N2分子在强激光场中的场致电离

研究了在强激光脉冲中各种不同取向的N2分子发生场致电离的电离几率和表观电离效率.用量子化学方法计算了N2+分子离子在各种不同取向上的势能曲线,然后用传递矩阵方法得到了N2分子在不同方向上的电离几率,经过角度平均之后得到了各种取向的所有N2分子的总电离几率,并对计算结果进行了激光时间和空间修正.用800nm和70fs的激光脉冲对N2分子进行了在强激光场中的电离实验,得到了N2分子电离后产生的电子的角度分布图和电离几率随激光功率密度变化的关系曲线.实验结果和理论计算结果符合得很好.     

氮肥管理对夏玉米土壤CH4和N2O排放的影响

通过设置四个不同的氮肥管理措施, 即氮肥施用量300 kg N/ha (N300)和250 kg N/ha (N250)、改进的施肥模式(Optimized)以及施用缓释肥(SRU), 研究华北平原夏玉米生长季土壤与大气之间CH₄和N₂O的交换通量及相应措施的减排潜力. 结果表明, 在2008年整个夏玉米生长季, 土壤都是大气CH₄的净吸收库和N₂O的排放源. 夏玉米生长季土壤氧化吸收的CH₄总量从大到小依次为Optimized > N250 > SRU > N300, 对应的吸收总量依次为624.16、590.07、487.89以及316.02 g CH₄-C/ha, 各处理间氧化吸收的CH₄总量无显著差异. 与N300和N250这两个处理相比, 依据夏玉米对氮肥的需肥规律以及玉米根层土壤速效氮的供给能力而确定氮肥施用量, 同时再平衡施用磷肥和钾肥的改进施肥模式能够显著降低夏玉米生长季N₂O的排放. 施用聚乙烯包膜的尿素也能够显著降低夏玉米季N₂O的排放. 夏玉米生长季土壤排放的N₂O总量从大到小依次为N300 > N250 > Optimized > SRU, 对应的排放总量依次为3462.18、2340.07、1680.00以及911.91 g N2O-N/ha, 相应的N₂O排放系数分别为1.15%、0.94%、0.91%以及0.30%.     

g-C3N4/CaTi2O5复合材料制备及其光催化性能

利用类石墨氮化碳（g-C₃N₄）和亚稳相钙钛氧化物（CaTi₂O₅）固相法制备C₃N₄/CaTi₂O₅复合材料。利用X射线衍射（XRD）、金相显微镜、扫描电子显微镜（SEM）及附带能谱分析仪（EDS）和N₂吸附-脱附对样品的显微结构和比表面积进行检测分析,并用紫外-可见吸收光度计（UV-Vis）测试了样品的光吸收性能,研究C₃N₄与CaTi₂O₅物质的量之比（n_C3N4/nCaTi₂O₅）对C₃N₄/CaTi₂O₅复合样品的物相结构和微观形貌的影响,同时考察C₃N₄/CaTi₂O₅复合样品在可见光照射下光催化降解罗丹明染料效果。实验结果表明：相比纯C₃N₄和CaTi₂O₅样品,C₃N₄/CaTi₂O₅复合样品在可见光下具有较高的光催化性能,随着n_C3N4/nCaTi₂O₅增加,样品的光催化降解率随之增加而后降低,当n_C3N4/nCaTi₂O₅=1：1时,样品的光催化降解率达到最大值99.5%,并且循环重复利用5次后,样品的光催化剂降解率仍几乎保持不变。复合样品光催化性能提高主要归因于复合能级结构有效地抑制了电子和空穴复合所致。     

CeO2改性Ag-V2O5/TiO2催化剂的甲基吡啶氧化脱甲基性能

以锐钛矿TiO_2为载体,考察了CeO_2改性对Ag-CeO_2-V_2O_5/TiO_2催化3-甲基吡啶氧化脱甲基性能的影响,并优化了催化剂组成与制备条件.结果表明:Ce掺杂改性不仅能够与V物种作用形成Ce VO_4,而且促进V_2O_5分散,改善活性组分的氧化还原性能,从而提高3-甲基吡啶脱甲基转化率与选择性,改善Ag-V_2O_5/TiO_2催化性能.适宜的催化剂组成为V_2O_5负载量15%,Ce/V的摩尔比0.33,Ag质量分数1.0%.过高的焙烧温度将导致TiO_2载体向金红石型转变,Ag-CeO_2-V_2O_5/TiO_2适宜制备条件为450℃焙烧4 h.     

S2N2环桥连配合物的MO研究

本文根据MAD-SCC-EHMO法的计算结果，对典型硫氮环S₂N₂与过渡金属单啮和双啮桥连的配合物的电子结构和成键情况做了研究。用衡量相对稳定性的三个指标：稳定性能，HOMO-LUMO能隙和重迭布居比较了1∶2，1∶1和2∶1型配合物的稳定性，并用碎片分子轨道法分析了S₂N₂环的分子轨道与过渡金属d轨道间的相互作用。     

在CeO2-ZrO2中加入La2O3对改善单Pd三效催化剂性能的作用

浸渍法制备了CeO₂-ZrO₂-La₂O₃复合氧化物，用XRD、热分析（TG-DTA，DSC）、BET表面积、H₂-TPR等对合成样品进行表征，研究了La₂O₃的加入对CeO₂-ZrO₂和单钯Pd/CeO₂-ZrO₂/γ-Al₂O₃/蜂窝陶瓷催化剂性能和热稳定性的影响。结果表明，在CeO₂-ZrO₂-La₂O₃中，La的存在能促进CeO₂-ZrO₂固溶体的还原，提高贮氧能力；在Pd/CeO₂-ZrO₂/γ-Al₂O₃中加入La有利于提高催化剂的耐热稳定性，阻止γ-Al₂O₃在高温下的晶相转变，进一步稳定Al₂O₃的结构，保持其高的表面积。在贵金属Pd的负载量为1 g·L^-1的条件下，测定了Pd/CeO₂-ZrO₂-La₂O₃/γ-Al₂O₃/蜂窝陶瓷催化剂对CO、C₃H₈和NOx的三效催化净化活性。结果表明，在Pd/CeO₂-ZrO₂/Al₂O₃/蜂窝陶瓷催化剂中加入La₂O₃后，能明显地改善催化剂的低温活性和三效催化性能，经1 000 ℃老化10 h后，CO、C₃H₈和NO_x净化的起燃温度（T₅₀）分别为330 ℃、350 ℃和380 ℃。     

MoS2/g-C3N4复合材料的制备及可见光催化性能

首先在N-甲基吡咯烷酮溶液中超声剥离得到少层的MoS₂,将其与石墨相氮化碳（g-C₃N₄）复合,制得MoS₂/g-C₃N₄复合材料。采用X射线衍射（XRD）,扫描电镜（SEM）,X射线光电子能谱（XPS）,傅里叶变换红外光谱（FTIR）,Raman光谱,紫外-可见漫反射吸收光谱（DRS）和光致荧光（PL）技术对复合材料进行表征。可见光下考察MoS₂/g-C₃N₄复合材料光催化降解罗丹明B（RhB）的活性,结果表明：将少量MoS₂与g-C₃N₄复合可明显提高光催化活性,且1%（w/w）MoS₂/g-C₃N₄复合物的光催化活性最高,可能的原因是MoS₂和g-C₃N₄匹配的能带结构,增大了界面间电荷的传输,降低了光生电子-空穴的复合,进而提高了光催化活性。     

Li2O-TiO2-SiO2-P2O5和Li2O-TiO2-Al2O3-P2O5体系锂离子固体电解质的制备及性能研究

一些具有NASICON型网格结构的固体电解质具有高的电导率和好的稳定性,NASICON的意思是Na Super Ionic Conductor[1]。当NaZr2(PO4)3中P5 被Si4 部分取代时便可以得到具有NASICON结构的Na1 xZr2SixP3-xO12体系,其具有高的钠离子电导率。然而有相同结构的Li1 xZr2SixP3-xO12体系的离子电导率却很低,这是因为Li 半径太小,而NASICON三维网格结构的离子通道太大,两者不匹配而使电导率下降[2]。但当LiZr2(PO4)3中Zr4 被离子半径小些的Ti4 取代,所得LiTi2(PO4)3的通道就与Li 半径相匹配,适合于锂离子的迁移,从而使其电导率…     

Li2ZrO3材料吸收CO2性能的进一步研究

用不同结构的ZrO₂合成了一系列在高温下吸收CO₂的Li₂ZrO₃材料，并详细的研究了反应物质的物理和化学性质对生成物吸收CO₂性能的影响。采用SEM、XRD以及TG分析法分别进行了材料结构及其吸收CO₂性能的表征，并使用XPS法测定了材料表面的元素组成。实验结果表明，使用不同结构的ZrO₂合成的Li₂ZrO₃，其吸收CO₂的性能明显的不同。用ZrO₂(t)(四方)合成的Li₂ZrO₃吸收CO₂的速度快，在500 ℃下，20% CO₂（80%空气）的气氛中保持3h，其吸收量可达25（±0.6）%（wt），而以ZrO₂(m)(单斜)为原料制备的Li₂ZrO₃在上述吸收条件下重量仅增加9（±0.6）%（wt）。此外，实验结果还表明化学元素的掺杂对用ZrO₂(m)合成的Li₂ZrO₃的CO₂吸收速度及吸收容量影响较大。     

以Fe2P2O7为前驱体制备LiFePO4及其电化学性能

以磷铁废渣（Fe_1.5P）和温室效应气体CO₂为原料,以磷酸为补充磷源合成磷酸铁锂（LiFePO₄）的前驱体Fe₂P₂O₇,并研究了其合成过程对LiFePO₄正极材料储能性能的影响。采用SEM观察了LiFePO₄的表面形貌,采用XRD分析了LiFePO₄和Fe₂P₂O₇的晶体结构。进一步对该方法进行优化,发现Fe_1.5P与磷酸混合物（n_Fe1.5P：n_H3PO4=1：1）在800℃热处理6 h合成的Fe₂P₂O₇对应的LiFePO₄/C电化学性能最好,在0.1C,0.2C,0.5C和1C倍率下的容量分别可达130,126,117和108 mAh·g^-1。     

固氮酶的固氮机理和其人工模拟问题的探讨

固氮酶将N₂ 还原为NH₃ 的过程是自然界实现氮循环的重要环节。本文着重对固氮酶的固氮机理和其活性中心FeMo 辅基的人工模拟合成进行探讨, 其中包括FeMo蛋白中的质子和电子的传递, FeMo 辅基对N₂ 的活化方式,Mo 原子的作用, 固氮活性的测试。最后还就固氮酶的活性中心FeMo 辅基的人工模拟合成进行了探讨。     

铀催化的氮气活化

氮气约占空气总体积的78％,是大自然赋予人类的宝贵资源.如何实现氮气转化为动植物可利用的含氮化合物,关系着人类的未来和社会的可持续发展.氮气活化,作为一个非常重要的研究领域,一直以来都是科学家面临的重大挑战.目前,低价铀金属有机化合物展现出良好的小分子活化能力.本综述主要介绍了含铀化合物对氮气活化的研究进展,并对其未来...     

稀土和锕系配合物促进的氮气活化与转化研究

氮气分子具有高的化学惰性,氮气的活化与转化充满挑战.含氮有机物在国民经济发展中具有广泛且重要的价值,实现温和条件下由氮气直接转化为含氮有机物在科学和经济上均具有重要意义.目前对氮气的活化与转化的研究主要集中在主族与过渡金属配合物,稀土和锕系元素由于具有特殊的电子结构,在氮气的活化与转化领域展现出了区别于主族和过渡金属的特殊反应活性.我国作为稀土和钍资源大国,开展稀土及锕系元素的固氮转化研究具有重要的战略意义.本综述归纳和总结了过去五年内稀土和锕系金属氮气配合物的合成,以及由稀土和锕系配合物促进的以氮气为原料生成含氮有机物的研究.     

The Interstitial Carbon of the Nitrogenase FeMo Cofactor is Far Better Stabilized than Previously Assumed

The first quantum-mechanical calculations of all relevant potential constants in both the iron-molybdenum cofactor and the iron-vanadium cofactor of nitrogenase suggest that the carbide is bound to the center of the enzyme much more strongly than hitherto assumed. Previous studies seemed to indicate a dummy function of the interstitial carbon, with a weak force constant (ca. 0.32 N cm⁻¹). Our new investigations confirm a different picture: the central carbon atom binds the iron-sulfur cluster through six covalent C−Fe bonds. With a potential constant of more than 1.3 N cm⁻¹, the interstitial carbon also appears to be dynamically persistent. According to our investigations, the values for the elasticity within the iron-sulfur cluster have to be corrected too. These new details on the mechano-chemical properties of the FeMo cofactor will be important for elucidating the catalytic cycle of nitrogen fixation. By implementing our new algorithm in the freely available COMPLIANCE program, the dependence on the coordinates during the calculation of Hesse matrices is eliminated completely.     

Dinitrogen Activation Upon Reduction of a Triiron(II) Complex

Reaction of a trinuclear iron(II) complex, Fe₃Br₃ L ( 1 ), with KC₈ under N₂ leads to dinitrogen activation products ( 2 ) from which Fe₃(NH)₃ L ( 2‐1 ; L is a cyclophane bridged by three β‐diketiminate arms) was characterized by X‐ray crystallography. ¹H NMR spectra of the protonolysis product of 2 synthesized under ¹⁴N₂ and ¹⁵N₂ confirm atmospheric N₂ reduction, and ammonia is detected by the indophenol assay (yield ～30 %). IR and Mössbauer spectroscopy, and elemental analysis on 2 and 2‐1 as well as the tri(amido)triiron(II) 3 and tri(methoxo)triiron 4 congeners support our assignment of the reduction product as containing protonated N‐atom bridges.     

Activation of CO2 by Vanadium Nitrogenase

The reduction of CO₂ into useful products, including hydrocarbon fuels, is an ongoing area of particular interest due to efforts to mitigate buildup of this greenhouse gas. While the industrial Fischer–Tropsch process can facilitate the hydrogenation of CO₂ with H₂ to form short‐chain hydrocarbon products under high temperatures and pressures, a desire to perform these reactions under ambient conditions has inspired the use of biological approaches. Particularly, enzymes offer insight into how to activate and reduce CO₂, but only one enzyme, nitrogenase, can perform the multielectron, multiproton reduction of CO₂ into hydrocarbons. The vanadium‐containing variant, V‐nitrogenase, displays especial reactivity towards the hydrogenation of CO and CO₂. This Focus Review discusses recent progress towards the activation and reduction of CO₂ with three primary V‐nitrogenase systems. These systems span both ATP‐dependent and ATP‐independent processes and utilize approaches with whole cells, isolated proteins, and extracted cofactors.     

Quantum Mechanical Calculations of Redox Potentials of the Metal Clusters in Nitrogenase

We have calculated redox potentials of the two metal clusters in Mo-nitrogenase with quantum mechanical (QM) calculations. We employ an approach calibrated for iron–sulfur clusters with 1–4 Fe ions, involving QM-cluster calculations in continuum solvent and large QM systems (400–500 atoms), based on structures from combined QM and molecular mechanics (QM/MM) geometry optimisations. Calculations on the P-cluster show that we can reproduce the experimental redox potentials within 0.33 V. This is similar to the accuracy obtained for the smaller clusters, although two of the redox reactions involve also proton transfer. The calculated P¹⁺/P^N redox potential is nearly the same independently of whether P¹⁺ is protonated or deprotonated, explaining why redox titrations do not show any pH dependence. For the FeMo cluster, the calculations clearly show that the formal oxidation state of the cluster in the resting E₀ state is MoIIIFe3IIFe4III , in agreement with previous experimental studies and QM calculations. Moreover, the redox potentials of the first five E₀–E₄ states are nearly constant, as is expected if the electrons are delivered by the same site (the P-cluster). However, the redox potentials are insensitive to the formal oxidation states of the Fe ion (i.e., whether the added protons bind to sulfide or Fe ions). Finally, we show that the later (E₄–E₈) states of the reaction mechanism have redox potential that are more positive (i.e., more exothermic) than that of the E₀/E₁ couple.     

Beryllium Atom Mediated Dinitrogen Activation via Coupling with Carbon Monoxide

The reactions of laser‐ablated beryllium atoms with dinitrogen and carbon monoxide mixtures form the end‐on bonded NNBeCO and side‐on bonded (η²‐N₂)BeCO isomers in solid argon, which are predicted by quantum chemical calculations to be almost isoenergetic. The end‐on bonded complex has a triplet ground state while the side‐on bonded isomer has a singlet electronic ground state. The complexes rearrange to the energetically lowest lying NBeNCO isomer upon visible light excitation, which is characterized to be an isocyanate complex of a nitrene derivative with a triplet electronic ground state. A bonding analysis using a charge‐ and energy decomposition procedure reveals that the electronic reference state of Be in the NNBeCO isomers has an 2s⁰2p² excited configuration and that the metal‐ligand bonds can be described in terms of N₂→Be←CO σ donation and concomitant N₂←Be→CO π backdonation. The results demonstrate that the activation of N₂ with the N?N bond being completely cleaved can be achieved via coupling with carbon monoxide mediated by a main group atom.