Friedel-Crafts sulfonylation in 1-butyl-3-methylimidazolium chloroaluminate ionic liquids.

1-Butyl-3-methylimidazolium chloroaluminate ionic liquids have been employed as an unconventional reaction media and as Lewis acid catalyst for Friedel-Crafts sulfonylation reaction of benzene and substituted benzenes with 4-methyl benzenesulfonyl chloride. The substrates exhibited enhanced reactivity, furnishing almost quantitative yields of diaryl sulfones, under ambient conditions. Studies concerning the effect of Lewis acidity of the ionic liquid on the initial extent of conversion of this reaction has been carried out. (27)Al NMR spectroscopy has been exploited as a tool to investigate the mechanistic details of the reaction. (27)Al NMR spectral studies show the predominance of [Al(2)Cl(7)](-) species in [bmim]Cl-AlCl(3), N = 0.67, acidic ionic liquid in the presence of 4-methyl benzenesulfonyl chloride, and after the reaction with the aromatic hydrocarbon, [AlCl(4)](-) species predominates. This change in speciation of aluminum can be attributed to the interaction of the Lewis acidic species [Al(2)Cl(7)](-) of the ionic liquid with the formed HCl during the sulfonylation reaction, which is evidenced by the control experiment. Preliminary investigations on Friedel-Crafts acylation further substantiate the argument.     

Aggregation behavior of a fluorinated surfactant in 1-butyl-3-methylimidazolium ionic liquids

The aggregation behavior of a fluorinated surfactant (FC-4) was studied by surface tension measurements in 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF 4]) and hexafluorophosphate ([bmim][PF 6]) at various temperatures. A series of surface properties, including adsorption efficiency (p C 20), effectiveness of surface tension reduction (Pi CAC), maximum surface excess concentration (Gamma max) and minimum surface area/molecule (A(min)) at the air-water interface were estimated. By comparing the fluorinated surfactant with traditional surfactants, we deduced that the surface activity of the fluorinated surfactant in ILs was superior to the activity of other surfactants. From the CAC values and their temperature dependence, we estimated the thermodynamic parameters of aggregate formation. The thermodynamic parameters indicate that the aggregate of FC-4 in [bmim][BF 4] is a traditional micelle, while the aggregate of FC-4 in [bmim][PF 6] is nanodroplets composed of FC-4 molecules segregated from the solution phase. These results were further confirmed by (1)H NMR measurements.     

Thermodynamic properties of 1-alkyl-3-methylimidazolium bromide ionic liquids

Heat capacities and enthalpies of phase transitions for a series of 1-alkyl-3-methylimidazolium bromide ionic liquids have been measured by adiabatic calorimetry. Thermodynamic properties of the compounds were calculated in the temperature range of (5 to 370) K. Water was found to have an additive contribution to the heat capacities of [C₄mim]Br in the liquid state above T_fus and in the solid state below 160 K at w(H₂O) ⩽ 5 · 10⁻³.     

Anodic oxidation of silver in 1-butyl-3-methylimidazolium bromide ionic liquid

Electrochemical oxidation of silver in the 1-butyl-3-methylimidazolium bromide ([BMIm]Br) ionic liquid is studied by cyclic voltammetry, chronopotentiometry, chronoammetry, and gravimetry. Two electrode processes irreversibly proceed on the silver electrode in the potential range studied: the formation of compound [BMIm]⁺[AgBr₂]^?, which is soluble in [BMIm]Br, and difficultly soluble AgBr.     

Rotational dynamics of water and benzene controlled by anion field in ionic liquids: 1-butyl-3-methylimidazolium chloride and hexafluorophosphate

The rotational correlation time (tau(2R)) is determined for D(2)O (polar) and C(6)D(6) (apolar) in 1-butyl-3-methylimidazolium chloride ([bmim][Cl]) and hexafluorophosphate ([bmim][PF(6)]) by measuring (2)H (D) nuclear magnetic resonance spin-lattice relaxation time (T(1)) in the temperature range from -20 to 110 degrees C. The tau(2R) ratio of water to benzene (tau(WB)) was used as a measure of solute-solvent attraction. tau(WB) is 0.73 and 0.52 in [bmim][Cl] and [bmim][PF(6)], respectively, whereas the molecular volume ratio is as small as 0.11. The slowdown of the water dynamics compared to the benzene dynamics in ionic liquids is interpreted by the Coulombic attractive interaction between the polar water molecule and the anion. As for the anion effect, the rotational dynamics of water solvated by Cl(-) is slower than that solvated by PF(6) (-), whereas the rotational dynamics of benzene is similar in the two ionic liquids. This is interpreted as an indication of the stronger solvation by the anion with a larger surface charge density. The slowdown of the water dynamics via Coulombic solvation is actually significant only at water concentrations lower than approximately 9 mol dm(-3) at room temperature, and it is indistinguishable at temperatures above approximately 100 degrees C. The quadrupolar coupling constants determined for D(2)O and C(6)D(6) in the ionic liquids were smaller by a factor of 2-3 than those in the pure liquid state.     

Photoinduced electron-transfer reactions in two room-temperature ionic liquids: 1-butyl-3-methylimidazolium hexafluorophosphate and 1-octyl-3-methylimidazolium hexafluorophosphate

Photoinduced electron transfer in two room-temperature ionic liquids, 1-butyl-3-methylimidazolium hexafluorophosphate (BMIM-PF(6)) and 1-octyl-3-methylimidazolium hexafluorophosphate (OMIM-PF(6)), has been investigated using steady-state fluorescence quenching of 9,10-dicyanoanthracene with a series of single electron donors. From these fluorescence quenching rates, reorganization energy (lambda) values and k(diff) values can be derived from a Rehm-Weller analysis. In many cases, these fluorescence quenching reactions occur at rates larger than what would be expected based on the Smoluchowski equation. In addition, lambda values of 10.1 kcal/mol and 16.3 kcal/mol for BMIM-PF(6) and OMIM-PF(6), respectively, have been determined.     

Nucleophilicity in ionic liquids. 3. Anion effects on halide nucleophilicity in a series of 1-butyl-3-methylimidazolium ionic liquids

We have continued the study of halide nucleophilicity in ionic liquids, concentrating on the effect of changing the anion ([BF(4)](-), [PF(6)](-), [SbF(6)](-), [OTf](-), and [N(Tf)(2)](-)) when the cation is [bmim](+) (where bmim = 1-butyl-3-methylimidazolium). It was found that the nucleophilicities of all the halides were lower in all of the ionic liquids than in dichloromethane. Changing the anion affected the order of halide nucleophilicity, e.g., in [bmim][BF(4)] the order of nucleophilicity was Cl(-)>Br(-)>I(-) while in [bmim][N(Tf)(2)] the order was Cl(-)相似文献   

Characterising the electronic structure of ionic liquids: an examination of the 1-butyl-3-methylimidazolium chloride ion pair

In this paper we analyse the electronic properties of gas-phase 1-butyl-3-methylimidazolium Cl ion pairs, [C(4)C(1)im]Cl, in order to deepen our understanding of ionic liquids in general. Examination of charge densities, natural bond orbitals (NBO), and delocalised molecular orbitals computed at the B3LYP and MP2/6-31(++)G(d,p) levels have enabled us to explain a number of experimental phenomena: the relative acidity of different sites on the imidazolium ring, variations in hydrogen-bond donor and acceptor abilities, the apparent contradiction of the hydrogen-bond-donor parameters for different types of solute, the low probability of finding a Cl(-) anion at the rear of the imidazolium ring and the expansion of the imidazolium ring in the presence of a strong hydrogen-bond acceptor. The unreactive but coordinating environment and large electrochemical window have also been accounted for, as has the strong electron-donating character of the carbon atoms to the rear of the ring in associated imidazolylidenes. The electronic structure of the [C(4)C(1)im](+) cation is best described by a C(4)==C(5) double bond at the rear, and a delocalised three-centre 4 e(-) component across the front (N(1)-C(2)-N(3)) of the imidazolium ring; delocalisation between these regions is also significant. Hydrogen-bond formation is driven by Coulombic stabilisation, which compensates for an associated destabilisation of the electronic part of the system. Interactions are dominated by a large positive charge at C(2) and the build up of pi-electron density above and below the ring, particularly that associated with the double bond between C(4) and C(5). The NBO partial charges have been computed and compared with those used in a number of classical simulations.     

Triggering phase disengagement of 1-alkyl-3-methylimidazolium chloride ionic liquids by using inorganic and organic salts

This study deals with the influence of different inorganic and organic salts made up with sodium, potassium and ammonium cations to induce phase segregation in aqueous solutions of C₈C₁imCl and C₁₀C₁imCl at T = 298.15 K. The experimental solubility values are described by means of four empirical equations and the suitability of the models was analysed in the light of the standard deviation. The capability of the above mentioned salts to further phase de-mixing is discussed on the basis of their different molar Gibbs free energy of hydration (Δ_hydG), molar entropy of hydration (Δ_hydS) and pH. The efficiency of the separation was evaluated by determining the tie-lines, and these experimental values were fitted to three known models such as Bancroft, Othmer–Tobias and modified Setschenow equations.     

Aggregation behavior of pluronic triblock copolymer in 1-butyl-3-methylimidazolium type ionic liquids

Three amphiphilic poly(oxyethylene)-poly(oxypropylene)-poly(oxyethylene) ethers triblock copolymers, denoted Pluronic L61 (PEO3PPO30PEO3), Pluronic L64 (PEO13PPO30PEO13), and Pluronic F68 (PEO79PPO30PEO79) were shown to aggregate and form micelles in ionic liquids (ILs) 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4) and 1-butyl-3-methylimidazolium hexafluorophosphate (bmimPF6). The surface tension measurements revealed that the dissolution of the copolymers in ILs depressed the surface tension in a manner analogous to aqueous solutions. The cmcs of three triblock copolymers increase following the order of L61, L64, F68, suggesting that micellar formation was driven by solvatophobic effect. cmc and gamma cmc decrease with increasing temperature because hydrogen bonds between ILs and hydrophilic group of copolymers decrease and accordingly enhance the solvatophobic interaction. Micellar droplets of irregular shape with average size of 50 nm were observed. The thermodynamic parameters DeltaGm0, DeltaHm0, DeltaSm0 of the micellization of block copolymers in bmimBF4 and bmimPF6 were also calculated. It was revealed that the micellization is a process of entropy driving, which was further confirmed by isothermal titration calorimetry (ITC) measurements.     

Bromination of alkylbenzenes in 1-butyl-3-methylimidazolium bromide and its dibromide complex

Alkylbenzenes were subjected to bromination with molecular bromine using 1-butyl-3-methylimidazolium bromide as solvent. A complex of 1-butyl-3-methylimidazolium bromide with bromine was synthesized. It ensured bromination of alkylbenzenes with no bromine and solvent. The results of bromination in binary solvents and ionic liquids, 1-butyl-3-methylimidazolium bromide and tribromide were compared. The bromination of ethylbenzene with 1-butyl-3-methylimidazolium tribromide was accompanied by formation of a considerable amount of α-bromoethylbenzene, which is not typical of electrophilic aromatic substitution process.     

The physicochemical properties of the low-temperature ionic liquid silver bromide-1-butyl-3-methylimidazolium bromide

The physicochemical properties of the low-temperature ionic liquid based on 1-butyl-3-methylimidazolium bromide (BMImBr) and silver bromide were studied. Differential scanning calorimetry, Fourier transform IR spectroscopy, densimetry, viscometry, and conductometry measurements were performed to determine the dependences of the parameters under study on the concentration of AgBr. It was shown that the temperature and concentration behavior of the physicochemical properties of BMImBr-AgBr melts characterized the interaction between the system components with the formation of complex particles.     

Reaction mechanism of Cl2 and 1-alkyl-3-methylimidazolium chloride ionic liquids

Systems containing 1-alkyl-3-methylimidazolium chloride ionic liquid and chlorine gas were investigated. Using relativistic density functional theory, we calculated the formation mechanism of trichloride and hydrogen dichloride anions in an Emim(+)Cl(-) + Cl(2) system. Emim(+)Cl(3)(-) forms without energy barriers. The more stable species ClEmim(+)HCl(2)(-) forms through chlorine substitution. Substitution of a H on the imidazolium ring is much easier than substitution on the alkyl side chains. Infrared, Raman, ESI-MS, and (1)H NMR spectra were measured for EmimCl, BmimCl, and DmimCl with and without Cl(2) gas. The coexistence of Cl(3)(-) and HCl(2)(-), as well as chlorine-substituted cations, was confirmed by detection of their spectroscopic signals in the Cl(2) added ionic liquids. Cl substitution appears less serious for cations with longer side chains.     

The influence of water on the physicochemical characteristics of 1-butyl-3-methylimidazolium bromide ionic liquid

A modified synthesis of 1-butyl-3-methylimidazolium bromide (BMImBr) was suggested and performed, and some physicochemical properties of the product containing 0.64–13.6 wt % water were determined. Water increased the electrical conductivity and decreased the viscosity and melting point of the substance but weakly influenced its density. Water in amounts of 5–8 wt % (45–50 mol %) caused structural changes. The BMImBr · 0.5H₂O crystal hydrate was found to be stable thermodynamically.     

Electrochemical behavior of uranyl in ionic liquid 1-butyl-3-methylimidazolium chloride mixture with water

Electrochemical behaviors of U(VI) in 1-butyl-3-methylimidazolium chloride (C₄MimCl) with various water contents investigated by chronopotentiometry and cyclic voltammetry. The electrochemical reduction of U(VI) was identified to follow two processes: a lower valence intermediate U(V) was initially formed at the potential of ca. ?0.2 V(vs. Ag wire). Then, further deposition of UO₂ was followed at around ?0.8 V. Little amount of water (1–4 wt%) in C₄MimCl, however, has an effect on the U(VI) reduction by changing the current density of the redox reaction and the diffusion coefficient of U(VI) in C₄MimCl. The deposited product by potentiostatic electrolysis on the surface of stainless steel electrode was characterized by the scanning electron microscopy (SEM), energy dispersive X-ray (EDX) and X-ray diffraction (XRD) methods. Although the electrodeposited black film was amorphous, the electrochemical reduced product of U(VI) can be still confirmed to be UO₂ by XRD after the crystallization of the amorphous deposits at 1,073 K in nitrogen atmosphere.     

Electrodeposition of Ni-Mg alloys from 1-butyl-3-methylimidazolium chloride/glycerin eutectic-based ionic liquid

Journal of Solid State Electrochemistry - The electrodeposition of Ni-Mg alloys in 1-butyl-3-methylimidazolium chloride/glycerin (BMIC/GL, 1:1 M ratio) eutectic-based ionic liquid...     

Corrosion behaviors of materials in aluminum chloride–1-ethyl-3-methylimidazolium chloride ionic liquid

The corrosion properties of carbon steel (CS), 304 stainless steel (304 SS), and pure titanium (Ti) are first studied in aluminum chloride–1-ethyl-3-methylimidazolium chloride ionic liquid (IL). An active-to-passive transition behavior was clearly observed for CS. The 304 SS exhibited the best stability among the materials; no considerable corrosion was recognized even in this high-chloride environment. In contrast, although Ti resists corrosion in ambient environments, it was not passivated in the IL and became severely corroded under an anodic applied potential. The material corrosion behaviors and mechanisms in the non-aqueous, low-oxygen, and high-halogen-containing IL are completely different from those in traditional aqueous solutions.     

Homogeneous tritylation of cellulose in 1-butyl-3-methylimidazolium chloride

1-Alkyl-3-methylimidazolium-based ionic liquids, having chloride as a counter ion, were studied for cellulose solubility; and the influence of different alkyl chain lengths was also investigated. The alkyl chain length was incrementally varied from ethyl to decyl to determine structure-dissolution properties; a distinct odd-even effect was observed for short chain lengths. In addition, the tritylation of cellulose was performed in 1-butyl-3-methylimidazolium chloride using pyridine as base. The influences of reaction time and the ratio of trityl chloride per cellulose monomer unit on the degree of substitution were investigated in detail by elemental analysis and 1H NMR spectroscopy. A DS of around 1 was obtained after 3 h reaction time using a six fold excess of trityl chloride.     

Electrochemical behavior of copper in 1-butyl-3-methylimidazolium bromide-copper(II) bromide binary ionic liquid

The methods of potentiometry, voltammetry, and gravimetry are used to study the electrochemical behavior of copper in the BMImBr-CuBr₂ ionic liquid (0?C30.5 mol % CuBr₂). It is shown that electrochemical reduction of copper(II) occurs irreversibly, in two one-electron stages (transfer coefficient ?? of the cathodic process are 0.58 and 0.46, accordingly, for the first and second stages). Diffusion coefficients of copper-containing ions D _Cu(II) at 60°C are 1.3 × 10^?7 and 1.6 × 10^?7 cm² s^?1 in melts with the CuBr₂ concentration of 0.1 and 1.5 mol kg^?1 of BMImBr, accordingly. High (up to 98%) deposition efficiency and high-quality copper deposit can be obtained in the potential range of ?2.0 to ?1.8 V (vs. a platinum quasireference electrode). It is found that the copper corrosion rate grows at an increase in the CuBr₂ concentration in the binary melt and is comparable with that in aqueous solutions of H₂SO₄-CuSO₄.