rate acceleration effect than that with an ammonium head group, 16-12-16,2Br⁻, relative to those in water. The apparent pK _a of the hydroxamic acids have been determined in the presence of gemini surfactants. Catalytic system N-phenylbenzohydroxamate/12py-4-py12,2Cl⁻ demonstrated over ~1,590-fold and ~255-fold rate enhancement in the hydrolysis of PNPA and PNPDPP, respectively, for the identical reaction performed in buffer aqueous media at 27 °C. The second order rate constant and binding constants for reactions were determined employing pseudophase model for micellar catalysis.     

Comparative study on uni-univalent and uni-bivalent ion-exchange reaction on Doulite A-116

Determination of ion-exchange equilibrium constant (K) for Cl⁻/I⁻ and Cl⁻/C₂O₄²⁻ system was studied at different temperatures from 25 to 45°C and by varying concentration of iodide and oxalate ion solution. For both uni-univalent and uni-bivalent exchange systems, using 0.5 g of ion-exchange resin DUOLITE A-116 (in chloride form), the value of K increases with rise in temperature i.e., from 13.0 at 25°C to 19.05 at 45°C for Cl⁻/I⁻ system and 33.0 at 25°C to 63.0 at 45°C for Cl⁻/C₂O₄²⁻ system indicating the endothermic ion-exchange reaction. The difference in K values at the same temperature for the two was related to the ionic charge of exchangeable ions in the solution.     

Primary stage of the reaction between ozone and chloride ions in aqueous solution: Oxidation of chloride ions with ozone through the mechanism of oxygen atom transfer

Relying on experimental data on products and the kinetic features of the complex reaction between O₃ and Cl⁻(aq), we establish that the primary stage of the reaction proceeds via a mechanism in which an oxygen atom is transferred from an ozone molecule to a chloride ion. Analyzing the thermodynamic parameters of the primary stage, we conclude that a long-lived intermediate complex of a chloride ion and ozone is initially formed. The mechanism of acid catalysis in the reaction between O₃ and Cl⁻(aq) is described as the formation of a protonated intermediate complex, HO₃Cl, in the acidic medium and its rapid decomposition toward the formation of products.     

A study of ion exchange equilibrium for some uni-univalent and uni-divalent reaction systems using strongly basic anion exchange resin Indion-830 (Type 1)

A study of the thermodynamics of ion exchange equilibrium for uni-univalent Cl⁻/I⁻, Cl⁻/Br⁻ and uni-divalent Cl⁻/SO ₄ ²⁻ , Cl⁻/C₂O ₄ ²⁻ reaction systems was carried out using ion exchange resin Indion-830 (Type 1). The equilibrium constant K was calculated by taking into account the activity coefficients of ions both in solution and in the resin phase. For uni-univalent ion exchange reaction systems, the equilibrium constants K′ were also calculated from the mole fraction of ions in the resin phase. The K values calculated for uni-univalent and uni-divalent anion exchange reaction systems increased as the temperature grew, indicating the endothermic character of the exchange reactions with enthalpies of 38.2, 32.3, 7.6, and 11.4 kJ/mol, respectively. The article is published in the original.     

Calculated properties of neutral and charged Al<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript>Co<Subscript><Emphasis Type="Italic">m</Emphasis></Subscript> clusters by density functional theory

Density functional calculations are performed to study the structures and electronic properties of Al _n Co _m clusters with n = 1–7 and m = 1–2. Frequency analysis is also performed after structural optimization to make sure that the calculated ground states are real minima. The corresponding total and binding energies, adiabatic electron affinities and ionization potentials are presented and discussed to aid the identification of our calculations. The BSSE correction is also considered in our calculation. Among Al _n Co _m , Al _n Co _m ⁻, and Al _n Co _m ⁼ clusters (n = 1–7 and m = 1–2), Al₄Co⁻, Al₆Co⁻, Al₂Co₂, and Al₆Co₂ are predicted to be more stable. Our results are consistent with the available experimental data.     

Composition of the gas phase over Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and the enthalpies of atomization of AlO,Al<Subscript>2</Subscript>O,and Al<Subscript>2</Subscript>O<Subscript>2</Subscript>

The A1, O, AlO, A1₂O, Al₂O₂, WO₂, and WO₃, partial pressures in the vapor over Al₂O₃ in a tungsten Knudsen effusion cell between 2300 and 2600 K were derived from A1⁺, O⁺, AlO⁺, A1₂O⁺, Al₂O₂⁺, WO₂⁺, and WO₃⁺, ion intensities. The mass spectrometer was calibrated against the equilibrium constant of the WO₃(g) = WO₂(g) + O(g) reaction. Refined values of the ionization cross sections of AlO and A1₂O₂ were used in the partial pressure calculations. The enthalpies of atomization of aluminum suboxides were determined to be Δ_at H ^o(AlO, g, 0) = 510.7 ± 3.3 kJ mol⁻¹, Δ_at H ^o(Al₂O, g, 0) = 1067.2 ± 6.9 kJ mol⁻¹, and Δ_at H ^o(Al₂O₂, g, 0) = 1556.7 ± 9.9 kJ mol⁻¹.     

酸性AlCl3-BMIC离子液体中的铝阳极溶解

采用线性扫描伏安法研究了Lewis 酸性AlCl₃-BMIC (BMIC: 1-butyl-3-methylimidazolium chloride)离子液体中铝电极的溶解. 铝电极在阳极极化时出现了钝化现象, 钝化是由于在铝电极表面形成了固体AlCl₃钝化膜造成的. 铝的电化学溶解过程可以依次分为三个区: 电化学控制区、过渡区和钝化区. 在电化学控制区, 铝的电化学溶解速率随着电位的正移而逐渐增加; 在过渡区, 由于电极表面AlCl₄^-和Al₂Cl₇^-浓度发生改变而析出固体AlCl₃使得铝电化学溶解速率随着电位的正移而逐渐减小; 当钝化膜形成之后, 铝的电化学溶解速率不再随着电位的正移而发生改变, 铝溶解进入钝化区. 增加搅拌、升高温度、降低离子液体AlCl₃摩尔分数都可以增加铝溶解阳极极限电流密度.     

AlCl<Subscript>3</Subscript>/amide ionic liquids for electrodeposition of aluminum

AlCl₃/amide (acetamide, propionamide, butyramide) ionic liquids were used as the electrolytes to study the electrodeposition behavior of aluminum on a tungsten electrode. Cyclic voltammograms on the tungsten electrode indicate that Al(III) ions can be reduced to aluminum only within the molar ratio range of 1.1 to 1.5 and the reduction potentials of Al(III) ions strongly depend on the molar ratio of AlCl₃/amide. Raman spectra results reveal that the electroactive specie of AlCl₃/amide ionic liquids is Al₂Cl₇ ^?. Aluminum coatings were prepared at ?0.25 V (vs. Al/Al³⁺) and at 313 K in AlCl₃/amide ionic liquids with the molar ratio of 1.3. The SEM and cross-sectional SEM images show that all the obtained aluminum films are silver-colored, thick, and adherent. The EDS and XRD analysis confirm that the obtained deposits are pure aluminum. The present results can provide a new route for aluminum electrodeposition under ambient conditions.     

Organomagnesium Synthesis of <Emphasis Type="Italic">sec</Emphasis>-Butyl- and <Emphasis Type="Italic">tert</Emphasis>-Alkylchlorogermanes and Their Reaction with Ethynylmagnesium Bromide

The limits of application of organomagnesium synthesis to the substitution of chlorine atoms in tetrachlorogermane with bulky alkyl groups are established. The reaction of tetrachlorogermane with 2-butylmagnesium chloride leads to the substitution of one, two, or three chlorine atoms, yielding the corresponding alkylchlorogermanes (MeEtCH)_nGeCl_4-n . The reaction of GeCl₄ with tert-alkylmagnesium halides leads to the substitution of only one chlorine atom, yielding tert-alkyltrichlorogermanes RMe₂CGeCl₃ (R = Me, Et, Bu). tert-Butyltrichlorogermane reacts with ethylmagnesium bromide to give ethyl(tert-butyl)dichlorogermane. Isopropyltrichlorogermane reacts with tert-butylmagnesium chloride to give isopropyl(tert-butyl)dichlorogermane. This shows that the organomagnesium synthesis does allow linking of two bulky substituents to the germanium atom. The reaction of tert-alkyltrichlorogermanes and 2-butyltrichlorogermane in THF with ethynylmagnesium bromide, in which the hydrocarbon group is the most sterically accessible, allows substitution of all the three chlorine atoms, yielding the corresponding alkyl(triethynyl)germanes. The latter compounds react with the Grignard reagent and trimethylchlorosilane to give the corresponding alkyl(trimethylsilylethynyl)germanes.__________Translated from Zhurnal Obshchei Khimii, Vol. 75, No. 5, 2005, pp. 757–761.Original Russian Text Copyright © 2005 by O. Yarosh, Voronkov, Zhilitskaya, N. Yarosh, Albanov, Korotaeva.     

Modification of aluminum alkoxides with β-ketoesters: new insights into formation,structure and stability

[Al(OⁱPr)₂(β-ketoesterate)]₂ and Al(β-ketoesterate)₃ (β-ketoesterate = methyl, ethyl, iso -propyl, tert-butyl, allyl and 2-(methacryloyloxy)ethyl acetoacetate) were prepared by reaction of [Al(OⁱPr)₃]₄ with the corresponding β-ketoesters. Al(β-ketoesterate)₃ derivatives were exclusively formed at room temperature, whereas elevated reaction temperatures, causing thermal de-oligomerization of [Al(OⁱPr)₃]₄, were necessary for the formation of [Al(OⁱPr)₂(β-ketoesterate)]₂. All compounds were characterized by NMR spectroscopy, and [Al(OⁱPr)₂(tert-butyl acetoacetate)]₂ by a single crystal structure analysis. The [Al(OⁱPr)₂(β-ketoesterate)]₂ derivatives are asymmetrically substituted dimers with one octahedrally and one tetrahedrally substituted aluminum atom, bridged by two iso -propoxo groups, whereas the Al(β-ketoesterate)₃ derivatives are monomers with octahedrally coordinated aluminum. Transesterification as a possible side reaction was only observed at elevated temperatures for Al(tert-butyl acetoacetate)₃ in the presence of liberated iso -propanol. Dedicated to David Avnir on the occasion of his 60th birthday.     

Study on ion exchange equilibrium for some uni-univalent and uni-divalent reaction systems using strongly basic anion-exchange resin Duolite A-113

The study on thermodynamics of ion exchange equilibrium for uni-univalent Cl⁻/I⁻, Cl⁻/Br⁻, and uni-divalent Cl⁻/SO₄²⁻, Cl⁻/C₂O₄²⁻ reaction systems was carried out using ion-exchange resin Duolite A-113. The equilibrium constant K was calculated by taking into account the activity coefficient of ions both in solution as well as in the resin phase. The K values calculated for uni-univalent and uni-divalent anion exchange reaction systems were observed to increase with rise in temperature, indicating the endothermic exchange reactions having enthalpy values of 17.21, 36.60, 19.50, 18.43 kJ/mol respectively.     

Electrochemical studies of iodine in an aluminium chloride-butylpyridinium chloride ionic liquid part II. Neutral and basic solvent composition

The electrochemical behavior of iodine in an ambient temperature molten salt system, aluminum chloride-N-(1-butyl)pyridinium chloride (BuPyCl), have been studied in basic (excess BuPyCl) and neutral (1.0:1.0 AlCl₃: BuPyCI mole ratio) melt compositions. Acid-base interactions of iodine in different oxidation states with the ionic solvent are observed. High stability of triiodide ion in neutral butylpyridinium tetrachloroaluminate indicates relatively weak intermolecular interactions in this solvent. In basic solutions polyhalogen equilibria involving iodine in different oxidation states and chloride ions are established. In iodine and tetraethylammonium triiodide solutions a mixture of ICI₂^?, I₂Cl^?, I₃^? and I^? ions forms. The formation constants of I₂Cl^? and I₃^? and the equilibrium constant for I₂Cl^? disproportionation are estimated.     

Aluminum Solvate Complexes Forming in Acidic Methanol-Acetone Mixtures Studied by <Superscript>27</Superscript>Al NMR Spectroscopy

²⁷Al NMR spectroscopy is a powerful tool for the study of coordination and solvation in both aqueous and nonaqueous solutions. In this study, the complexes coexisting upon dissolution of AlCl₃ in acidic acetone + methanol solutions are shown to consist essentially of mixed hexacoordinated species of the general formula [Al(CH₃OH)_6−n (CH₃COCH₃) _n ]³⁺ (n=1,2 and 3), all exhibiting distinctly different ²⁷Al shielding effects. The relative populations of the various mixed species are found to be highly dependent upon the acetone:methanol mole ratio that in the more acetone-rich mixtures with aluminum become appreciably coordinated by acetone. The results demonstrate that the key factor for the formation of acetone-containing species in acidic methanolic solutions is having the CH₃COCH₃:CH₃OH mole ratio at 3:1.