New Ru(II)–dmso complexes with heterocyclic hydrazone ligands towards cancer chemotherapy

The synthesis and characterization of ruthenium(II) complexes, [RuCl₂(dmso)₂(bfmh)] (1; dmso = dimethyl sulfoxide, bfmh = benzoic acid furan-2-ylmethylene-hydrazide), [RuCl₂(dmso)₂(btmh)](2; btmh = benzoic acid thiophen-2-ylmethylene-hydrazide), [RuCl₂(dmso)₂(bfeh)](3; bfeh = benzoic acid (1-furan-2-yl-ethylidene)-hydrazide) and [RuCl₂(dmso)₂(bpeh)](4; bpeh = benzoic acid (1-pyridin-2-yl-ethylidene)-hydrazide) are described. The ligands, when treated with either cis-[RuCl₂(dmso)₄] or trans(Cl)–[RuCl₂(dmso)₂(bpy)], resulted in the same products. This has been confirmed by IR spectra and single crystal X-ray diffraction studies. The redox behaviors of the complexes have been found to be strongly dependent on the electronic nature of the moieties present in the hydrazone ligands. The binding of the complexes to Herring sperm DNA has been studied by absorption titration and cyclic voltammetry. But, due to the random change in the absorption on the addition of DNA, only a qualitative result rather than a quantitative result has been obtained. All the complexes have been found to bind DNA through different modes to different extents. The antibacterial properties of the ligands and the complexes have been studied against five pathogenic bacteria and also the minimum inhibitory concentrations (MIC) of all the ligands and complexes 2 and 4 have been evaluated.     

Asymmetric transfer hydrogenation of ferrocenyl ketones: a new simple route to chiral ferrocenyl alcohols

The asymmetric transfer hydrogenation (ATH) of ferrocenyl ketones, such as FcC(O)CH₂Y [Fc = ferrocenyl, Y = H (1a), CH₃ (1b), Cl (1c) or N₃ (1d)] has been carried out using the Noyori/Ikariya catalysts [(−)-(1R,2S)-ephedrine] or N-tosyl-(1R,2R)-diphenylethylenediamine [(R,R)-TsDPEN] as chiral ligands combined with [RuCl₂(η⁶-benzene)]₂ and 2-PrOH or HCO₂H–Et₃N as the hydrogen sources, respectively. The best results were achieved with the [(R,R)-TsDPEN–Ru^IIHCO₂H–Et₃N] catalytic system, which produced the ferrocenylalcohols (R)-2a, (R)-2c, and (R)-2d in good yields and excellent enantiomeric excesses (>98% ee).     

Catalytic oxidation of alcohols to carbonyl compounds with hydrogen peroxide using dinuclear iron complexes

Oxidation of primary and secondary alcohols has been studied in the presence of [Fe(ind)Cl]₂O (1) and [Fe₂(OMe)₂(PAP)Cl₄] (2) (indH = 1,3-bis(2′-pyridylimino)isoindoline; PAP = 1,4-di(2′-pyridyl)aminophthalazine) as catalysts using hydrogen peroxide as primary oxidant. The complexes were found to be suitable catalysts for the oxidation of alcohols to the corresponding carbonyl compounds in acetone as solvent. The reactivity of the alcohols is in the order primary < secondary < cyclic secondary < aromatic. The reaction mechanism in the case of 1 probable involves an iron-based oxidant, while in the case of 2 a free-radical mechanism is suggested.     

Tris-chelate complexes with chiral ligands: In search of diastereoisomeric selectivity with remote stereogenic centres

The chiral ligands, 4,4′-bis{(1S,2R,4S)-(−)-bornyloxy}-2,2′-bipyridine, (1S,2R,4S)-1, and 4,4′-bis{(1R,2S,4R)-(+)-bornyloxy}-2,2′-bipyridine, (1R,2S,4R)-1, have been prepared and characterized by spectroscopic techniques and, for (1S,2R,4S)-1, by single crystal X-ray diffraction. Despite the use of enantiomerically pure ligands, the formation of the complexes [Fe((1S,2R,4S)-1)₃]²⁺, [Ru((1S,2R,4S)-1)₃]²⁺, [Ru((1S,2R,4S)-1)(bpy)₂]²⁺ and [Ru((1R,2S,4R)-1)(bpy)₂]²⁺ proceeds without preference for either the Δ or Λ-diastereoisomers.     

N,N′-bis(substituted-phenyl)oxamides and their dinuclear pentacoordinate nickel(II) complexes

The preparation, spectroscopic characterization and magnetic study of N,N′-bis(substituted-phenyl)oxamidate-bridged nickel(II) dinuclear complexes of formula {[Ni(N₃-mc)]₂(μ-CONC₆H₄-X)}(PF₆)₂ (N₃-mc = 2,4,4-trimethyl-1,5,9-triazacyclo-dodec-1-ene (Me₃-N₃-mc) or 2,4,4,9-tetramethyl-1,5,9-triazacyclododec-1-ene (Me₄-N₃-mc), X = 2-Cl, 4-Cl, 2-OCH₃, 4-OCH₃) are reported. These paramagnetic nickel(II) complexes have been characterized by both one- and two-dimensional (COSY) ¹H NMR techniques. The COSY spectrum of 5 has allowed to achieve the assignment of the phenyl protons of the N,N′-diphenyloxamidate. The crystal structures of [Ni(Me₃-N₃-mc)(μ-CONC₆H₄-4-Cl)]₂(PF₆)₂ (6), [Ni(Me₃-N₃-mc)(μ-CONC₆H₄-4-OMe)]₂(PF₆)₂ (8) and [Ni(Me₄-N₃-mc)(μ-CONC₆H₄-2-Cl)]₂(PF₆)₂ (9) have been determined and their magnetic properties have been studied. The value of magnetic coupling between the two nickel(II) ions across the oxamidate bridge [J = − 37.6 (6), −39.9 (8) and −39.7 cm⁻¹ (9)] is sensitive to the distortion of the coordination sphere of the metal ions and the topology of the molecular bridge.     

Synthesis of mer-[RuCl3(DMSO)(bpy)], reactivity and electrochemistry of mer-[RuCl3(DMSO)(bpy)] and mer-[RuCl3(TMSO)(bpy)] complexes

[H(DMSO)₂][trans-RuCl₄(DMSO)₂] (1) reacts with 2,2′-bipyridine in ethanol at room temperature resulting in the formation of a major compound, mer-[RuCl₃(DMSO)(bpy)] (bpy = 2,2′-bipyridine) 3 and a known minor compound, cis-[RuCl₂(DMSO)₄] (4). The compounds 3 and 4 are formed via an anticipated intermediate mer-[RuCl₃(DMSO)₃] (2). The reaction of 3 and mer-[RuCl₃(TMSO)(bpy)] (5) with small molecules like imidazole, carbon monoxide and KSCN yield, mer-[RuCl₃(bpy)(im)] · 2DMSO (im = imidazole) (6) and cis-[RuCl₂(TMSO)(CO)(bpy)] (7), cis-[RuCl₂(DMSO)(CO)(bpy)] (8) and K[RuCl₃(bpy)(SCN)] (9), respectively. The formations of 3, 6 and 7 have been authenticated by single crystal structure determinations. Compound 6 is formed by the substitution of DMSO or TMSO from 3 and 5, respectively, whereas 7 and 8 are formed by unprecedented one-electron reductions of 5 and 3. The reactions of 3 and 5 with KSCN resulted in the same compound, K[RuCl₃(NCS)(bpy)] (9). DFT calculations were performed to distinguish whether the thiocyanate ligand is bound to ruthenium through S or N. In the ruthenium bipyridine systems, the HOMO contains ruthenium d-orbitals and the LUMO is typically π^*-orbitals of the bipyridine ring. Complexes 3, 6 and 7 are redox active in acetone and DMSO solvent showing prominent a reduction peak and corresponding oxidation peak.     

Molecular structure and electrochemical properties of the Pt complex of 1,1′-bis(methylthio)ferrocene and the Pd complexes of 1,4,7-trithia[7]- and 1,5,9-trithia[9] (1,1′)ferrocenophanes

Molecular structures of (triphenylphosphine) [1,1′-bis-(methylthio)ferrocene-S,S′,Fe]Pt(BF₄)₂ (1), (1,5,9-trithia[9]ferrocenophane-S,S′,S″,Fe)Pd(BF₄)₂ (2), and (acetonitrile)(1,4,7-trithia[7]ferrocenophane-S,S′,S″,Fe)Pd(BF₄)₂ (3) were determined by X-ray analyses. The Pt in 1 and the Pd atom in 2 have a somewhat distorted square-planar geometry including the Fe atom of the ferrocene moiety, while the Pd atom in 3 is coordinated by one equivalent of acetonitrile and takes a distorted tetragonal-pyramidal geometry. The distances of the Fe---M bond (M = Pd, Pt) in 1–3 are 2.851(2), 2.827(2), and 3.0962(8) Å, respectively. Cyclic voltammetry of 1–3 gave no reversible wave, but afforded some information supporting the presence of a dative bond.     

Synthesis, structures and reactivity of triosmium clusters containing terminal pyrazines, bridging hydroxy and methoxycarbonyl ligands

Four triosmium carbonyl clusters bearing terminal pyrazines, bridging hydroxy and methoxycarbonyl ligands of general formula [Os₃(CO)₉(μ-OH)(μ-OMeCO)L] (1, L = pyrazine; 2, L = 2-methylpyrazine; 3, L = 2,3-dimethylpyrazine; 4, L = 2,3,5-trimethylpyrazine) were synthesized by the reactions of [Os₃(CO)₁₂] with the corresponding pyrazine derivatives and water in the presence of a methanolic solution of Me₃NO in moderate yields. Compounds [Os₃(CO)₉(μ-OH)(μ-OMeCO)L] react with a series of two electron donor ligands, L′ at ambient temperature to give [Os₃(CO)₉(μ-OH)(μ-OMeCO)L′] (5, L′ = PPh₃; 6, L′ = P(OMe)₃; 7, L′ = ^tBuNC; 8, L′ = C₅H₅N) in good yields by the displacement of the pyrazine ligands. This implies that the pyrazine ligands in 1–4 are relatively labile. Compounds 2, 3, 4, and 8 were characterized by single crystal X-ray diffraction analyses. All the four compounds possess two metal–metal bonds and a non-bonded separation of two osmium atoms defined by Os(1)Os(3), which are simultaneously bridged by OH and MeOCO ligands and a heterocyclic ligand is terminally coordinated to one of the two non-bonded osmium atoms.     

Sterically demanding cyclopentadienyl chemistry: synthesis of iron and zirconium complexes of 1-phenyl-3-methyl-4,5,6,7-tetrahydroindenyl

Reaction of phenyl magnesium bromide with the ,β-unsaturated ketone 3-methyl-2,3,4,5,6,7-hexahydroind-8(9)-en-1-one, followed by an aqueous work-up, generates the pro-chiral tetra-substituted cyclopentadiene, 1-phenyl-3-methyl-4,5,6,7-tetrahydroindene, Cp^‡H, a precursor to the η⁵-cyclopentadienyl ligand in (Cp^‡)₂Fe and [(Cp^‡)Fe(CO)]₂(μ-CO)₂. Both complexes were generated as mixtures of rac-(RR and SS)- and meso-(RS)-isomers, and in either case pure meso-isomer was isolated by crystallisation and characterised by single crystal X-ray structure, both molecules having crystallographic C_i symmetry. Reduction with Na/Hg cleaves meso-(RS)-[(Cp^‡)Fe(CO)]₂(μ-CO)₂ and the resulting mixture of (R)- and (S)-[(Cp^‡)Fe(CO)₂]⁻ anions reacts with MeI to give racemic (Cp^‡)Fe(CO)₂Me, which was characterised by the X-ray crystal structure. The Cp^‡ ligand is more electron donating than (η-C₅H₅) as revealed by the reduction potential of the (Cp^‡)₂Fe⁺/(Cp^‡)₂Fe couple, E°=−0.127 V (vs. Ag  AgCl). Reaction of LiCp^‡ with ZrCl₄ yields the zirconocene dichloride [Zr(Cp^‡)₂Cl₂] as mixture of rac- and meso-isomers, from which pure rac-isomer is obtained as a mixture of RR and SS crystals by recrystallisation. The reaction of rac-[Zr(Cp^‡)₂Cl₂] with LiMe gives rac-[Zr(Cp^‡)₂Me₂]. The structures of RR-[Zr(Cp^‡)₂Cl₂] and rac-[Zr(Cp^‡)₂Me₂] have been determined by X-ray diffraction. The structural studies reveal the influence of the bulky substituted cyclopentadienyl ligand on the metal---Cp^‡ distances and other metric parameters.     

Synthesis and thermodynamic properties of a metal-organic framework: [LaCu6(μ-OH)3(Gly)6im6](ClO4)6

A metal-organic complex, which has the potential property of absorbing gases, [LaCu₆(μ-OH)₃(Gly)₆im₆](ClO₄)₆ was synthesized through the self-assembly of La³⁺, Cu²⁺, glycine (Gly) and imidazole (Im) in aqueous solution and characterized by IR, element analysis and powder XRD. The molar heat capacity, C_p,m, was measured from T = 80 to 390 K with an automated adiabatic calorimeter. The thermodynamic functions [H_T − H_298.15] and [S_T − S_298.15] were derived from the heat capacity data with temperature interval of 5 K. The thermal stability of the complex was investigated by differential scanning calorimetry (DSC).     

Ru- and Fe-based N,N′-bis(2-pyridylmethyl)-N-methyl-(1S,2S)-1,2-cyclohexanediamine complexes immobilised on mesoporous MCM-41: Synthesis, characterization and catalytic applications

Protected mesoporous MCM-41 phases were synthesized by grafting of the ligand, (1S,2S)-N,N′-bis-pyridin-2-ylmethyl-cyclohexane-1,2-diamine (L₂Me), through the reactive 3-chloropropyltrimethoxysilane (3-CPTMS) group and designated as L₂Me-MCM-41. Subsequently, RuCl₃ and Fe(BF₄)₂ or Fe(CF₃SO₃)₂ were added to the heterogenized L₂Me-MCM-41 for complexation and designated as M-L₂Me-MCM-41 (M = Ru and Fe). All samples were characterized in detail using XRD, N₂ sorption isotherm, FT-IR, TGA-DTA, XPS, UV–vis, solid state ¹³C NMR, EPR and elemental analysis, etc. The XRD and sorption measurements of the catalyst confirmed the structural integrity of the mesoporous hosts and the spectroscopic characterization techniques proved the successful anchoring of the metal complexes over the modified mesoporous support. The screening of catalyst M-L₂Me-MCM-41 was done for the oxidation reaction of thioanisole (methyl phenyl sulphide) using H₂O₂ as an oxidant. The Ru-L₂Me-MCM-41 and Fe-L₂Me-MCM-41 catalysts show higher activities and turnover numbers and exhibit enantiomeric excess comparable to the homogeneous catalysts, Ru-L₂(Me)₂ and Fe-L₂(Me)₂. Furthermore, Fe-L₂Me-MCM-41 and Fe-L₂(Me)₂ were also found active in the epoxidation of styrene. These results indicate that metal complexes are confined into the pore of the material which play a major role in the reaction.     

Enantioselektive Katalyse VII. Komplexe von (P(R,S),3R,4R,P′(R,S))-3,4-Bis(phenylphosphino)pyrrolidinen. Die Darstellung optisch reiner 1,2-Bisphosphanliganden mit vier Stereozentren, die zusätzliche funktionnelle Gruppen enthalten

Diastereomeric mixtures of the palladium, the platinum, and the rhodium complexes were prepared from [P(R,S),3R,4R,P′(R,S)]-3,4-bis(phenylphosphino)pyrrolidine (1a). The phosphorus atoms in bis[(P(R,S),3R,4R,P′(R,S))-1-(t-butoxycarbonyl)-3,4-bis(phenylphosphino)pyrrolidine-P,P′]dihalogenopalladium (2) can be alkylated stereoselectively with iodomethane. The P---H bonds in 2 open epoxides, and add to Michael systems, to give new ligands, which can be split off from the palladium with cyanide. The three isomerically pure [(PR,3R,4R,P′R)(PS,3R,4R,P′S)(PR,3R,4R,P′S)]-1-(t-butoxycarbonyl)-3,4- bis[(2-cyanoethyl)phenylphosphino]pyrrolidines were prepared via the neutral diiodopalladium complexes. [(PS,3R,4R,P′S)1-(t-butoxycarbonyl)-3,4-bis[(2-cyanoethyl)phenylphosphino]pyrrolidine-P,P′]diiodopalladium(II) (14-1) was characterised by X-ray crystallography.     

Preparation and characterization of ruthenium(II), rhodium(III) and iridium(III) complexes of isocyanide bearing the azo group

Reactions of [(η⁶-arene)RuCl₂]₂ (1) (η⁶-arene=p-cymene (1a), 1,3,5-Me₃C₆H₃ (1b), 1,2,3-Me₃C₆H₃ (1c) 1,2,3,4-Me₄C₆H₂(1d), 1,2,3,5-Me₄C₆H₂ (1e) and C₆Me₆ (1f)) or [Cp*MCl₂]₂ (M=Rh (2), Ir (3); Cp*=C₅Me₅) with 4-isocyanoazobenzene (RNC) and 4,4′-diisocyanoazobenzene (CN–R–NC) gave mononuclear and dinuclear complexes, [(η⁶-arene)Ru(CNC₆H₄N=NC₆H₅)Cl₂] (4a–f), [Cp*M(CNC₆H₄N=NC₆H₅)Cl₂] (5: M=Rh; 6: M=Ir)_, [{(η⁶-arene)RuCl₂}₂{μ-CNC₆H₄N=NC₆H₄NC}] (8a–f) and [(Cp*MCl₂)₂(μ-CNC₆H₄N=NC₆H₄NC)}] (9: M=Rh; 10: M=Ir)_, respectively. It was confirmed by X-ray analyses of 4a and 5 that these complexes have trans-forms for the ---N=N--- moieties. Reaction of [Cp*Rh(dppf)(MeCN)](PF₆)₂ (dppf=1,1′-bis (diphenylphosphino)ferrocene) with 4-isocyanoazobenzene gave [Cp*Rh(dppf)(CNC₆H₄N=NC₆H₅)](PF₆)₂ (7), confirmed by X-ray analysis. Complex 8b reacted with Ag(CF₃SO₃), giving a rectangular tetranuclear complex 11b, [{(η⁶-1,3,5-Me₃C₆H₃)Ru(μ-Cl}₄(μ-CNC₆H₄N=NC₆H₄NC)₂](CF₃SO₃)₄ bridged by four Cl atoms and two μ-diisocyanoazobenzene ligands. Photochemical reactions of the ruthenium complexes (4 and 8) led to the decomposition of the complexes, whereas those of 5, 7, 9 and 10 underwent a trans-to-cis isomerization. In the electrochemical reactions the reductive waves about −1.50 V for 4 and −1.44 V for 8 are due to the reduction of azo group, [---N=N---]→[---N=N---]²⁻. The irreversible oxidative waves at ca. 0.87 V for the 4 and at ca. 0.85 V for 8 came from the oxidation of Ru(II)→Ru(III).     

High-field EPR investigation of a series of mononuclear Mn(II) complexes doped into Zn(II) hosts

The five-coordinate mono-halide mononuclear Zn(II) complexes [Zn(tpa)X]⁺ (tpa = tris(2-pyridylmethyl)amine; X = I ([Zn(tpa)I]I; 1a), Br ([Zn(tpa)Br](ZnBr₄)_0.5; 2a) and Cl ([Zn(tpa)Cl](ZnCl₄)_0.5; 3a)) and the six-coordinate mononuclear complex [Zn(tpa)(NCS)₂] (4a) have been synthesized and characterized by X-ray crystallography. The [Zn(tpa)X]⁺ complexes doped with the corresponding [Mn(tpa)X₂] complexes (X = I (1b), Br (2b) and Cl (3b)) have been synthesized and their electronic properties investigated by multifrequency high field EPR (HF-EPR) (95–285 GHz). The magnetically diluted conditions allow the determination of the hyperfine coupling constant A (A = 68.10⁻⁴ cm⁻¹ for 1b–3b). The zero-field splitting parameters (D and E) found for 1b–3b are comparable to those found for neat samples of the [Mn(tpa)X₂] complexes (1b: D = 0.635 cm⁻¹, E/D = 0.189; 2b: D = 0.360 cm⁻¹, E/D = 0.192; 3b: D = 0.115 cm⁻¹, E/D = 0.200). The efficacy of using multifrequency EPR under dilute conditions to precisely determine spin Hamiltonian parameters is discussed.     

Synthesis, characterization and magnetic properties of novel μ-isophthalato oxovanadium(IV) binuclear complexes

Four novel oxovanadium(IV) binuclear complexes have been synthesized, namely [(VO)₂(IPHTA) (L)₂SO₄ (L denotes 2,2′-bipyridine (bpy); 1,10-phenanthroline (phen); 4,4′-dimethyl-2,2′-bipyridine (Me₂bpy) and 5-nitro-1,10-phenanthroline (NO₂-phen)), where IPHTA is the isophthalate dianon. Based on elemental analyses, molar conductivity measurements, IR and electronic spectra studies, it is proposed that these complexes have IPHTA-bridged structures and consist of two vanadium(IV) atoms in a square-pyramidal environment. The complexes [(VO)₂(IPHTA)(Me₂bpy)₂]SO₄ (1) and [(VO)₂(IPHTA)(bpy)₂]SO₄ (2) were characterized by variable temperature magnetic susceptibility (4–300 K) and the data could be well fitted by the least-squares method to a susceptibility equation derived from the spin Hamiltonian operator, . The exchange integral, J, was found to be −26.8 cm⁻¹ for (1) and −31.0 cm⁻¹ for (2). These results are commensurate with antifferomagnetic interactions between two oxovanadium(IV) ions within each molecule. The influence of different terminal ligands on magnetic interactions between the metals of this kind of complexes is also discussed.     

Influence of electronic and steric effects on stability constants and electrochemical reversibility of divalent ion complexes with glycine and sarcosine. A glass electrode potentiometric, sampled direct current polarographic, virtual potentiometric, and molecular modelling study

Cd^II complexes with glycine (gly) and sarcosine (sar) were studied by glass electrode potentiometry, direct current polarography, virtual potentiometry, and molecular modelling. The electrochemically reversible Cd^II–glycine–OH labile system was best described by a model consisting of M(HL), ML, ML₂, ML₃, ML(OH) and ML₂(OH) (M = Cd^II, L = gly) with the overall stability constants, as log β, determined to be 10.30 ± 0.05, 4.21 ± 0.03, 7.30 ± 0.05, 9.84 ± 0.04, 8.9 ± 0.1, and 10.75 ± 0.10, respectively. In case of the electrochemically quasi-reversible Cd^II–sarcosine–OH labile system, only ML, ML₂ and ML₃ (M = Cd^II, L = sar) were found and their stability constants, as log β, were determined to be 3.80 ± 0.03, 6.91 ± 0.07, and 8.9 ± 0.4, respectively. Stability constants for the ML complexes, the prime focus of this work, were thus established with an uncertainty smaller than 0.05 log units. The observed departure from electrochemical reversibility for the Cd–sarcosine–OH system was attributed mainly to the decrease in the transfer coefficient . The MM2 force field, supplemented by additional parameters, reproduced the reported crystal structures of diaqua-bis(glycinato-O,N)nickel(II) and fac-tri(glycinato)-nickelate(II) very well. These parameters were used to predict structures of all possible isomers of (i) [Ni(H₂O)₄(gly)]⁺ and [Ni(H₂O)₄(sar)]⁺; and (ii) [Ni(H₂O)₃(IDA)] and [Ni(H₂O)₃(MIDA)] (IDA = iminodiacetic acid, MIDA = N-methyl iminodiacetic acid) by molecular mechanics/simulated annealing methods. The change in strain energy, ΔU_str, that accompanies the substitution of one ligand by another (ML + L′ → ML′ + L), was computed and a strain energy ΔU_str = +0.28 kcal mol⁻¹ for the reaction [Ni(H₂O)₄(gly)]⁺ + sar → [Ni(H₂O)₄(sar)]⁺ + gly was found. This predicts the monoglycine complex to be marginally more stable. By contrast, for the reaction [Ni(H₂O)₃IDA] + MIDA → [Ni(H₂O)₃MIDA] + IDA, ΔU_str = −0.64 kcal mol⁻¹, and the monoMIDA complex is predicted to be more stable. This correlates well with (i) stability constants for Cd–gly and Cd–sar reported here; and (ii) known stability constants of ML complex for glycine, sarcosine, IDA, and MIDA.     

Thermal decomposition study on mixed ligand thymine complexes of divalent nickel(II) with dianions of some dicarboxylic acids

Thermal decomposition of mixed ligand thymine (2,4-dihydroxy-5-methylpyrimidine) complexes of divalent Ni(II) with aspartate, glutamate and ADA (N-2-acetamido)iminodiacetate dianions was monitored by TG, DTG and DTA analysis in static atmosphere of air. The decomposition course and steps of complexes [Ni(C₅H₆N₂O₂)(C₄H₅NO₄)²⁻(H₂O)₂]·H₂O, [Ni(C₅H₆N₂O₂)(C₅H₇NO₄)²⁻(H₂O)₂]·H₂O and [Ni(C₅H₆N₂O₂)(C₆H₈N₂O₅)²⁻(H₂O)₂]·1.5H₂O were analyzed. The final decomposition products are found to be the corresponding metal oxides. The kinetic parameters namely, activation energy (E*), enthalpy (ΔH*), entropy (ΔS*) and free energy change of decomposition (ΔG*) are calculated from the TG curves using Coats–Redfern and Horowitz–Metzger equations. The stability order found for these complexes follows the trend aspartate > ADA > glutamate.     

Phenylbis(2- pyridyl)phosphine: P- vs. N,N′-coordination in carbonylmolybdenum-(O) and -(II) complexes

The first carbonyl molybdenum-(O) and -(II) complexes with phenylbis(2-pyridyl)phosphine (PPhpy₂) have been synthesized. PPhpy₂ reacts with [Mo(CO)₅(NCMe)] to give [Mo(CO)₅(PPhpy₂-P)]. With [Mo(CO)₄(NBD)] (NBD = norbornadiene) it gives [Mo(CO)₄(PPhpy₂-P)₂] when a 2 : 1 ratio is used, or [MO(CO)₄(py₂PhP---N,N′)] for a 1 : 1 ratio. Decarbonylation of any of these pyridylphosphine complexes leads to an oligomer of formula {MO(CO)₃(μ-PPhpy₂)}_n, which is also obtained after heating [MO(CO)₆] in solution with an equimolar amount of PPhpy₂. The oligomer undergoes oxidative addition by iodine or allylbromide to give [MoI₂(CO)₃(py₂PhP---N,N′)], or [MoBr(η³-CH₂CHCH₂)(CO)₂(py₂PhP---N,N′)], respectively. These complexes are also obtained by addition of equimolar amounts of PPhpy₂ to solutions of [MoI₂(CO)₃(NCMe)₂] and MoBr(η³-CH₂CH CH₂)(CO)₂(NCMe)₂, respectively. The ligand tends to act as a P-donor towards molybdenum(O) substrates, and as a chelating N,N′-donor in molybdenum (II) complexes.     

Syntheses of mixed ligands complexes of Ru(II) with 4,4′-dicarboxy-2,2′-bipyridine and substituted pteridinedione and the use of these complexes in electrochemical photovoltaic cells

The synthesis, spectral and photoelectrochemical studies of mixed ligand complexes of [Ru(dcbpy)₂(LL)]Cl₂, where LL=2,4-(1,3-N,N′-dimethyl)pteridinedione (DMP), 6,7-dimethyl-2,4-(1,3-N,N′-dimethyl)pteridinedione (MDMP), 6,7-diphenyl-2,4-(1,3-N,N′-dimethyl)pteridinedione (PhDMP), dibenzo[h,j]-(1,3-N,N′-dimethyl)isoalloxazine (BIAlo), 6,7-bis(pyrid-2-yl)-2,4-(1,3-N,N′-dimethyl) pteridinedione (PyDMP) were carried out. These complexes were attached to sol–gel processed TiO₂ electrodes and the photocells fabricated were illuminated with polychromatic radiation in the presence of I₂/I₃⁻ as redox electrolyte. The incident photon to current conversion efficiency determined was found to be 20–48%.     

Synthesis, crystal structure and magnetic behavior of two cobalt coordination polymers with 1,2-bis(1,2,4-triazol-1-yl)ethane and dicyanamide

Two cobalt(II) coordination polymers formed from bte (bte = 1,2-bis(1,2,4-triazol-1-yl)ethane), namely [Co(bte)₂(dca)₂]_n (1) and {[Co(bte)(dca)₂] · H₂O}_n (2), have been synthesized and characterized by elementary analyses, IR, thermogravimetric analyses, X-ray diffraction analyses and magnetic measurements. Compound 1 is a double-chain with Co(II) centers bridged by bte, containing metallocycles of [Co₂(bte)₂] and trans dca as termination ligands. In 2, each Co(II) center is bonded by two bridging bte ligands and four dca as μ-1,5-dca in different orientations in the 3D network.