Static and free vibration analysis of straight and circular beams on elastic foundation

Static and free vibration analyses of straight and circular beams on elastic foundation are investigated. The Timoshenko beam theory is adopted in the derivation of the governing equation. Ordinary differential equations in scalar form obtained in the Laplace domain are solved numerically using the complementary functions method. The static and free vibration analyses of beams on elastic foundation are analyzed through various examples.     

Free vibration of non-uniform axially functionally graded beams using the asymptotic development method

The asymptotic development method is applied to analyze the free vibration of non-uniform axially functionally graded(AFG) beams, of which the governing equations are differential equations with variable coefficients. By decomposing the variable flexural stiffness and mass per unit length into reference invariant and variant parts, the perturbation theory is introduced to obtain an approximate analytical formula of the natural frequencies of the non-uniform AFG beams with different boundary conditions.Furthermore, assuming polynomial distributions of Young's modulus and the mass density, the numerical results of the AFG beams with various taper ratios are obtained and compared with the published literature results. The discussion results illustrate that the proposed method yields an effective estimate of the first three order natural frequencies for the AFG tapered beams. However, the errors increase with the increase in the mode orders especially for the cases with variable heights. In brief, the asymptotic development method is verified to be simple and efficient to analytically study the free vibration of non-uniform AFG beams, and it could be used to analyze any tapered beams with an arbitrary varying cross width.     

变截面黏弹性直杆纵振时复频率分析的差分解法

从一维黏弹性本构方程出发,导出了黏弹性变截面直杆纵向振动微分方程的一般形式,采用了有限差分法,并以二阶矩阵表示的递推形式,建立了该问题的复特征值方程组。两种Maxwell黏弹性变截面（指数指数、线性函数）直杆的数值计算表明,该方法运算简单,计算精度高,能适用于求解任意变截面黏弹性直属的纵向自由振动问题。     

压电-弹性层合梁自由振动分析的新方法

将状态空间法和微分求积法相结合,分析了压电-弹性层合梁的自由振动. 通过微分求积把状态方程在每一个节点处离散,进而求得解答. 选用不同的节点数目, 分析了方法的收敛性. 计算结果与相关文献的结果能较好地符合. 该方法 对于分析压电-弹性层合梁的工程振动问题非常方便.     

基于无网格法的Timoshenko曲梁动力分析

曲梁具有外形美观、受力性能良好的优点,故在工程中得到广泛应用。本文基于移动最小二乘近似和一阶剪切变形理论,提出一种对Timoshenko曲梁自由振动和受迫振动进行分析的无网格方法。通过一系列离散点离散曲梁,建立曲梁无网格模型,然后推导曲梁势能和动能方程,通过哈密顿原理给出曲梁自由振动和受迫振动的控制方程,因为本文方法不能直接施加边界条件,所以使用完全转换法处理本质边界条件,最后求解方程得到频率和振动模态。文末通过算例验证了本文方法的有效性,且通过收敛性分析表明本文方法具有较好的收敛性,并进一步分析了不同边界条件、跨高比和变截面变曲率对曲梁自由振动和受迫振动的影响,将计算结果与文献解或ABAQUS解进行对比分析,表明本文方法具有较高的精度,且适用于实际工程情况。     

变截面欧拉梁自由振动分析的重采样微分求积法

采用重采样微分求积法求解了变截面欧拉梁的自由振动问题。推导了变截面梁的控制方程离散格式,采用重采样矩阵方法对边界条件进行处理,给出了变截面梁自由振动算法。采用本文方法对不同类型截面形式和不同边界条件的变截面梁进行自由振动分析,并和其他解法进行比较。计算结果表明,本文方法可以适用于不同变截面类型和不同边界条件,计算精度与解析解吻合良好,具有良好的收敛性能。在同等精度条件下网格点数少于现有计算方法。重采样转换矩阵边界处理方法相比于传统边界处理方法具有更快的收敛性能。     

The analysis of thin walled composite laminated helicopter rotor with hierarchical warping functions and finite element method

In the present paper, a series of hierarchical warping functions is developed to analyze the static and dynamic problems of thin walled composite laminated helicopter rotors composed of several layers with single closed cell. This method is the development and extension of the traditional constrained warping theory of thin walled metallic beams, which had been proved very successful since 1940s. The warping distribution along the perimeter of each layer is expanded into a series of successively corrective warping functions with the traditional warping function caused by free torsion or free bending as the first term, and is assumed to be piecewise linear along the thickness direction of layers. The governing equations are derived based upon the variational principle of minimum potential energy for static analysis and Rayleigh Quotient for free vibration analysis. Then the hierarchical finite element method is introduced to form a numerical algorithm. Both static and natural vibration problems of sample box beams are analyzed with the present method to show the main mechanical behavior of the thin walled composite laminated helicopter rotor. The project supported by the National Natural Science Foundation of China (19932030)     

Nonlinear Vibration Analysis of Timoshenko Beams Using the Differential Quadrature Method

This paper addresses the large-amplitude free vibration of simplysupported Timoshenko beams with immovable ends. Various nonlineareffects are taken into account in the present formulation and thegoverning differential equations are established based on theHamilton Principle. The differential quadrature method (DQM) isemployed to solve the nonlinear differential equations. Theeffects of nonlinear terms on the frequency of the Timoshenkobeams are discussed in detail. Comparison is made with otheravailable results of the Bernoulli–Euler beams and Timoshenkobeams. It is concluded that the nonlinear term of the axial forceis the dominant factor in the nonlinear vibration of Timoshenkobeams and the nonlinear shear deformation term cannot be neglectedfor short beams, especially for large-amplitude vibrations.     

Nonlinear coupling modeling and dynamics analysis of rotating flexible beams with stretching deformation effect

Dynamic coupling modeling and analysis of rotating beams based on the nonlinear Green-Lagrangian strain are introduced in this work. With the reservation of the axial nonlinear strain, there are more coupling terms for axial and transverse deformations. The discretized dynamic governing equations are obtained by using the finite element method and Lagrange’s equations of the second kind. Time responses are conducted to compare the proposed model with other previous models. The stretching deforma...     

正交各向异性功能梯度圆柱壳的自由振动

利用从弹性力学的三维基本方程导得的状态方程，结合层合近似模型，求得了柱型正交各向异性功能梯度圆柱壳的自由振动频率，给出了数值算例，并与前人结果作了比较，文末讨论了相关参数的影响。     

Non-linear dynamic analysis of symmetric and antisymmetric cross-ply laminated orthotropic thin shells

In this paper, the governing equations for non-linear free vibration of truncated, thin, laminated, orthotropic conical shells using the theory of large deformations with the Karman-Donnell-type of kinematic nonlinearity are derived. Applying superposition principle and Galerkin’s method, these equations are reduced to a time dependent non-linear differential equation. The frequency-amplitude relationship for the laminated orthotropic thin truncated conical shell is obtained using the method of weighted residuals. In the particular case, we can obtain the similar relationships for the single-layer and laminated orthotropic cylindrical shells, also. The influence played by geometrical parameters of the conical shell and physical parameters of the laminate (i.e. material properties, staking sequences and number of layers) on the non-linear vibration behavior of the conical shell is examined. It is noticed that the non-linear vibration of shells is highly dependent on laminate characteristics and, from these observations, it is concluded that specific configurations of laminates should be designed for each kind of application. Present results are compared with available data for special cases.     

变截面弹性直杆纵振动分析的小波——DQ法

在经典微分求积(DQ)法基础上, 根据多分辨分析理论, 以尺度函数为基础构造插 值基函数, 形成了新的微分方程边值问题的求解方法------小波--DQ法, 并应用该方法分析了变截面弹性直杆的纵振动问题, 给出了其频率方程, 计算出了不同参数下固 支--固支, 自由--自由楔形直杆和锥形直杆的固有频率, 数值结果表明该方法是一个简单易行高精度的方法, 该方法可以推广应用于其他力学问题的数值分析.     

Nonlinear vibrations of a sandwich piezo-beam system under piezoelectric actuation

The paper describes the use of active structures technology for deformation and nonlinear free vibrations control of a simply supported curved beam with upper and lower surface-bonded piezoelectric layers, when the curvature is a result of the electric field application. Each of the active layers behaves as a single actuator, but simultaneously the whole system may be treated as a piezoelectric composite bender. Controlled application of the voltage across piezoelectric layers leads to elongation of one layer and to shortening of another one, which results in the beam deflection. Both the Euler–Bernoulli and von Karman moderately large deformation theories are the basis for derivation of the nonlinear equations of motion. Approximate analytical solutions are found by using the Lindstedt–Poincaré method which belongs to perturbation techniques. The method makes possible to decompose the governing equations into a pair of differential equations for the static deflection and a set of differential equations for the transversal vibration of the beam. The static response of the system under the electric field is investigated initially. Then, the free vibrations of such deformed sandwich beams are studied to prove that statically pre-stressed beams have higher natural frequencies in regard to the straight ones and that this effect is stronger for the lower eigenfrequencies. The numerical analysis provides also a spectrum of the amplitude-dependent nonlinear frequencies and mode shapes for different geometrical configurations. It is demonstrated that the amplitude–frequency relation, which is of the hardening type for straight beams, may change from hard to soft for deformed beams, as it happens for the symmetric vibration modes. The hardening-type nonlinear behaviour is exhibited for the antisymmetric vibration modes, independently from the system stiffness and dimensions.

     

充液层合压电圆柱壳的自由振动

推导得到轴向极化的圆柱型正交各向异性压电弹性力学的三维状态方程，采用细分近似方法，得到了状态方程的解，并建立了圆柱壳内外表面边界量之间的传递关系，分析了内充可压缩流体的层合压电圆柱壳的自由振动问题，给出了频率方程的精确形式，并作了具体计算。     

Refined theories may be needed for vibration analysis of structures with overhang

The effect of shear deformation and rotary inertia terms on the free vibration of a beam with overhang was investigated. A recently proposed modified Timoshenko-type equations of motion were used to analyze the vibration of the structure. Two different sets of boundary conditions, with either a fixed or hinged end support, were studied. The results were compared with those obtained for the classical Bernoulli–Euler beam theory. The comparison shows that for a hinged end beam with very long overhang, where the span between the supports is less than one tenth of the overall beam length, the classical theory significantly overestimates the values of the fundamental natural frequencies, even for isotropic shear rigidity. On the other hand, the span effect is reversed for the clamped end beam, for which a relatively significant difference between the classical theory and shear theory results may occur only for a long span. For transversely isotropic beams, the refined theory predictions of the fundamental natural frequencies may be much smaller than those obtained through the rigid shear theory, especially for short span hinged end beams and long span clamped end beams.     

Solution of free vibration equations of semi-rigid connected Reddy–Bickford beams resting on elastic soil using the differential transform method

The literature regarding the free vibration analysis of Bernoulli–Euler and Timoshenko beams under various supporting conditions is plenty, but the free vibration analysis of Reddy–Bickford beams with variable cross-section on elastic soil with/without axial force effect using the Differential Transform Method (DTM) has not been investigated by any of the studies in open literature so far. In this study, the free vibration analysis of axially loaded and semi-rigid connected Reddy–Bickford beam with variable cross-section on elastic soil is carried out by using DTM. The model has six degrees of freedom at the two ends, one transverse displacement and two rotations, and the end forces are a shear force and two end moments in this study. The governing differential equations of motion of the rectangular beam in free vibration are derived using Hamilton’s principle and considering rotatory inertia. Parameters for the relative stiffness, stiffness ratio and nondimensionalized multiplication factor for the axial compressive force are incorporated into the equations of motion in order to investigate their effects on the natural frequencies. At first, the terms are found directly from the analytical solutions of the differential equations that describe the deformations of the cross-section according to the high-order theory. After the analytical solution, an efficient and easy mathematical technique called DTM is used to solve the governing differential equations of the motion. The calculated natural frequencies of semi-rigid connected Reddy–Bickford beam with variable cross-section on elastic soil using DTM are tabulated in several tables and figures and are compared with the results of the analytical solution where a very good agreement is observed.     

Exact Analysis of Curved Beams and Arches with Arbitrary End Conditions: A Hamiltonian State Space Approach

An exact analysis of stress and displacement fields in curved beams and arches subjected to inplane loads is conducted, with emphasis on the end effects. The material considered is cylindrically orthotropic, including transverse isotropy and isotropy as special cases. On the basis of the Hamiltonian state space approach, exact solutions that satisfy any combination of the fixed, free, and sliding-contact end conditions in a pointwise fashion are determined through symplectic eigenfunction expansion. The study allows us to evaluate the conventional solutions based on the elementary theory of curved beams and plane elasticity under simplifying assumptions, thereby, to assess the St. Venant principle as applied to this class of problems.     

Natural frequencies of nonlinear vibration of axially moving beams

Axially moving beam-typed structures are of technical importance and present in a wide class of engineering problem. In the present paper, natural frequencies of nonlinear planar vibration of axially moving beams are numerically investigated via the fast Fourier transform (FFT). The FFT is a computational tool for efficiently calculating the discrete Fourier transform of a series of data samples by means of digital computers. The governing equations of coupled planar of an axially moving beam are reduced to two nonlinear models of transverse vibration. Numerical schemes are respectively presented for the governing equations via the finite difference method under the simple support boundary condition. In this paper, time series of the discrete Fourier transform is defined as numerically solutions of three nonlinear governing equations, respectively. The standard FFT scheme is used to investigate the natural frequencies of nonlinear free transverse vibration of axially moving beams. The numerical results are compared with the first two natural frequencies of linear free transverse vibration of an axially moving beam. And results indicate that the effect of the nonlinear coefficient on the first natural frequencies of nonlinear free transverse vibration of axially moving beams. The numerical results also illustrate the three models predict qualitatively the same tendencies of the natural frequencies with the changing parameters.     

Nonaxisymmetric Vibrations of Discretely Reinforced Inhomogeneous Multilayer Cylindrical Shells under Nonstationary Loads

The equations of nonaxisymmetric vibrations of discretely reinforced multilayer cylindrical shells are analyzed. A refined Timoshenko model of shells and beams is used to analyze elements of an elastic structure. The vibration equations for an inhomogeneous elastic system are derived using the Reissner variational principle. The numerical solver of the dynamic equations is based on the integro-interpolation method used to construct finite-difference schemes for equations with discontinuous coefficients. The dynamic behavior of a five-layer cylindrical shell under distributed nonstationary loading is analyzed     

Natural vibrations of a cantilever thin elastic orthotropic cylindrical shell

The natural vibrations of a cantilever thin elastic orthotropic circular cylindrical shell are studied. Dispersion equations for the determination of possible natural frequencies of cantilever closed shells and open shells with Navier hinged boundary conditions at the longitudinal edges are derived from the classical dynamic theory of orthotropic cylindrical shells. It is proved that there are asymptotic relationships between these problems and the problems for a cantilever orthotropic strip plate and for a cantilever rectangular plate and the eigenvalue problem for a semi-infinite closed orthotropic cylindrical shell with free end and for the same but open shell with Navier hinged boundary conditions at the longitudinal edges. A procedure to identify types of vibrations is presented. Orthotropic cylindrical shells with different radii and lengths are used as an example to find approximate values of the dimensionless natural frequency and damping factor for vibration modes __________ Translated from Prikladnaya Mekhanika, Vol. 44, No. 5, pp. 68–91, May 2008.