Reduction of aromatic ketones with the (dpp-BIAN)AlI(Et2O) complex

Reduction of benzophenone and 4,4′-bis(methoxy)benzophenone with the aluminum complex (dpp-BIAN)AlI(Et₂O) (1) containing the dianionic dpp-BIAN ligand (dpp-BIAN is 1,2-bis[(2,6-diisopropylphenyl)imino]acenaphthene) affords the pinacolate complexes [(dpp-BIAN)AlI]₂[μ-O₂C₂Ph₄] (2) and [(dpp-BIAN)AlI]₂[μ-O₂C₂(C₆H₄OMe)₄] (3), respectively, which undergo the pinacolone rearrangement upon prolonged storage in diethyl ether to form [(dpp-BIAN)AlI]₂O (4). The reaction of 1 with fluoren-9-one produces stable pinacolate (dpp-BIAN)Al[μ-O₂(C₁₃H₈)₂] (7) and the (dpp-BIAN)AlI₂ complex (8). Compounds 2—4, 7, and 8 were characterized by ESR spectroscopy. Hydrolysis products of compounds 2 and 3 were characterized by ¹H NMR spectroscopy. The structures of complexes 4 and 7 were established by X-ray diffraction. dpp-BIAN is 1,2-bis[(2,6-diisopropylphenyl)imino]acenaphthene Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1134–1140, July, 2006.     

Facile synthesis of zwitterionic organoaluminum complexes containing formally dianionic homoscorpionate ligands

A series of zwitterionic aluminum complexes of the type AlX[(2‐O‐3,5‐tBu₂C₆H₂)₃PZ] (AlX [O₃PZ]; X = Cl, Me, Et, and iBu; Z = H, Me) containing C₃‐symmetric, formally dianionic, facially tridentate ligands [O₃PZ]^2? were prepared and structurally characterized. Although serendipitous, these complexes can be readily synthesized by partial protonolysis of AlX₃ with equal molar (2‐HO‐3,5‐tBu₂C₆H₂)₃P (H₃[O₃P]) or [(2‐HO‐3,5‐tBu₂C₆H₂)₃p.m.e](OTf) ({H₃[O₃PMe]}OTf) in THF at 25°C or elevated temperatures. Alcoholysis of AlMe[O₃PMe] ( 2 ) with an excess amount of MeOH in refluxing toluene generates AlOMe[O₃PMe] ( 10 ). Salt metathesis of AlCl[O₃PMe] ( 6 ) with nBuM (M = Li, MgCl) and NaOR (R = tBu, Ph) in ethereal solutions affords AlnBu[O₃PMe] ( 9 ) and AlOR[O₃PMe] (R = tBu ( 11 ), Ph ( 12 )), respectively. Reactivity of 10 , 11 , and 12 with respect to catalytic ring‐opening polymerization of ε‐caprolactone is assessed.     

Aluminum hydrides with radical-anionic and dianionic acenaphthene-1,2-diimine ligands

The reaction of 1,2-bis[(2,6-diisopropylphenyl)imino]acenaphthene (dpp-bian) with LiAlH₄ affords two products regardless of the solvent used (tetrahydrofuran or diethyl ether). These products were isolated as green and colorless crystals. Green crystals of the complex [(dpp-bian)Al(H)₂Li(THF)₃] (1) were obtained from tetrahydrofuran; colorless crystals of the complex [{dpp-bian(H₂)}Al(H)₂Li(Et₂O)₂] (2), from diethyl ether. The reactions of compound 1 with 2,6-di-tert-butyl-4-methylphenol and benzophenone gave monohydrides [(dpp-bian)Al(H)(OC₆H₂-2,6-Bu₂ ^t-4-Me)][Li(THF)₄] (3) and [(dpp-bian)Al(H)(OCHPh₂)- Li(THF)₂] (4), respectively. The diamagnetic aluminum hydride [(dpp-bian)AlH(THF)] (5) was synthesized by the reaction of dichloroalane HAlCl₂ (in situ) with the disodium salt of dpp-bian in THF; the paramagnetic hydride [(dpp-bian)AlH(Cl)] (6) containing the dpp-bian radical anion was synthesized by the reaction of the monosodium salt (dpp-bian)Na with monochloroalane H₂AlCl (in situ) in diethyl ether. The reaction of compound 6 with tert-butyllithium gives the complex [(dpp-bian)AlBu^t(Et₂O)] (7). Diamagnetic derivatives 1—5 and 7 were characterized by ¹Н NMR spectroscopy; paramagnetic compound 6, by ESR spectroscopy. The molecular structures of compounds 1—7 were determined by single-crystal X-ray diffraction.     

Aluminum compounds containing eta1- and/or eta5-bidentate dianionic pyrrolyl-methylamide ligands

A series of dialuminum compounds have been synthesized and their reactivity and application for lactide polymerization have been studied. The reaction of AlH3 x NMe3 with [C4H3NH(2-CH2NHtBu)] in diethyl ether generated a dimeric aluminum hydride compound, [[[C4H3N(2-CH2NtBu)]AlH]2] (1). The structure of 1 was confirmed by spectroscopy of a deuterated analogue of 1 with an Al--D function. Direct treatment of [C4H3NH(2-CH2NHtBu)] with LiAlH4 in diethyl ether resulted in colorless crystals of [[Li[micro-eta1:eta5-C4H3N(2-CH2NtBu)]2Al]2] (2) in 80 % yield after recrystallization from a toluene solution. The micro-eta1:eta5-pyrrolyl protons exhibit high-field shifts at delta=5.73, 6.15, and 6.72 comparable to a similar eta5-bonding mode in the literature. Treatment of 1 with 1 equiv acetone oxime or acetone in dichloromethane gave [[[C4H3N(2-CH2NtBu)]Al[varkappaO,varkappaN-(ON==CMe2)]]2] (3) and [[[C4H3N(2-CH2NtBu)]Al(O--CHMe2)]2] (4) in 67 % and 60 % yield, respectively. Compounds 1-4 have been characterized by X-ray diffractometry and were used as catalysts for epsilon-caprolactone polymerization.     

Dinuclear rhodium(II) pivalate complexes with N-donor ligands

Eight dinuclear rhodium(II) complexes containing various, (primarily, polyfunctional) N-donor ligands in the trans position with respect to the Rh-Rh bond were synthesized and characterized by X-ray diffraction. In the Chinese-lantern dinuclear rhodium(II) pivalates, Rh^II ₂ (μ-OOCCMe₃)₄(L)₂ (L is 2,3-diaminopyridine (2), 7,8-benzoquinoline (4), 2,2′:6′,2″-terpyridine (5), N-phenyl-o-phenylenediamine (7)), and Rh^II ₂ (μ-OOCCMe₃)₄L¹L² (3, L¹ is 2-phenylpyridine, L² = MeCN), the steric effects of the axial ligands are most strongly reflected in the Rh-N(L) and Rh-Rh bond lengths. The introduction of chelating ligands containing a conformationally rigid chelate ring leads to the cleavage of two carboxylate bridges to form the dinuclear double-bridged structure Rh^II ₂ (μ- OOCCMe₃)₂(OCCMe₃)₂(η²-L³)₂, where L³ is 8-amino-2,4-dimethylquinoline (6). The reaction of complex 7 containing coordinated N-phenyl-o-phenylenediamine with pyrrole-2,5-dialdehyde afforded the new Rh^II ₂(μ-OOCCMe₃)₄(L⁴)₂ complex (8) containing 5-(1-phenyl-1-H-benzimidazol-2-yl)-1H-pyrrole-2-carbaldehyde (L⁴) in the axial positions of the dirhodium tetracarboxylate fragment. The coordinated diamine differs in reactivity from the free diamine. The reaction of the former with the above dialdehyde affords the [1+1]-condensation product, viz., 5-{(E)-[(2-anilinophenyl)imino]methyl}-1-H-pyrrole-2-carbaldehyde, whereas the reaction of unsubstituted o-phenylenediamine gives 5-{(E)-[(2-aminophenyl)imino]methyl}-1-H-pyrrole-2-carbaldehyde (L⁵) . The reaction of the latter with Rh^II ₂(μ-OOCCMe₃)₄(H₂O)₂ affords the dinuclear complex Rh^II ₂(μ-OOCCMe₃)₂(OOCCMe₃)₂(η²-L⁵)₂ (9), which is an analog of complex 6 containing only two bridging carboxylate groups.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 581–591, March, 2005.     

Titanium complexes containing new dianionic tetradentate [ONNO]-type ligands with benzyl substituents on bridging nitrogen atoms: Syntheses, X-ray structures, and catalytic activities in ring opening polymerization of lactide

Several titanium isopropoxides 1–8 have been prepared by the reaction of Ti(O-i-Pr)₄ with a series of corresponding tetradentate Salan-type [ONNO] ligands with benzyl or methyl substituents on bridging nitrogen atoms. They have been characterized by ¹H NMR, ¹³C{¹H} NMR, and elemental analysis. Solid state structures of compounds 2, 4, 6, and 7 have been determined by X-ray crystallography. X-ray diffraction analysis and ¹H NMR confirmed that these titanium complexes were all monomeric species with a six-coordinated central titanium in their solid and solution structures. Complexes 2, 4, 6, and 8 with benzyl substituents on bridging nitrogens gave PLA with higher molecular weight than compounds 1, 3, 5, and 7 with methyl substituents did.     

Optically active rhodium complexes with indenyl-linked phosphane ligands

The optically active indenyl-linked phosphane ligands (S)-[2-(3H-inden-1-yl)-1-phenylethyl]diphenylphosphane (L₁) and (S)-[2-(4,7-dimethyl-3H-inden-1-yl)-1-phenyl-ethyl]diphenylphosphane (L₂) were synthesized in three steps from (R)-1-phenylethane-1,2-diol in excellent yields. Their lithium salts reacted with [Rh(μ-Cl)(η²-CH₂CH₂)₂]₂ at −78 °C in THF affording the planar chiral complexes (S,R_pl + S_pl)-[Rh(η⁵-indenyl-CH₂CH(Ph)PPh₂-kP)(η²-CH₂CH₂)] and (S,R_pl + S_pl)-[Rh(η⁵-4,7-dimethylindenyl-CH₂CH(Ph)PPh₂-kP)(η²-CH₂CH₂)] as 61:39 and 15:85 mixtures of diastereomers. The complexes were isolated in optically pure form by column chromatography. The stereochemical configuration of one of the diastereomers was determined by X-ray crystallography. The complexation of L₂ was studied in different solvents and with several Rh precursors and diastereomeric excesses up to 76% were achieved. The ability of the chiral ligands to control the stereochemistry at the metal center was tested by oxidative addition of methyl iodide. Diastereomeric excesses greater than 98% were observed.     

Synthesis of novel platinum-silver and platinum-copper complexes with bridging alkynyl ligands

The study of the reactivity of [Pt₂M₄(CCR)₈] (M=Ag or cu; R=Ph or ^tBu) towards different neutral and anionic ligands is reported. This study reveals that reactions of the phenylacetylide derivatives [Pt₂M₄(CCPh)₈] with anionic, X⁻ (X=Cl or Br) or neutral donors (CN^tBu or py) in a molar ratio 1:4 (m/donor ratio 1:1) yield the trinuclear anionic (NBu₄)₂[{Pt(CCPh)₄ (MX)₂] (M=Ag or Cu, X =Cl or Br) or neutral [{Pt(CCPh0₄=sAGL)₂] (L=CN^tBu or py) complexes, respectively. The crystal structure of (NBu₄)₂[{Pt(CCPh)₄}(CuBr)₂](4) shows that the anion is formed by a dianionic Pt(CCPh)₄ fragment and two neutral CuBr units joined through bridging alkynyl ligands. All the alkynyl groups are σ bonded to Pt and η²-coordinated to a Cu atom which have an approximately trigonal-planar geometry. By contrast, similar reactions with [Pt₂M₄(CC^tBu)₈] (molar ratio M/donor 1:1) afford hexanuclear dianionic (NBu₄)₂[Pt₂M₄(CC^tBu)₈X₂] or neutral [Pt₂Ag₄(CC^tBu0₈Py₂]. Only by treatment with a large exces of Br ⁻ (molar ratio M/Br⁻ 1:2) are the trinuclear complexes (NBu₄)₂[{Pt(CC^tBu₄ (MBr)₂] (M=Ag, Cu) obtained. Attempted preparations of analogous complexes with phosphines (L′=PPh₃ or PEt₃) by reactions of [Pt₂M₄(CCR₈] with L′ leads to displacement of alkynyl ligands from platinum and formation of neutral mononuclear complexes [trans-Pt(CCR)₂L′₂].     

Reactions of (dpp-BIAN)Mg(thf)<Subscript>3</Subscript> complex (dpp-BIAN is 1,2-bis{(2,6-diisopropylphenyl)imino}acenaphthene) with halogen-containing reagents

The reactions of the acenaphthenediimine complex (dpp-BIAN)Mg(thf)₃ (1) (dpp-BIAN is 1,2-bis{ (2,6-diisopropylphenyl)imino}acenaphthene) with various chlorine-, bromine-, and iodine-containing reagents afforded the unsymmetrical compounds [(dpp-BIAN)MgCl(thf)]₂ (6), [(dpp-BIAN)MgBr(thf)]₂ (7), and (dpp-BIAN)MgI(DME) (8). The reaction of complex 1 with Me₃SiCl in THF is accompanied by the cleavage of the THF molecule to form [{dpp-BIAN(CH₂)₄OSiMe₃}MgCl]₂ (9), in which the trimethylsilanyloxybutyl group is bound to one of the carbon atoms of the diimine fragment. The reaction of complex 1 with Me₂NCH₂CH₂Cl in THF produces the [dpp-BIAN(H)(CH₂)₂NMe₂] compound (10) containing no magnesium. Paramagnetic complexes 6–8 were characterized by ESR spectroscopy. Diamagnetic compounds 9 and 10 were studied by ¹H and ¹³C NMR spectroscopy. The molecular structures of complexes 6–10 were established by X-ray diffraction analysis. In the crystalline state, compounds 6, 7, and 9 exist as halogen-bridged dimers. In all magnesium derivatives, BIAN serves as a chelate ligand.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2641–2651, December, 2004.     

Catechin Photolysis Suppression by Aluminum Chloride under Alkaline Conditions and Assessment with Liquid Chromatography–Mass Spectrometry

Tea is rich in catechins and aluminum. In this study, the process of catechin photolysis was applied as a model for examining the effects of aluminum chloride (AlCl₃) on the structural changes of catechin and the alteration of aluminum complexes under blue light irradiation (BLI) at pH 8 using liquid chromatography and mass spectrometry techniques. Additionally, the effects of anions on catechin upon the addition of AlCl₃ and treatment with BLI were also studied. In this study, when 1 mM catechin was treated with BLI, a superoxide anion radical (O2•−) was generated in an air-saturated aqueous solution, in addition to forming a dimeric catechin (proanthocyanidin) via a photon-induced redox reaction. The relative percentage of catechin was found to be 59.0 and 95.7 for catechin treated with BLI and catechin upon the addition of 1 mM AlCl₃ treated with BLI, respectively. It suggested that catechin treated with BLI could be suppressed by AlCl₃, while AlCl₃ did not form a complex with catechin in the photolytic system. However, under the same conditions, it was also found that the addition of AlCl₃ inhibited the photolytic formation of O2•−, and reduced the generation of proanthocyanidin, suggesting that the disconnection of proanthocyanidin was achieved by AlCl₃ acting as a catalyst under treatment with BLI. The influence of 1 mM fluoride (F−) and 1 mM oxalate (C2O42−) ions on the photolysis of 1 mM catechin upon the addition of 1 mM AlCl₃ and treatment with BLI was found to be insignificant, implying that, during the photolysis of catechin, the Al species were either neutral or negatively charged and the aluminum species did not form a complex with anions in the photolytic system. Therefore, aluminum, which is an amphoteric species, has an inherent potential to stabilize the photolysis of catechin in an alkaline conditions, while suppressing the O2•− and proanthocyanidin generation via aluminum ion catalysis in the catechin/Al system under treatment with BLI.     

Titanium imido complexes containing 1,3,5-triazacyclohexane ligands

The syntheses of the 1,3,5-trimethyl- and tri-tert-butyl-1,3,5-triazacyclohexane-supported imido complexes [M(NR)(R′₃tach)Cl₂] (M = Ti or Zr (NMR only); R = Bu^t or 2,6-C₆H₃Prⁱ₂; R′ = Me or Bu^t) are reported, along with that of the thermally robust dibenzyl derivative [Ti(NBu^t)(Me₃tach)(CH₂Ph)₂]. The tert-butylimido ligand in [Ti(NBu^t)(Me₃tach)Cl₂] undergoes exchange with ArNH₂ (Ar = 4-C₆H₄Me or 2,6-C₆H₄Me or 2,6-C₆H₃Prⁱ₂) to form the corresponding arylimides [Ti(NAr)(Me₃tach)Cl₂]. The Me₃tach ring in [Ti(NR)(Me₃tach)Cl₂] undergoes slow exchange with Bu^t₃tach or Me₃tacn (1,4,7-trimethyl-1,4,7-triazacyclononane) to give the ring-exchanged products [Ti(NR)(Bu^t₃tach)Cl₂] and [Ti(NR)(Me₃tacn)Cl₂], respectively. The complexes [Ti(NR)(Me₃tach)X₂] (R = Bu^t or 2,6-C₆H₃Prⁱ₂; X = Cl or CH₂Ph) exhibit room-temperature dynamic NMR behaviour via an unusual trigonal twist of the facially coordinated Me₃tach ligand, and the activation parameters for these processes have been measured and are discussed. The X-ray structures of [Ti(NR)(Bu^t₃tach)Cl₂] (R = Bu^t or 2,6-C₆H₃Prⁱ₂) and [Ti(NBu^t)(Me₃tach)(X)₂] [X= Cl or CH₂Ph) are reported. Me₃tach and Bu^t₃tach = 1,3,5-trimethyl- and tri-tert-butyl-1,3,5-triazacyclohexane, respectively.     

Mono-and polynuclear CoII complexes with 2-hydroxy-6-methylpyridine

The reaction of 2-hydroxy-6-methylpyridine with Co(NO₃)₂·6H₂O or Co(F₃CSO₃)₂·6H₂O in the absence of a deprotonating agent produces the mononuclear complexes Co(HL)₄(NO₃)₂ or Co(HL)₄(F₃CSO₃)₂ (HL is 6-methyl-2-pyridone), respectively. In the presence of triethylamine, the reaction affords the trinuclear complex Co₃(HL)₂(L)₄(NO₃)₂ or the heptanuclear dicationic complex [Co₇L₁₂]·(F₃CSO₃)₂·4MeCN in the case of cobalt nitrate or cobalt trifluoromethanesulfonate, respectively. When HL is deficient, the replacement of the trimethylacetate anions in polymeric cobalt pivalate [Co(OH)_n(OOCCMe₃)_2−n ]_x gives rise to the hexanuclear complex Co₆(μ₃-OH)₂(η²,μ₃-L)₂(μ-OOCCMe₃)₈(HOOCCMe₃)₄, whereas the HLCo₆(μ₃-OH)(η²,μ₃-L)₃(η²,μ-L) (μ₃-L)(μ₃-OOCCMe₃)(μ-OOCCMe₃)₄(η²-OOCCMe₃) complex is generated when HL is present in excess. The structures of the reaction products were established by X-ray diffraction. Dedicated to Academician O. M. Nefedov on the occasion of his 75th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 1851–1862, November, 2006.     

Synthesis,crystal structure and spectral characterization of Co(II) complexes with acylpyrazolone ligands

The three new Cobalt(II) complexes [Co(L¹)₂(H₂O)₂] (1), [Co(L²)₂(H₂O)₂] (2), and [Co(L³)₂(H₂O)₂] (3) have been synthesized by interaction of acyl pyrazolone ligands, 4-(4-chlorobenzoyl)3-methyl1-phenyl1H-pyrazole5(4H)-one (HL¹), 4-(4-chlorobenzoyl)1-(3-chlorophenyl)3-methyl1H-pyrazole5(4H)-one (HL²) and 5-methyl4-(4-methylbenzoyl)2-phenyl2,4-dihydro3H-pyrazole3-one (HL³) with CoCl₂.6H₂O. The complexes were screened using FTIR, UV–Vis, TGA, and Single Crystal X-ray diffraction spectroscopic techniques. A relative study of the ligands’ FTIR spectra and their metal complexes reveal the formation, sifting, and disappearance of several bands during complexation. Other interpretations stipulated that these three complexes are mononuclear and exhibited octahedral geometry around Co²⁺.Triclinic crystal system, Distortion in Octahedral geometry, and Intermolecular hydrogen bonding confirmed by Single-crystal XRD analysis of [Co(L³)₂(EtOH)₂] complex.     

Binuclear and polynuclear transition metal complexes with macrocyclic ligands. 5. Novel complexes of asymmetric polydentate macrocyclic Schiff bases. Step-by-step synthesis

Reactions of 2,6-bis(3-aminopropylaminocarbonyl)pyridine (1) with 4-tert-butyl-2,6-diformylphenol and 2,5-diformylpyrrole in the presence of Ba(ClO₄)₂ in EtOH afford barium complexes with asymmetric macrocyclic Schiff bases as soft and hard ligands. The reaction of compound 1 with Cu(OCOCMe₃)₂ involves closure of a tetrahydropyrimidine ring to give a mononuclear complex, which was structurally characterized by X-ray diffraction analysis.     

Polydentate coordination of the thallium atom in complexes with chiral amidinylcyclopentadienyl ligands

The chiral thallium amidinium cyclopentadiene-N-ylide complexes [C₅(CO₂Me)₄{ArNC(Ar")NAr}]Tl were synthesized and structurally characterized by X-ray diffraction analysis and NMR spectroscopy. In these complexes, an unusual mode of coordination of the thallium atom was found, viz., the thallium atom is coordinated by both the side-chain nitrogen atom (N—Tl, 2.833(6) ) and the system of the cyclopentadienyl ring (Tl—Cp, 2.887(4) ⁵-bonding).     

Blue electrophosphorescent organoplatinum(II) complexes with dianionic tetradentate bis(carbene) ligands

Robust charge-neutral Pt(II) complexes containing dianionic tetradentate bis(N-heterocyclic carbene) ligands exhibit intense blue phosphorescence in fluid solutions and in polymer films, and have been vacuum-deposited as a phosphorescent dopant in organic blue-light-emitting diodes.     

Formation of Pt-S-Mn groups in platinum triphenylphosphine complexes with cymanthrenylthiolate ligands

Stepwise decarbonylation of the platinum complex with cymanthrenylthiolate ligands cis-(Ph₃P)₂Pt[(SC₅H₄)Mn(CO)₃]₂ (1) affords the cis-(Ph₃P)₂Pt[(SC₅H₄)Mn(CO)₃]-[(SC₅H₄)Mn(CO)₂] (2) and cis-(Ph₃P)₂Pt[(SC₅H₄)Mn(CO)₂]₂ (3) complexes. The replacement of one carbonyl group at the manganese atom with the lone electron pair of sulfur is accompanied by the formation of a new Mn-S bond giving rise to an unusual norbornane-type core. Complexes 1–3 were characterized by elemental analysis and IR spectroscopy. The structures of complexes 1–3 were established by single-crystal X-ray diffraction. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1508–1512, July, 2005.     

Synthesis,characterizations and crystal structures of new antimony (III) complexes with dithiocarbamate ligands

Eight new antimony (III) complexes containing dithiocarbamate ligands (R₂NCS₂)₂SbBr [R₂NCS₂ = OC₄H₈NCS₂ (1), C₂H₅NC₄H₈NCS₂ (2), Me₂NCS₂ (3), C₄H₈NCS₂ (4)] and (R₂NCS₂)₃Sb[R₂NCS₂ = C₅H₁₀NCS₂ (5), Bz₂NCS₂ (6), Et₂NCS₂ (7), (HOCH₂CH₂)₂NCS₂ (8)] have been synthesized by the reactions of antimony (III) halides with dithiocarbamate ligands in 1:2 or 1:3 stoichiometries. All the complexes have been characterized by elemental analysis, melting point as well as spectral [IR and NMR (¹H and ¹³C)] studies. The crystal structures of complexes 1, 5 and 8 have been determined by X-ray single crystal diffraction, and their electrochemical character has also been studied.     

Protonation of magnesium and sodium complexes containing dianionic diimine ligands. Molecular structures of 1,2-bis{(2,6-diisopropylphenyl)imino}acenaphthene (dpp-BIAN), [(dph-BIAN)H<Subscript>2</Subscript>(Et<Subscript>2</Subscript>O)], and [(dpp-BIAN)HNa(Et<Subscript>2</Subscript>O)]

Hydrolysis of magnesium complexes containing the dianionic acenaphthenediimine ligands, (dpp-BIAN)Mg(thf)₃ (1), (dph-BIAN)Mg(thf)₃ (2), and (dtb-BIAN)Mg(thf)₂ (3) (dpp-BIAN is 1,2-bis{ (2,6-diisopropylphenyl)imino}acenaphthene; dph-BIAN is 1,2-bis{(2-diphenyl)imino}acenaphthene; dtb-BIAN is 1,2-bis{(2,5-di-tert-butylphenyl)imino}acenaphthene), affords the corresponding diamines (dpp-BIAN)H₂ (4), (dph-BIAN)H₂(Et₂O) (5), and (dtb-BIAN)H₂ (6). Compounds 4 and 5 were isolated in the crystalline state and characterized by UV-Vis, IR, and ¹H NMR spectroscopy. Partial hydrolysis of (dpp-BIAN)Na₂(Et₂O)₃ gave the crystalline (dpp-BIAN)HNa(Et₂O)₂ complex (7), which was also characterized by spectroscopic methods. The structures of compounds 5 and 7 and free diimine dpp-BIAN were established by X-ray diffraction analysis.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2634–2640, December, 2004.     

Synthesis and controlled hydrolysis of organolanthanide complexes with mono- and dianionic benzimidazole-2-thiolate ligands

Treatment of Cp(3)Er with one equivalent of benzimidazole-2-thiol (H(2)Bzimt) in THF affords the monoanionic HBzimt(-) complex Cp(2)Er(η(2)-HBzimt)(THF)(2) (1). Reaction of Cp(3)Yb with two equivalents of H(2)Bzimt gives complex CpYb(η(2)-HBzimt)(2)(THF) (2) at room temperature. Treatment of Cp(3)Ln with three equivalents of H(2)Bzimt in reflux THF affords the homoleptic Ln(η(2)-HBzimt)(3)(THF)(2) (Ln = Er (3), Y (4)). Cp(3)Ln reacts with 0.5 equivalents of H(2)Bzimt to afford the dianionic Bzimt(2-) complexes [(Cp(2)Ln)(THF)](2)(μ-Bzimt) (Ln = Yb (5), Er (6), Dy (7), Y (8)) in good yields, in which the Bzimt(2-) ligand bridges the two metals in an μ-η(2):η(2) coordination mode. Interestingly, controlled hydrolysis of complexes Cp(2)Ln(η(2)-HBzimt)(THF)(2), CpLn(η(2)-HBzimt)(2)(THF) and [(Cp(2)Ln)(THF)](2)(μ-Bzimt) produces the same tetranuclear complexes [CpLn(μ(3)-OH)(μ-η(1):η(2)-HBzimt)](4) (Ln = Yb (9), Er (10), Y (11)), indicating that the hydrolysis selectivity greatly depends on the number of coordinated cyclopentadienyl groups. All complexes were characterized by elemental analysis, spectroscopic properties and X-ray single crystal diffraction analysis.