Magnetic-Type Waves in a Tapered Waveguide of Subwavelength Cross Section

The characteristics of electromagnetic waves in a narrowing waveguide are investigated. A method for field analysis is developed based on the application of transverse modes parametrically dependent on the longitudinal coordinate. For a circular cross section waveguide, a system of equations for the wave amplitudes is obtained, the waves being coupled owing to a variable tilt of the walls. It is shown that in the adiabatic approximation, there exist independent eigenwaves whose structure reflects the field energy density variation due to the waveguide radius variation. A detailed analytical and numerical investigation of these fields has been carried out for a waveguide with a special profile of hypergeometric type. The applicability of the adiabatic approximation is studied and conversion of the fundamental mode into higher-order modes is assessed. The amplitudes of the higher-order modes are obtained using the Green function for ordinary differential equations. The region of the waveguide parameters is found where the higher-order mode amplitudes are not great and the adiabatic approximation is highly accurate. The dependence of the transmittance of a semi-infinite waveguide on the input radiation characteristics is obtained. It is established that the field amplitudes at the waveguide output strongly depend on the wavelength of the input radiation, on its transverse structure, and the waveguide profile steepness. The greatest output fields take place in the case of an abrupt dependence of the waveguide radius on the longitudinal coordinate.     

Acoustic phonons transport in a quantum waveguide embedded double defects

By using scattering matrix method, we investigate the acoustic phonons transport in a quantum waveguide embedded double defects at low temperatures. When acoustic phonons propagate through the waveguide, the total transmission coefficient versus the reduced phonon frequency exhibits a series of resonant peaks and dips, and acoustic waves interfere with each other in the waveguide to form standing wave with particular wavelengths. In the waveguide with void defects, acoustic phonons whose frequencies approach zero can transport without scattering. The acoustic phonons propagating in the waveguide with clamped material defects, the phonons frequencies must be larger than a threshold frequency. It is also found that the thermal conductance versus temperature is qualitatively different for different types of defects. At low temperatures, when the double defects are void, the universal quantum thermal conductance and a thermal conductance plateau can be clearly observed. However, when the double defects consist of clamped material, the quantized thermal conductance disappears but a threshold temperature where mode 0 can be excited emerges. The results can provide some references in controlling thermal conductance artificially and the design of phonon devices.     

基于微波透射法的金属薄膜方块电阻测量理论及其应用

依据矩形波导基模的场分布表达式和电磁边界条件,解析推导了插入金属薄膜后的矩形波导透射系数,建立了考虑介质衬底影响的金属纳米薄膜微波透射系数仿真计算方法及其方块电阻的微波测量方法.运用全波电磁仿真方法对金属纳米薄膜方块电阻的微波测量装置进行了仿真验证,结果表明透射系数幅度与方块电阻的对数之间呈线性关系.采用磁控溅射工艺分别在高阻硅和玻璃两种介质衬底表面制备了不同方块电阻值的银薄膜,并测量其微波透射系数.实测结果表明,提出的方法适用于方块电阻阻值为0.05—0.5?/square的金属薄膜.研究结果对于微纳制造领域的导电薄膜方块电阻表征具有参考价值.     

Nondestructive measurement of loss performance in channel waveguide devices with phase modulator

A novel method using a phase modulator is proposed for the nondestructive measurement of propagation loss in a channel waveguide. The phase modulator was fabricated on a Ti-diffused LiNbO3 crystal. Tuning the effective optical length of a waveguide by application of an electrical field on the phase modulator, the contrast of the resultant Fabry-Perot resonator in a channel waveguide device can be measured. The associated propagation attenuation coefficients are determined from the experimental results. Coordination of the phase modulator with an optical channel waveguide device not only allows measurement of the bending loss, but improvement in the relative intensity noise owing to the reduction of the reflected power.     

半径渐变同轴波导模式耦合系数研究

 为了用耦合波理论研究一些同轴结构的高频特性，推导了半径渐变同轴波导内模式耦合系数的计算公式，发现半径渐变圆波导模式耦合系数只是同轴波导模式耦合系数的特例。对同轴波导中的模式及其本征方程根的特点进行了讨论，通过建立同轴波导模式和矩形波导模式之间的对应关系，给出了同轴波导模式本征方程根的快速计算方法。对所给模式耦合系数公式进行了验证，耦合波理论计算结果与有限元方法计算结果吻合良好。     

介质镀膜空芯光纤在THz频段的传输特性

 理论分析了介质镀膜空芯光纤在THz频段的传输特性,得出了该光纤的特征方程及模式分布。利用射线光学原理计算了介质膜材料为聚酰亚胺、介质膜厚度为0.05 mm的光纤的衰减常数随介质膜内直径的变化情况。得出其主模在THz频段的衰减常数小于1 dB/m,该值远小于相同内径的金属圆波导在这一频段的衰减常数。模拟计算了介质膜厚度为0.05 mm、内径为1 mm,金属膜内径为1.05 mm的介质镀膜空芯光纤在0~1 THz的S参数,模拟结果显示该光纤在THz频段有很宽的通带,且在通带内衰减常数小于0.5 dB/m,可用于THz频段电磁波远距离传输。     

Temperature-Independent Waveguide Spectral Multiplexers/Demultiplexers

The possibility of creating spectral multiplexers/demultiplexers with temperature-independent parameters is considered. The reasons for the temperature shift of the central wavelength of waveguide arrays of multiplexers/demultiplexers, optical filters, Mach-Zehnder interferometers, and others are analyzed. The results of studies of various techniques of wavelength stabilization of integrated-optical spectral devices and the evaluation of the efficiency of each of them are presented. The prospects of using media with a negative temperature coefficient for creation of waveguide devices are shown.     

Characteristics of vertical bent coupling between straight and curved rectangular optical waveguides

In terms of the coupled mode theory (CMT) and the transfer matrix method, we present a technique and relative formulas including the bent coupling coefficient, amplitude coupling ratio, amplitude transmission ratio and propagation power for analyzing the vertical bent coupling between a curved rectangular waveguide and a straight one. Investigations show that the bent coupling appears in an effective coupling region by both sides of the central coupling point. Beyond this effective coupling region, however, the bent coupling is very weak, and the propagation power in the waveguide is closer to a constant. As the bent radius increases, or the thickness of the coupling layer between these two waveguides decreases, this effective coupling region becomes wider, in which the coupling behavior becomes stronger.     

聚合物电光波导传播常数和损耗系数的微扰解

对于聚合物电光波导,依据理想光波导耦合理论的微扰理论,推导传播常数和损耗系数的近似表达式,从而将求解本征值的复杂复数运算简化成简单实数运算。数值计算表明,这些近似解与正确解很好相符。给出的近似公式和特征曲线可供聚合物电光波导及其器件的设计和制备作参考。     

左手介质矩形波导的吸收特性

采用微扰法研究了左手介质矩形波导的吸收特性。由于色散方程的限制,左手介质波导不能传输基模,它的吸收特性也与右手介质矩形波导明显不同。结果发现, 模式的衰减系数随长宽比(a/b)的增加而减小,而在右手介质波导中结果恰恰相反。除此之外,当不同模式的光波在同一左手介质矩形波导中传输时,每一模式都对应着相邻很近的吸收峰和吸收谷。同时高阶模的衰减系数较低阶模的大。但是,当不同模式的光波在同一右手介质矩形波导中传输时,它们的衰减曲线随着波导宽度的增加而振荡的变化,并且趋近于芯层衰减系数。另外一方面,在右手波导中,高阶模式的衰减系数较低阶模式小。     

A New Method for Accurately Measuring Temperature Dependence of Refractive Index

A new high-accuracy method for measuring temperature dependence of refractive index is proposed and applied to some polymer waveguides. The method uses 3 m-lines from a grating coupler on the waveguide surface, and has an accuracy of better than 1 × 10^–5 (1/°C). The grating period dependent on the temperature does not affect the accuracy. The measurement thermo-optic (TO) coefficients of polycarbonate (PC) and polymethyl methacrylate (PMMA) are strongly dependent on the waveguide structure in contrast with the previously reported value. It is found that the TM-mode refractive index of UV-curing polymer (J-91) increases with the increase in temperature, contrary to common expectations for polymers. A highly efficient TO switch is expected using the J-91 polymer waveguide.     

Design and experiments for the waveguide to coaxial cable adapter of a cavity beam position monitor

The waveguide to coaxial cable adapter is very important to the cavity beam position monitor(CBPM)because it determines how much of the energy in the cavity could be coupled outside.In this paper,the waveguide to coaxial cable adapter of a CBPM is designed and experiments are conducted.The curve shapes of experiments and simulations are very similar and the difference in reflection is less than 0.1.This progress provides a reliable method for designing the adapter.     

Design and experiments for the waveguide to coaxial cable adapter of a cavity beam position monitor

The waveguide to coaxial cable adapter is very important to the cavity beam position monitor (CBPM) because it determines how much of the energy in the cavity could be coupled outside. In this paper, the waveguide to coaxial cable adapter of a CBPM is designed and experiments are conducted. The curve shapes of experiments and simulations are very similar and the difference in reflection is less than 0.1. This progress provides a reliable method for designing the adapter.     

聚合物波导微环谐振器的无热化设计

从波导微环谐振器的谐振方程出发,推导出了波导微环谐振器的无热化条件和谐振波长温度依赖特性表达式,分析了硅衬底PSQ聚合物波导微环谐振器滤波功能的温度特性。通过选择合适的聚合物衬底来取代传统的硅衬底,可极大地减小聚合物波导微环谐振器的温度敏感性,给出了聚合物衬底选择的方法。研究结果表明,所设计的全聚合物波导微环谐振器,在温度从20～65℃范围内谐振波长漂移量最大值为-0.0085 nm,温度依赖波长漂移率最大值为-0.00090 nm/K,实现了无热化。     

天线罩电厚度与材料电参数六端口测量系统设计

 介绍了一个可用于天线罩电厚度与介质材料介电常数测量的六端口反射计系统,它由对称波导五端口结与定向耦合器组成,其关键部件波导五端口结用HFSS软件仿真与设计。介绍了天线罩相对电厚度复反射系数的测量方法。用该系统对滑动短路器复反射系数进行了测量,测量结果表明,系统工作稳定,测试精度高。利用短路波导法测量了材料介电常数和损耗角正切,测量结果显示：介电常数测量的精度和稳定度较高,损耗正切的测量误差较大。     

基于场匹配的任意折射率平板波导ESI参数的分析和计算

首次采用了场的最小二乘方 (LSE)和最小均方误差 (LMS)判据寻找平板波导的等效阶跃折射率 (ESI)模型 ,并通过它预测了平板波导的传输特性。计算结果表明 ,原始波导与等效波导场分布在具有最大近似性的基础上 ,ESI模型可以在一定范围内有效的预测平板波导的传输特性。归一化频率与第一个高阶模的截止频率之比在小于 0 7的情况下 ,用上述两种判据找到的ESI模型预测传输常数相对误差小于 0 0 1 % ,预测归一化传输常数的相对误差小于 1 0 %。     

平面环形谐振腔微光学陀螺结构设计与优化

提出具有高群有效折射率的双环级联作为核心元件的谐振式平面光波导陀螺结构, 基于光学Sagnac原理得到了双微环耦合谐振式光学陀螺理论灵敏度与群有效折射率的一般表达式和双环与单环陀螺系统的灵敏度关系, 并由耦合模理论方法得到了双环系统耦合器的两个透射系数对应的群有效折射率变化情况. 在环腔半径R₁=R₂=100 μm、环腔传输损耗系数t₁=t₂=0.95的情况下, 针对环与环之间耦合器和环与波导之间耦合器透射系数对群有效折射率的不同影响, 得到了最大群有效折射率的产生条件. 采用文中参数(R=100 μm, t=0.95)计算的单环谐振式陀螺灵敏度为(10⁴-10⁵)°/h, 而双环级联谐振系统理论灵敏度能够达到10 °/h. 该研究对微环耦合谐振腔在角速度检测上的应用有重要的意义.     

Fabrication of integrated waveguide grating in azo polymers

In this Letter, we have introduced a technique, new to our knowledge, to fabricate gratings on a waveguide of azo-functionalized polymeric films using a slit mask and a fast, direct-writing method. To prevent the destruction of the waveguide by the grating formation on the waveguide, we placed a slit mask on the waveguide. By properly adjusting the resonance, this grating can be used as an integrated wavelength filter. We have produced an attenuation of 13.4?dB at 1562?nm with a FWHM of 3.45?nm. The grating has been fabricated as narrow as the width of the waveguide to couple filtered light into the waveguide by using a slit mask. Any light shifted from the resonance will pass through the waveguide undisturbed.     

多层介质波导的一种新方法及其在非均匀介质平面光波导中的应用

本文提出求解多层介质平面光波导的一个简单而直接的方法。将其应用于非均匀平面光波导,可以求解任意折射率分布和TM模问题。以抛物线型和指数型分布为例,说明只要分层数目足够多,本文介绍的方法可以达到任意精度。     

MNA晶体有效非线性系数的计算

有机晶体MNA不仅具有极好的光学非线性特性,而且有可能生长成天然的波导薄膜,是一种极有潜力的集成光学材料。本文通过对MNA晶体有效非线性系数d_eff的计算,得到其在Ⅰ类和Ⅱ类共线相匹配时的d_eff分别为18pm/V与34pm/V。