Automated sample preparation method for suspension arrays using renewable surface separations with multiplexed flow cytometry fluorescence detection

In this paper, we describe a new method of automated sample preparation for multiplexed biological analysis systems that use flow cytometry fluorescence detection. In this approach, color-encoded microspheres derivatized to capture particular biomolecules are temporarily trapped in a renewable surface separation column to enable perfusion with sample and reagents prior to delivery to the detector. This method provides for separation of the biomolecules of interest from other sample matrix components as well as from labeling solutions. After sample preparation, the beads can be released from the renewable surface column and delivered to a flow cytometer for direct on-bead analysis one bead at a time. Using mixtures of color-encoded beads derivatized for various analytes yields suspension arrays for multiplexed analysis. Development of this approach required a new technique for automated capture and release of the color-encoded microspheres within a fluidic system. We developed a method for forming a renewable filter and demonstrate its use for capturing microspheres that are too small to be easily captured in previous flow cells for renewable separation columns. The renewable filter is created by first trapping larger beads in the flow cell, and then smaller beads are captured either within or on top of the bed of larger beads. Both the selective microspheres and filter bed are automatically emplaced and discarded for each sample. A renewable filter created with 19.9 μm beads was used to trap 5.6 μm optically encoded beads with trapping efficiencies of 99%. The larger beads forming the renewable filter did not interfere with the detection of color-encoded 5.6 μm beads by the flow cytometer fluorescence detector. The use of this method was demonstrated with model reactions for a variety of bioanalytical assay types including a one-step capture of a biotinylated label on Lumavidin beads, a two-step sandwich immunoassay, and a one-step DNA binding assay. A preliminary demonstration of multiplexed detection of two analytes using color-encoded beads was also demonstrated. The renewable filter for creating separation columns containing optically encoded beads provides a general platform for coupling renewable surface methods for sample preparation and analyte labeling with flow cytometry detectors for suspension array multiplexed analyses.     

Determination of boron as boric acid in eye lotions using a sequential injection system

A simple and reliable sequential injection analysis (SIA) system is described for the determination of boron as boric acid in eye lotions. This method is based on the complexation reaction between d-sorbitol and boric acid followed by the acid-base reaction with methyl orange (MO). The colour change reaction is monitored at 520 nm. The system is able to monitor boron at a frequency of 30 samples per h with a relative standard deviation of less than 0.6%. The calibration graph is linear up to 12-mg l(-1). The system has a detection limit of 0.06-mg l(-1). No significant differences (at 95% probability level) were found between the proposed SIA method and the reference method.     

Comparison of soluble manganese(IV) and acidic potassium permanganate chemiluminescence detection using flow injection and sequential injection analysis for the determination of ascorbic acid in Vitamin C tablets

The limits of detection (3s) for ascorbic acid were 5×10⁻⁸ M with acidic potassium permanganate using both flow injection analysis (FIA) and sequential injection analysis (SIA) whereas the soluble manganese(IV) afforded 1×10⁻⁸ M and 5×10⁻⁹ M for FIA and SIA, respectively. Determinations of ascorbic acid in Vitamin C tablets were achieved with minimal sample pretreatment using a standard additions calibration and gave good agreement with those of iodimetric titration.     

Spectrophotometric determination of iron and boron in soil extracts using a multi-syringe flow injection system

In the last decade, significant advances in flow analysis have been reported, namely the extensive use of computer-controlled devices to enhance the autonomy and performance of analysers. In the present work, computer-controlled multi-syringe flow injection systems are proposed to perform the spectrophotometric determination of available iron and boron in soil extracts. The methodologies were based on the formation of ferroin complex (determination of iron) and azomethine-H reaction (determination of boron). Both determinations were performed in manifolds with similar configurations by changing the reagents present in the different syringes. In the determination of iron, elimination of Schlieren effect in the detection system was achieved through the binary sampling approach, where a three-way valve was actuated to intercalate small slugs of sample and reagent, promoting better mixing conditions for solutions with different values of refractive index. In the determination of boron, in-line sample blank measurement was attained by omitting the introduction of reagent through software control, without manifold reconfiguration. Linear calibration curves were established between 0.50 and 10.0 mg Fe l⁻¹ and between 0.20 and 4.0 mg B l⁻¹. No systematic difference was found when soil extracts were analysed by the proposed methodologies and compared to the respective reference procedures.     

Chromium speciation using activated alumina microcolumns and sequential injection analysis-flame atomic absorption spectrometry

A new procedure has been developed for chromium speciation in water by sequential injection analysis and flame atomic absorption spectrometry. The method involves the online retention of Cr(VI) anionic species and Cr(III) cationic species on alumina microcolumns, prepared by packing activated alumina in polytetrafluoroethylene tubes, followed by selective elution of Cr(VI) with 2 mol l⁻¹ NH₄OH and of Cr(III) with 0.2 mol l⁻¹ HNO₃. Studies were carried out on the effect of retention and elution conditions for both Cr species. The limit of detection values, established as the concentration corresponding to three times the standard deviation of blank measurements divided by the slope of the calibration line, achieved were 42 μg l⁻¹ for Cr(VI) and 81 μg l⁻¹ for Cr(III). The relative standard deviation of three independent determination of natural spiked samples were lower than 10% for concentration levels between 0.5 and 2 mg l⁻¹ of Cr. The developed procedure was applied to the analysis of two effluent sewage waters, and results obtained compared well with those obtained by a batch procedure. Recovery studies on natural spiked samples provided results between 93 and 103% for Cr(VI) and from 100 to 106% for Cr(III) for samples spiked with single species. For samples spiked with both Cr(VI) and Cr(III), the average recoveries varied from 86 to 101% for Cr(VI) and from 91 to 117% for Cr(III).     

Renewable microcolumns for automated DNA purification and flow-through amplification: from sediment samples through polymerase chain reaction

There is an increasing need for field-portable systems for the detection and characterization of microorganisms in the environment. Nucleic acids analysis is frequently the method of choice for discriminating between bacteria in complex systems, but standard protocols are difficult to automate and current microfluidic devices are not configured specifically for environmental sample analysis. In this report, we describe the development of an integrated DNA purification and polymerase chain reaction (PCR) amplification system and demonstrate its use for the automated purification and amplification of Geobacter chapellei DNA (genomic DNA or plasmid targets) from sediments. The system includes renewable separation columns for the automated capture and release of microparticle purification matrices, and can be easily reprogrammed for new separation chemistries and sample types. The DNA extraction efficiency for the automated system ranged from 3 to 25%, depending on the length and concentration of the DNA target. The system was more efficient than batch capture methods for the recovery of dilute genomic DNA even though the reagent volumes were smaller than required for the batch procedure. The automated DNA concentration and purification module was coupled to a flow-through, Peltier-controlled DNA amplification chamber, and used to successfully purify and amplify genomic and plasmid DNA from sediment extracts. Cleaning protocols were also developed to allow reuse of the integrated sample preparation system, including the flow-through PCR tube.     

Determination of paracetamol in pharmaceutical formulations using a sequential injection system

A simple method for the rapid determination of paracetamol in pharmaceutical formulations is described. The method involves oxidation of paracetamol by potassium hexacyanoferrate(III) and a subsequent reaction with phenol in the presence of ammonia. The blue complex formed is measured at 630 nm. The system has a sample frequency of 27 samples per h with a detection limit of 0.2 mg l⁻¹. The calibration curve is linear up to 60 mg l⁻¹ with a relative standard deviation of 1.2% (n=10).     

Automated measurement of permeation and dissolution of propranolol HCl tablets using sequential injection analysis

Aim of this study was to automate sampling and quantification of the previously described apparatus for combined determination of dissolution and permeation through Caco-2 monolayer by means of sequential injection analysis (SIA). Native fluorescence of propranolol HCl in Krebs-Ringer buffer (KRB) was used for quantification. Sampling was done at three different locations within the apparatus at a high sampling frequency (approximately 60 h⁻¹). Injection volume delivered to the fluorescence detector was 50 μL for permeation monitoring and 25 μL for dissolution monitoring. Linear regression for 50 μL injection yielded a detection limit calculated as 0.04 μg mL⁻¹ of propranolol HCl in KRB (R² > 0.999). However, linearity for dissolution monitoring was not given for the complete range of concentrations and first order polynomial calibration was established (R² > 0.9999). To conclude, the SIA system was able to monitor simultaneously dissolution and permeation of the immediate release propranolol HCl tablets and the authors succeeded in automating the apparatus for combined measurement of dissolution and permeation. In addition, the obtained data was consistent with data obtained by manual sampling followed by HPLC analysis.     

Automated sequential injection fluorimetric determination and dissolution studies of Ergotamine Tartrate in pharmaceuticals

A fully automated flow system for drug-dissolution studies based on the sequential injection analysis (SIA) was described and used for monitoring dissolution profiles of Ergotamine Tartrate (ET) in pharmaceutical formulations. 50 μl of dissolution medium was taken for each measurement at a flow rate of 40 μl s⁻¹ and detected by fluorescence detector using λ_ex=236 nm (λ_em≥390 nm). The calibration curve was linear over the range 0.03–0.61 mg l⁻¹ of ET (sufficient for the dissolution tests). Equation of the calibration curve was calculated giving the following values: F=117.7 c+0.80 (n=6); r=0.9998. Detection limit was 0.01 mg l⁻¹ of ET. The R.S.D. is less than 0.54 and 0.86% (n=10) when determining 0.61 and 0.03 mg l⁻¹ of ET in standard solution, respectively. The dissolution test of Bellaspon tablets (0.3 mg of ET in 1 tablet) was programmed for 20 min, with a continuous sampling rate of 120 h⁻¹ under conditions required by BP 1993.     

On-line dilution and determination of the amount of concentrated hydrochloric acid in the final products from a hydrochloric acid production plant using a sequential injection titration system

An on-line sequential injection titration system for the determination of the concentration of concentrated hydrochloric acid as final product from a hydrochloric acid production plant is described. The system involves on-line dilution of the concentrated hydrochloric acid solution to an acceptable range for direct measurement by merging the sample stream with a de-ionized water diluent stream, followed by mixing in a dilution coil, before aspiration into the sequential injection system. Concentrated standard solutions were treated in exactly the same way as the samples. The system was evaluated for reproducibility, linearity, accuracy, and sample throughput. A linear relationship between peak width and logarithm of acid concentration was found in the range 5.934–8.995 mol l⁻¹ and a concentration of 0.005 mol l⁻¹ NaOH solution was used as titrant. Samples from the production plant showed excellent agreement when compared with the manual and automated batchwise titrations. The relative standard deviation was found to be less than 0.4% with a sample frequency of 30 samples per hour.     

On-line coupling of sequential injection extraction with restricted-access materials and post-column derivatization for sample clean-up and determination of propranolol in human plasma

The presented paper deals with a new methodology for direct determination of propranolol in human plasma. The methodology described is based on sequential injection analysis technique (SIA) coupled with solid phase extraction (SPE) column based on restricted access materials (RAM). Special RAM column containing 30 μm polymeric material—N-vinylacetamide copolymer was integrated into the sequential injection manifold. SIA–RAM system was used for selective retention of propranolol, while the plasma matrix components were eluted with two weak organic solutions to waste.

Due to the acid–basic and polarity properties of propranolol molecule and principles of reversed-phase chromatography, it was possible to retain propranolol on the N-vinylacetamide copolymer sorbent (Shodex MSpak PK-2A 30 μm (2 mm × 10 mm)). Centrifuged plasma samples were aspirated into the system and loaded onto the column using acetonitrile–water (5:95, v/v), pH 11.00, adjusted by triethylamine. The analyte was retained on the column while proteins contained in the sample were removed to waste. Interfering endogenous substances complicating detection were washed out by acetonitrile–water (15:85), pH 11.00 in the next step. The extracted analyte was eluted by means of tetrahydrofuran–water (25:75), pH 11.00 to the fluorescence detector (emission filter 385 nm). The whole procedure comprising sample pre-treatment, analyte detection and column reconditioning took about 15 min. The recoveries of propranolol from undiluted plasma were in the range 96.2–97.8% for three concentration levels of analyte. The proposed SIA–RAM method has been applied for direct determination of propranolol in human plasma.     

Possibilities and limitations of the sequential injection chromatography technique for the determination of anticoccidial agents in water, pharmaceutical formulations and feed

This paper explores the potential of applying reversed-phase sequential injection chromatography (SIC) to determine the anticoccidial agents Lasalocid and Toltrazuril in various matrices including ground water, pharmaceutical formulations and feed. SIC was performed by connecting a 25 × 4.6 mm monolithic C18 column to a 2 m long pathlength capillary flow cell, where the usage of a flow cell lowers the detection limit compared to a conventional short-distance flow cell, providing a simple detection system for these two compounds which are initially poorly UV absorbents.The proposed set-up provides a high injection throughput of 12 h^{− 1}, as well as a limit of detection of 0.019 and 0.010 mg/L for Toltrazuril and Lasalocid, respectively. The repeatabilities obtained (n = 10) were lower than 2% and 4% for Toltrazuril and Lasalocid, respectively.     

A reagent-free method based on a photo-induced fluorimetry in a sequential injection system

According to the current demands of environmentally friendly analytical chemistry and with a view to achieving lower reagent consumption with improved analytical performance, an automatic methodology composed of a photoreactor and fluorimetric detection (λ_exc = 287 nm, λ_em = 378 nm) was developed. To this end, a sequential injection analysis (SIA) system was developed for indomethacin determination using ultra-violet (UV) light which promotes an increase in the fluorescence of indomethacin. This increase in sensitivity makes it possible to apply this methodology to a dissolution test and to determine indomethacin in pharmaceutical formulations.The calibration graph for indomethacin was linear between 4.10 × 10⁻⁶ and 9.00 × 10⁻⁵ mol L⁻¹and the detection limit was 1.23 × 10⁻⁶ mol L⁻¹. The method was proven to be reproducible with a R.S.D. < 5% and sampling rate of approximately 20 per hour. The potential effect of several compounds commonly used as excipients on analytical signals was studied and no interfering effect was observed. Statistical evaluation at the 95% confidence level showed good agreement between the results obtained for the pharmaceutical samples with both the SIA system and comparison batch procedures.     

Automated capillary electrophoresis with on-line preconcentration by solid phase extraction using a sequential injection manifold and contactless conductivity detection

An extension of a capillary electrophoresis instrument coupled to a sequential injection analysis manifold was developed for automated measurements with on-line solid-phase extraction preconcentration. An in-house built capacitively coupled contactless conductivity detector was employed for sensitive detection with narrow capillaries of 25 μm internal diameter. The system was assembled into standardized 19 in. frames and racks for easy transport and mobile deployment. The system can be left running unattendedly without manual intervention with good operation stability. To demonstrate the application of the system, a method for the determination of four drugs, namely ibuprofen, diclofenac, naproxen and bezafibrate, was developed with enrichment factors of up to several hundreds. Detection of the drug residues down to the nM-scale was found possible and the method was found suitable for the detection of ibuprofen in the waste water of a hospital in Hanoi.     

A thionine-based reversible redox sensor in a sequential injection system

According to the current demands of Green Analytical Chemistry and regarding the need for lower reagent consumption with improved analytical performance, an automatic methodology with a flow-through optosensor incorporating solid-phase spectrophotometric detection was developed. The sensor used in this work was based on the redox state of thionine whose oxidized form is blue and reduced form is colorless with monitoring carried out at 621 nm. This redox indicator was immobilized on gel beads and subsequently packed into a flow-through cell. It was then assembled into a sequential injection system and was shown to be an excellent alternative to monitor enzymatic redox reactions automatically as the redox catalysis is performed by glucose dehydrogenase. This enzyme is a representative dehydrogenase enzyme and uses NAD⁺ as cofactor, promoting the oxidation of glucose to glucono-lactone and reduction of NAD⁺ to NADH. The produced NADH promotes color depletion on the surface of the sensor. The calibration graph for glucose was linear between 5.74 × 10⁻⁴ and 2.00 × 10⁻³ mol L⁻¹ and detection limit was 1.72 × 10⁻⁴ mol L⁻¹. Glucose concentration in different samples including sera, salines, perfusion solutions, powder for preparing oral solutions and solutions for hemodialysis was determined. The method proved to be reproducible with a RSD < 5% for glucose determinations.     

Immunosensor for the determination of azidothymidine: its utilization as detector in a sequential injection analysis system

An amperometric immunosensor based on graphite paste (graphite powder and paraffin oil) has been constructed for the assay of azidothymidine (AZT). The graphite paste is impregnated with anti-AZT. The immunosensor can be reliably used for the assay of AZT in its pharmaceutical formulation. The potential used for AZT assay was 435 mV vs Ag/AgCl electrode. The surface of the immunosensor can be regenerated by simply polishing, obtaining fresh immunocomposite ready to be used in a new assay. Due to its reliability, the immunosensor was successfully used as a detector in a sequential injection analysis system, and gave reliable results for on-line assay of AZT purity in raw material and AZT contents in pharmaceutical formulations.     

Development of a capillary electrophoresis system coupled to sequential injection analysis and evaluation by the analysis of nitrophenols

A combination of a laboratory-made capillary electrophoresis system and a sequential injection analysis equipment is described. For characterization, the system was successfully applied to the separation and quantification of nitrophenols. A blue LED was used as light source, and hydrodynamic injection was carried out by using a pressure-stable solenoid valve and an inflatable pressure reservoir. A good reproducibility of migration time (0.5%) and peak heights (5%) were obtained. The calibration by using peak heights was found to be linear up to 776?µmol?L^?1 for all three compounds. The system was robust and reliable for autonomous analysis without observation. All maintenance requirements including the conditioning of the capillary and flushing of both buffer reservoirs were carried out automatically. Instrumentation aspects of the capillary electrophoresis part are compared with former described hyphenated flow systems showing maximal operation versatility. Instrumental control and data evaluation were carried out using the software package AutoAnalysis.     

On-line separation, simultaneous dilution and spectrophotometric determination of zinc in fertilisers with a sequential injection system and xylenol orange as complexing agent

A dialyser unit, equipped with a passive neutral membrane, was incorporated into the conduits of a sequential injection (SI) system for the on-line removal of suspended solids and simultaneous dilution of the analyte before reaction and detection of the analyte. The system was applied to the determination of zinc(II) in fertilisers. The fully automated system is able to analyse zinc at a sampling frequency of ten samples per hour at a %R.S.D. of better than 0.55. The calibration graph was linear between 10 and 50 mg l⁻¹. The detection limit was found to be 4.75 mg l⁻¹. The results obtained with the proposed SI analyser compared favourably with the standard manual flame atomic absorption spectrometric method.     

Determination of available phosphorus in soils by using a new extraction procedure and a flow injection amperometric system

A new extraction procedure based on an off-line extraction column was proposed for extracting of available phosphorus from soils. The column was fabricated from a plastic syringe fitted at the bottom with a cotton wool and a piece of filter paper to support a soil sample. An aliquot (50 mL) of extracting solution (0.05 M HCl + 0.0125 M H₂SO₄) was used to extract the sample under gravity flow and the eluate was collected in a polyethylene bottle. The extract was then analyzed for phosphorus contents by a simple flow injection amperometric system, employing a set of three-way solenoid valves as an injection valve. The method is based on the electrochemical reduction of 12-molybdophosphate which is produced on-line by the reaction of orthophosphate with acidic molybdate and the electrical current produced was directly proportional to the concentration of phosphate in range of 0.1-10.0 mg L⁻¹ PO₄-P, with a detection limit of 0.02 mg L⁻¹. Relative standard for 11 replicate injections of 5 mg L⁻¹ PO₄-P was 0.5%. A sample through put of 35 h⁻¹ was achieved, with consumption of 14 mg KCl, 10 mg ammonium molybdate and 0.05 mL H₂SO₄ per analysis. The detection system does not suffer from the interferences that are encountered in the photometric method such as colored substances, colloids, metal ions, silicate and refractive index effect (Schlieren effect). The results obtained by the column extraction procedure were well correlated with those obtained by the steady-state extraction procedure, but showed slightly higher extraction efficiency.     

Determination of Rh, Pd and Pt in urine samples using a pre-concentration sequential injection analysis system coupled to a quadrupole-inductively coupled plasma-mass spectrometer

The proposed flow system was developed in order to minimize the drawbacks related to the PGEs determination by quadrupole-inductively coupled plasma-mass spectrometry (Q-ICP-MS). It was intended not only to lower the limits of detection (LODs) but also to eliminate the interferences originating from some atomic and molecular ions produced in the argon plasma. This was accomplished by means of an on-line sample clean-up/pre-concentration step, using a chelating resin (Metalfix™ Chelamine™) in which Rh, Pd and Pt were preferably retained when compared with the interfering species.

The results obtained by using the developed flow system in the analysis of urine samples are presented. With a sampling rate of 9 samples h⁻¹ (i.e., 27 determinations) and a sample consumption of ca. 10 mL, the developed flow system allowed linear calibration plots up to 100 ng L⁻¹ with detection limits of 1.2 ng L⁻¹ (Rh), 0.4 ng L⁻¹ (Pd) and 0.9 ng L⁻¹ (Pt). Repeatability studies showed good precision (R.S.D.%, n = 5): 3.7% (Rh); 2.6% (Pd) and 2.4% (Pt), for 10 ng L⁻¹; 2.4% (Rh); 1.4% (Pd) and 1.9% (Pt), for 50 ng L⁻¹; and 1.3% (Rh); 0.58% (Pd) and 0.62% (Pt), for 100 ng L⁻¹. By spiking human urine samples, recovery tests were performed, and the values obtained ranged between 89% and 105% (Rh); 90% and 104% (Pd); and 93% and 105% (Pt).